[ptxdist] [PATCH] libcoap2: new package

[Alexander Dahl <post@lespocky.de>]

From: Alexander Dahl <ada@thorsis.com>

This package comes with a new API for libcoap, with different .so
version and separate header files, and can coexist with the old libcoap
package.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
---
Cc: Alexander Aring <alex.aring@gmail.com>

Notes:
    
    There are no packages depending on the old libcoap package in mainline
    ptxdist, so we might as well update that.  Debian has two different
    packages, too.  That's why I was somewhat unsure what would be best
    here, updating or putting a new package side by side?  I need the
    package with the new API, so I could also just update the old package
    with this newer stuff, if that's what folks want.  Please let me know!

 patches/libcoap2-4.2.1/autogen.sh |  1 +
 rules/libcoap2.in                 | 16 +++++++++
 rules/libcoap2.make               | 74 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 91 insertions(+)
 create mode 120000 patches/libcoap2-4.2.1/autogen.sh
 create mode 100644 rules/libcoap2.in
 create mode 100644 rules/libcoap2.make

diff --git a/patches/libcoap2-4.2.1/autogen.sh b/patches/libcoap2-4.2.1/autogen.sh
new file mode 120000
index 000000000..9f8a4cb7d
--- /dev/null
+++ b/patches/libcoap2-4.2.1/autogen.sh
@@ -0,0 +1 @@
+../autogen.sh
\ No newline at end of file
diff --git a/rules/libcoap2.in b/rules/libcoap2.in
new file mode 100644
index 000000000..d47928a06
--- /dev/null
+++ b/rules/libcoap2.in
@@ -0,0 +1,16 @@
+## SECTION=networking
+
+config LIBCOAP2
+	tristate
+	prompt "libcoap2"
+	help
+	  libcoap implements a lightweight application-protocol for
+	  devices that are constrained their resources such as computing
+	  power, RF range, memory, bandwith, or network packet sizes.
+
+	  The Constrained Application Protocol (CoAP) was standardized
+	  in the Internet Engineering Task Force (IETF) as RFC 7252.
+
+	  https://libcoap.net/
+
+# vim: ft=kconfig noet tw=72 ts=8 sw=8
diff --git a/rules/libcoap2.make b/rules/libcoap2.make
new file mode 100644
index 000000000..4fac12205
--- /dev/null
+++ b/rules/libcoap2.make
@@ -0,0 +1,74 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2021 by Alexander Dahl <ada@thorsis.com>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_LIBCOAP2) += libcoap2
+
+#
+# Paths and names
+#
+LIBCOAP2_VERSION	:= 4.2.1
+LIBCOAP2_MD5		:= ddd35fed3b44e20d6d456c9901334dae
+LIBCOAP2		:= libcoap2-$(LIBCOAP2_VERSION)
+LIBCOAP2_SUFFIX		:= tar.gz
+LIBCOAP2_URL		:= https://github.com/obgm/libcoap/archive/v$(LIBCOAP2_VERSION).$(LIBCOAP2_SUFFIX)
+LIBCOAP2_SOURCE		:= $(SRCDIR)/$(LIBCOAP2).$(LIBCOAP2_SUFFIX)
+LIBCOAP2_DIR		:= $(BUILDDIR)/$(LIBCOAP2)
+LIBCOAP2_LICENSE	:= BSD-2-Clause AND BSD-1-Clause
+LIBCOAP2_LICENSE_FILES	:= \
+	file://COPYING;md5=faed8f005d476edd3f250599a4bb9a75 \
+	file://LICENSE;md5=4cba1bd050d08b2154b5c29de3a0e9c2 \
+	file://include/coap2/uthash.h;startline=2;endline=21;md5=cd2b3441e2540a602f09fa4f0438d82b \
+	file://include/coap2/utlist.h;startline=2;endline=21;md5=b9b2b4f775f0f5b7901f008940efe5cf
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#
+# autoconf
+#
+LIBCOAP2_CONF_TOOL	:= autoconf
+LIBCOAP2_CONF_OPT	:=  \
+	$(CROSS_AUTOCONF_USR) \
+	--disable-assert \
+	--disable-documentation \
+	--disable-doxygen \
+	--disable-manpages \
+	--disable-dtls \
+	--disable-tests \
+	--disable-examples \
+	--disable-gcov \
+	--disable-small-stack \
+	--without-gnutls \
+	--without-openssl \
+	--without-tinydtls \
+	--with-epoll
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/libcoap2.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, libcoap2)
+	@$(call install_fixup, libcoap2,PRIORITY,optional)
+	@$(call install_fixup, libcoap2,SECTION,base)
+	@$(call install_fixup, libcoap2,AUTHOR,"Alexander Dahl <ada@thorsis.com>")
+	@$(call install_fixup, libcoap2,DESCRIPTION,missing)
+
+	@$(call install_lib, libcoap2, 0, 0, 0644, libcoap-2)
+
+	@$(call install_finish, libcoap2)
+
+	@$(call touch)
+
+# vim: ft=make noet tw=72 ts=8 sw=8
-- 
2.11.0


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de