From: Michael Olbrich <m.olbrich@pengutronix.de>
To: Christian Melki <christian.melki@t2data.com>
Cc: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] rules/qemu: Add new package.
Date: Fri, 6 Aug 2021 09:00:20 +0200 [thread overview]
Message-ID: <20210806070020.GN21333@pengutronix.de> (raw)
In-Reply-To: <20210716124423.30570-1-christian.melki@t2data.com>
On Fri, Jul 16, 2021 at 02:44:23PM +0200, Christian Melki wrote:
> Work-in-progress. Add target-qemu package.
> Usecases are among others:
> Higher isolation (security) and target emulation (software longevity).
>
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> ---
> rules/qemu.in | 51 +++++++++
> rules/qemu.make | 274 ++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 325 insertions(+)
> create mode 100644 rules/qemu.in
> create mode 100644 rules/qemu.make
>
> diff --git a/rules/qemu.in b/rules/qemu.in
> new file mode 100644
> index 000000000..d627f7a79
> --- /dev/null
> +++ b/rules/qemu.in
> @@ -0,0 +1,51 @@
> +## SECTION=emulators
> +
> +menuconfig QEMU
> + tristate
> + prompt "qemu "
> + select HOST_MESON
> + select HOST_NINJA
> + select HOST_SYSTEM_PYTHON3
> + select GLIB
> + select LIBCAP_NG
> + select ZLIB
> + select LIBUSB if QEMU_SYS
> + select PIXMAN if QEMU_SYS
> + help
> + QEMU is a generic and open source machine emulator and
> + virtualizer.
Remove trailing whitespaces
> +
> +if QEMU
> +
> +config QEMU_TARGETS
> + string
intent with tab.
> + prompt "QEMU targets"
> + default "i386 x86_64 arm aarch64"
> + help
> + The list of QEMU user and system targets you want to build.
> + Only use the prefixes.
> +
> +config QEMU_FDT
> + bool
> + prompt "Enable Device Tree generation."
> + default y
> + help
> + Say y to let QEMU construct FDTs and pass them
indention
> + to the VMs.
Why make this optional? I don't think the overhead is that big, so maybe
just enable it unconditionally.
> +
> +config QEMU_TOOLS
> + bool
> + prompt "Enable tools"
> + default y
> + help
> + Say y here to include tools.
Hmmm, this is used for configure, but not in the targetinstall stage. That
looks suspicious.
> +
> +config QEMU_SYS
> + bool
> + prompt "system emulation"
> +
> +config QEMU_USR
> + bool
> + prompt "user-space emulation"
> +
> +endif
> diff --git a/rules/qemu.make b/rules/qemu.make
> new file mode 100644
> index 000000000..0a276fbf6
> --- /dev/null
> +++ b/rules/qemu.make
> @@ -0,0 +1,274 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2021 by Christian Melki <christian.melki@t2data.com>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_QEMU) += qemu
> +
> +#
> +# Paths and names
> +#
> +QEMU_VERSION := 6.0.0
> +QEMU_MD5 := cce185dc0119546e395909e8a71a75bb
> +QEMU := qemu-$(QEMU_VERSION)
> +QEMU_SUFFIX := tar.xz
> +QEMU_URL := https://download.qemu.org/$(QEMU).$(QEMU_SUFFIX)
> +QEMU_SOURCE := $(SRCDIR)/$(QEMU).$(QEMU_SUFFIX)
> +QEMU_DIR := $(BUILDDIR)/$(QEMU)
> +QEMU_LICENSE := GPL-2.0-only AND GPL-2.0-or-later AND MIT AND BSD-1-Clause AND BSD-2-Clause AND BSD-3-Clause
> +QEMU_BUILD_OOT := YES
Please remove the corresponding lines in host-qemu.in. It will then default
to this here.
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +ifdef PTXCONF_ARCH_X86
> +QEMU_ARCH := i386
> +ifdef PTXCONF_ARCH_X86_64
> +QEMU_ARCH := x86_64
> +endif
> +endif
> +ifdef PTXCONF_ARCH_ARM
> +QEMU_ARCH := arm
> +endif
> +ifdef PTXCONF_ARCH_ARM64
> +QEMU_ARCH := aarch64
> +endif
Unused?
> +
> +#
> +# autoconf
> +#
> +
> +QEMU_MAKE_OPT := V=$(filter 1,$(PTXDIST_VERBOSE))
> +
> +QEMU_SYS_TARGETS := $(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), $(patsubst %,%-softmmu,$(target)))
> +QEMU_USR_TARGETS := $(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), $(patsubst %,%-linux-user,$(target)))
> +
> +QEMU_PATH := PATH=$(CROSS_PATH)
> +
> +QEMU_CONF_TOOL := autoconf
> +# Note: not realy autoconf:
> +# e.g. there is --enable-debug but not --disable-debug
> +QEMU_CONF_OPT := \
> + --prefix=/usr \
> + --target-list=" \
> + $(call ptx/ifdef, PTXCONF_QEMU_SYS,$(QEMU_SYS_TARGETS),) \
> + $(call ptx/ifdef, PTXCONF_QEMU_USR,$(QEMU_USR_TARGETS),) \
> + " \
> + --meson=meson \
> + --ninja=ninja \
> + --cross-prefix=$(CROSS_COMPILE) \
> + --disable-sanitizers \
> + --disable-tsan \
> + --disable-strip \
> + --disable-werror \
> + --enable-stack-protector \
> + --audio-drv-list= \
> + --block-drv-rw-whitelist= \
> + --block-drv-ro-whitelist= \
> + --enable-trace-backends=nop \
> + --disable-tcg-interpreter \
> + --enable-malloc-trim \
> + --with-coroutine= \
> + --tls-priority=NORMAL \
> + --disable-plugins \
> + --disable-containers \
> + --$(call ptx/endis, PTXCONF_QEMU_SYS)-system \
> + --disable-user \
> + --$(call ptx/endis, PTXCONF_QEMU_USR)-linux-user \
> + --disable-bsd-user \
> + --disable-docs \
> + --disable-guest-agent \
> + --disable-guest-agent-msi \
> + --enable-pie \
> + --disable-modules \
> + --disable-module-upgrades \
> + --disable-debug-tcg \
> + --disable-debug-info \
> + --disable-lto \
> + --disable-sparse \
> + --disable-safe-stack \
> + --disable-cfi \
> + --disable-gnutls \
> + --disable-nettle \
> + --disable-gcrypt \
> + --disable-auth-pam \
> + --disable-sdl \
> + --disable-sdl-image \
> + --disable-gtk \
> + --disable-vte \
> + --disable-curses \
> + --enable-iconv \
> + --disable-vnc \
> + --disable-vnc-sasl \
> + --disable-vnc-jpeg \
> + --disable-vnc-png \
> + --disable-cocoa \
> + --enable-virtfs \
Check with the latest changes of host-qemu. This breaks without
qemu-system.
> + --disable-virtiofsd \
> + --disable-libudev \
> + --disable-mpath \
> + --disable-xen \
> + --disable-xen-pci-passthrough \
> + --disable-brlapi \
> + --disable-curl \
> + --enable-membarrier \
> + --$(call ptx/endis, PTXCONF_QEMU_FDT)-fdt \
> + --enable-kvm \
> + --disable-hax \
> + --disable-hvf \
> + --disable-whpx \
> + --disable-rdma \
> + --disable-pvrdma \
> + --disable-netmap \
> + --disable-linux-aio \
> + --disable-linux-io-uring \
> + --enable-cap-ng \
> + --enable-attr \
> + --enable-vhost-net \
> + --enable-vhost-vsock \
> + --enable-vhost-scsi \
> + --disable-vhost-crypto \
> + --enable-vhost-kernel \
> + --disable-vhost-user \
> + --disable-vhost-user-blk-server \
> + --disable-vhost-vdpa \
> + --disable-spice \
> + --disable-rbd \
> + --disable-libiscsi \
> + --disable-libnfs \
> + --disable-smartcard \
> + --disable-u2f \
> + --$(call ptx/endis, PTXCONF_QEMU_SYS)-libusb \
> + --disable-live-block-migration \
> + --disable-usb-redir \
> + --disable-lzo \
> + --disable-snappy \
> + --disable-bzip2 \
> + --disable-lzfse \
> + --disable-zstd \
> + --disable-seccomp \
> + --enable-coroutine-pool \
> + --disable-glusterfs \
> + --disable-tpm \
> + --disable-libssh \
> + --disable-numa \
> + --disable-libxml2 \
> + --disable-tcmalloc \
> + --disable-jemalloc \
> + --enable-replication \
> + --disable-opengl \
> + --disable-virglrenderer \
> + --disable-xfsctl \
> + --disable-qom-cast-debug \
> + --$(call ptx/endis, PTXCONF_QEMU_TOOLS)-tools \
> + --disable-bochs \
> + --disable-cloop \
> + --disable-dmg \
> + --disable-qcow1 \
> + --disable-vdi \
> + --disable-vvfat \
> + --disable-qed \
> + --disable-parallels \
> + --disable-sheepdog \
> + --disable-crypto-afalg \
> + --disable-capstone \
> + --disable-debug-mutex \
> + --disable-libpmem \
> + --disable-xkbcommon \
> + --disable-rng-none \
> + --disable-libdaxctl \
> + --disable-fuse \
> + --enable-multiprocess \
> + --disable-gio \
> + \
> + --disable-fuzzing \
> + --disable-keyring
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/qemu.install:
> + @$(call targetinfo)
> + @$(call world/install, QEMU)
> +ifdef PTXCONF_QEMU_SYS
> +# # necessary for qemu to find its ROM files
> + @ln -vsf usr/share/qemu $(QEMU_PKGDIR)/pc-bios
> +endif
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/qemu.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, qemu)
> + @$(call install_fixup, qemu,PRIORITY,optional)
> + @$(call install_fixup, qemu,SECTION,base)
> + @$(call install_fixup, qemu,AUTHOR,"Christian Melki <christian.melki@t2data.com>")
> + @$(call install_fixup, qemu,DESCRIPTION,missing)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-edid)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-img)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-io)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-pr-helper)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-storage-daemon)
> +ifdef PTXCONF_QEMU_SYS
> + @$(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), \
QEMU_TARGETS := $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)
somewhere above and use it here
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-system-$(target))$(ptx/nl))
> +endif
> +ifdef PTXCONF_QEMU_USER
> + @$(foreach target, $(call remove_quotes,$(PTXCONF_QEMU_TARGETS)), \
and here.
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/bin/qemu-system-$(target))$(ptx/nl))
> +endif
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/libexec/qemu-bridge-helper)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/libexec/virtfs-proxy-helper)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios-256k.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios-microvm.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/bios.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-aarch64-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-arm-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-arm-vars.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-secure-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-i386-vars.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-x86_64-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/edk2-x86_64-secure-code.fd)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-e1000.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-e1000e.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-eepro100.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/efi-virtio.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-e1000.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-eepro100.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pxe-virtio.rom)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/pvh.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/kvmvapic.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-ati.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-cirrus.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-stdvga.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-virtio.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios-vmware.bin)
> + @$(call install_copy, qemu, 0, 0, 0644, -, /usr/share/qemu/vgabios.bin)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu/firmware)
> + @$(call install_glob, qemu, 0, 0, -, /usr/share/qemu/firmware,, *.json)
> +
> + @$(call install_copy, qemu, 0, 0, 0755, /usr/share/qemu/keymaps)
> + @$(call install_copy, qemu, 0, 0, 0755, -, /usr/share/qemu/keymaps/en-us)
I think this stuff is only used for qemu-system. And a lot of it is
architecture dependent so add some:
ifneq ($(filter i386 x86_64,$(QEMU_TARGETS),)
ifneq ($(filter aarch64,$(QEMU_TARGETS),)
and stuff like that.
Michael
> +
> + @$(call install_finish, qemu)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> --
> 2.32.0
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
next prev parent reply other threads:[~2021-08-06 7:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-16 12:44 Christian Melki
2021-07-16 13:04 ` Alexander Dahl
2021-08-06 7:00 ` Michael Olbrich [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-07-16 10:27 Christian Melki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210806070020.GN21333@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=christian.melki@t2data.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox