From: Ian Abbott <abbotti@mev.co.uk>
To: ptxdist@pengutronix.de
Cc: Ian Abbott <abbotti@mev.co.uk>
Subject: [ptxdist] [PATCH] exfatprogs: new package
Date: Fri, 17 May 2024 13:51:38 +0100 [thread overview]
Message-ID: <20240517125138.247424-1-abbotti@mev.co.uk> (raw)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
rules/exfatprogs.in | 57 ++++++++++++++++++++++++++++++++
rules/exfatprogs.make | 76 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 133 insertions(+)
create mode 100644 rules/exfatprogs.in
create mode 100644 rules/exfatprogs.make
diff --git a/rules/exfatprogs.in b/rules/exfatprogs.in
new file mode 100644
index 000000000..07658ff35
--- /dev/null
+++ b/rules/exfatprogs.in
@@ -0,0 +1,57 @@
+## SECTION=disk_and_file
+
+menuconfig EXFATPROGS
+ tristate
+ prompt "exfatprogs "
+ help
+ exFAT (Extensible File Allocation Table) is a filesystem
+ introduced by Microsoft in 2006 commonly used on USB flash
+ drives and SDXC cards. It was proprietary until 2019 when
+ Microsoft published the exFAT specification and released the
+ patent to the Open Invention Network.
+
+ The exfatprogs package provides the filesystem utilities for
+ use with the exFAT filesystem.
+
+if EXFATPROGS
+
+config EXFATPROGS_DUMP_EXFAT
+ bool
+ prompt "dump.exfat"
+ help
+ Show on-disk information of an exFAT filesystem.
+
+config EXFATPROGS_EXFAT2IMG
+ bool
+ prompt "exfat2img"
+ help
+ Dump metadata of an exFAT filesystem.
+
+config EXFATPROGS_EXFATLABEL
+ bool
+ prompt "exfatlabel"
+ help
+ Get or set volume label or volume serial of an exFAT
+ filesystem.
+
+config EXFATPROGS_FSCK_EXFAT
+ bool
+ prompt "fsck.exfat"
+ help
+ Check an exFAT filesystem.
+
+config EXFATPROGS_MKFS_EXFAT
+ bool
+ prompt "mkfs.exfat"
+ help
+ Create an exFAT filesystem.
+
+config EXFATPROGS_TUNE_EXFAT
+ bool
+ prompt "tune.exfat"
+ help
+ Adjust tunable filesystem parameters on an exFAT filesystem.
+
+endif
+
+# vim: ft=kconfig noet tw=72 ts=8 sw=8
diff --git a/rules/exfatprogs.make b/rules/exfatprogs.make
new file mode 100644
index 000000000..ff0b3209e
--- /dev/null
+++ b/rules/exfatprogs.make
@@ -0,0 +1,76 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2024 by Ian Abbott <abbotti@mev.co.uk>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_EXFATPROGS) += exfatprogs
+
+#
+# Paths and names
+#
+EXFATPROGS_VERSION := 1.2.2
+EXFATPROGS_MD5 := cbe2a6529b4972fc2cc260553f28f983
+EXFATPROGS := exfatprogs-$(EXFATPROGS_VERSION)
+EXFATPROGS_SUFFIX := tar.xz
+EXFATPROGS_URL := https://github.com/exfatprogs/exfatprogs/releases/download/$(EXFATPROGS_VERSION)/$(EXFATPROGS).$(EXFATPROGS_SUFFIX)
+EXFATPROGS_SOURCE := $(SRCDIR)/$(EXFATPROGS).$(EXFATPROGS_SUFFIX)
+EXFATPROGS_DIR := $(BUILDDIR)/$(EXFATPROGS)
+EXFATPROGS_LICENSE := GPL-2.0
+EXFATPROGS_LICENSE_FILES := file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+EXFATPROGS_CONF_ENV := $(CROSS_ENV)
+
+#
+# autoconf
+#
+EXFATPROGS_CONF_TOOL := autoconf
+EXFATPROGS_CONF_OPT := \
+ $(CROSS_AUTOCONF_USR)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/exfatprogs.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, exfatprogs)
+ @$(call install_fixup, exfatprogs,PRIORITY,optional)
+ @$(call install_fixup, exfatprogs,SECTION,base)
+ @$(call install_fixup, exfatprogs,AUTHOR,"Ian Abbott <abbotti@mev.co.uk>")
+ @$(call install_fixup, exfatprogs,DESCRIPTION,missing)
+
+ifdef PTXCONF_EXFATPROGS_DUMP_EXFAT
+ @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/dump/dump.exfat, /usr/sbin/dump.exfat)
+endif
+ifdef PTXCONF_EXFATPROGS_EXFAT2IMG
+ @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/exfat2img/exfat2img, /usr/sbin/exfat2img)
+endif
+ifdef PTXCONF_EXFATPROGS_EXFATLABEL
+ @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/label/exfatlabel, /usr/sbin/exfatlabel)
+endif
+ifdef PTXCONF_EXFATPROGS_FSCK_EXFAT
+ @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/fsck/fsck.exfat, /usr/sbin/fsck.exfat)
+endif
+ifdef PTXCONF_EXFATPROGS_MKFS_EXFAT
+ @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/mkfs/mkfs.exfat, /usr/sbin/mkfs.exfat)
+endif
+ifdef PTXCONF_EXFATPROGS_TUNE_EXFAT
+ @$(call install_copy, exfatprogs, 0, 0, 0755, $(EXFATPROGS_DIR)/tune/tune.exfat, /usr/sbin/tune.exfat)
+endif
+
+ @$(call install_finish, exfatprogs)
+
+ @$(call touch)
+
+# vim: syntax=make
--
2.43.0
next reply other threads:[~2024-05-17 12:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-17 12:51 Ian Abbott [this message]
2024-05-17 14:04 ` Michael Olbrich
2024-05-17 16:25 ` [ptxdist] [PATCH v2] " Ian Abbott
2024-05-21 9:59 ` [ptxdist] [APPLIED] " Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240517125138.247424-1-abbotti@mev.co.uk \
--to=abbotti@mev.co.uk \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox