From: Michael Olbrich <m.olbrich@pengutronix.de>
To: Ian Abbott <abbotti@mev.co.uk>
Cc: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] exfatprogs: new package
Date: Fri, 17 May 2024 16:04:46 +0200 [thread overview]
Message-ID: <Zkdj_rChNdjOjd_2@pengutronix.de> (raw)
In-Reply-To: <20240517125138.247424-1-abbotti@mev.co.uk>
On Fri, May 17, 2024 at 01:51:38PM +0100, Ian Abbott wrote:
> Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
> ---
> rules/exfatprogs.in | 57 ++++++++++++++++++++++++++++++++
> rules/exfatprogs.make | 76 +++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 133 insertions(+)
> create mode 100644 rules/exfatprogs.in
> create mode 100644 rules/exfatprogs.make
>
> diff --git a/rules/exfatprogs.in b/rules/exfatprogs.in
> new file mode 100644
> index 000000000..07658ff35
> --- /dev/null
> +++ b/rules/exfatprogs.in
> @@ -0,0 +1,57 @@
> +## SECTION=disk_and_file
> +
> +menuconfig EXFATPROGS
> + tristate
> + prompt "exfatprogs "
> + help
> + exFAT (Extensible File Allocation Table) is a filesystem
> + introduced by Microsoft in 2006 commonly used on USB flash
> + drives and SDXC cards. It was proprietary until 2019 when
> + Microsoft published the exFAT specification and released the
> + patent to the Open Invention Network.
> +
> + The exfatprogs package provides the filesystem utilities for
> + use with the exFAT filesystem.
> +
> +if EXFATPROGS
> +
> +config EXFATPROGS_DUMP_EXFAT
> + bool
> + prompt "dump.exfat"
> + help
> + Show on-disk information of an exFAT filesystem.
> +
> +config EXFATPROGS_EXFAT2IMG
> + bool
> + prompt "exfat2img"
> + help
> + Dump metadata of an exFAT filesystem.
> +
> +config EXFATPROGS_EXFATLABEL
> + bool
> + prompt "exfatlabel"
> + help
> + Get or set volume label or volume serial of an exFAT
> + filesystem.
> +
> +config EXFATPROGS_FSCK_EXFAT
> + bool
> + prompt "fsck.exfat"
> + help
> + Check an exFAT filesystem.
> +
> +config EXFATPROGS_MKFS_EXFAT
> + bool
> + prompt "mkfs.exfat"
> + help
> + Create an exFAT filesystem.
> +
> +config EXFATPROGS_TUNE_EXFAT
> + bool
> + prompt "tune.exfat"
> + help
> + Adjust tunable filesystem parameters on an exFAT filesystem.
> +
> +endif
> +
> +# vim: ft=kconfig noet tw=72 ts=8 sw=8
> diff --git a/rules/exfatprogs.make b/rules/exfatprogs.make
> new file mode 100644
> index 000000000..ff0b3209e
> --- /dev/null
> +++ b/rules/exfatprogs.make
> @@ -0,0 +1,76 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2024 by Ian Abbott <abbotti@mev.co.uk>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_EXFATPROGS) += exfatprogs
> +
> +#
> +# Paths and names
> +#
> +EXFATPROGS_VERSION := 1.2.2
> +EXFATPROGS_MD5 := cbe2a6529b4972fc2cc260553f28f983
> +EXFATPROGS := exfatprogs-$(EXFATPROGS_VERSION)
> +EXFATPROGS_SUFFIX := tar.xz
> +EXFATPROGS_URL := https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION)/$(EXFATPROGS).$(EXFATPROGS_SUFFIX)
> +EXFATPROGS_SOURCE := $(SRCDIR)/$(EXFATPROGS).$(EXFATPROGS_SUFFIX)
> +EXFATPROGS_DIR := $(BUILDDIR)/$(EXFATPROGS)
> +EXFATPROGS_LICENSE := GPL-2.0
> +EXFATPROGS_LICENSE_FILES := file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +EXFATPROGS_CONF_ENV := $(CROSS_ENV)
> +
> +#
> +# autoconf
> +#
> +EXFATPROGS_CONF_TOOL := autoconf
> +EXFATPROGS_CONF_OPT := \
> + $(CROSS_AUTOCONF_USR)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/exfatprogs.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, exfatprogs)
> + @$(call install_fixup, exfatprogs,PRIORITY,optional)
> + @$(call install_fixup, exfatprogs,SECTION,base)
> + @$(call install_fixup, exfatprogs,AUTHOR,"Ian Abbott <abbotti@mev.co.uk>")
> + @$(call install_fixup, exfatprogs,DESCRIPTION,missing)
> +
> +ifdef PTXCONF_EXFATPROGS_DUMP_EXFAT
> + @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/dump/dump.exfat, /usr/sbin/dump.exfat)
@$(call install_copy, exfatprogs, 0, 0, 0755, -, /usr/sbin/dump.exfat)
The install stage install the file to $(EXFATPROGS_PKGDIR)/usr/sbin/dump.exfat
and it will be used automatically with the '-' as used above.
Same for all the others below.
Michael
> +endif
> +ifdef PTXCONF_EXFATPROGS_EXFAT2IMG
> + @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/exfat2img/exfat2img, /usr/sbin/exfat2img)
> +endif
> +ifdef PTXCONF_EXFATPROGS_EXFATLABEL
> + @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/label/exfatlabel, /usr/sbin/exfatlabel)
> +endif
> +ifdef PTXCONF_EXFATPROGS_FSCK_EXFAT
> + @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/fsck/fsck.exfat, /usr/sbin/fsck.exfat)
> +endif
> +ifdef PTXCONF_EXFATPROGS_MKFS_EXFAT
> + @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/mkfs/mkfs.exfat, /usr/sbin/mkfs.exfat)
> +endif
> +ifdef PTXCONF_EXFATPROGS_TUNE_EXFAT
> + @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/tune/tune.exfat, /usr/sbin/tune.exfat)
> +endif
> +
> + @$(call install_finish, exfatprogs)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> --
> 2.43.0
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2024-05-17 14:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-17 12:51 Ian Abbott
2024-05-17 14:04 ` Michael Olbrich [this message]
2024-05-17 16:25 ` [ptxdist] [PATCH v2] " Ian Abbott
2024-05-21 9:59 ` [ptxdist] [APPLIED] " Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zkdj_rChNdjOjd_2@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=abbotti@mev.co.uk \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox