From: Michael Olbrich <m.olbrich@pengutronix.de>
To: Christian Melki <christian.melki@t2data.com>
Cc: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] sdl2-ttf: Version bump + rework. 2.20.1 -> 2.20.2.
Date: Fri, 10 Feb 2023 12:27:46 +0100 [thread overview]
Message-ID: <20230210112746.GC30852@pengutronix.de> (raw)
In-Reply-To: <2a45bc27-ac83-ae36-b78e-ffc76e44c9f7@t2data.com>
On Fri, Feb 10, 2023 at 12:23:39PM +0100, Christian Melki wrote:
> On 2/10/23 12:17 PM, Michael Olbrich wrote:
> > On Wed, Feb 08, 2023 at 10:42:50AM +0100, Christian Melki wrote:
> > > Very minor bugfix release.
> > > https://github.com/libsdl-org/SDL_ttf/releases/tag/release-2.20.2
> > > Also do some fixes. As the configuration was very non-complete.
> > > This should help reduce footprint if needed.
> > > Ptxdist had freetype dependencies, although sdl2-ttf was using
> > > the internal library.
> > >
> > > * License file copyright year changed.
> > > * Move patchset forward, applies cleanly.
> > > * Add option to control if the mandatory freetype library should
> > > be external (otherwise it must use the internal one).
> > > * Add option to enable optional harfbuzz.
> > > * Add option to enable internal harfbuzz if support is enabled.
> > > * Make the options default reflect the old behavior.
> > > Ie, internal freetype and harfbuzz as default.
> > > * Disable the freetypetest tool.
> > >
> > > Signed-off-by: Christian Melki <christian.melki@t2data.com>
> > > ---
> > > ...igure-make-opengl-support-switchable.patch | 0
> > > .../autogen.sh | 0
> > > .../series | 0
> > > rules/sdl2-ttf.in | 46 +++++++++++++++++--
> > > rules/sdl2-ttf.make | 10 ++--
> > > 5 files changed, 50 insertions(+), 6 deletions(-)
> > > rename patches/{SDL2_ttf-2.20.1 => SDL2_ttf-2.20.2}/0001-configure-make-opengl-support-switchable.patch (100%)
> > > rename patches/{SDL2_ttf-2.20.1 => SDL2_ttf-2.20.2}/autogen.sh (100%)
> > > rename patches/{SDL2_ttf-2.20.1 => SDL2_ttf-2.20.2}/series (100%)
> > >
> > > diff --git a/patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch b/patches/SDL2_ttf-2.20.2/0001-configure-make-opengl-support-switchable.patch
> > > similarity index 100%
> > > rename from patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch
> > > rename to patches/SDL2_ttf-2.20.2/0001-configure-make-opengl-support-switchable.patch
> > > diff --git a/patches/SDL2_ttf-2.20.1/autogen.sh b/patches/SDL2_ttf-2.20.2/autogen.sh
> > > similarity index 100%
> > > rename from patches/SDL2_ttf-2.20.1/autogen.sh
> > > rename to patches/SDL2_ttf-2.20.2/autogen.sh
> > > diff --git a/patches/SDL2_ttf-2.20.1/series b/patches/SDL2_ttf-2.20.2/series
> > > similarity index 100%
> > > rename from patches/SDL2_ttf-2.20.1/series
> > > rename to patches/SDL2_ttf-2.20.2/series
> > > diff --git a/rules/sdl2-ttf.in b/rules/sdl2-ttf.in
> > > index a14676933..fb68fd5a0 100644
> > > --- a/rules/sdl2-ttf.in
> > > +++ b/rules/sdl2-ttf.in
> > > @@ -1,12 +1,52 @@
> > > ## SECTION=multimedia_sdl
> > > -config SDL2_TTF
> > > +menuconfig SDL2_TTF
> > > tristate
> > > select SDL2
> > > - select FREETYPE
> > > - prompt "SDL2 ttf"
> > > + select FREETYPE if SDL2_TTF_EXTERNAL_FREETYPE
> > > + select HARFBUZZ if SDL2_TTF_EXTERNAL_HARFBUZZ
> > > + prompt "SDL2 ttf "
> > > help
> > > This is a sample library which allows you to use TrueType
> > > fonts in your SDL applications. It comes with an example
> > > program "showfont" which displays an example string for a
> > > given TrueType font file.
> > > +
> > > +if SDL2_TTF
> > > +
> > > +config SDL2_TTF_EXTERNAL_FREETYPE
> > > + bool
> > > + prompt "enable external freetype support"
> > > + help
> > > + Freetype is mandatory for SDL2-ttf.
> > > + And it has a version of freetype built in.
> > > + To reduce code footprint, there is an option
> > > + to use an external freetype library.
> > > + Probably not as well tested against different
> > > + versions of freetype as the internal one.
> > > +
> > > +config SDL2_TTF_HARFBUZZ
> > > + bool
> > > + prompt "enable harfbuzz support"
> > > + default y
> > > + help
> > > + Harfbuzz is optional for SDL2-ttf.
> > > + However, it has a version of harfbuzz built in.
> > > + To reduce code footprint, there is an option
> > > + to disable harfbuzz altogheter.
> > > +
> > > +if SDL2_TTF_HARFBUZZ
> > > +
> > > +config SDL2_TTF_EXTERNAL_HARFBUZZ
> > > + bool
> > > + prompt "enable external harfbuzz support"
> > > + help
> > > + Use this option to build with an external
> > > + harfbuzz library.
> > > + Much like the external freetype option,
> > > + this can be used to reduce footprint by
> > > + deduplicating library use.
> >
> > Hmmm, I would prefer to always us the system libraries or none at all, or
> > are there good reasons to use the built-in versions?
> >
> > Michael
> >
>
> Guess none, beside compatibility? Relying on old broken behavior etc?
> I've built it with the options set for external though. Seems ok.
> Maybe the harfbuzz/freetype circular dependency made the project carry it's own implementation?
>
> And I agree, but refrained from changing the default behavior.
> The duplication bugged be a bit when I stumbled upon it though.
I'm pretty sure, the old behaviour was just accidental. So always use the
system libraries please, with just one option to make harfbuzz optional.
Michael
> > > +
> > > +endif
> > > +
> > > +endif
> > > diff --git a/rules/sdl2-ttf.make b/rules/sdl2-ttf.make
> > > index beaad3992..724e26ed6 100644
> > > --- a/rules/sdl2-ttf.make
> > > +++ b/rules/sdl2-ttf.make
> > > @@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_SDL2_TTF) += sdl2-ttf
> > > #
> > > # Paths and names
> > > #
> > > -SDL2_TTF_VERSION := 2.20.1
> > > -SDL2_TTF_MD5 := 746be429bdfb5892066dcfaf593e1644
> > > +SDL2_TTF_VERSION := 2.20.2
> > > +SDL2_TTF_MD5 := 4815838c87410346226983f4e0a85fd4
> > > SDL2_TTF := SDL2_ttf-$(SDL2_TTF_VERSION)
> > > SDL2_TTF_SUFFIX := tar.gz
> > > SDL2_TTF_URL := https://www.libsdl.org/projects/SDL_ttf/release/$(SDL2_TTF).$(SDL2_TTF_SUFFIX)
> > > @@ -23,7 +23,7 @@ SDL2_TTF_SOURCE := $(SRCDIR)/$(SDL2_TTF).$(SDL2_TTF_SUFFIX)
> > > SDL2_TTF_DIR := $(BUILDDIR)/$(SDL2_TTF)
> > > SDL2_TTF_LICENSE := zlib
> > > SDL2_TTF_LICENSE_FILES := \
> > > - file://LICENSE.txt;md5=771dca8728b18d39b130e19b36514371
> > > + file://LICENSE.txt;md5=a41cbf59bdea749fe34c1af6d3615f68
> > > # ----------------------------------------------------------------------------
> > > # Prepare
> > > @@ -33,6 +33,10 @@ SDL2_TTF_CONF_TOOL := autoconf
> > > SDL2_TTF_CONF_OPT := \
> > > $(CROSS_AUTOCONF_USR) \
> > > $(GLOBAL_LARGE_FILE_OPTION) \
> > > + --$(call ptx/disen,PTXCONF_SDL2_TTF_EXTERNAL_FREETYPE)-freetype-builtin \
> > > + --disable-freetypetest \
> > > + --$(call ptx/endis,PTXCONF_SDL2_TTF_HARFBUZZ)-harfbuzz \
> > > + --$(call ptx/disen,PTXCONF_SDL2_TTF_EXTERNAL_HARFBUZZ)-harfbuzz-builtin \
> > > --disable-sdltest
> > > ifdef PTXCONF_SDL2_PULSEAUDIO
> > > --
> > > 2.34.1
> > >
> > >
> > >
> >
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2023-02-10 11:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-08 9:42 Christian Melki
2023-02-10 11:17 ` Michael Olbrich
2023-02-10 11:23 ` Christian Melki
2023-02-10 11:27 ` Michael Olbrich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230210112746.GC30852@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=christian.melki@t2data.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox