From: Christian Melki <christian.melki@t2data.com>
To: Michael Olbrich <m.olbrich@pengutronix.de>
Cc: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] sdl2-ttf: Version bump + rework. 2.20.1 -> 2.20.2.
Date: Fri, 10 Feb 2023 12:23:39 +0100 [thread overview]
Message-ID: <2a45bc27-ac83-ae36-b78e-ffc76e44c9f7@t2data.com> (raw)
In-Reply-To: <Y+YnuLHmsLGE+DP5@pengutronix.de>
On 2/10/23 12:17 PM, Michael Olbrich wrote:
> On Wed, Feb 08, 2023 at 10:42:50AM +0100, Christian Melki wrote:
>> Very minor bugfix release.
>> https://github.com/libsdl-org/SDL_ttf/releases/tag/release-2.20.2
>> Also do some fixes. As the configuration was very non-complete.
>> This should help reduce footprint if needed.
>> Ptxdist had freetype dependencies, although sdl2-ttf was using
>> the internal library.
>>
>> * License file copyright year changed.
>> * Move patchset forward, applies cleanly.
>> * Add option to control if the mandatory freetype library should
>> be external (otherwise it must use the internal one).
>> * Add option to enable optional harfbuzz.
>> * Add option to enable internal harfbuzz if support is enabled.
>> * Make the options default reflect the old behavior.
>> Ie, internal freetype and harfbuzz as default.
>> * Disable the freetypetest tool.
>>
>> Signed-off-by: Christian Melki <christian.melki@t2data.com>
>> ---
>> ...igure-make-opengl-support-switchable.patch | 0
>> .../autogen.sh | 0
>> .../series | 0
>> rules/sdl2-ttf.in | 46 +++++++++++++++++--
>> rules/sdl2-ttf.make | 10 ++--
>> 5 files changed, 50 insertions(+), 6 deletions(-)
>> rename patches/{SDL2_ttf-2.20.1 => SDL2_ttf-2.20.2}/0001-configure-make-opengl-support-switchable.patch (100%)
>> rename patches/{SDL2_ttf-2.20.1 => SDL2_ttf-2.20.2}/autogen.sh (100%)
>> rename patches/{SDL2_ttf-2.20.1 => SDL2_ttf-2.20.2}/series (100%)
>>
>> diff --git a/patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch b/patches/SDL2_ttf-2.20.2/0001-configure-make-opengl-support-switchable.patch
>> similarity index 100%
>> rename from patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch
>> rename to patches/SDL2_ttf-2.20.2/0001-configure-make-opengl-support-switchable.patch
>> diff --git a/patches/SDL2_ttf-2.20.1/autogen.sh b/patches/SDL2_ttf-2.20.2/autogen.sh
>> similarity index 100%
>> rename from patches/SDL2_ttf-2.20.1/autogen.sh
>> rename to patches/SDL2_ttf-2.20.2/autogen.sh
>> diff --git a/patches/SDL2_ttf-2.20.1/series b/patches/SDL2_ttf-2.20.2/series
>> similarity index 100%
>> rename from patches/SDL2_ttf-2.20.1/series
>> rename to patches/SDL2_ttf-2.20.2/series
>> diff --git a/rules/sdl2-ttf.in b/rules/sdl2-ttf.in
>> index a14676933..fb68fd5a0 100644
>> --- a/rules/sdl2-ttf.in
>> +++ b/rules/sdl2-ttf.in
>> @@ -1,12 +1,52 @@
>> ## SECTION=multimedia_sdl
>>
>> -config SDL2_TTF
>> +menuconfig SDL2_TTF
>> tristate
>> select SDL2
>> - select FREETYPE
>> - prompt "SDL2 ttf"
>> + select FREETYPE if SDL2_TTF_EXTERNAL_FREETYPE
>> + select HARFBUZZ if SDL2_TTF_EXTERNAL_HARFBUZZ
>> + prompt "SDL2 ttf "
>> help
>> This is a sample library which allows you to use TrueType
>> fonts in your SDL applications. It comes with an example
>> program "showfont" which displays an example string for a
>> given TrueType font file.
>> +
>> +if SDL2_TTF
>> +
>> +config SDL2_TTF_EXTERNAL_FREETYPE
>> + bool
>> + prompt "enable external freetype support"
>> + help
>> + Freetype is mandatory for SDL2-ttf.
>> + And it has a version of freetype built in.
>> + To reduce code footprint, there is an option
>> + to use an external freetype library.
>> + Probably not as well tested against different
>> + versions of freetype as the internal one.
>> +
>> +config SDL2_TTF_HARFBUZZ
>> + bool
>> + prompt "enable harfbuzz support"
>> + default y
>> + help
>> + Harfbuzz is optional for SDL2-ttf.
>> + However, it has a version of harfbuzz built in.
>> + To reduce code footprint, there is an option
>> + to disable harfbuzz altogheter.
>> +
>> +if SDL2_TTF_HARFBUZZ
>> +
>> +config SDL2_TTF_EXTERNAL_HARFBUZZ
>> + bool
>> + prompt "enable external harfbuzz support"
>> + help
>> + Use this option to build with an external
>> + harfbuzz library.
>> + Much like the external freetype option,
>> + this can be used to reduce footprint by
>> + deduplicating library use.
>
> Hmmm, I would prefer to always us the system libraries or none at all, or
> are there good reasons to use the built-in versions?
>
> Michael
>
Guess none, beside compatibility? Relying on old broken behavior etc?
I've built it with the options set for external though. Seems ok.
Maybe the harfbuzz/freetype circular dependency made the project carry it's own implementation?
And I agree, but refrained from changing the default behavior.
The duplication bugged be a bit when I stumbled upon it though.
Christian
>> +
>> +endif
>> +
>> +endif
>> diff --git a/rules/sdl2-ttf.make b/rules/sdl2-ttf.make
>> index beaad3992..724e26ed6 100644
>> --- a/rules/sdl2-ttf.make
>> +++ b/rules/sdl2-ttf.make
>> @@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_SDL2_TTF) += sdl2-ttf
>> #
>> # Paths and names
>> #
>> -SDL2_TTF_VERSION := 2.20.1
>> -SDL2_TTF_MD5 := 746be429bdfb5892066dcfaf593e1644
>> +SDL2_TTF_VERSION := 2.20.2
>> +SDL2_TTF_MD5 := 4815838c87410346226983f4e0a85fd4
>> SDL2_TTF := SDL2_ttf-$(SDL2_TTF_VERSION)
>> SDL2_TTF_SUFFIX := tar.gz
>> SDL2_TTF_URL := https://www.libsdl.org/projects/SDL_ttf/release/$(SDL2_TTF).$(SDL2_TTF_SUFFIX)
>> @@ -23,7 +23,7 @@ SDL2_TTF_SOURCE := $(SRCDIR)/$(SDL2_TTF).$(SDL2_TTF_SUFFIX)
>> SDL2_TTF_DIR := $(BUILDDIR)/$(SDL2_TTF)
>> SDL2_TTF_LICENSE := zlib
>> SDL2_TTF_LICENSE_FILES := \
>> - file://LICENSE.txt;md5=771dca8728b18d39b130e19b36514371
>> + file://LICENSE.txt;md5=a41cbf59bdea749fe34c1af6d3615f68
>>
>> # ----------------------------------------------------------------------------
>> # Prepare
>> @@ -33,6 +33,10 @@ SDL2_TTF_CONF_TOOL := autoconf
>> SDL2_TTF_CONF_OPT := \
>> $(CROSS_AUTOCONF_USR) \
>> $(GLOBAL_LARGE_FILE_OPTION) \
>> + --$(call ptx/disen,PTXCONF_SDL2_TTF_EXTERNAL_FREETYPE)-freetype-builtin \
>> + --disable-freetypetest \
>> + --$(call ptx/endis,PTXCONF_SDL2_TTF_HARFBUZZ)-harfbuzz \
>> + --$(call ptx/disen,PTXCONF_SDL2_TTF_EXTERNAL_HARFBUZZ)-harfbuzz-builtin \
>> --disable-sdltest
>>
>> ifdef PTXCONF_SDL2_PULSEAUDIO
>> --
>> 2.34.1
>>
>>
>>
>
next prev parent reply other threads:[~2023-02-10 11:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-08 9:42 Christian Melki
2023-02-10 11:17 ` Michael Olbrich
2023-02-10 11:23 ` Christian Melki [this message]
2023-02-10 11:27 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2a45bc27-ac83-ae36-b78e-ffc76e44c9f7@t2data.com \
--to=christian.melki@t2data.com \
--cc=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox