* [ptxdist] [PATCH] rules/qemu: Add new package.
@ 2021-07-16 12:44 Christian Melki
2021-07-16 13:04 ` Alexander Dahl
2021-08-06 7:00 ` Michael Olbrich
0 siblings, 2 replies; 4+ messages in thread
From: Christian Melki @ 2021-07-16 12:44 UTC (permalink / raw)
To: ptxdist
Work-in-progress. Add target-qemu package.
Usecases are among others:
Higher isolation (security) and target emulation (software longevity).
Signed-off-by: Christian Melki <christian.melki@t2data.com>
---
rules/qemu.in | 51 +++++++++
rules/qemu.make | 274 ++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 325 insertions(+)
create mode 100644 rules/qemu.in
create mode 100644 rules/qemu.make
diff --git a/rules/qemu.in b/rules/qemu.in
new file mode 100644
index 000000000..d627f7a79
--- /dev/null
+++ b/rules/qemu.in
@@ -0,0 +1,51 @@
+## SECTION=emulators
+
+menuconfig QEMU
+ tristate
+ prompt "qemu "
+ select HOST_MESON
+ select HOST_NINJA
+ select HOST_SYSTEM_PYTHON3
+ select GLIB
+ select LIBCAP_NG
+ select ZLIB
+ select LIBUSB if QEMU_SYS
+ select PIXMAN if QEMU_SYS
+ help
+ QEMU is a generic and open source machine emulator and
+ virtualizer.
+
+if QEMU
+
+config QEMU_TARGETS
+ string
+ prompt "QEMU targets"
+ default "i386 x86_64 arm aarch64"
+ help
+ The list of QEMU user and system targets you want to build.
+ Only use the prefixes.
+
+config QEMU_FDT
+ bool
+ prompt "Enable Device Tree generation."
+ default y
+ help
+ Say y to let QEMU construct FDTs and pass them
+ to the VMs.
+
+config QEMU_TOOLS
+ bool
+ prompt "Enable tools"
+ default y
+ help
+ Say y here to include tools.
+
+config QEMU_SYS
+ bool
+ prompt "system emulation"
+
+config QEMU_USR
+ bool
+ prompt "user-space emulation"
+
+endif
diff --git a/rules/qemu.make b/rules/qemu.make
new file mode 100644
index 000000000..0a276fbf6
--- /dev/null
+++ b/rules/qemu.make
@@ -0,0 +1,274 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2021 by Christian Melki <christian.melki@t2data.com>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_QEMU) += qemu
+
+#
+# Paths and names
+#
+QEMU_VERSION := 6.0.0
+QEMU_MD5 := cce185dc0119546e395909e8a71a75bb
+QEMU := qemu-$(QEMU_VERSION)
+QEMU_SUFFIX := tar.xz
+QEMU_URL := https://download.qemu.org/$(QEMU).$(QEMU_SUFFIX)
+QEMU_SOURCE := $(SRCDIR)/$(QEMU).$(QEMU_SUFFIX)
+QEMU_DIR := $(BUILDDIR)/$(QEMU)
+QEMU_LICENSE := GPL-2.0-only AND GPL-2.0-or-later AND MIT AND BSD-1-Clause AND BSD-2-Clause AND BSD-3-Clause
+QEMU_BUILD_OOT := YES
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+ifdef PTXCONF_ARCH_X86
+QEMU_ARCH := i386
+ifdef PTXCONF_ARCH_X86_64
+QEMU_ARCH := x86_64
+endif
+endif
+ifdef PTXCONF_ARCH_ARM
+QEMU_ARCH := arm
+endif
+ifdef PTXCONF_ARCH_ARM64
+QEMU_ARCH := aarch64
+endif
+
+#
+# autoconf
+#
+
+QEMU_MAKE_OPT := V=$(filter 1,$(PTXDIST_VERBOSE))
+
+QEMU_SYS_TARGETS := $(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), $(patsubst %,%-softmmu,$(target)))
+QEMU_USR_TARGETS := $(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), $(patsubst %,%-linux-user,$(target)))
+
+QEMU_PATH := PATH=$(CROSS_PATH)
+
+QEMU_CONF_TOOL := autoconf
+# Note: not realy autoconf:
+# e.g. there is --enable-debug but not --disable-debug
+QEMU_CONF_OPT := \
+ --prefix=/usr \
+ --target-list=" \
+ $(call ptx/ifdef, PTXCONF_QEMU_SYS,$(QEMU_SYS_TARGETS),) \
+ $(call ptx/ifdef, PTXCONF_QEMU_USR,$(QEMU_USR_TARGETS),) \
+ " \
+ --meson=meson \
+ --ninja=ninja \
+ --cross-prefix=$(CROSS_COMPILE) \
+ --disable-sanitizers \
+ --disable-tsan \
+ --disable-strip \
+ --disable-werror \
+ --enable-stack-protector \
+ --audio-drv-list= \
+ --block-drv-rw-whitelist= \
+ --block-drv-ro-whitelist= \
+ --enable-trace-backends=nop \
+ --disable-tcg-interpreter \
+ --enable-malloc-trim \
+ --with-coroutine= \
+ --tls-priority=NORMAL \
+ --disable-plugins \
+ --disable-containers \
+ --$(call ptx/endis, PTXCONF_QEMU_SYS)-system \
+ --disable-user \
+ --$(call ptx/endis, PTXCONF_QEMU_USR)-linux-user \
+ --disable-bsd-user \
+ --disable-docs \
+ --disable-guest-agent \
+ --disable-guest-agent-msi \
+ --enable-pie \
+ --disable-modules \
+ --disable-module-upgrades \
+ --disable-debug-tcg \
+ --disable-debug-info \
+ --disable-lto \
+ --disable-sparse \
+ --disable-safe-stack \
+ --disable-cfi \
+ --disable-gnutls \
+ --disable-nettle \
+ --disable-gcrypt \
+ --disable-auth-pam \
+ --disable-sdl \
+ --disable-sdl-image \
+ --disable-gtk \
+ --disable-vte \
+ --disable-curses \
+ --enable-iconv \
+ --disable-vnc \
+ --disable-vnc-sasl \
+ --disable-vnc-jpeg \
+ --disable-vnc-png \
+ --disable-cocoa \
+ --enable-virtfs \
+ --disable-virtiofsd \
+ --disable-libudev \
+ --disable-mpath \
+ --disable-xen \
+ --disable-xen-pci-passthrough \
+ --disable-brlapi \
+ --disable-curl \
+ --enable-membarrier \
+ --$(call ptx/endis, PTXCONF_QEMU_FDT)-fdt \
+ --enable-kvm \
+ --disable-hax \
+ --disable-hvf \
+ --disable-whpx \
+ --disable-rdma \
+ --disable-pvrdma \
+ --disable-netmap \
+ --disable-linux-aio \
+ --disable-linux-io-uring \
+ --enable-cap-ng \
+ --enable-attr \
+ --enable-vhost-net \
+ --enable-vhost-vsock \
+ --enable-vhost-scsi \
+ --disable-vhost-crypto \
+ --enable-vhost-kernel \
+ --disable-vhost-user \
+ --disable-vhost-user-blk-server \
+ --disable-vhost-vdpa \
+ --disable-spice \
+ --disable-rbd \
+ --disable-libiscsi \
+ --disable-libnfs \
+ --disable-smartcard \
+ --disable-u2f \
+ --$(call ptx/endis, PTXCONF_QEMU_SYS)-libusb \
+ --disable-live-block-migration \
+ --disable-usb-redir \
+ --disable-lzo \
+ --disable-snappy \
+ --disable-bzip2 \
+ --disable-lzfse \
+ --disable-zstd \
+ --disable-seccomp \
+ --enable-coroutine-pool \
+ --disable-glusterfs \
+ --disable-tpm \
+ --disable-libssh \
+ --disable-numa \
+ --disable-libxml2 \
+ --disable-tcmalloc \
+ --disable-jemalloc \
+ --enable-replication \
+ --disable-opengl \
+ --disable-virglrenderer \
+ --disable-xfsctl \
+ --disable-qom-cast-debug \
+ --$(call ptx/endis, PTXCONF_QEMU_TOOLS)-tools \
+ --disable-bochs \
+ --disable-cloop \
+ --disable-dmg \
+ --disable-qcow1 \
+ --disable-vdi \
+ --disable-vvfat \
+ --disable-qed \
+ --disable-parallels \
+ --disable-sheepdog \
+ --disable-crypto-afalg \
+ --disable-capstone \
+ --disable-debug-mutex \
+ --disable-libpmem \
+ --disable-xkbcommon \
+ --disable-rng-none \
+ --disable-libdaxctl \
+ --disable-fuse \
+ --enable-multiprocess \
+ --disable-gio \
+ \
+ --disable-fuzzing \
+ --disable-keyring
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/qemu.install:
+ @$(call targetinfo)
+ @$(call world/install, QEMU)
+ifdef PTXCONF_QEMU_SYS
+# # necessary for qemu to find its ROM files
+ @ln -vsf usr/share/qemu $(QEMU_PKGDIR)/pc-bios
+endif
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/qemu.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, qemu)
+ @$(call install_fixup, qemu,PRIORITY,optional)
+ @$(call install_fixup, qemu,SECTION,base)
+ @$(call install_fixup, qemu,AUTHOR,"Christian Melki <christian.melki@t2data.com>")
+ @$(call install_fixup, qemu,DESCRIPTION,missing)
+
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-edid)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-img)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-io)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-pr-helper)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-storage-daemon)
+ifdef PTXCONF_QEMU_SYS
+ @$(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), \
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-system-$(target))$(ptx/nl))
+endif
+ifdef PTXCONF_QEMU_USER
+ @$(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), \
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-system-$(target))$(ptx/nl))
+endif
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/libexec/qemu-bridge-helper)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/libexec/virtfs-proxy-helper)
+
+ @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios-256k.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios-microvm.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-aarch64-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-arm-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-arm-vars.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-secure-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-vars.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-x86_64-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-x86_64-secure-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-e1000.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-e1000e.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-eepro100.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-virtio.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-e1000.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-eepro100.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-virtio.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pvh.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/kvmvapic.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-ati.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-cirrus.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-stdvga.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-virtio.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-vmware.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios.bin)
+
+ @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu/firmware)
+ @$(call install_glob, qemu, 0, 0, -, /usr/share/qemu/firmware,, *.json)
+
+ @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu/keymaps)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/share/qemu/keymaps/en-us)
+
+ @$(call install_finish, qemu)
+
+ @$(call touch)
+
+# vim: syntax=make
--
2.32.0
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ptxdist] [PATCH] rules/qemu: Add new package.
2021-07-16 12:44 [ptxdist] [PATCH] rules/qemu: Add new package Christian Melki
@ 2021-07-16 13:04 ` Alexander Dahl
2021-08-06 7:00 ` Michael Olbrich
1 sibling, 0 replies; 4+ messages in thread
From: Alexander Dahl @ 2021-07-16 13:04 UTC (permalink / raw)
To: ptxdist
[-- Attachment #1.1: Type: text/plain, Size: 12525 bytes --]
Hello Christian,
On Fri, Jul 16, 2021 at 02:44:23PM +0200, Christian Melki wrote:
> Work-in-progress. Add target-qemu package.
You can prefix the subject with "WIP:" or use `git format-patch --rfc`
to clearly show the intention, if something is not yet ready for
merging. ;-)
Greets
Alex
> Usecases are among others:
> Higher isolation (security) and target emulation (software longevity).
>
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> ---
> rules/qemu.in | 51 +++++++++
> rules/qemu.make | 274 ++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 325 insertions(+)
> create mode 100644 rules/qemu.in
> create mode 100644 rules/qemu.make
>
> diff --git a/rules/qemu.in b/rules/qemu.in
> new file mode 100644
> index 000000000..d627f7a79
> --- /dev/null
> +++ b/rules/qemu.in
> @@ -0,0 +1,51 @@
> +## SECTION=emulators
> +
> +menuconfig QEMU
> + tristate
> + prompt "qemu "
> + select HOST_MESON
> + select HOST_NINJA
> + select HOST_SYSTEM_PYTHON3
> + select GLIB
> + select LIBCAP_NG
> + select ZLIB
> + select LIBUSB if QEMU_SYS
> + select PIXMAN if QEMU_SYS
> + help
> + QEMU is a generic and open source machine emulator and
> + virtualizer.
> +
> +if QEMU
> +
> +config QEMU_TARGETS
> + string
> + prompt "QEMU targets"
> + default "i386 x86_64 arm aarch64"
> + help
> + The list of QEMU user and system targets you want to build.
> + Only use the prefixes.
> +
> +config QEMU_FDT
> + bool
> + prompt "Enable Device Tree generation."
> + default y
> + help
> + Say y to let QEMU construct FDTs and pass them
> + to the VMs.
> +
> +config QEMU_TOOLS
> + bool
> + prompt "Enable tools"
> + default y
> + help
> + Say y here to include tools.
> +
> +config QEMU_SYS
> + bool
> + prompt "system emulation"
> +
> +config QEMU_USR
> + bool
> + prompt "user-space emulation"
> +
> +endif
> diff --git a/rules/qemu.make b/rules/qemu.make
> new file mode 100644
> index 000000000..0a276fbf6
> --- /dev/null
> +++ b/rules/qemu.make
> @@ -0,0 +1,274 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2021 by Christian Melki <christian.melki@t2data.com>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_QEMU) += qemu
> +
> +#
> +# Paths and names
> +#
> +QEMU_VERSION := 6.0.0
> +QEMU_MD5 := cce185dc0119546e395909e8a71a75bb
> +QEMU := qemu-$(QEMU_VERSION)
> +QEMU_SUFFIX := tar.xz
> +QEMU_URL := https://download.qemu.org/$(QEMU).$(QEMU_SUFFIX)
> +QEMU_SOURCE := $(SRCDIR)/$(QEMU).$(QEMU_SUFFIX)
> +QEMU_DIR := $(BUILDDIR)/$(QEMU)
> +QEMU_LICENSE := GPL-2.0-only AND GPL-2.0-or-later AND MIT AND BSD-1-Clause AND BSD-2-Clause AND BSD-3-Clause
> +QEMU_BUILD_OOT := YES
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +ifdef PTXCONF_ARCH_X86
> +QEMU_ARCH := i386
> +ifdef PTXCONF_ARCH_X86_64
> +QEMU_ARCH := x86_64
> +endif
> +endif
> +ifdef PTXCONF_ARCH_ARM
> +QEMU_ARCH := arm
> +endif
> +ifdef PTXCONF_ARCH_ARM64
> +QEMU_ARCH := aarch64
> +endif
> +
> +#
> +# autoconf
> +#
> +
> +QEMU_MAKE_OPT := V=$(filter 1,$(PTXDIST_VERBOSE))
> +
> +QEMU_SYS_TARGETS := $(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), $(patsubst %,%-softmmu,$(target)))
> +QEMU_USR_TARGETS := $(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), $(patsubst %,%-linux-user,$(target)))
> +
> +QEMU_PATH := PATH=$(CROSS_PATH)
> +
> +QEMU_CONF_TOOL := autoconf
> +# Note: not realy autoconf:
> +# e.g. there is --enable-debug but not --disable-debug
> +QEMU_CONF_OPT := \
> + --prefix=/usr \
> + --target-list=" \
> + $(call ptx/ifdef, PTXCONF_QEMU_SYS,$(QEMU_SYS_TARGETS),) \
> + $(call ptx/ifdef, PTXCONF_QEMU_USR,$(QEMU_USR_TARGETS),) \
> + " \
> + --meson=meson \
> + --ninja=ninja \
> + --cross-prefix=$(CROSS_COMPILE) \
> + --disable-sanitizers \
> + --disable-tsan \
> + --disable-strip \
> + --disable-werror \
> + --enable-stack-protector \
> + --audio-drv-list= \
> + --block-drv-rw-whitelist= \
> + --block-drv-ro-whitelist= \
> + --enable-trace-backends=nop \
> + --disable-tcg-interpreter \
> + --enable-malloc-trim \
> + --with-coroutine= \
> + --tls-priority=NORMAL \
> + --disable-plugins \
> + --disable-containers \
> + --$(call ptx/endis, PTXCONF_QEMU_SYS)-system \
> + --disable-user \
> + --$(call ptx/endis, PTXCONF_QEMU_USR)-linux-user \
> + --disable-bsd-user \
> + --disable-docs \
> + --disable-guest-agent \
> + --disable-guest-agent-msi \
> + --enable-pie \
> + --disable-modules \
> + --disable-module-upgrades \
> + --disable-debug-tcg \
> + --disable-debug-info \
> + --disable-lto \
> + --disable-sparse \
> + --disable-safe-stack \
> + --disable-cfi \
> + --disable-gnutls \
> + --disable-nettle \
> + --disable-gcrypt \
> + --disable-auth-pam \
> + --disable-sdl \
> + --disable-sdl-image \
> + --disable-gtk \
> + --disable-vte \
> + --disable-curses \
> + --enable-iconv \
> + --disable-vnc \
> + --disable-vnc-sasl \
> + --disable-vnc-jpeg \
> + --disable-vnc-png \
> + --disable-cocoa \
> + --enable-virtfs \
> + --disable-virtiofsd \
> + --disable-libudev \
> + --disable-mpath \
> + --disable-xen \
> + --disable-xen-pci-passthrough \
> + --disable-brlapi \
> + --disable-curl \
> + --enable-membarrier \
> + --$(call ptx/endis, PTXCONF_QEMU_FDT)-fdt \
> + --enable-kvm \
> + --disable-hax \
> + --disable-hvf \
> + --disable-whpx \
> + --disable-rdma \
> + --disable-pvrdma \
> + --disable-netmap \
> + --disable-linux-aio \
> + --disable-linux-io-uring \
> + --enable-cap-ng \
> + --enable-attr \
> + --enable-vhost-net \
> + --enable-vhost-vsock \
> + --enable-vhost-scsi \
> + --disable-vhost-crypto \
> + --enable-vhost-kernel \
> + --disable-vhost-user \
> + --disable-vhost-user-blk-server \
> + --disable-vhost-vdpa \
> + --disable-spice \
> + --disable-rbd \
> + --disable-libiscsi \
> + --disable-libnfs \
> + --disable-smartcard \
> + --disable-u2f \
> + --$(call ptx/endis, PTXCONF_QEMU_SYS)-libusb \
> + --disable-live-block-migration \
> + --disable-usb-redir \
> + --disable-lzo \
> + --disable-snappy \
> + --disable-bzip2 \
> + --disable-lzfse \
> + --disable-zstd \
> + --disable-seccomp \
> + --enable-coroutine-pool \
> + --disable-glusterfs \
> + --disable-tpm \
> + --disable-libssh \
> + --disable-numa \
> + --disable-libxml2 \
> + --disable-tcmalloc \
> + --disable-jemalloc \
> + --enable-replication \
> + --disable-opengl \
> + --disable-virglrenderer \
> + --disable-xfsctl \
> + --disable-qom-cast-debug \
> + --$(call ptx/endis, PTXCONF_QEMU_TOOLS)-tools \
> + --disable-bochs \
> + --disable-cloop \
> + --disable-dmg \
> + --disable-qcow1 \
> + --disable-vdi \
> + --disable-vvfat \
> + --disable-qed \
> + --disable-parallels \
> + --disable-sheepdog \
> + --disable-crypto-afalg \
> + --disable-capstone \
> + --disable-debug-mutex \
> + --disable-libpmem \
> + --disable-xkbcommon \
> + --disable-rng-none \
> + --disable-libdaxctl \
> + --disable-fuse \
> + --enable-multiprocess \
> + --disable-gio \
> + \
> + --disable-fuzzing \
> + --disable-keyring
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/qemu.install:
> + @$(call targetinfo)
> + @$(call world/install, QEMU)
> +ifdef PTXCONF_QEMU_SYS
> +# # necessary for qemu to find its ROM files
> + @ln -vsf usr/share/qemu $(QEMU_PKGDIR)/pc-bios
> +endif
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/qemu.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, qemu)
> + @$(call install_fixup, qemu,PRIORITY,optional)
> + @$(call install_fixup, qemu,SECTION,base)
> + @$(call install_fixup, qemu,AUTHOR,"Christian Melki <christian.melki@t2data.com>")
> + @$(call install_fixup, qemu,DESCRIPTION,missing)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-edid)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-img)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-io)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-pr-helper)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-storage-daemon)
> +ifdef PTXCONF_QEMU_SYS
> + @$(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), \
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-system-$(target))$(ptx/nl))
> +endif
> +ifdef PTXCONF_QEMU_USER
> + @$(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), \
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-system-$(target))$(ptx/nl))
> +endif
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/libexec/qemu-bridge-helper)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/libexec/virtfs-proxy-helper)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios-256k.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios-microvm.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-aarch64-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-arm-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-arm-vars.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-secure-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-vars.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-x86_64-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-x86_64-secure-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-e1000.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-e1000e.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-eepro100.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-virtio.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-e1000.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-eepro100.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-virtio.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pvh.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/kvmvapic.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-ati.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-cirrus.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-stdvga.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-virtio.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-vmware.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios.bin)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu/firmware)
> + @$(call install_glob, qemu, 0, 0, -, /usr/share/qemu/firmware,, *.json)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu/keymaps)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/share/qemu/keymaps/en-us)
> +
> + @$(call install_finish, qemu)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> --
> 2.32.0
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
--
/"\ ASCII RIBBON | »With the first link, the chain is forged. The first
\ / CAMPAIGN | speech censured, the first thought forbidden, the
X AGAINST | first freedom denied, chains us all irrevocably.«
/ \ HTML MAIL | (Jean-Luc Picard, quoting Judge Aaron Satie)
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 181 bytes --]
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ptxdist] [PATCH] rules/qemu: Add new package.
2021-07-16 12:44 [ptxdist] [PATCH] rules/qemu: Add new package Christian Melki
2021-07-16 13:04 ` Alexander Dahl
@ 2021-08-06 7:00 ` Michael Olbrich
1 sibling, 0 replies; 4+ messages in thread
From: Michael Olbrich @ 2021-08-06 7:00 UTC (permalink / raw)
To: Christian Melki; +Cc: ptxdist
On Fri, Jul 16, 2021 at 02:44:23PM +0200, Christian Melki wrote:
> Work-in-progress. Add target-qemu package.
> Usecases are among others:
> Higher isolation (security) and target emulation (software longevity).
>
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> ---
> rules/qemu.in | 51 +++++++++
> rules/qemu.make | 274 ++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 325 insertions(+)
> create mode 100644 rules/qemu.in
> create mode 100644 rules/qemu.make
>
> diff --git a/rules/qemu.in b/rules/qemu.in
> new file mode 100644
> index 000000000..d627f7a79
> --- /dev/null
> +++ b/rules/qemu.in
> @@ -0,0 +1,51 @@
> +## SECTION=emulators
> +
> +menuconfig QEMU
> + tristate
> + prompt "qemu "
> + select HOST_MESON
> + select HOST_NINJA
> + select HOST_SYSTEM_PYTHON3
> + select GLIB
> + select LIBCAP_NG
> + select ZLIB
> + select LIBUSB if QEMU_SYS
> + select PIXMAN if QEMU_SYS
> + help
> + QEMU is a generic and open source machine emulator and
> + virtualizer.
Remove trailing whitespaces
> +
> +if QEMU
> +
> +config QEMU_TARGETS
> + string
intent with tab.
> + prompt "QEMU targets"
> + default "i386 x86_64 arm aarch64"
> + help
> + The list of QEMU user and system targets you want to build.
> + Only use the prefixes.
> +
> +config QEMU_FDT
> + bool
> + prompt "Enable Device Tree generation."
> + default y
> + help
> + Say y to let QEMU construct FDTs and pass them
indention
> + to the VMs.
Why make this optional? I don't think the overhead is that big, so maybe
just enable it unconditionally.
> +
> +config QEMU_TOOLS
> + bool
> + prompt "Enable tools"
> + default y
> + help
> + Say y here to include tools.
Hmmm, this is used for configure, but not in the targetinstall stage. That
looks suspicious.
> +
> +config QEMU_SYS
> + bool
> + prompt "system emulation"
> +
> +config QEMU_USR
> + bool
> + prompt "user-space emulation"
> +
> +endif
> diff --git a/rules/qemu.make b/rules/qemu.make
> new file mode 100644
> index 000000000..0a276fbf6
> --- /dev/null
> +++ b/rules/qemu.make
> @@ -0,0 +1,274 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2021 by Christian Melki <christian.melki@t2data.com>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_QEMU) += qemu
> +
> +#
> +# Paths and names
> +#
> +QEMU_VERSION := 6.0.0
> +QEMU_MD5 := cce185dc0119546e395909e8a71a75bb
> +QEMU := qemu-$(QEMU_VERSION)
> +QEMU_SUFFIX := tar.xz
> +QEMU_URL := https://download.qemu.org/$(QEMU).$(QEMU_SUFFIX)
> +QEMU_SOURCE := $(SRCDIR)/$(QEMU).$(QEMU_SUFFIX)
> +QEMU_DIR := $(BUILDDIR)/$(QEMU)
> +QEMU_LICENSE := GPL-2.0-only AND GPL-2.0-or-later AND MIT AND BSD-1-Clause AND BSD-2-Clause AND BSD-3-Clause
> +QEMU_BUILD_OOT := YES
Please remove the corresponding lines in host-qemu.in. It will then default
to this here.
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +ifdef PTXCONF_ARCH_X86
> +QEMU_ARCH := i386
> +ifdef PTXCONF_ARCH_X86_64
> +QEMU_ARCH := x86_64
> +endif
> +endif
> +ifdef PTXCONF_ARCH_ARM
> +QEMU_ARCH := arm
> +endif
> +ifdef PTXCONF_ARCH_ARM64
> +QEMU_ARCH := aarch64
> +endif
Unused?
> +
> +#
> +# autoconf
> +#
> +
> +QEMU_MAKE_OPT := V=$(filter 1,$(PTXDIST_VERBOSE))
> +
> +QEMU_SYS_TARGETS := $(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), $(patsubst %,%-softmmu,$(target)))
> +QEMU_USR_TARGETS := $(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), $(patsubst %,%-linux-user,$(target)))
> +
> +QEMU_PATH := PATH=$(CROSS_PATH)
> +
> +QEMU_CONF_TOOL := autoconf
> +# Note: not realy autoconf:
> +# e.g. there is --enable-debug but not --disable-debug
> +QEMU_CONF_OPT := \
> + --prefix=/usr \
> + --target-list=" \
> + $(call ptx/ifdef, PTXCONF_QEMU_SYS,$(QEMU_SYS_TARGETS),) \
> + $(call ptx/ifdef, PTXCONF_QEMU_USR,$(QEMU_USR_TARGETS),) \
> + " \
> + --meson=meson \
> + --ninja=ninja \
> + --cross-prefix=$(CROSS_COMPILE) \
> + --disable-sanitizers \
> + --disable-tsan \
> + --disable-strip \
> + --disable-werror \
> + --enable-stack-protector \
> + --audio-drv-list= \
> + --block-drv-rw-whitelist= \
> + --block-drv-ro-whitelist= \
> + --enable-trace-backends=nop \
> + --disable-tcg-interpreter \
> + --enable-malloc-trim \
> + --with-coroutine= \
> + --tls-priority=NORMAL \
> + --disable-plugins \
> + --disable-containers \
> + --$(call ptx/endis, PTXCONF_QEMU_SYS)-system \
> + --disable-user \
> + --$(call ptx/endis, PTXCONF_QEMU_USR)-linux-user \
> + --disable-bsd-user \
> + --disable-docs \
> + --disable-guest-agent \
> + --disable-guest-agent-msi \
> + --enable-pie \
> + --disable-modules \
> + --disable-module-upgrades \
> + --disable-debug-tcg \
> + --disable-debug-info \
> + --disable-lto \
> + --disable-sparse \
> + --disable-safe-stack \
> + --disable-cfi \
> + --disable-gnutls \
> + --disable-nettle \
> + --disable-gcrypt \
> + --disable-auth-pam \
> + --disable-sdl \
> + --disable-sdl-image \
> + --disable-gtk \
> + --disable-vte \
> + --disable-curses \
> + --enable-iconv \
> + --disable-vnc \
> + --disable-vnc-sasl \
> + --disable-vnc-jpeg \
> + --disable-vnc-png \
> + --disable-cocoa \
> + --enable-virtfs \
Check with the latest changes of host-qemu. This breaks without
qemu-system.
> + --disable-virtiofsd \
> + --disable-libudev \
> + --disable-mpath \
> + --disable-xen \
> + --disable-xen-pci-passthrough \
> + --disable-brlapi \
> + --disable-curl \
> + --enable-membarrier \
> + --$(call ptx/endis, PTXCONF_QEMU_FDT)-fdt \
> + --enable-kvm \
> + --disable-hax \
> + --disable-hvf \
> + --disable-whpx \
> + --disable-rdma \
> + --disable-pvrdma \
> + --disable-netmap \
> + --disable-linux-aio \
> + --disable-linux-io-uring \
> + --enable-cap-ng \
> + --enable-attr \
> + --enable-vhost-net \
> + --enable-vhost-vsock \
> + --enable-vhost-scsi \
> + --disable-vhost-crypto \
> + --enable-vhost-kernel \
> + --disable-vhost-user \
> + --disable-vhost-user-blk-server \
> + --disable-vhost-vdpa \
> + --disable-spice \
> + --disable-rbd \
> + --disable-libiscsi \
> + --disable-libnfs \
> + --disable-smartcard \
> + --disable-u2f \
> + --$(call ptx/endis, PTXCONF_QEMU_SYS)-libusb \
> + --disable-live-block-migration \
> + --disable-usb-redir \
> + --disable-lzo \
> + --disable-snappy \
> + --disable-bzip2 \
> + --disable-lzfse \
> + --disable-zstd \
> + --disable-seccomp \
> + --enable-coroutine-pool \
> + --disable-glusterfs \
> + --disable-tpm \
> + --disable-libssh \
> + --disable-numa \
> + --disable-libxml2 \
> + --disable-tcmalloc \
> + --disable-jemalloc \
> + --enable-replication \
> + --disable-opengl \
> + --disable-virglrenderer \
> + --disable-xfsctl \
> + --disable-qom-cast-debug \
> + --$(call ptx/endis, PTXCONF_QEMU_TOOLS)-tools \
> + --disable-bochs \
> + --disable-cloop \
> + --disable-dmg \
> + --disable-qcow1 \
> + --disable-vdi \
> + --disable-vvfat \
> + --disable-qed \
> + --disable-parallels \
> + --disable-sheepdog \
> + --disable-crypto-afalg \
> + --disable-capstone \
> + --disable-debug-mutex \
> + --disable-libpmem \
> + --disable-xkbcommon \
> + --disable-rng-none \
> + --disable-libdaxctl \
> + --disable-fuse \
> + --enable-multiprocess \
> + --disable-gio \
> + \
> + --disable-fuzzing \
> + --disable-keyring
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/qemu.install:
> + @$(call targetinfo)
> + @$(call world/install, QEMU)
> +ifdef PTXCONF_QEMU_SYS
> +# # necessary for qemu to find its ROM files
> + @ln -vsf usr/share/qemu $(QEMU_PKGDIR)/pc-bios
> +endif
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/qemu.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, qemu)
> + @$(call install_fixup, qemu,PRIORITY,optional)
> + @$(call install_fixup, qemu,SECTION,base)
> + @$(call install_fixup, qemu,AUTHOR,"Christian Melki <christian.melki@t2data.com>")
> + @$(call install_fixup, qemu,DESCRIPTION,missing)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-edid)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-img)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-io)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-pr-helper)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-storage-daemon)
> +ifdef PTXCONF_QEMU_SYS
> + @$(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), \
QEMU_TARGETS := $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)
somewhere above and use it here
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-system-$(target))$(ptx/nl))
> +endif
> +ifdef PTXCONF_QEMU_USER
> + @$(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), \
and here.
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-system-$(target))$(ptx/nl))
> +endif
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/libexec/qemu-bridge-helper)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/libexec/virtfs-proxy-helper)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios-256k.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios-microvm.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-aarch64-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-arm-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-arm-vars.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-secure-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-vars.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-x86_64-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-x86_64-secure-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-e1000.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-e1000e.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-eepro100.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-virtio.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-e1000.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-eepro100.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-virtio.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pvh.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/kvmvapic.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-ati.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-cirrus.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-stdvga.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-virtio.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-vmware.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios.bin)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu/firmware)
> + @$(call install_glob, qemu, 0, 0, -, /usr/share/qemu/firmware,, *.json)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu/keymaps)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/share/qemu/keymaps/en-us)
I think this stuff is only used for qemu-system. And a lot of it is
architecture dependent so add some:
ifneq ($(filter i386 x86_64,$(QEMU_TARGETS),)
ifneq ($(filter aarch64,$(QEMU_TARGETS),)
and stuff like that.
Michael
> +
> + @$(call install_finish, qemu)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> --
> 2.32.0
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ptxdist] [PATCH] rules/qemu: Add new package.
@ 2021-07-16 10:27 Christian Melki
0 siblings, 0 replies; 4+ messages in thread
From: Christian Melki @ 2021-07-16 10:27 UTC (permalink / raw)
To: ptxdist
Work-in-progress. Add target-qemu package.
Usecases are among others:
Higher isolation (security) and target emulation (software longevity).
Signed-off-by: Christian Melki <christian.melki@t2data.com>
---
rules/qemu.in | 51 +++++++++
rules/qemu.make | 274 ++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 325 insertions(+)
create mode 100644 rules/qemu.in
create mode 100644 rules/qemu.make
diff --git a/rules/qemu.in b/rules/qemu.in
new file mode 100644
index 000000000..d627f7a79
--- /dev/null
+++ b/rules/qemu.in
@@ -0,0 +1,51 @@
+## SECTION=emulators
+
+menuconfig QEMU
+ tristate
+ prompt "qemu "
+ select HOST_MESON
+ select HOST_NINJA
+ select HOST_SYSTEM_PYTHON3
+ select GLIB
+ select LIBCAP_NG
+ select ZLIB
+ select LIBUSB if QEMU_SYS
+ select PIXMAN if QEMU_SYS
+ help
+ QEMU is a generic and open source machine emulator and
+ virtualizer.
+
+if QEMU
+
+config QEMU_TARGETS
+ string
+ prompt "QEMU targets"
+ default "i386 x86_64 arm aarch64"
+ help
+ The list of QEMU user and system targets you want to build.
+ Only use the prefixes.
+
+config QEMU_FDT
+ bool
+ prompt "Enable Device Tree generation."
+ default y
+ help
+ Say y to let QEMU construct FDTs and pass them
+ to the VMs.
+
+config QEMU_TOOLS
+ bool
+ prompt "Enable tools"
+ default y
+ help
+ Say y here to include tools.
+
+config QEMU_SYS
+ bool
+ prompt "system emulation"
+
+config QEMU_USR
+ bool
+ prompt "user-space emulation"
+
+endif
diff --git a/rules/qemu.make b/rules/qemu.make
new file mode 100644
index 000000000..0a276fbf6
--- /dev/null
+++ b/rules/qemu.make
@@ -0,0 +1,274 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2021 by Christian Melki <christian.melki@t2data.com>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_QEMU) += qemu
+
+#
+# Paths and names
+#
+QEMU_VERSION := 6.0.0
+QEMU_MD5 := cce185dc0119546e395909e8a71a75bb
+QEMU := qemu-$(QEMU_VERSION)
+QEMU_SUFFIX := tar.xz
+QEMU_URL := https://download.qemu.org/$(QEMU).$(QEMU_SUFFIX)
+QEMU_SOURCE := $(SRCDIR)/$(QEMU).$(QEMU_SUFFIX)
+QEMU_DIR := $(BUILDDIR)/$(QEMU)
+QEMU_LICENSE := GPL-2.0-only AND GPL-2.0-or-later AND MIT AND BSD-1-Clause AND BSD-2-Clause AND BSD-3-Clause
+QEMU_BUILD_OOT := YES
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+ifdef PTXCONF_ARCH_X86
+QEMU_ARCH := i386
+ifdef PTXCONF_ARCH_X86_64
+QEMU_ARCH := x86_64
+endif
+endif
+ifdef PTXCONF_ARCH_ARM
+QEMU_ARCH := arm
+endif
+ifdef PTXCONF_ARCH_ARM64
+QEMU_ARCH := aarch64
+endif
+
+#
+# autoconf
+#
+
+QEMU_MAKE_OPT := V=$(filter 1,$(PTXDIST_VERBOSE))
+
+QEMU_SYS_TARGETS := $(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), $(patsubst %,%-softmmu,$(target)))
+QEMU_USR_TARGETS := $(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), $(patsubst %,%-linux-user,$(target)))
+
+QEMU_PATH := PATH=$(CROSS_PATH)
+
+QEMU_CONF_TOOL := autoconf
+# Note: not realy autoconf:
+# e.g. there is --enable-debug but not --disable-debug
+QEMU_CONF_OPT := \
+ --prefix=/usr \
+ --target-list=" \
+ $(call ptx/ifdef, PTXCONF_QEMU_SYS,$(QEMU_SYS_TARGETS),) \
+ $(call ptx/ifdef, PTXCONF_QEMU_USR,$(QEMU_USR_TARGETS),) \
+ " \
+ --meson=meson \
+ --ninja=ninja \
+ --cross-prefix=$(CROSS_COMPILE) \
+ --disable-sanitizers \
+ --disable-tsan \
+ --disable-strip \
+ --disable-werror \
+ --enable-stack-protector \
+ --audio-drv-list= \
+ --block-drv-rw-whitelist= \
+ --block-drv-ro-whitelist= \
+ --enable-trace-backends=nop \
+ --disable-tcg-interpreter \
+ --enable-malloc-trim \
+ --with-coroutine= \
+ --tls-priority=NORMAL \
+ --disable-plugins \
+ --disable-containers \
+ --$(call ptx/endis, PTXCONF_QEMU_SYS)-system \
+ --disable-user \
+ --$(call ptx/endis, PTXCONF_QEMU_USR)-linux-user \
+ --disable-bsd-user \
+ --disable-docs \
+ --disable-guest-agent \
+ --disable-guest-agent-msi \
+ --enable-pie \
+ --disable-modules \
+ --disable-module-upgrades \
+ --disable-debug-tcg \
+ --disable-debug-info \
+ --disable-lto \
+ --disable-sparse \
+ --disable-safe-stack \
+ --disable-cfi \
+ --disable-gnutls \
+ --disable-nettle \
+ --disable-gcrypt \
+ --disable-auth-pam \
+ --disable-sdl \
+ --disable-sdl-image \
+ --disable-gtk \
+ --disable-vte \
+ --disable-curses \
+ --enable-iconv \
+ --disable-vnc \
+ --disable-vnc-sasl \
+ --disable-vnc-jpeg \
+ --disable-vnc-png \
+ --disable-cocoa \
+ --enable-virtfs \
+ --disable-virtiofsd \
+ --disable-libudev \
+ --disable-mpath \
+ --disable-xen \
+ --disable-xen-pci-passthrough \
+ --disable-brlapi \
+ --disable-curl \
+ --enable-membarrier \
+ --$(call ptx/endis, PTXCONF_QEMU_FDT)-fdt \
+ --enable-kvm \
+ --disable-hax \
+ --disable-hvf \
+ --disable-whpx \
+ --disable-rdma \
+ --disable-pvrdma \
+ --disable-netmap \
+ --disable-linux-aio \
+ --disable-linux-io-uring \
+ --enable-cap-ng \
+ --enable-attr \
+ --enable-vhost-net \
+ --enable-vhost-vsock \
+ --enable-vhost-scsi \
+ --disable-vhost-crypto \
+ --enable-vhost-kernel \
+ --disable-vhost-user \
+ --disable-vhost-user-blk-server \
+ --disable-vhost-vdpa \
+ --disable-spice \
+ --disable-rbd \
+ --disable-libiscsi \
+ --disable-libnfs \
+ --disable-smartcard \
+ --disable-u2f \
+ --$(call ptx/endis, PTXCONF_QEMU_SYS)-libusb \
+ --disable-live-block-migration \
+ --disable-usb-redir \
+ --disable-lzo \
+ --disable-snappy \
+ --disable-bzip2 \
+ --disable-lzfse \
+ --disable-zstd \
+ --disable-seccomp \
+ --enable-coroutine-pool \
+ --disable-glusterfs \
+ --disable-tpm \
+ --disable-libssh \
+ --disable-numa \
+ --disable-libxml2 \
+ --disable-tcmalloc \
+ --disable-jemalloc \
+ --enable-replication \
+ --disable-opengl \
+ --disable-virglrenderer \
+ --disable-xfsctl \
+ --disable-qom-cast-debug \
+ --$(call ptx/endis, PTXCONF_QEMU_TOOLS)-tools \
+ --disable-bochs \
+ --disable-cloop \
+ --disable-dmg \
+ --disable-qcow1 \
+ --disable-vdi \
+ --disable-vvfat \
+ --disable-qed \
+ --disable-parallels \
+ --disable-sheepdog \
+ --disable-crypto-afalg \
+ --disable-capstone \
+ --disable-debug-mutex \
+ --disable-libpmem \
+ --disable-xkbcommon \
+ --disable-rng-none \
+ --disable-libdaxctl \
+ --disable-fuse \
+ --enable-multiprocess \
+ --disable-gio \
+ \
+ --disable-fuzzing \
+ --disable-keyring
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/qemu.install:
+ @$(call targetinfo)
+ @$(call world/install, QEMU)
+ifdef PTXCONF_QEMU_SYS
+# # necessary for qemu to find its ROM files
+ @ln -vsf usr/share/qemu $(QEMU_PKGDIR)/pc-bios
+endif
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/qemu.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, qemu)
+ @$(call install_fixup, qemu,PRIORITY,optional)
+ @$(call install_fixup, qemu,SECTION,base)
+ @$(call install_fixup, qemu,AUTHOR,"Christian Melki <christian.melki@t2data.com>")
+ @$(call install_fixup, qemu,DESCRIPTION,missing)
+
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-edid)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-img)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-io)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-pr-helper)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-storage-daemon)
+ifdef PTXCONF_QEMU_SYS
+ @$(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), \
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-system-$(target))$(ptx/nl))
+endif
+ifdef PTXCONF_QEMU_USER
+ @$(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), \
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-system-$(target))$(ptx/nl))
+endif
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/libexec/qemu-bridge-helper)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/libexec/virtfs-proxy-helper)
+
+ @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios-256k.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios-microvm.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-aarch64-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-arm-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-arm-vars.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-secure-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-vars.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-x86_64-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-x86_64-secure-code.fd)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-e1000.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-e1000e.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-eepro100.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-virtio.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-e1000.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-eepro100.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-virtio.rom)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pvh.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/kvmvapic.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-ati.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-cirrus.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-stdvga.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-virtio.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-vmware.bin)
+ @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios.bin)
+
+ @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu/firmware)
+ @$(call install_glob, qemu, 0, 0, -, /usr/share/qemu/firmware,, *.json)
+
+ @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu/keymaps)
+ @$(call install_copy, qemu, 0, 0, 0755, -, /usr/share/qemu/keymaps/en-us)
+
+ @$(call install_finish, qemu)
+
+ @$(call touch)
+
+# vim: syntax=make
--
2.32.0
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-08-06 7:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-16 12:44 [ptxdist] [PATCH] rules/qemu: Add new package Christian Melki
2021-07-16 13:04 ` Alexander Dahl
2021-08-06 7:00 ` Michael Olbrich
-- strict thread matches above, loose matches on Subject: below --
2021-07-16 10:27 Christian Melki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox