From: Michael Olbrich <mol@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: Alexander Dahl <post@lespocky.de>
Subject: Re: [ptxdist] [APPLIED] libcoap2: new package
Date: Sun, 14 Mar 2021 14:35:39 +0100 [thread overview]
Message-ID: <E1lLQuB-007JO7-1t@dude03.red.stw.pengutronix.de> (raw)
In-Reply-To: <20210308131845.12024-1-post@lespocky.de>
Thanks, applied as 8eaf58901d1329b8939910f18db0bed29a06ef42.
Michael
[sent from post-receive hook]
On Sun, 14 Mar 2021 14:35:39 +0100, Alexander Dahl <post@lespocky.de> wrote:
> This package comes with a new API for libcoap, with different .so
> version and separate header files, and can coexist with the old libcoap
> package.
>
> Signed-off-by: Alexander Dahl <ada@thorsis.com>
> Message-Id: <20210308131845.12024-1-post@lespocky.de>
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
>
> diff --git a/patches/libcoap2-4.2.1/autogen.sh b/patches/libcoap2-4.2.1/autogen.sh
> new file mode 120000
> index 000000000000..9f8a4cb7ddcb
> --- /dev/null
> +++ b/patches/libcoap2-4.2.1/autogen.sh
> @@ -0,0 +1 @@
> +../autogen.sh
> \ No newline at end of file
> diff --git a/rules/libcoap2.in b/rules/libcoap2.in
> new file mode 100644
> index 000000000000..d47928a06034
> --- /dev/null
> +++ b/rules/libcoap2.in
> @@ -0,0 +1,16 @@
> +## SECTION=networking
> +
> +config LIBCOAP2
> + tristate
> + prompt "libcoap2"
> + help
> + libcoap implements a lightweight application-protocol for
> + devices that are constrained their resources such as computing
> + power, RF range, memory, bandwith, or network packet sizes.
> +
> + The Constrained Application Protocol (CoAP) was standardized
> + in the Internet Engineering Task Force (IETF) as RFC 7252.
> +
> + https://libcoap.net/
> +
> +# vim: ft=kconfig noet tw=72 ts=8 sw=8
> diff --git a/rules/libcoap2.make b/rules/libcoap2.make
> new file mode 100644
> index 000000000000..4fac1220588e
> --- /dev/null
> +++ b/rules/libcoap2.make
> @@ -0,0 +1,74 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2021 by Alexander Dahl <ada@thorsis.com>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_LIBCOAP2) += libcoap2
> +
> +#
> +# Paths and names
> +#
> +LIBCOAP2_VERSION := 4.2.1
> +LIBCOAP2_MD5 := ddd35fed3b44e20d6d456c9901334dae
> +LIBCOAP2 := libcoap2-$(LIBCOAP2_VERSION)
> +LIBCOAP2_SUFFIX := tar.gz
> +LIBCOAP2_URL := https://github.com/obgm/libcoap/archive/v$(LIBCOAP2_VERSION).$(LIBCOAP2_SUFFIX)
> +LIBCOAP2_SOURCE := $(SRCDIR)/$(LIBCOAP2).$(LIBCOAP2_SUFFIX)
> +LIBCOAP2_DIR := $(BUILDDIR)/$(LIBCOAP2)
> +LIBCOAP2_LICENSE := BSD-2-Clause AND BSD-1-Clause
> +LIBCOAP2_LICENSE_FILES := \
> + file://COPYING;md5=faed8f005d476edd3f250599a4bb9a75 \
> + file://LICENSE;md5=4cba1bd050d08b2154b5c29de3a0e9c2 \
> + file://include/coap2/uthash.h;startline=2;endline=21;md5=cd2b3441e2540a602f09fa4f0438d82b \
> + file://include/coap2/utlist.h;startline=2;endline=21;md5=b9b2b4f775f0f5b7901f008940efe5cf
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +#
> +# autoconf
> +#
> +LIBCOAP2_CONF_TOOL := autoconf
> +LIBCOAP2_CONF_OPT := \
> + $(CROSS_AUTOCONF_USR) \
> + --disable-assert \
> + --disable-documentation \
> + --disable-doxygen \
> + --disable-manpages \
> + --disable-dtls \
> + --disable-tests \
> + --disable-examples \
> + --disable-gcov \
> + --disable-small-stack \
> + --without-gnutls \
> + --without-openssl \
> + --without-tinydtls \
> + --with-epoll
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/libcoap2.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, libcoap2)
> + @$(call install_fixup, libcoap2,PRIORITY,optional)
> + @$(call install_fixup, libcoap2,SECTION,base)
> + @$(call install_fixup, libcoap2,AUTHOR,"Alexander Dahl <ada@thorsis.com>")
> + @$(call install_fixup, libcoap2,DESCRIPTION,missing)
> +
> + @$(call install_lib, libcoap2, 0, 0, 0644, libcoap-2)
> +
> + @$(call install_finish, libcoap2)
> +
> + @$(call touch)
> +
> +# vim: ft=make noet tw=72 ts=8 sw=8
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
prev parent reply other threads:[~2021-03-14 13:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-08 13:18 [ptxdist] [PATCH] " Alexander Dahl
2021-03-14 13:35 ` Michael Olbrich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1lLQuB-007JO7-1t@dude03.red.stw.pengutronix.de \
--to=mol@pengutronix.de \
--cc=post@lespocky.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox