mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
* [ptxdist] [PATCH] busybox: Version bump. 1.36.1 -> 1.37.0
@ 2024-09-30 20:01 Christian Melki
  2024-10-11 10:24 ` [ptxdist] [APPLIED] " Michael Olbrich
  0 siblings, 1 reply; 2+ messages in thread
From: Christian Melki @ 2024-09-30 20:01 UTC (permalink / raw)
  To: ptxdist

A long time in the making. Nothing super scary or exiting though.
Mostly fixes. One new applet, "getfattr". No pun intended.
https://git.busybox.net/busybox/log/?h=1_37_stable

Plugs CVEs:
CVE-2023-42366 - A heap-buffer-overflow in the next_token function at awk.c.
CVE-2023-42365 - A use-after-free via a crafted awk pattern in the awk.c copyvar function
CVE-2023-42364 - A use-after-free denial of service via a crafted awk pattern in awk.c evaluate function.
CVE-2023-42363 - A use-after-free in xasprintf function.

* Migrate new configuration. Minor changes.

* Forward patches. Applies cleanly.

Signed-off-by: Christian Melki <christian.melki@t2data.com>
---
 config/busybox/Config.in                      |  11 ++
 config/busybox/archival/Config.in             |  12 +-
 config/busybox/console-tools/Config.in        |  30 +--
 config/busybox/coreutils/Config.in            | 187 +++++++++---------
 config/busybox/debianutils/Config.in          |   6 +-
 config/busybox/e2fsprogs/Config.in            |   6 +-
 config/busybox/editors/Config.in              |  10 +-
 config/busybox/findutils/Config.in            |  17 +-
 config/busybox/init/Config.in                 |   6 +-
 config/busybox/klibc-utils/Config.in          |   4 +-
 config/busybox/loginutils/Config.in           |  26 +--
 config/busybox/mailutils/Config.in            |   6 +-
 config/busybox/miscutils/Config.in            |  89 +++++----
 config/busybox/modutils/Config.in             |   6 +-
 config/busybox/networking/Config.in           |  64 +++---
 config/busybox/networking/udhcp/Config.in     |  11 +-
 config/busybox/printutils/Config.in           |   6 +-
 config/busybox/procps/Config.in               |  42 ++--
 config/busybox/runit/Config.in                |  20 +-
 config/busybox/shell/Config.in                |  11 +-
 config/busybox/sysklogd/Config.in             |   8 +-
 config/busybox/util-linux/Config.in           | 117 +++++------
 .../0200-reactivate-check-for-tty.patch       |   0
 ...-only-pass-real-libs-to-SELINUX_LIBS.patch |   0
 ...honour-SKIP_STRIP-and-don-t-strip-if.patch |   0
 ...-Fix-compilation-with-Linux-v6.8-rc1.patch |   0
 .../{busybox-1.36.1 => busybox-1.37.0}/series |   0
 rules/busybox.make                            |   4 +-
 28 files changed, 366 insertions(+), 333 deletions(-)
 rename patches/{busybox-1.36.1 => busybox-1.37.0}/0200-reactivate-check-for-tty.patch (100%)
 rename patches/{busybox-1.36.1 => busybox-1.37.0}/0201-build-system-only-pass-real-libs-to-SELINUX_LIBS.patch (100%)
 rename patches/{busybox-1.36.1 => busybox-1.37.0}/0202-scripts-trylink-honour-SKIP_STRIP-and-don-t-strip-if.patch (100%)
 rename patches/{busybox-1.36.1 => busybox-1.37.0}/0203-tc-Fix-compilation-with-Linux-v6.8-rc1.patch (100%)
 rename patches/{busybox-1.36.1 => busybox-1.37.0}/series (100%)

diff --git a/config/busybox/Config.in b/config/busybox/Config.in
index 199cc6ab2..2e3a8f1ba 100644
--- a/config/busybox/Config.in
+++ b/config/busybox/Config.in
@@ -108,6 +108,17 @@ config BUSYBOX_LFS
 	programs that can benefit from large file support include dd, gzip,
 	cp, mount, tar.
 
+config BUSYBOX_TIME64
+	bool "Support 64bit wide time types"
+	default y
+	depends on BUSYBOX_LFS
+	help
+	Make times later than 2038 representable for several libc syscalls
+	(stat, clk_gettime etc.). Note this switch is specific to glibc
+	and has no effect on platforms that already use 64bit wide time types
+	(i.e. all 64bit archs and some selected 32bit archs (currently riscv
+	and x32)).
+
 config BUSYBOX_PAM
 	bool "Support PAM (Pluggable Authentication Modules)"
 	default n
diff --git a/config/busybox/archival/Config.in b/config/busybox/archival/Config.in
index ca0499a75..aa4fea528 100644
--- a/config/busybox/archival/Config.in
+++ b/config/busybox/archival/Config.in
@@ -80,7 +80,7 @@ config BUSYBOX_FEATURE_GUNZIP_LONG_OPTIONS
 	default y
 	depends on (BUSYBOX_GUNZIP || BUSYBOX_ZCAT) && BUSYBOX_LONG_OPTS
 config BUSYBOX_BUNZIP2
-	bool "bunzip2 (8.7 kb)"
+	bool "bunzip2 (9.1 kb)"
 	default y
 	select BUSYBOX_FEATURE_BZIP2_DECOMPRESS
 	help
@@ -94,13 +94,13 @@ config BUSYBOX_BUNZIP2
 	should probably say N here.
 
 config BUSYBOX_BZCAT
-	bool "bzcat (8.7 kb)"
+	bool "bzcat (9 kb)"
 	default y
 	select BUSYBOX_FEATURE_BZIP2_DECOMPRESS
 	help
 	Alias to "bunzip2 -c".
 config BUSYBOX_UNLZMA
-	bool "unlzma (7.5 kb)"
+	bool "unlzma (7.8 kb)"
 	default y
 	help
 	unlzma is a compression utility using the Lempel-Ziv-Markov chain
@@ -109,7 +109,7 @@ config BUSYBOX_UNLZMA
 	compressors.
 
 config BUSYBOX_LZCAT
-	bool "lzcat (7.5 kb)"
+	bool "lzcat (7.8 kb)"
 	default y
 	help
 	Alias to "unlzma -c".
@@ -229,7 +229,7 @@ config BUSYBOX_DPKG
 	This implementation of dpkg has a number of limitations,
 	you should use the official dpkg if possible.
 config BUSYBOX_DPKG_DEB
-	bool "dpkg-deb (30 kb)"
+	bool "dpkg-deb (29 kb)"
 	default y
 	select BUSYBOX_FEATURE_SEAMLESS_GZ
 	help
@@ -282,7 +282,7 @@ config BUSYBOX_FEATURE_GZIP_DECOMPRESS
 	This will be automatically selected if gunzip or zcat is
 	enabled.
 config BUSYBOX_LZOP
-	bool "lzop (12 kb)"
+	bool "lzop (13 kb)"
 	default y
 	help
 	Lzop compression/decompresion.
diff --git a/config/busybox/console-tools/Config.in b/config/busybox/console-tools/Config.in
index d0e43ca43..ebb44f88c 100644
--- a/config/busybox/console-tools/Config.in
+++ b/config/busybox/console-tools/Config.in
@@ -7,39 +7,39 @@
 menu "Console Utilities"
 
 config BUSYBOX_CHVT
-	bool "chvt (2 kb)"
+	bool "chvt (2.2 kb)"
 	default y
 	help
 	This program is used to change to another terminal.
 	Example: chvt 4 (change to terminal /dev/tty4)
 config BUSYBOX_CLEAR
-	bool "clear (tiny)"
+	bool "clear (371 bytes)"
 	default y
 	help
 	This program clears the terminal screen.
 config BUSYBOX_DEALLOCVT
-	bool "deallocvt (1.9 kb)"
+	bool "deallocvt (2.2 kb)"
 	default y
 	help
 	This program deallocates unused virtual consoles.
 config BUSYBOX_DUMPKMAP
-	bool "dumpkmap (1.6 kb)"
+	bool "dumpkmap (1.9 kb)"
 	default y
 	help
 	This program dumps the kernel's keyboard translation table to
 	stdout, in binary format. You can then use loadkmap to load it.
 config BUSYBOX_FGCONSOLE
-	bool "fgconsole (1.5 kb)"
+	bool "fgconsole (1.8 kb)"
 	default y
 	help
 	This program prints active (foreground) console number.
 config BUSYBOX_KBD_MODE
-	bool "kbd_mode (4.1 kb)"
+	bool "kbd_mode (4.3 kb)"
 	default y
 	help
 	This program reports and sets keyboard mode.
 config BUSYBOX_LOADFONT
-	bool "loadfont (5.2 kb)"
+	bool "loadfont (5.4 kb)"
 	default y
 	help
 	This program loads a console font from standard input.
@@ -78,25 +78,25 @@ config BUSYBOX_FEATURE_LOADFONT_RAW
 	default y
 	depends on BUSYBOX_LOADFONT || BUSYBOX_SETFONT
 config BUSYBOX_LOADKMAP
-	bool "loadkmap (1.8 kb)"
+	bool "loadkmap (2.1 kb)"
 	default y
 	help
 	This program loads a keyboard translation table from
 	standard input.
 config BUSYBOX_OPENVT
-	bool "openvt (7.2 kb)"
+	bool "openvt (7.4 kb)"
 	default y
 	help
 	This program is used to start a command on an unused
 	virtual terminal.
 config BUSYBOX_RESET
-	bool "reset (345 bytes)"
+	bool "reset (676 bytes)"
 	default y
 	help
 	This program is used to reset the terminal screen, if it
 	gets messed up.
 config BUSYBOX_RESIZE
-	bool "resize (903 bytes)"
+	bool "resize (1.2 kb)"
 	default y
 	help
 	This program is used to (re)set the width and height of your current
@@ -112,7 +112,7 @@ config BUSYBOX_FEATURE_RESIZE_PRINT
 	E.g.:
 	COLUMNS=80;LINES=44;export COLUMNS LINES;
 config BUSYBOX_SETCONSOLE
-	bool "setconsole (3.6 kb)"
+	bool "setconsole (3.8 kb)"
 	default y
 	help
 	Redirect writes to /dev/console to another device,
@@ -125,18 +125,18 @@ config BUSYBOX_FEATURE_SETCONSOLE_LONG_OPTIONS
 	default y
 	depends on BUSYBOX_SETCONSOLE && BUSYBOX_LONG_OPTS
 config BUSYBOX_SETKEYCODES
-	bool "setkeycodes (2.1 kb)"
+	bool "setkeycodes (2.4 kb)"
 	default y
 	help
 	This program loads entries into the kernel's scancode-to-keycode
 	map, allowing unusual keyboards to generate usable keycodes.
 config BUSYBOX_SETLOGCONS
-	bool "setlogcons (1.8 kb)"
+	bool "setlogcons (2 kb)"
 	default y
 	help
 	This program redirects the output console of kernel messages.
 config BUSYBOX_SHOWKEY
-	bool "showkey (4.7 kb)"
+	bool "showkey (4.9 kb)"
 	default y
 	help
 	Shows keys pressed.
diff --git a/config/busybox/coreutils/Config.in b/config/busybox/coreutils/Config.in
index 1a95a6785..6c4704f00 100644
--- a/config/busybox/coreutils/Config.in
+++ b/config/busybox/coreutils/Config.in
@@ -48,14 +48,14 @@ config BUSYBOX_FEATURE_HUMAN_READABLE
 	Allow df, du, and ls to have human readable output.
 
 config BUSYBOX_BASENAME
-	bool "basename (438 bytes)"
+	bool "basename (3.7 kb)"
 	default y
 	help
 	basename is used to strip the directory and suffix from filenames,
 	leaving just the filename itself. Enable this option if you wish
 	to enable the 'basename' utility.
 config BUSYBOX_CAT
-	bool "cat (5.6 kb)"
+	bool "cat (5.8 kb)"
 	default y
 	help
 	cat is used to concatenate files and print them to the standard
@@ -96,20 +96,20 @@ config BUSYBOX_FEATURE_CHOWN_LONG_OPTIONS
 	default y
 	depends on BUSYBOX_CHOWN && BUSYBOX_LONG_OPTS
 config BUSYBOX_CHROOT
-	bool "chroot (3.7 kb)"
+	bool "chroot (4 kb)"
 	default y
 	help
 	chroot is used to change the root directory and run a command.
 	The default command is '/bin/sh'.
 config BUSYBOX_CKSUM
-	bool "cksum (4.1 kb)"
+	bool "cksum (4.3 kb)"
 	default y
 
 config BUSYBOX_CRC32
-	bool "crc32 (4.1 kb)"
+	bool "crc32 (4.2 kb)"
 	default y
 config BUSYBOX_COMM
-	bool "comm (4.2 kb)"
+	bool "comm (4.4 kb)"
 	default y
 	help
 	comm is used to compare two files line by line and return
@@ -133,7 +133,7 @@ config BUSYBOX_FEATURE_CP_REFLINK
 	default y
 	depends on BUSYBOX_FEATURE_CP_LONG_OPTIONS
 config BUSYBOX_CUT
-	bool "cut (5.8 kb)"
+	bool "cut (6.7 kb)"
 	default y
 	help
 	cut is used to print selected parts of lines from
@@ -146,7 +146,7 @@ config BUSYBOX_FEATURE_CUT_REGEX
 	help
 	Allow regex based delimiters.
 config BUSYBOX_DATE
-	bool "date (7 kb)"
+	bool "date (7.2 kb)"
 	default y
 	help
 	date is used to set the system date or display the
@@ -183,7 +183,7 @@ config BUSYBOX_FEATURE_DATE_COMPAT
 	the same format. With it on, 'date DATE' additionally supports
 	MMDDhhmm[[YY]YY][.ss] format.
 config BUSYBOX_DD
-	bool "dd (7.5 kb)"
+	bool "dd (8.3 kb)"
 	default y
 	help
 	dd copies a file (from standard input to standard output,
@@ -227,7 +227,7 @@ config BUSYBOX_FEATURE_DD_STATUS
 	help
 	Enable support for status=noxfer/none option.
 config BUSYBOX_DF
-	bool "df (6.8 kb)"
+	bool "df (7.1 kb)"
 	default y
 	help
 	df reports the amount of disk space used and available
@@ -262,26 +262,26 @@ config BUSYBOX_FEATURE_SKIP_ROOTFS
 
 	Otherwise, choose Y.
 config BUSYBOX_DIRNAME
-	bool "dirname (329 bytes)"
+	bool "dirname (611 bytes)"
 	default y
 	help
 	dirname is used to strip a non-directory suffix from
 	a file name.
 config BUSYBOX_DOS2UNIX
-	bool "dos2unix (5.2 kb)"
+	bool "dos2unix (5.5 kb)"
 	default y
 	help
 	dos2unix is used to convert a text file from DOS format to
 	UNIX format, and vice versa.
 
 config BUSYBOX_UNIX2DOS
-	bool "unix2dos (5.2 kb)"
+	bool "unix2dos (5.5 kb)"
 	default y
 	help
 	unix2dos is used to convert a text file from UNIX format to
 	DOS format, and vice versa.
 config BUSYBOX_DU
-	bool "du (6.3 kb)"
+	bool "du (6.5 kb)"
 	default y
 	help
 	du is used to report the amount of disk space used
@@ -292,7 +292,7 @@ config BUSYBOX_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
 	default y
 	depends on BUSYBOX_DU
 config BUSYBOX_ECHO
-	bool "echo (1.8 kb)"
+	bool "echo (2 kb)"
 	default y
 	help
 	echo prints a specified string to stdout.
@@ -303,25 +303,25 @@ config BUSYBOX_FEATURE_FANCY_ECHO
 	default y
 	depends on BUSYBOX_ECHO || BUSYBOX_ASH_ECHO || BUSYBOX_HUSH_ECHO
 config BUSYBOX_ENV
-	bool "env (4 kb)"
+	bool "env (4.3 kb)"
 	default y
 	help
 	env is used to set an environment variable and run
 	a command; without options it displays the current
 	environment.
 config BUSYBOX_EXPAND
-	bool "expand (5.1 kb)"
+	bool "expand (5.3 kb)"
 	default y
 	help
 	By default, convert all tabs to spaces.
 
 config BUSYBOX_UNEXPAND
-	bool "unexpand (5.3 kb)"
+	bool "unexpand (5.5 kb)"
 	default y
 	help
 	By default, convert only leading sequences of blanks to tabs.
 config BUSYBOX_EXPR
-	bool "expr (6.6 kb)"
+	bool "expr (6.8 kb)"
 	default y
 	help
 	expr is used to calculate numbers and print the result
@@ -336,22 +336,22 @@ config BUSYBOX_EXPR_MATH_SUPPORT_64
 	the applet slightly larger, but will allow computation with very
 	large numbers.
 config BUSYBOX_FACTOR
-	bool "factor (2.7 kb)"
+	bool "factor (3.2 kb)"
 	default y
 	help
 	factor factorizes integers
 config BUSYBOX_FALSE
-	bool "false (tiny)"
+	bool "false (314 bytes)"
 	default y
 	help
 	false returns an exit code of FALSE (1).
 config BUSYBOX_FOLD
-	bool "fold (4.6 kb)"
+	bool "fold (4.8 kb)"
 	default y
 	help
 	Wrap text to fit a specific width.
 config BUSYBOX_HEAD
-	bool "head (3.8 kb)"
+	bool "head (4 kb)"
 	default y
 	help
 	head is used to print the first specified number of lines
@@ -362,19 +362,19 @@ config BUSYBOX_FEATURE_FANCY_HEAD
 	default y
 	depends on BUSYBOX_HEAD
 config BUSYBOX_HOSTID
-	bool "hostid (286 bytes)"
+	bool "hostid (566 bytes)"
 	default y
 	help
 	hostid prints the numeric identifier (in hexadecimal) for
 	the current host.
 config BUSYBOX_ID
-	bool "id (7 kb)"
+	bool "id (7.1 kb)"
 	default y
 	help
 	id displays the current user and group ID names.
 
 config BUSYBOX_GROUPS
-	bool "groups (6.7 kb)"
+	bool "groups (6.8 kb)"
 	default y
 	help
 	Print the group names associated with current user id.
@@ -389,17 +389,17 @@ config BUSYBOX_FEATURE_INSTALL_LONG_OPTIONS
 	default y
 	depends on BUSYBOX_INSTALL && BUSYBOX_LONG_OPTS
 config BUSYBOX_LINK
-	bool "link (3.2 kb)"
+	bool "link (3.5 kb)"
 	default y
 	help
 	link creates hard links between files.
 config BUSYBOX_LN
-	bool "ln (4.9 kb)"
+	bool "ln (5.1 kb)"
 	default y
 	help
 	ln is used to create hard or soft links between files.
 config BUSYBOX_LOGNAME
-	bool "logname (1.1 kb)"
+	bool "logname (1.4 kb)"
 	default y
 	help
 	logname is used to print the current user's login name.
@@ -468,31 +468,31 @@ config BUSYBOX_FEATURE_LS_COLOR_IS_DEFAULT
 	configurable, and the output may not be legible on
 	many output screens.
 config BUSYBOX_MD5SUM
-	bool "md5sum (6.5 kb)"
+	bool "md5sum (6.7 kb)"
 	default y
 	help
 	Compute and check MD5 message digest
 
 config BUSYBOX_SHA1SUM
-	bool "sha1sum (5.9 kb)"
+	bool "sha1sum (6.7 kb)"
 	default y
 	help
 	Compute and check SHA1 message digest
 
 config BUSYBOX_SHA256SUM
-	bool "sha256sum (7 kb)"
+	bool "sha256sum (8.2 kb)"
 	default y
 	help
 	Compute and check SHA256 message digest
 
 config BUSYBOX_SHA512SUM
-	bool "sha512sum (7.4 kb)"
+	bool "sha512sum (7.3 kb)"
 	default y
 	help
 	Compute and check SHA512 message digest
 
 config BUSYBOX_SHA3SUM
-	bool "sha3sum (6.1 kb)"
+	bool "sha3sum (6.3 kb)"
 	default y
 	help
 	Compute and check SHA3 message digest
@@ -509,24 +509,24 @@ config BUSYBOX_FEATURE_MD5_SHA1_SUM_CHECK
 	against pre-calculated hash values.
 	-s and -w are useful options when verifying checksums.
 config BUSYBOX_MKDIR
-	bool "mkdir (4.5 kb)"
+	bool "mkdir (4.7 kb)"
 	default y
 	help
 	mkdir is used to create directories with the specified names.
 config BUSYBOX_MKFIFO
-	bool "mkfifo (3.8 kb)"
+	bool "mkfifo (4 kb)"
 	default y
 	help
 	mkfifo is used to create FIFOs (named pipes).
 	The 'mknod' program can also create FIFOs.
 config BUSYBOX_MKNOD
-	bool "mknod (4.5 kb)"
+	bool "mknod (4.6 kb)"
 	default y
 	help
 	mknod is used to create FIFOs or block/character special
 	files with the specified names.
 config BUSYBOX_MKTEMP
-	bool "mktemp (4.2 kb)"
+	bool "mktemp (4.5 kb)"
 	default y
 	help
 	mktemp is used to create unique temporary files
@@ -536,22 +536,22 @@ config BUSYBOX_MV
 	help
 	mv is used to move or rename files or directories.
 config BUSYBOX_NICE
-	bool "nice (2.1 kb)"
+	bool "nice (2.3 kb)"
 	default y
 	help
 	nice runs a program with modified scheduling priority.
 config BUSYBOX_NL
-	bool "nl (4.6 kb)"
+	bool "nl (4.9 kb)"
 	default y
 	help
 	nl is used to number lines of files.
 config BUSYBOX_NOHUP
-	bool "nohup (2 kb)"
+	bool "nohup (2.2 kb)"
 	default y
 	help
 	run a command immune to hangups, with output to a non-tty.
 config BUSYBOX_NPROC
-	bool "nproc (3.7 kb)"
+	bool "nproc (3.9 kb)"
 	default y
 	help
 	Print number of CPUs
@@ -561,29 +561,29 @@ config BUSYBOX_OD
 	help
 	od is used to dump binary files in octal and other formats.
 config BUSYBOX_PASTE
-	bool "paste (4.9 kb)"
+	bool "paste (5.1 kb)"
 	default y
 	help
 	paste is used to paste lines of different files together
 	and write the result to stdout
 config BUSYBOX_PRINTENV
-	bool "printenv (1.3 kb)"
+	bool "printenv (1.6 kb)"
 	default y
 	help
 	printenv is used to print all or part of environment.
 config BUSYBOX_PRINTF
-	bool "printf (3.8 kb)"
+	bool "printf (4.1 kb)"
 	default y
 	help
 	printf is used to format and print specified strings.
 	It's similar to 'echo' except it has more options.
 config BUSYBOX_PWD
-	bool "pwd (3.7 kb)"
+	bool "pwd (4 kb)"
 	default y
 	help
 	pwd is used to print the current directory.
 config BUSYBOX_READLINK
-	bool "readlink (4 kb)"
+	bool "readlink (4.8 kb)"
 	default y
 	help
 	This program reads a symbolic link and returns the name
@@ -596,49 +596,50 @@ config BUSYBOX_FEATURE_READLINK_FOLLOW
 	help
 	Enable the readlink option (-f).
 config BUSYBOX_REALPATH
-	bool "realpath (1.6 kb)"
+	bool "realpath (2.5 kb)"
 	default y
 	help
 	Return the canonicalized absolute pathname.
 	This isn't provided by GNU shellutils, but where else does it belong.
 config BUSYBOX_RM
-	bool "rm (5.4 kb)"
+	bool "rm (5.5 kb)"
 	default y
 	help
 	rm is used to remove files or directories.
 config BUSYBOX_RMDIR
-	bool "rmdir (3.5 kb)"
+	bool "rmdir (3.8 kb)"
 	default y
 	help
 	rmdir is used to remove empty directories.
 config BUSYBOX_SEQ
-	bool "seq (3.8 kb)"
+	bool "seq (4 kb)"
 	default y
 	help
 	print a sequence of numbers
 config BUSYBOX_SHRED
-	bool "shred (4.9 kb)"
+	bool "shred (5.5 kb)"
 	default y
 	help
 	Overwrite a file to hide its contents, and optionally delete it
 config BUSYBOX_SHUF
-	bool "shuf (5.4 kb)"
+	bool "shuf (6 kb)"
 	default y
 	help
 	Generate random permutations
 config BUSYBOX_SLEEP
-	bool "sleep (2 kb)"
+	bool "sleep (2.4 kb)"
 	default y
 	help
 	sleep is used to pause for a specified number of seconds.
-	It comes in 3 versions:
+	It comes in 2 versions:
 	- small: takes one integer parameter
-	- fancy: takes multiple integer arguments with suffixes:
-		sleep 1d 2h 3m 15s
-	- fancy with fractional numbers:
-		sleep 2.3s 4.5h sleeps for 16202.3 seconds
-	Last one is "the most compatible" with coreutils sleep,
-	but it adds around 1k of code.
+	- fancy:
+		* takes multiple integer arguments with suffixes:
+			sleep 1d 2h 3m 15s
+		* allows fractional numbers:
+			sleep 2.3s 4.5h sleeps for 16202.3 seconds
+	fancy is more compatible with coreutils sleep, but it adds around
+	1k of code.
 
 config BUSYBOX_FEATURE_FANCY_SLEEP
 	bool "Enable multiple arguments and s/m/h/d suffixes"
@@ -647,7 +648,7 @@ config BUSYBOX_FEATURE_FANCY_SLEEP
 	help
 	Allow sleep to pause for specified minutes, hours, and days.
 config BUSYBOX_SORT
-	bool "sort (7.7 kb)"
+	bool "sort (8.1 kb)"
 	default y
 	help
 	sort is used to sort lines of text in specified files.
@@ -672,7 +673,7 @@ config BUSYBOX_FEATURE_SORT_OPTIMIZE_MEMORY
 	Attempt to use less memory (by storing only one copy
 	of duplicated lines, and such). Useful if you work on huge files.
 config BUSYBOX_SPLIT
-	bool "split (5 kb)"
+	bool "split (5.2 kb)"
 	default y
 	help
 	Split a file into pieces.
@@ -708,17 +709,17 @@ config BUSYBOX_FEATURE_STAT_FILESYSTEM
 	Without this, stat will not support the '-f' option to display
 	information about filesystem status.
 config BUSYBOX_STTY
-	bool "stty (8.9 kb)"
+	bool "stty (9.2 kb)"
 	default y
 	help
 	stty is used to change and print terminal line settings.
 config BUSYBOX_SUM
-	bool "sum (4 kb)"
+	bool "sum (4.2 kb)"
 	default y
 	help
 	checksum and count the blocks in a file
 config BUSYBOX_SYNC
-	bool "sync (3.8 kb)"
+	bool "sync (4 kb)"
 	default y
 	help
 	sync is used to flush filesystem buffers.
@@ -730,17 +731,17 @@ config BUSYBOX_FEATURE_SYNC_FANCY
 	sync -d FILE... executes fdatasync() on each FILE.
 	sync -f FILE... executes syncfs() on each FILE.
 config BUSYBOX_FSYNC
-	bool "fsync (3.6 kb)"
+	bool "fsync (3.8 kb)"
 	default y
 	help
 	fsync is used to flush file-related cached blocks to disk.
 config BUSYBOX_TAC
-	bool "tac (3.9 kb)"
+	bool "tac (4.1 kb)"
 	default y
 	help
 	tac is used to concatenate and print files in reverse.
 config BUSYBOX_TAIL
-	bool "tail (6.8 kb)"
+	bool "tail (7.2 kb)"
 	default y
 	help
 	tail is used to print the last specified number of lines
@@ -758,7 +759,7 @@ config BUSYBOX_FEATURE_FANCY_TAIL
 		-v      Always output headers giving file names
 		-F      Same as -f, but keep retrying
 config BUSYBOX_TEE
-	bool "tee (4.2 kb)"
+	bool "tee (4.4 kb)"
 	default y
 	help
 	tee is used to read from standard input and write
@@ -771,7 +772,7 @@ config BUSYBOX_FEATURE_TEE_USE_BLOCK_IO
 	help
 	Enable this option for a faster tee, at expense of size.
 config BUSYBOX_TEST
-	bool "test (4.1 kb)"
+	bool "test (4.4 kb)"
 	default y
 	help
 	test is used to check file types and compare values,
@@ -797,13 +798,13 @@ config BUSYBOX_FEATURE_TEST_64
 	help
 	Enable 64-bit support in test.
 config BUSYBOX_TIMEOUT
-	bool "timeout (6 kb)"
+	bool "timeout (6.5 kb)"
 	default y
 	help
 	Runs a program and watches it. If it does not terminate in
 	specified number of seconds, it is sent a signal.
 config BUSYBOX_TOUCH
-	bool "touch (5.9 kb)"
+	bool "touch (6.1 kb)"
 	default y
 	help
 	touch is used to create or change the access and/or
@@ -816,7 +817,7 @@ config BUSYBOX_FEATURE_TOUCH_SUSV3
 	help
 	Enable touch to use a reference file or a given date/time argument.
 config BUSYBOX_TR
-	bool "tr (5.1 kb)"
+	bool "tr (5.3 kb)"
 	default y
 	help
 	tr is used to squeeze, and/or delete characters from standard
@@ -841,29 +842,29 @@ config BUSYBOX_FEATURE_TR_EQUIV
 	useful for cases when no other way of expressing a character
 	is possible.
 config BUSYBOX_TRUE
-	bool "true (tiny)"
+	bool "true (311 bytes)"
 	default y
 	help
 	true returns an exit code of TRUE (0).
 config BUSYBOX_TRUNCATE
-	bool "truncate (4.2 kb)"
+	bool "truncate (4.4 kb)"
 	default y
 	help
 	truncate truncates files to a given size. If a file does
 	not exist, it is created unless told otherwise.
 config BUSYBOX_TSORT
-	bool "tsort (0.7 kb)"
+	bool "tsort (2.6 kb)"
 	default y
 	help
 	tsort performs a topological sort.
 config BUSYBOX_TTY
-	bool "tty (3.6 kb)"
+	bool "tty (3.9 kb)"
 	default y
 	help
 	tty is used to print the name of the current terminal to
 	standard output.
 config BUSYBOX_UNAME
-	bool "uname (3.9 kb)"
+	bool "uname (4.2 kb)"
 	default y
 	help
 	uname is used to print system information.
@@ -877,47 +878,47 @@ config BUSYBOX_UNAME_OSNAME
 	default is "
 
 config BUSYBOX_BB_ARCH
-	bool "arch (1.1 kb)"
+	bool "arch (1.4 kb)"
 	default y
 	help
 	Same as uname -m.
 config BUSYBOX_UNIQ
-	bool "uniq (4.9 kb)"
+	bool "uniq (5.1 kb)"
 	default y
 	help
 	uniq is used to remove duplicate lines from a sorted file.
 config BUSYBOX_UNLINK
-	bool "unlink (3.2 kb)"
+	bool "unlink (3.5 kb)"
 	default y
 	help
 	unlink deletes a file by calling unlink()
 config BUSYBOX_USLEEP
-	bool "usleep (1.3 kb)"
+	bool "usleep (1.6 kb)"
 	default y
 	help
 	usleep is used to pause for a specified number of microseconds.
 config BUSYBOX_UUDECODE
-	bool "uudecode (5.8 kb)"
+	bool "uudecode (5.9 kb)"
 	default y
 	help
 	uudecode is used to decode a uuencoded file.
 config BUSYBOX_BASE32
-	bool "base32 (4.9 kb)"
+	bool "base32 (5.5 kb)"
 	default y
 	help
 	Base32 encode and decode
 config BUSYBOX_BASE64
-	bool "base64 (4.9 kb)"
+	bool "base64 (5.3 kb)"
 	default y
 	help
 	Base64 encode and decode
 config BUSYBOX_UUENCODE
-	bool "uuencode (4.4 kb)"
+	bool "uuencode (4.7 kb)"
 	default y
 	help
 	uuencode is used to uuencode a file.
 config BUSYBOX_WC
-	bool "wc (4.5 kb)"
+	bool "wc (4.7 kb)"
 	default y
 	help
 	wc is used to print the number of bytes, words, and lines,
@@ -930,33 +931,33 @@ config BUSYBOX_FEATURE_WC_LARGE
 	help
 	Use "unsigned long long" for counter variables.
 config BUSYBOX_WHO
-	bool "who (3.9 kb)"
+	bool "who (5.6 kb)"
 	default y
 	depends on BUSYBOX_FEATURE_UTMP
 	help
 	Print users currently logged on.
 
 config BUSYBOX_W
-	bool "w (3.8 kb)"
+	bool "w (5.5 kb)"
 	default y
 	depends on BUSYBOX_FEATURE_UTMP
 	help
 	Print users currently logged on.
 
 config BUSYBOX_USERS
-	bool "users (3.4 kb)"
+	bool "users (3.6 kb)"
 	default y
 	depends on BUSYBOX_FEATURE_UTMP
 	help
 	Print users currently logged on.
 config BUSYBOX_WHOAMI
-	bool "whoami (3.2 kb)"
+	bool "whoami (3.5 kb)"
 	default y
 	help
 	whoami is used to print the username of the current
 	user id (same as id -un).
 config BUSYBOX_YES
-	bool "yes (1.2 kb)"
+	bool "yes (1.5 kb)"
 	default y
 	help
 	yes is used to repeatedly output a specific string, or
diff --git a/config/busybox/debianutils/Config.in b/config/busybox/debianutils/Config.in
index d215debab..f0ce003f2 100644
--- a/config/busybox/debianutils/Config.in
+++ b/config/busybox/debianutils/Config.in
@@ -7,12 +7,12 @@
 menu "Debian Utilities"
 
 config BUSYBOX_PIPE_PROGRESS
-	bool "pipe_progress (275 bytes)"
+	bool "pipe_progress (576 bytes)"
 	default y
 	help
 	Display a dot to indicate pipe activity.
 config BUSYBOX_RUN_PARTS
-	bool "run-parts (6.1 kb)"
+	bool "run-parts (6.2 kb)"
 	default y
 	help
 	run-parts is a utility designed to run all the scripts in a directory.
@@ -61,7 +61,7 @@ config BUSYBOX_FEATURE_START_STOP_DAEMON_FANCY
 	-v|--verbose
 	-N|--nicelevel N
 config BUSYBOX_WHICH
-	bool "which (3.8 kb)"
+	bool "which (4 kb)"
 	default y
 	help
 	which is used to find programs in your PATH and
diff --git a/config/busybox/e2fsprogs/Config.in b/config/busybox/e2fsprogs/Config.in
index 2abc80f96..ebc276540 100644
--- a/config/busybox/e2fsprogs/Config.in
+++ b/config/busybox/e2fsprogs/Config.in
@@ -7,19 +7,19 @@
 menu "Linux Ext2 FS Progs"
 
 config BUSYBOX_CHATTR
-	bool "chattr (3.8 kb)"
+	bool "chattr (4.1 kb)"
 	default y
 	help
 	chattr changes the file attributes on a second extended file system.
 config BUSYBOX_FSCK
-	bool "fsck (7.4 kb)"
+	bool "fsck (7.6 kb)"
 	default y
 	help
 	fsck is used to check and optionally repair one or more filesystems.
 	In actuality, fsck is simply a front-end for the various file system
 	checkers (fsck.fstype) available under Linux.
 config BUSYBOX_LSATTR
-	bool "lsattr (5.5 kb)"
+	bool "lsattr (5.7 kb)"
 	default y
 	help
 	lsattr lists the file attributes on a second extended file system.
diff --git a/config/busybox/editors/Config.in b/config/busybox/editors/Config.in
index 2858f60d1..c03395f2b 100644
--- a/config/busybox/editors/Config.in
+++ b/config/busybox/editors/Config.in
@@ -7,7 +7,7 @@
 menu "Editors"
 
 config BUSYBOX_AWK
-	bool "awk (23 kb)"
+	bool "awk (24 kb)"
 	default y
 	help
 	Awk is used as a pattern scanning and processing language.
@@ -31,7 +31,7 @@ config BUSYBOX_FEATURE_AWK_GNU_EXTENSIONS
 	This enables the use of awk library files.
 	Example: awk -f mylib.awk -e '{print myfunction($1);}' ...
 config BUSYBOX_CMP
-	bool "cmp (4.9 kb)"
+	bool "cmp (5.3 kb)"
 	default y
 	help
 	cmp is used to compare two files and returns the result
@@ -57,14 +57,14 @@ config BUSYBOX_FEATURE_DIFF_DIR
 	This option enables support for directory and subdirectory
 	comparison.
 config BUSYBOX_ED
-	bool "ed (21 kb)"
+	bool "ed (16 kb)"
 	default y
 	help
 	The original 1970's Unix text editor, from the days of teletypes.
 	Small, simple, evil. Part of SUSv3. If you're not already using
 	this, you don't need it.
 config BUSYBOX_PATCH
-	bool "patch (9.4 kb)"
+	bool "patch (9.6 kb)"
 	default y
 	help
 	Apply a unified diff formatted patch.
@@ -75,7 +75,7 @@ config BUSYBOX_SED
 	sed is used to perform text transformations on a file
 	or input from a pipeline.
 config BUSYBOX_VI
-	bool "vi (23 kb)"
+	bool "vi (26 kb)"
 	default y
 	help
 	'vi' is a text editor. More specifically, it is the One True
diff --git a/config/busybox/findutils/Config.in b/config/busybox/findutils/Config.in
index d4aa403a5..f1b76b7df 100644
--- a/config/busybox/findutils/Config.in
+++ b/config/busybox/findutils/Config.in
@@ -7,7 +7,7 @@
 menu "Finding Utilities"
 
 config BUSYBOX_FIND
-	bool "find (14 kb)"
+	bool "find (16 kb)"
 	default y
 	help
 	find is used to search your system to find specified files.
@@ -136,6 +136,13 @@ config BUSYBOX_FEATURE_FIND_EXEC_PLUS
 	Without this option, -exec + is a synonym for -exec ;
 	(IOW: it works correctly, but without expected speedup)
 
+config BUSYBOX_FEATURE_FIND_EXEC_OK
+	bool "Enable -ok: execute confirmed commands"
+	default y
+	depends on BUSYBOX_FEATURE_FIND_EXEC
+	help
+	Support the 'find -ok' option which prompts before executing.
+
 config BUSYBOX_FEATURE_FIND_USER
 	bool "Enable -user: username/uid matching"
 	default y
@@ -234,19 +241,19 @@ config BUSYBOX_FEATURE_FIND_LINKS
 	help
 	Support the 'find -links' option for matching number of links.
 config BUSYBOX_GREP
-	bool "grep (8.6 kb)"
+	bool "grep (8.9 kb)"
 	default y
 	help
 	grep is used to search files for a specified pattern.
 
 config BUSYBOX_EGREP
-	bool "egrep (7.8 kb)"
+	bool "egrep (8 kb)"
 	default y
 	help
 	Alias to "grep -E".
 
 config BUSYBOX_FGREP
-	bool "fgrep (7.8 kb)"
+	bool "fgrep (8 kb)"
 	default y
 	help
 	Alias to "grep -F".
@@ -260,7 +267,7 @@ config BUSYBOX_FEATURE_GREP_CONTEXT
 	context surrounding our matching lines.
 	Print the specified number of context lines (-C).
 config BUSYBOX_XARGS
-	bool "xargs (7.2 kb)"
+	bool "xargs (7.6 kb)"
 	default y
 	help
 	xargs is used to execute a specified command for
diff --git a/config/busybox/init/Config.in b/config/busybox/init/Config.in
index f28f5bde5..f4e7f0dd7 100644
--- a/config/busybox/init/Config.in
+++ b/config/busybox/init/Config.in
@@ -45,19 +45,19 @@ config BUSYBOX_FEATURE_BOOTCHARTD_CONFIG_FILE
 	Enable reading and parsing of $PWD/bootchartd.conf
 	and /etc/bootchartd.conf files.
 config BUSYBOX_HALT
-	bool "halt (4 kb)"
+	bool "halt (4.3 kb)"
 	default y
 	help
 	Stop all processes and halt the system.
 
 config BUSYBOX_POWEROFF
-	bool "poweroff (4 kb)"
+	bool "poweroff (4.3 kb)"
 	default y
 	help
 	Stop all processes and power off the system.
 
 config BUSYBOX_REBOOT
-	bool "reboot (4 kb)"
+	bool "reboot (4.3 kb)"
 	default y
 	help
 	Stop all processes and reboot the system.
diff --git a/config/busybox/klibc-utils/Config.in b/config/busybox/klibc-utils/Config.in
index f2ff057fb..996f9dd93 100644
--- a/config/busybox/klibc-utils/Config.in
+++ b/config/busybox/klibc-utils/Config.in
@@ -17,12 +17,12 @@ config BUSYBOX_NUKE
 	help
 	Alias to "rm -rf".
 config BUSYBOX_RESUME
-	bool "resume (3.2 kb)"
+	bool "resume (3.6 kb)"
 	default y
 	help
 	Resume from saved "suspend-to-disk" image
 config BUSYBOX_RUN_INIT
-	bool "run-init (7.7 kb)"
+	bool "run-init (8 kb)"
 	default y
 	help
 	The run-init utility is used from initramfs to select a new
diff --git a/config/busybox/loginutils/Config.in b/config/busybox/loginutils/Config.in
index 5f12bbbee..5a406110f 100644
--- a/config/busybox/loginutils/Config.in
+++ b/config/busybox/loginutils/Config.in
@@ -93,18 +93,18 @@ config BUSYBOX_USE_BB_CRYPT_SHA
 	user which has password encrypted with these algorithms.
 
 config BUSYBOX_ADD_SHELL
-	bool "add-shell (3.1 kb)"
+	bool "add-shell (3.3 kb)"
 	default y if BUSYBOX_DESKTOP
 	help
 	Add shells to /etc/shells.
 
 config BUSYBOX_REMOVE_SHELL
-	bool "remove-shell (3 kb)"
+	bool "remove-shell (3.3 kb)"
 	default y if BUSYBOX_DESKTOP
 	help
 	Remove shells from /etc/shells.
 config BUSYBOX_ADDGROUP
-	bool "addgroup (8.6 kb)"
+	bool "addgroup (8.8 kb)"
 	default y
 	select BUSYBOX_LONG_OPTS
 	help
@@ -160,7 +160,7 @@ config BUSYBOX_LAST_SYSTEM_ID
 	help
 	Last valid system uid or gid for adduser and addgroup
 config BUSYBOX_CHPASSWD
-	bool "chpasswd (18 kb)"
+	bool "chpasswd (19 kb)"
 	default y
 	help
 	Reads a file of user name and password pairs from standard input
@@ -173,27 +173,27 @@ config BUSYBOX_FEATURE_DEFAULT_PASSWD_ALGO
 	help
 	Possible choices are "d[es]", "m[d5]", "s[ha256]" or "sha512".
 config BUSYBOX_CRYPTPW
-	bool "cryptpw (14 kb)"
+	bool "cryptpw (15 kb)"
 	default y
 	help
 	Encrypts the given password with the crypt(3) libc function
 	using the given salt.
 
 config BUSYBOX_MKPASSWD
-	bool "mkpasswd (15 kb)"
+	bool "mkpasswd (16 kb)"
 	default y
 	help
 	Encrypts the given password with the crypt(3) libc function
 	using the given salt. Debian has this utility under mkpasswd
 	name. Busybox provides mkpasswd as an alias for cryptpw.
 config BUSYBOX_DELUSER
-	bool "deluser (9.1 kb)"
+	bool "deluser (9.3 kb)"
 	default y
 	help
 	Utility for deleting a user account.
 
 config BUSYBOX_DELGROUP
-	bool "delgroup (6.4 kb)"
+	bool "delgroup (6.6 kb)"
 	default y
 	help
 	Utility for deleting a group account.
@@ -206,7 +206,7 @@ config BUSYBOX_FEATURE_DEL_USER_FROM_GROUP
 	If called with two non-option arguments, deluser
 	or delgroup will remove an user from a specified group.
 config BUSYBOX_GETTY
-	bool "getty (10 kb)"
+	bool "getty (11 kb)"
 	default y
 	select BUSYBOX_FEATURE_SYSLOG
 	help
@@ -224,7 +224,7 @@ config BUSYBOX_GETTY
 	read -r login
 	exec /bin/login "$login"
 config BUSYBOX_LOGIN
-	bool "login (24 kb)"
+	bool "login (25 kb)"
 	default y
 	select BUSYBOX_FEATURE_SYSLOG
 	help
@@ -269,7 +269,7 @@ config BUSYBOX_FEATURE_SECURETTY
 	The file contains the device names of tty lines (one per line,
 	without leading /dev/) on which root is allowed to login.
 config BUSYBOX_PASSWD
-	bool "passwd (21 kb)"
+	bool "passwd (22 kb)"
 	default y
 	select BUSYBOX_FEATURE_SYSLOG
 	help
@@ -312,14 +312,14 @@ config BUSYBOX_FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY
 	default n
 	depends on BUSYBOX_SU
 config BUSYBOX_SULOGIN
-	bool "sulogin (17 kb)"
+	bool "sulogin (18 kb)"
 	default y
 	select BUSYBOX_FEATURE_SYSLOG
 	help
 	sulogin is invoked when the system goes into single user
 	mode (this is done through an entry in inittab).
 config BUSYBOX_VLOCK
-	bool "vlock (17 kb)"
+	bool "vlock (18 kb)"
 	default y
 	help
 	Build the "vlock" applet which allows you to lock (virtual) terminals.
diff --git a/config/busybox/mailutils/Config.in b/config/busybox/mailutils/Config.in
index 29890dcbd..a246abfbb 100644
--- a/config/busybox/mailutils/Config.in
+++ b/config/busybox/mailutils/Config.in
@@ -9,12 +9,12 @@ config BUSYBOX_FEATURE_MIME_CHARSET
 	Default charset of the message.
 
 config BUSYBOX_MAKEMIME
-	bool "makemime (5.4 kb)"
+	bool "makemime (5.6 kb)"
 	default y
 	help
 	Create MIME-formatted messages.
 config BUSYBOX_POPMAILDIR
-	bool "popmaildir (10 kb)"
+	bool "popmaildir (11 kb)"
 	default y
 	help
 	Simple yet powerful POP3 mail popper. Delivers content
@@ -30,7 +30,7 @@ config BUSYBOX_FEATURE_POPMAILDIR_DELIVERY
 	Allow to use a custom program for message actual delivery
 	(-M "prog [args...]").
 config BUSYBOX_REFORMIME
-	bool "reformime (7.5 kb)"
+	bool "reformime (7.6 kb)"
 	default y
 	help
 	Parse MIME-formatted messages.
diff --git a/config/busybox/miscutils/Config.in b/config/busybox/miscutils/Config.in
index 5c04fd8ef..453dfe462 100644
--- a/config/busybox/miscutils/Config.in
+++ b/config/busybox/miscutils/Config.in
@@ -7,13 +7,13 @@
 menu "Miscellaneous Utilities"
 
 config BUSYBOX_ADJTIMEX
-	bool "adjtimex (4.7 kb)"
+	bool "adjtimex (4.9 kb)"
 	default y
 	help
 	Adjtimex reads and optionally sets adjustment parameters for
 	the Linux clock adjustment algorithm.
 config BUSYBOX_ASCII
-	bool "ascii"
+	bool "ascii (784 bytes)"
 	default y
 	help
 	Print ascii table.
@@ -39,7 +39,7 @@ config BUSYBOX_FEATURE_COMPRESS_BBCONFIG
 	and have very little memory, this might not be a win. Otherwise,
 	you probably want this.
 config BUSYBOX_BC
-	bool "bc (45 kb)"
+	bool "bc (38 kb)"
 	default y
 	select BUSYBOX_FEATURE_DC_BIG
 	help
@@ -63,7 +63,7 @@ config BUSYBOX_BC
 	  5) "read()" accepts expressions, not only numeric literals.
 
 config BUSYBOX_DC
-	bool "dc (36 kb)"
+	bool "dc (29 kb)"
 	default y
 	help
 	dc is a reverse-polish notation command-line calculator which
@@ -125,7 +125,7 @@ config BUSYBOX_FEATURE_BC_LONG_OPTIONS
 
 endif
 config BUSYBOX_BEEP
-	bool "beep (2.4 kb)"
+	bool "beep (2.7 kb)"
 	default y
 	help
 	The beep applets beeps in a given freq/Hz.
@@ -146,7 +146,7 @@ config BUSYBOX_FEATURE_BEEP_LENGTH_MS
 	help
 	Length in ms for default beep.
 config BUSYBOX_CHAT
-	bool "chat (6.3 kb)"
+	bool "chat (6.7 kb)"
 	default y
 	help
 	Simple chat utility.
@@ -220,7 +220,7 @@ config BUSYBOX_CONSPY
 	or        conspy -nd NUM  screenshot of console num
 	or        conspy -cs NUM  poor man's GNU screen like
 config BUSYBOX_CROND
-	bool "crond (14 kb)"
+	bool "crond (15 kb)"
 	default y
 	select BUSYBOX_FEATURE_SYSLOG
 	help
@@ -330,7 +330,7 @@ config BUSYBOX_FEATURE_DEVFS
 	/dev/loop0. If your /dev directory has normal names instead of
 	devfs names, you don't want this.
 config BUSYBOX_DEVMEM
-	bool "devmem (2.5 kb)"
+	bool "devmem (2.7 kb)"
 	default y
 	help
 	devmem is a small program that reads and writes from physical
@@ -380,6 +380,11 @@ config BUSYBOX_FLASHCP
 	help
 	The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
 	This utility is used to copy images into a MTD device.
+config BUSYBOX_GETFATTR
+	bool "getfattr (12.3 kb)"
+	default y
+	help
+	Get extended attributes on files
 config BUSYBOX_HDPARM
 	bool "hdparm (25 kb)"
 	default y
@@ -437,36 +442,36 @@ config BUSYBOX_FEATURE_HDPARM_HDIO_GETSET_DMA
 	help
 	Enable the 'hdparm -d' option to get/set using_dma flag.
 config BUSYBOX_HEXEDIT
-	bool "hexedit (21 kb)"
+	bool "hexedit (15 kb)"
 	default y
 	help
 	Edit file in hexadecimal.
 config BUSYBOX_I2CGET
-	bool "i2cget (5.5 kb)"
+	bool "i2cget (5.7 kb)"
 	default y
 	help
 	Read from I2C/SMBus chip registers.
 
 config BUSYBOX_I2CSET
-	bool "i2cset (6.7 kb)"
+	bool "i2cset (6.9 kb)"
 	default y
 	help
 	Set I2C registers.
 
 config BUSYBOX_I2CDUMP
-	bool "i2cdump (7.1 kb)"
+	bool "i2cdump (7.2 kb)"
 	default y
 	help
 	Examine I2C registers.
 
 config BUSYBOX_I2CDETECT
-	bool "i2cdetect (7.1 kb)"
+	bool "i2cdetect (7.3 kb)"
 	default y
 	help
 	Detect I2C chips.
 
 config BUSYBOX_I2CTRANSFER
-	bool "i2ctransfer (4.0 kb)"
+	bool "i2ctransfer (5.5 kb)"
 	default y
 	help
 	Send user-defined I2C messages in one transfer.
@@ -574,7 +579,7 @@ config BUSYBOX_FEATURE_LESS_ENV
 	This is essential for less applet to work with tools that use colors
 	and paging, such as git, systemd tools or nmcli.
 config BUSYBOX_LSSCSI
-	bool "lsscsi (2.5 kb)"
+	bool "lsscsi (2.9 kb)"
 	default y
 	help
 	lsscsi is a utility for displaying information about SCSI buses in the
@@ -582,7 +587,7 @@ config BUSYBOX_LSSCSI
 
 	This version uses sysfs (/sys/bus/scsi/devices) only.
 config BUSYBOX_MAKEDEVS
-	bool "makedevs (9.2 kb)"
+	bool "makedevs (9.4 kb)"
 	default y
 	help
 	'makedevs' is a utility used to create a batch of devices with
@@ -618,7 +623,7 @@ config BUSYBOX_MAN
 	help
 	Format and display manual pages.
 config BUSYBOX_MICROCOM
-	bool "microcom (5.7 kb)"
+	bool "microcom (5.9 kb)"
 	default y
 	help
 	The poor man's minicom utility for chatting with serial port devices.
@@ -630,36 +635,36 @@ config BUSYBOX_MIM
 	Run a script from a Makefile-like specification file.
 	Unlike 'make' dependencies aren't supported.
 config BUSYBOX_MT
-	bool "mt (2.5 kb)"
+	bool "mt (2.7 kb)"
 	default y
 	help
 	mt is used to control tape devices. You can use the mt utility
 	to advance or rewind a tape past a specified number of archive
 	files on the tape.
 config BUSYBOX_NANDWRITE
-	bool "nandwrite (4.8 kb)"
+	bool "nandwrite (5 kb)"
 	default y
 	help
 	Write to the specified MTD device, with bad blocks awareness
 
 config BUSYBOX_NANDDUMP
-	bool "nanddump (5.2 kb)"
+	bool "nanddump (5.4 kb)"
 	default y
 	help
 	Dump the content of raw NAND chip
 config BUSYBOX_PARTPROBE
-	bool "partprobe (3.5 kb)"
+	bool "partprobe (3.7 kb)"
 	default y
 	help
 	Ask kernel to rescan partition table.
 config BUSYBOX_RAIDAUTORUN
-	bool "raidautorun (1.3 kb)"
+	bool "raidautorun (1.6 kb)"
 	default y
 	help
 	raidautorun tells the kernel md driver to
 	search and start RAID arrays.
 config BUSYBOX_READAHEAD
-	bool "readahead (1.5 kb)"
+	bool "readahead (1.7 kb)"
 	default y
 	depends on BUSYBOX_LFS
 	help
@@ -686,7 +691,7 @@ config BUSYBOX_RFKILL
 	rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
 
 config BUSYBOX_RUNLEVEL
-	bool "runlevel (559 bytes)"
+	bool "runlevel (837 bytes)"
 	default y
 	depends on BUSYBOX_FEATURE_UTMP
 	help
@@ -695,50 +700,50 @@ config BUSYBOX_RUNLEVEL
 	This applet uses utmp but does not rely on busybox supporing
 	utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
 config BUSYBOX_RX
-	bool "rx (2.9 kb)"
+	bool "rx (3.2 kb)"
 	default y
 	help
 	Receive files using the Xmodem protocol.
 config BUSYBOX_SEEDRNG
-	bool "seedrng (1.3 kb)"
+	bool "seedrng (9.1 kb)"
 	default y
 	help
 	Seed the kernel RNG from seed files, meant to be called
 	once during startup, once during shutdown, and optionally
 	at some periodic interval in between.
 config BUSYBOX_SETFATTR
-	bool "setfattr (3.7 kb)"
+	bool "setfattr (3.9 kb)"
 	default y
 	help
 	Set/delete extended attributes on files
 config BUSYBOX_SETSERIAL
-	bool "setserial (6.9 kb)"
+	bool "setserial (7.1 kb)"
 	default y
 	help
 	Retrieve or set Linux serial port.
 config BUSYBOX_STRINGS
-	bool "strings (4.6 kb)"
+	bool "strings (4.8 kb)"
 	default y
 	help
 	strings prints the printable character sequences for each file
 	specified.
 config BUSYBOX_TIME
-	bool "time (6.8 kb)"
+	bool "time (8.1 kb)"
 	default y
 	help
 	The time command runs the specified program with the given arguments.
 	When the command finishes, time writes a message to standard output
 	giving timing statistics about this program run.
 config BUSYBOX_TREE
-	bool "tree (0.6 kb)"
+	bool "tree (2.5 kb)"
 	default y
 	help
 	List files and directories in a tree structure.
 config BUSYBOX_TS
-	bool "ts (450 bytes)"
+	bool "ts (4.4 kb)"
 	default y
 config BUSYBOX_TTYSIZE
-	bool "ttysize (432 bytes)"
+	bool "ttysize (718 bytes)"
 	default y
 	help
 	A replacement for "stty size". Unlike stty, can report only width,
@@ -746,52 +751,52 @@ config BUSYBOX_TTYSIZE
 	error, but returns default 80x24.
 	Usage in shell scripts: width=`ttysize w`.
 config BUSYBOX_UBIATTACH
-	bool "ubiattach (4.2 kb)"
+	bool "ubiattach (4.5 kb)"
 	default y
 	help
 	Attach MTD device to an UBI device.
 
 config BUSYBOX_UBIDETACH
-	bool "ubidetach (4.1 kb)"
+	bool "ubidetach (4.3 kb)"
 	default y
 	help
 	Detach MTD device from an UBI device.
 
 config BUSYBOX_UBIMKVOL
-	bool "ubimkvol (5.3 kb)"
+	bool "ubimkvol (5.5 kb)"
 	default y
 	help
 	Create a UBI volume.
 
 config BUSYBOX_UBIRMVOL
-	bool "ubirmvol (4.9 kb)"
+	bool "ubirmvol (5.1 kb)"
 	default y
 	help
 	Delete a UBI volume.
 
 config BUSYBOX_UBIRSVOL
-	bool "ubirsvol (4.2 kb)"
+	bool "ubirsvol (4.4 kb)"
 	default y
 	help
 	Resize a UBI volume.
 
 config BUSYBOX_UBIUPDATEVOL
-	bool "ubiupdatevol (5.2 kb)"
+	bool "ubiupdatevol (5.6 kb)"
 	default y
 	help
 	Update a UBI volume.
 config BUSYBOX_UBIRENAME
-	bool "ubirename (2.4 kb)"
+	bool "ubirename (2.7 kb)"
 	default y
 	help
 	Utility to rename UBI volumes
 config BUSYBOX_VOLNAME
-	bool "volname (1.6 kb)"
+	bool "volname (1.9 kb)"
 	default y
 	help
 	Prints a CD-ROM volume name.
 config BUSYBOX_WATCHDOG
-	bool "watchdog (5.3 kb)"
+	bool "watchdog (5.7 kb)"
 	default y
 	help
 	The watchdog utility is used with hardware or software watchdog
diff --git a/config/busybox/modutils/Config.in b/config/busybox/modutils/Config.in
index 609d76a09..dfa20e7c5 100644
--- a/config/busybox/modutils/Config.in
+++ b/config/busybox/modutils/Config.in
@@ -47,7 +47,7 @@ config BUSYBOX_INSMOD
 	help
 	insmod is used to load specified modules in the running kernel.
 config BUSYBOX_LSMOD
-	bool "lsmod (1.9 kb)"
+	bool "lsmod (2.1 kb)"
 	default y
 	help
 	lsmod is used to display a list of loaded modules.
@@ -66,7 +66,7 @@ config BUSYBOX_MODINFO
 	help
 	Show information about a Linux Kernel module
 config BUSYBOX_MODPROBE
-	bool "modprobe (28 kb)"
+	bool "modprobe (27 kb)"
 	default y
 	help
 	Handle the loading of modules, and their dependencies on a high
@@ -83,7 +83,7 @@ config BUSYBOX_FEATURE_MODPROBE_BLACKLIST
 	hardware autodetection scripts to load modules like evdev, frame
 	buffer drivers etc.
 config BUSYBOX_RMMOD
-	bool "rmmod (3.3 kb)"
+	bool "rmmod (3.5 kb)"
 	default y
 	help
 	rmmod is used to unload specified modules from the kernel.
diff --git a/config/busybox/networking/Config.in b/config/busybox/networking/Config.in
index 3a3ad56d9..e6af8b7b2 100644
--- a/config/busybox/networking/Config.in
+++ b/config/busybox/networking/Config.in
@@ -90,12 +90,12 @@ config BUSYBOX_ARP
 	help
 	Manipulate the system ARP cache.
 config BUSYBOX_ARPING
-	bool "arping (9 kb)"
+	bool "arping (9.1 kb)"
 	default y
 	help
 	Ping hosts by ARP packets.
 config BUSYBOX_BRCTL
-	bool "brctl (4.7 kb)"
+	bool "brctl (9.9 kb)"
 	default y
 	help
 	Manage ethernet bridges.
@@ -120,12 +120,12 @@ config BUSYBOX_FEATURE_BRCTL_SHOW
 	Add support for option which prints the current config:
 		show
 config BUSYBOX_DNSD
-	bool "dnsd (9.8 kb)"
+	bool "dnsd (10 kb)"
 	default y
 	help
 	Small and static DNS server daemon.
 config BUSYBOX_ETHER_WAKE
-	bool "ether-wake (4.9 kb)"
+	bool "ether-wake (5.2 kb)"
 	default y
 	help
 	Send a magic packet to wake up sleeping machines.
@@ -167,13 +167,13 @@ config BUSYBOX_FEATURE_FTPD_AUTHENTICATION
 	of the user it was started under, and does not require login.
 	Take care to not launch it under root.
 config BUSYBOX_FTPGET
-	bool "ftpget (7.8 kb)"
+	bool "ftpget (7.9 kb)"
 	default y
 	help
 	Retrieve a remote file via FTP.
 
 config BUSYBOX_FTPPUT
-	bool "ftpput (7.5 kb)"
+	bool "ftpput (7.6 kb)"
 	default y
 	help
 	Store a remote file via FTP.
@@ -183,13 +183,13 @@ config BUSYBOX_FEATURE_FTPGETPUT_LONG_OPTIONS
 	default y
 	depends on BUSYBOX_LONG_OPTS && (BUSYBOX_FTPGET || BUSYBOX_FTPPUT)
 config BUSYBOX_HOSTNAME
-	bool "hostname (5.5 kb)"
+	bool "hostname (5.8 kb)"
 	default y
 	help
 	Show or set the system's host name.
 
 config BUSYBOX_DNSDOMAINNAME
-	bool "dnsdomainname (3.6 kb)"
+	bool "dnsdomainname (3.8 kb)"
 	default y
 	help
 	Alias to "hostname -d".
@@ -408,7 +408,7 @@ config BUSYBOX_IFENSLAVE
 	Userspace application to bind several interfaces
 	to a logical interface (use with kernel bonding driver).
 config BUSYBOX_IFPLUGD
-	bool "ifplugd (10 kb)"
+	bool "ifplugd (11 kb)"
 	default y
 	help
 	Network interface plug detection daemon.
@@ -569,7 +569,7 @@ config BUSYBOX_IP
 	trying to be portable, it's better to use "ip CMD" forms.
 
 config BUSYBOX_IPADDR
-	bool "ipaddr (14 kb)"
+	bool "ipaddr (15 kb)"
 	default y
 	select BUSYBOX_FEATURE_IP_ADDRESS
 	help
@@ -590,7 +590,7 @@ config BUSYBOX_IPROUTE
 	Short form of "ip route"
 
 config BUSYBOX_IPTUNNEL
-	bool "iptunnel (9.6 kb)"
+	bool "iptunnel (9.8 kb)"
 	default y
 	select BUSYBOX_FEATURE_IP_TUNNEL
 	help
@@ -604,7 +604,7 @@ config BUSYBOX_IPRULE
 	Short form of "ip rule"
 
 config BUSYBOX_IPNEIGH
-	bool "ipneigh (8.3 kb)"
+	bool "ipneigh (8.6 kb)"
 	default y
 	select BUSYBOX_FEATURE_IP_NEIGH
 	help
@@ -624,6 +624,12 @@ config BUSYBOX_FEATURE_IP_LINK
 	help
 	Configure network devices with "ip".
 
+config BUSYBOX_FEATURE_IP_LINK_CAN
+	bool "ip link set type can"
+	default y
+	help
+	Configure CAN devices with "ip".
+
 config BUSYBOX_FEATURE_IP_ROUTE
 	bool "ip route"
 	default y
@@ -669,7 +675,7 @@ config BUSYBOX_FEATURE_IP_RARE_PROTOCOLS
 	Ethernet, wireless, infrared, ppp/slip, ip tunnelling
 	link types are supported without this option selected.
 config BUSYBOX_IPCALC
-	bool "ipcalc (4.4 kb)"
+	bool "ipcalc (4.6 kb)"
 	default y
 	help
 	ipcalc takes an IP address and netmask and calculates the
@@ -688,14 +694,14 @@ config BUSYBOX_FEATURE_IPCALC_FANCY
 	Adds the options hostname, prefix and silent to the output of
 	"ipcalc".
 config BUSYBOX_FAKEIDENTD
-	bool "fakeidentd (8.7 kb)"
+	bool "fakeidentd (9 kb)"
 	default y
 	select BUSYBOX_FEATURE_SYSLOG
 	help
 	fakeidentd listens on the ident port and returns a predefined
 	fake value on any query.
 config BUSYBOX_NAMEIF
-	bool "nameif (6.6 kb)"
+	bool "nameif (6.9 kb)"
 	default y
 	select BUSYBOX_FEATURE_SYSLOG
 	help
@@ -723,7 +729,7 @@ config BUSYBOX_FEATURE_NAMEIF_EXTENDED
 		new_interface_name  mac=00:80:C8:38:91:B5
 		new_interface_name  00:80:C8:38:91:B5
 config BUSYBOX_NBDCLIENT
-	bool "nbd-client (6 kb)"
+	bool "nbd-client (6.3 kb)"
 	default y
 	help
 	Network block device client
@@ -787,7 +793,7 @@ config BUSYBOX_FEATURE_NETSTAT_PRG
 	Add support for -p flag to print out PID and program name.
 	+700 bytes of code.
 config BUSYBOX_NSLOOKUP
-	bool "nslookup (9.7 kb)"
+	bool "nslookup (10 kb)"
 	default y
 	help
 	nslookup is a tool to query Internet name servers.
@@ -802,7 +808,7 @@ config BUSYBOX_FEATURE_NSLOOKUP_LONG_OPTIONS
 	default y
 	depends on BUSYBOX_FEATURE_NSLOOKUP_BIG && BUSYBOX_LONG_OPTS
 config BUSYBOX_NTPD
-	bool "ntpd (22 kb)"
+	bool "ntpd (23 kb)"
 	default y
 	help
 	The NTP client/server daemon.
@@ -850,22 +856,22 @@ config BUSYBOX_FEATURE_FANCY_PING
 	or terminate with SIGALRM in 5 seconds otherwise.
 	No command-line options will be recognized.
 config BUSYBOX_PSCAN
-	bool "pscan (6 kb)"
+	bool "pscan (6.2 kb)"
 	default y
 	help
 	Simple network port scanner.
 config BUSYBOX_ROUTE
-	bool "route (8.7 kb)"
+	bool "route (9 kb)"
 	default y
 	help
 	Route displays or manipulates the kernel's IP routing tables.
 config BUSYBOX_SLATTACH
-	bool "slattach (6.2 kb)"
+	bool "slattach (6.3 kb)"
 	default y
 	help
 	slattach configures serial line as SLIP network interface.
 config BUSYBOX_SSL_CLIENT
-	bool "ssl_client (25 kb)"
+	bool "ssl_client (28 kb)"
 	default y
 	select BUSYBOX_TLS
 	help
@@ -924,7 +930,7 @@ config BUSYBOX_FEATURE_TELNET_WIDTH
 	default y
 	depends on BUSYBOX_TELNET
 config BUSYBOX_TELNETD
-	bool "telnetd (12 kb)"
+	bool "telnetd (13 kb)"
 	default y
 	select BUSYBOX_FEATURE_SYSLOG
 	help
@@ -1071,7 +1077,7 @@ config BUSYBOX_TRACEROUTE
 	Utility to trace the route of IP packets.
 
 config BUSYBOX_TRACEROUTE6
-	bool "traceroute6 (13 kb)"
+	bool "traceroute6 (12 kb)"
 	default y
 	depends on BUSYBOX_FEATURE_IPV6
 	help
@@ -1090,7 +1096,7 @@ config BUSYBOX_FEATURE_TRACEROUTE_USE_ICMP
 	default y
 	depends on BUSYBOX_TRACEROUTE || BUSYBOX_TRACEROUTE6
 config BUSYBOX_TUNCTL
-	bool "tunctl (6.2 kb)"
+	bool "tunctl (6.4 kb)"
 	default y
 	help
 	tunctl creates or deletes tun devices.
@@ -1103,12 +1109,12 @@ config BUSYBOX_FEATURE_TUNCTL_UG
 	Allow to specify owner and group of newly created interface.
 	340 bytes of pure bloat. Say no here.
 config BUSYBOX_VCONFIG
-	bool "vconfig (2.3 kb)"
+	bool "vconfig (2.6 kb)"
 	default y
 	help
 	Creates, removes, and configures VLAN interfaces
 config BUSYBOX_WGET
-	bool "wget (38 kb)"
+	bool "wget (41 kb)"
 	default y
 	help
 	wget is a utility for non-interactive download of files from HTTP
@@ -1228,12 +1234,12 @@ config BUSYBOX_FEATURE_WGET_OPENSSL
 	By default TLS verification is performed, unless
 	--no-check-certificate option is passed.
 config BUSYBOX_WHOIS
-	bool "whois (6.3 kb)"
+	bool "whois (6.5 kb)"
 	default y
 	help
 	whois is a client for the whois directory service
 config BUSYBOX_ZCIP
-	bool "zcip (8.4 kb)"
+	bool "zcip (8.7 kb)"
 	default y
 	select BUSYBOX_FEATURE_SYSLOG
 	help
diff --git a/config/busybox/networking/udhcp/Config.in b/config/busybox/networking/udhcp/Config.in
index adb5ac16c..1f9de8909 100644
--- a/config/busybox/networking/udhcp/Config.in
+++ b/config/busybox/networking/udhcp/Config.in
@@ -11,6 +11,13 @@ config BUSYBOX_UDHCPD
 	udhcpd is a DHCP server geared primarily toward embedded systems,
 	while striving to be fully functional and RFC compliant.
 
+config BUSYBOX_FEATURE_UDHCPD_BOOTP
+	bool "Answer to BOOTP requests as well"
+	default y
+	depends on BUSYBOX_UDHCPD
+	help
+	Support old BOOTP protocol too.
+
 config BUSYBOX_FEATURE_UDHCPD_BASE_IP_ON_MAC
 	bool "Select IP address based on client MAC"
 	default n
@@ -44,7 +51,7 @@ config BUSYBOX_DHCPD_LEASES_FILE
 	of the file. Normally it is safe to leave it untouched.
 
 config BUSYBOX_DUMPLEASES
-	bool "dumpleases (5.1 kb)"
+	bool "dumpleases (5.3 kb)"
 	default y
 	help
 	dumpleases displays the leases written out by the udhcpd.
@@ -52,7 +59,7 @@ config BUSYBOX_DUMPLEASES
 	by the absolute time that it expires in seconds from epoch.
 
 config BUSYBOX_DHCPRELAY
-	bool "dhcprelay (5.2 kb)"
+	bool "dhcprelay (5.5 kb)"
 	default y
 	help
 	dhcprelay listens for DHCP requests on one or more interfaces
diff --git a/config/busybox/printutils/Config.in b/config/busybox/printutils/Config.in
index 2f3d8a680..7da10e93c 100644
--- a/config/busybox/printutils/Config.in
+++ b/config/busybox/printutils/Config.in
@@ -7,18 +7,18 @@
 menu "Print Utilities"
 
 config BUSYBOX_LPD
-	bool "lpd (5.5 kb)"
+	bool "lpd (5.7 kb)"
 	default y
 	help
 	lpd is a print spooling daemon.
 config BUSYBOX_LPR
-	bool "lpr (9.9 kb)"
+	bool "lpr (10 kb)"
 	default y
 	help
 	lpr sends files (or standard input) to a print spooling daemon.
 
 config BUSYBOX_LPQ
-	bool "lpq (9.9 kb)"
+	bool "lpq (10 kb)"
 	default y
 	help
 	lpq is a print spool queue examination and manipulation program.
diff --git a/config/busybox/procps/Config.in b/config/busybox/procps/Config.in
index 0c1733b9f..9af81b44e 100644
--- a/config/busybox/procps/Config.in
+++ b/config/busybox/procps/Config.in
@@ -22,26 +22,26 @@ config BUSYBOX_FEATURE_SHOW_THREADS
 	and 'h' command in top.
 
 config BUSYBOX_FREE
-	bool "free (3.1 kb)"
+	bool "free (3.8 kb)"
 	default y
 	help
 	free displays the total amount of free and used physical and swap
 	memory in the system, as well as the buffers used by the kernel.
 	The shared memory column should be ignored; it is obsolete.
 config BUSYBOX_FUSER
-	bool "fuser (7 kb)"
+	bool "fuser (7.3 kb)"
 	default y
 	help
 	fuser lists all PIDs (Process IDs) that currently have a given
 	file open. fuser can also list all PIDs that have a given network
 	(TCP or UDP) port open.
 config BUSYBOX_IOSTAT
-	bool "iostat (7.6 kb)"
+	bool "iostat (8 kb)"
 	default y
 	help
 	Report CPU and I/O statistics
 config BUSYBOX_KILL
-	bool "kill (3.1 kb)"
+	bool "kill (3.4 kb)"
 	default y
 	help
 	The command kill sends the specified signal to the specified
@@ -49,7 +49,7 @@ config BUSYBOX_KILL
 	signal is sent.
 
 config BUSYBOX_KILLALL
-	bool "killall (5.6 kb)"
+	bool "killall (5.9 kb)"
 	default y
 	help
 	killall sends a signal to all processes running any of the
@@ -57,7 +57,7 @@ config BUSYBOX_KILLALL
 	sent.
 
 config BUSYBOX_KILLALL5
-	bool "killall5 (5.3 kb)"
+	bool "killall5 (5.6 kb)"
 	default y
 	help
 	The SystemV killall command. killall5 sends a signal
@@ -65,34 +65,34 @@ config BUSYBOX_KILLALL5
 	in its own session, so it won't kill the shell that is running
 	the script it was called from.
 config BUSYBOX_LSOF
-	bool "lsof (3.4 kb)"
+	bool "lsof (3.7 kb)"
 	default y
 	help
 	Show open files in the format of:
 	PID <TAB> /path/to/executable <TAB> /path/to/opened/file
 config BUSYBOX_MPSTAT
-	bool "mpstat (9.8 kb)"
+	bool "mpstat (10 kb)"
 	default y
 	help
 	Per-processor statistics
 config BUSYBOX_NMETER
-	bool "nmeter (11 kb)"
+	bool "nmeter (12 kb)"
 	default y
 	help
 	Prints selected system stats continuously, one line per update.
 config BUSYBOX_PGREP
-	bool "pgrep (6.5 kb)"
+	bool "pgrep (6.8 kb)"
 	default y
 	help
 	Look for processes by name.
 
 config BUSYBOX_PKILL
-	bool "pkill (7.5 kb)"
+	bool "pkill (7.8 kb)"
 	default y
 	help
 	Send signals to processes by name.
 config BUSYBOX_PIDOF
-	bool "pidof (6.3 kb)"
+	bool "pidof (6.5 kb)"
 	default y
 	help
 	Pidof finds the process id's (pids) of the named programs. It prints
@@ -114,12 +114,12 @@ config BUSYBOX_FEATURE_PIDOF_OMIT
 	The special pid %PPID can be used to name the parent process
 	of the pidof, in other words the calling shell or shell script.
 config BUSYBOX_PMAP
-	bool "pmap (6 kb)"
+	bool "pmap (6.2 kb)"
 	default y
 	help
 	Display processes' memory mappings.
 config BUSYBOX_POWERTOP
-	bool "powertop (9.6 kb)"
+	bool "powertop (9.9 kb)"
 	default y
 	help
 	Analyze power consumption on Intel-based laptops
@@ -132,7 +132,7 @@ config BUSYBOX_FEATURE_POWERTOP_INTERACTIVE
 	Without this, powertop will only refresh display every 10 seconds.
 	No keyboard commands will work, only ^C to terminate.
 config BUSYBOX_PS
-	bool "ps (11 kb)"
+	bool "ps (12 kb)"
 	default y
 	help
 	ps gives a snapshot of the current processes.
@@ -172,23 +172,23 @@ config BUSYBOX_FEATURE_PS_ADDITIONAL_COLUMNS
 	default y
 	depends on (BUSYBOX_PS || BUSYBOX_MINIPS) && BUSYBOX_DESKTOP
 config BUSYBOX_PSTREE
-	bool "pstree (9.3 kb)"
+	bool "pstree (9.4 kb)"
 	default y
 	help
 	Display a tree of processes.
 config BUSYBOX_PWDX
-	bool "pwdx (3.7 kb)"
+	bool "pwdx (3.9 kb)"
 	default y
 	help
 	Report current working directory of a process
 config BUSYBOX_SMEMCAP
-	bool "smemcap (2.5 kb)"
+	bool "smemcap (3 kb)"
 	default y
 	help
 	smemcap is a tool for capturing process data for smem,
 	a memory usage statistic tool.
 config BUSYBOX_BB_SYSCTL
-	bool "sysctl (7.4 kb)"
+	bool "sysctl (7.9 kb)"
 	default y
 	help
 	Configure kernel parameters at runtime.
@@ -254,7 +254,7 @@ config BUSYBOX_FEATURE_TOPMEM
 	help
 	Enable 's' in top (gives lots of memory info).
 config BUSYBOX_UPTIME
-	bool "uptime (3.7 kb)"
+	bool "uptime (4 kb)"
 	default y
 	help
 	uptime gives a one line display of the current time, how long
@@ -268,7 +268,7 @@ config BUSYBOX_FEATURE_UPTIME_UTMP_SUPPORT
 	help
 	Display the number of users currently logged on.
 config BUSYBOX_WATCH
-	bool "watch (4.4 kb)"
+	bool "watch (5.2 kb)"
 	default y
 	help
 	watch is used to execute a program periodically, showing
diff --git a/config/busybox/runit/Config.in b/config/busybox/runit/Config.in
index ac1a248ac..144787952 100644
--- a/config/busybox/runit/Config.in
+++ b/config/busybox/runit/Config.in
@@ -7,44 +7,44 @@
 menu "Runit Utilities"
 
 config BUSYBOX_CHPST
-	bool "chpst (9 kb)"
+	bool "chpst (9.2 kb)"
 	default y
 	help
 	chpst changes the process state according to the given options, and
 	execs specified program.
 
 config BUSYBOX_SETUIDGID
-	bool "setuidgid (4 kb)"
+	bool "setuidgid (4.2 kb)"
 	default y
 	help
 	Sets soft resource limits as specified by options
 
 config BUSYBOX_ENVUIDGID
-	bool "envuidgid (3.9 kb)"
+	bool "envuidgid (4.1 kb)"
 	default y
 	help
 	Sets $UID to account's uid and $GID to account's gid
 
 config BUSYBOX_ENVDIR
-	bool "envdir (2.5 kb)"
+	bool "envdir (2.9 kb)"
 	default y
 	help
 	Sets various environment variables as specified by files
 	in the given directory
 
 config BUSYBOX_SOFTLIMIT
-	bool "softlimit (4.5 kb)"
+	bool "softlimit (4.7 kb)"
 	default y
 	help
 	Sets soft resource limits as specified by options
 config BUSYBOX_RUNSV
-	bool "runsv (7.8 kb)"
+	bool "runsv (8.2 kb)"
 	default y
 	help
 	runsv starts and monitors a service and optionally an appendant log
 	service.
 config BUSYBOX_RUNSVDIR
-	bool "runsvdir (6.3 kb)"
+	bool "runsvdir (6.6 kb)"
 	default y
 	help
 	runsvdir starts a runsv process for each subdirectory, or symlink to
@@ -60,7 +60,7 @@ config BUSYBOX_FEATURE_RUNSVDIR_LOG
 	message (viewable via top/ps). Otherwise (feature is off
 	or no parameter), error messages go to stderr only.
 config BUSYBOX_SV
-	bool "sv (8.5 kb)"
+	bool "sv (8.7 kb)"
 	default y
 	help
 	sv reports the current status and controls the state of services
@@ -75,14 +75,14 @@ config BUSYBOX_SV_DEFAULT_SERVICE_DIR
 	Defaults to "/var/service"
 
 config BUSYBOX_SVC
-	bool "svc (8.4 kb)"
+	bool "svc (8.7 kb)"
 	default y
 	help
 	svc controls the state of services monitored by the runsv supervisor.
 	It is compatible with daemontools command with the same name.
 
 config BUSYBOX_SVOK
-	bool "svok (1.5 kb)"
+	bool "svok (1.8 kb)"
 	default y
 	help
 	svok checks whether runsv supervisor is running.
diff --git a/config/busybox/shell/Config.in b/config/busybox/shell/Config.in
index cb6215afc..2b920033d 100644
--- a/config/busybox/shell/Config.in
+++ b/config/busybox/shell/Config.in
@@ -87,7 +87,7 @@ config BUSYBOX_SHELL_ASH
 	depends on !BUSYBOX_NOMMU
 
 config BUSYBOX_ASH
-	bool "ash (78 kb)"
+	bool "ash (80 kb)"
 	default y
 	depends on !BUSYBOX_NOMMU
 	select BUSYBOX_SHELL_ASH
@@ -201,11 +201,6 @@ config BUSYBOX_ASH_TEST
 	default y
 	depends on BUSYBOX_SHELL_ASH
 
-config BUSYBOX_ASH_SLEEP
-	bool "sleep builtin"
-	default y
-	depends on BUSYBOX_SHELL_ASH
-
 config BUSYBOX_ASH_HELP
 	bool "help builtin"
 	default y
@@ -227,7 +222,7 @@ config BUSYBOX_ASH_CMDCMD
 
 endif # ash options
 config BUSYBOX_CTTYHACK
-	bool "cttyhack (2.4 kb)"
+	bool "cttyhack (2.7 kb)"
 	default y
 	help
 	One common problem reported on the mailing list is the "can't
@@ -270,7 +265,7 @@ config BUSYBOX_CTTYHACK
 
 	# getty 115200 $(cttyhack)
 config BUSYBOX_HUSH
-	bool "hush (68 kb)"
+	bool "hush (70 kb)"
 	default y
 	select BUSYBOX_SHELL_HUSH
 	help
diff --git a/config/busybox/sysklogd/Config.in b/config/busybox/sysklogd/Config.in
index 0d8b63557..fa5b98175 100644
--- a/config/busybox/sysklogd/Config.in
+++ b/config/busybox/sysklogd/Config.in
@@ -7,7 +7,7 @@
 menu "System Logging Utilities"
 
 config BUSYBOX_KLOGD
-	bool "klogd (5.7 kb)"
+	bool "klogd (6.2 kb)"
 	default y
 	help
 	klogd is a utility which intercepts and logs all
@@ -35,7 +35,7 @@ config BUSYBOX_FEATURE_KLOGD_KLOGCTL
 
 	If in doubt, say 'Y'.
 config BUSYBOX_LOGGER
-	bool "logger (6.3 kb)"
+	bool "logger (6.5 kb)"
 	default y
 	select BUSYBOX_FEATURE_SYSLOG
 	help
@@ -44,7 +44,7 @@ config BUSYBOX_LOGGER
 	they can be logged. This is generally used to help locate
 	problems that occur within programs and scripts.
 config BUSYBOX_LOGREAD
-	bool "logread (4.8 kb)"
+	bool "logread (5 kb)"
 	default y
 	help
 	If you enabled Circular Buffer support, you almost
@@ -64,7 +64,7 @@ config BUSYBOX_FEATURE_LOGREAD_REDUCED_LOCKING
 	contention at some minor memory expense.
 
 config BUSYBOX_SYSLOGD
-	bool "syslogd (13 kb)"
+	bool "syslogd (14 kb)"
 	default y
 	help
 	The syslogd utility is used to record logs of all the
diff --git a/config/busybox/util-linux/Config.in b/config/busybox/util-linux/Config.in
index e0adb9ea0..8008c5c0d 100644
--- a/config/busybox/util-linux/Config.in
+++ b/config/busybox/util-linux/Config.in
@@ -7,7 +7,7 @@
 menu "Linux System Utilities"
 
 config BUSYBOX_ACPID
-	bool "acpid (9 kb)"
+	bool "acpid (9.3 kb)"
 	default y
 	help
 	acpid listens to ACPI events coming either in textual form from
@@ -28,7 +28,7 @@ config BUSYBOX_FEATURE_ACPID_COMPAT
 	help
 	Accept and ignore compatibility options -g -m -s -S -v.
 config BUSYBOX_BLKDISCARD
-	bool "blkdiscard (4.3 kb)"
+	bool "blkdiscard (4.6 kb)"
 	default y
 	help
 	blkdiscard discards sectors on a given device.
@@ -46,23 +46,23 @@ config BUSYBOX_FEATURE_BLKID_TYPE
 	help
 	Show TYPE="filesystem type"
 config BUSYBOX_BLOCKDEV
-	bool "blockdev (2.3 kb)"
+	bool "blockdev (2.6 kb)"
 	default y
 	help
 	Performs some ioctls with block devices.
 config BUSYBOX_CAL
-	bool "cal (5.8 kb)"
+	bool "cal (6.1 kb)"
 	default y
 	help
 	cal is used to display a monthly calendar.
 config BUSYBOX_CHRT
-	bool "chrt (4.7 kb)"
+	bool "chrt (5.1 kb)"
 	default y
 	help
 	Manipulate real-time attributes of a process.
 	This requires sched_{g,s}etparam support in your libc.
 config BUSYBOX_DMESG
-	bool "dmesg (3.7 kb)"
+	bool "dmesg (3.9 kb)"
 	default y
 	help
 	dmesg is used to examine or control the kernel ring buffer. When the
@@ -94,7 +94,7 @@ config BUSYBOX_FEATURE_DMESG_PRETTY
 		<6>BIOS-provided physical RAM map:
 		<6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 config BUSYBOX_EJECT
-	bool "eject (4 kb)"
+	bool "eject (4.3 kb)"
 	default y
 	help
 	Used to eject cdroms. (defaults to /dev/cdrom)
@@ -107,17 +107,17 @@ config BUSYBOX_FEATURE_EJECT_SCSI
 	Add the -s option to eject, this allows to eject SCSI-Devices and
 	usb-storage devices.
 config BUSYBOX_FALLOCATE
-	bool "fallocate (4.1 kb)"
+	bool "fallocate (4.3 kb)"
 	default y
 	help
 	Preallocate space for files.
 config BUSYBOX_FATATTR
-	bool "fatattr (1.9 kb)"
+	bool "fatattr (2.2 kb)"
 	default y
 	help
 	fatattr lists or changes the file attributes on a fat file system.
 config BUSYBOX_FBSET
-	bool "fbset (5.9 kb)"
+	bool "fbset (6.2 kb)"
 	default y
 	help
 	fbset is used to show or change the settings of a Linux frame buffer
@@ -144,12 +144,12 @@ config BUSYBOX_FEATURE_FBSET_READMODE
 	default as /etc/fb.modes, which can be used to set frame buffer
 	device to pre-defined video modes.
 config BUSYBOX_FDFORMAT
-	bool "fdformat (4.4 kb)"
+	bool "fdformat (4.7 kb)"
 	default y
 	help
 	fdformat is used to low-level format a floppy disk.
 config BUSYBOX_FDISK
-	bool "fdisk (37 kb)"
+	bool "fdisk (31 kb)"
 	default y
 	help
 	The fdisk utility is used to divide hard disks into one or more
@@ -222,18 +222,18 @@ config BUSYBOX_FEATURE_FDISK_ADVANCED
 	partition, and similarly evil things. Unless you have a very good
 	reason you would be wise to leave this disabled.
 config BUSYBOX_FINDFS
-	bool "findfs (12 kb)"
+	bool "findfs (11 kb)"
 	default y
 	select BUSYBOX_VOLUMEID
 	help
 	Prints the name of a filesystem with given label or UUID.
 config BUSYBOX_FLOCK
-	bool "flock (6.3 kb)"
+	bool "flock (6.5 kb)"
 	default y
 	help
 	Manage locks from shell scripts
 config BUSYBOX_FDFLUSH
-	bool "fdflush (1.3 kb)"
+	bool "fdflush (1.6 kb)"
 	default y
 	help
 	fdflush is only needed when changing media on slightly-broken
@@ -245,7 +245,7 @@ config BUSYBOX_FDFLUSH
 	leave this disabled.
 
 config BUSYBOX_FREERAMDISK
-	bool "freeramdisk (1.3 kb)"
+	bool "freeramdisk (1.6 kb)"
 	default y
 	help
 	Linux allows you to create ramdisks. This utility allows you to
@@ -265,18 +265,18 @@ config BUSYBOX_FSCK_MINIX
 	check for and attempt to repair any corruption that occurs to a minix
 	filesystem.
 config BUSYBOX_FSFREEZE
-	bool "fsfreeze (3.5 kb)"
+	bool "fsfreeze (3.7 kb)"
 	default y
 	select BUSYBOX_LONG_OPTS
 	help
 	Halt new accesses and flush writes on a mounted filesystem.
 config BUSYBOX_FSTRIM
-	bool "fstrim (4.4 kb)"
+	bool "fstrim (4.6 kb)"
 	default y
 	help
 	Discard unused blocks on a mounted filesystem.
 config BUSYBOX_GETOPT
-	bool "getopt (5.8 kb)"
+	bool "getopt (6 kb)"
 	default y
 	help
 	The getopt utility is used to break up (parse) options in command
@@ -293,26 +293,27 @@ config BUSYBOX_FEATURE_GETOPT_LONG
 	help
 	Enable support for long options (option -l).
 config BUSYBOX_HEXDUMP
-	bool "hexdump (8.6 kb)"
+	bool "hexdump (8.7 kb)"
 	default y
 	help
 	The hexdump utility is used to display binary data in a readable
 	way that is comparable to the output from most hex editors.
 
 config BUSYBOX_HD
-	bool "hd (7.8 kb)"
+	bool "hd (8.3 kb)"
 	default y
 	help
 	hd is an alias to hexdump -C.
 config BUSYBOX_XXD
-	bool "xxd (8.9 kb)"
+	bool "xxd (11 kb)"
 	default y
 	help
 	The xxd utility is used to display binary data in a readable
 	way that is comparable to the output from most hex editors.
 config BUSYBOX_HWCLOCK
-	bool "hwclock (5.8 kb)"
+	bool "hwclock (5.9 kb)"
 	default y
+	select BUSYBOX_LONG_OPTS
 	help
 	The hwclock utility is used to read and set the hardware clock
 	on a system. This is primarily used to set the current time on
@@ -331,26 +332,26 @@ config BUSYBOX_FEATURE_HWCLOCK_ADJTIME_FHS
 
 	pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
 config BUSYBOX_IONICE
-	bool "ionice (3.8 kb)"
+	bool "ionice (4 kb)"
 	default y
 	help
 	Set/set program io scheduling class and priority
 	Requires kernel >= 2.6.13
 config BUSYBOX_IPCRM
-	bool "ipcrm (3.2 kb)"
+	bool "ipcrm (3.5 kb)"
 	default y
 	help
 	The ipcrm utility allows the removal of System V interprocess
 	communication (IPC) objects and the associated data structures
 	from the system.
 config BUSYBOX_IPCS
-	bool "ipcs (11 kb)"
+	bool "ipcs (12 kb)"
 	default y
 	help
 	The ipcs utility is used to provide information on the currently
 	allocated System V interprocess (IPC) objects in the system.
 config BUSYBOX_LAST
-	bool "last (6.1 kb)"
+	bool "last (7.4 kb)"
 	default y
 	depends on BUSYBOX_FEATURE_WTMP
 	help
@@ -364,14 +365,14 @@ config BUSYBOX_FEATURE_LAST_FANCY
 	'last' displays detailed information about the last users that
 	logged into the system (mimics sysvinit last). +900 bytes.
 config BUSYBOX_LOSETUP
-	bool "losetup (5.5 kb)"
+	bool "losetup (6.2 kb)"
 	default y
 	help
 	losetup is used to associate or detach a loop device with a regular
 	file or block device, and to query the status of a loop device. This
 	version does not currently support enabling data encryption.
 config BUSYBOX_LSPCI
-	bool "lspci (6.3 kb)"
+	bool "lspci (6.4 kb)"
 	default y
 	help
 	lspci is a utility for displaying information about PCI buses in the
@@ -379,7 +380,7 @@ config BUSYBOX_LSPCI
 
 	This version uses sysfs (/sys/bus/pci/devices) only.
 config BUSYBOX_LSUSB
-	bool "lsusb (4.2 kb)"
+	bool "lsusb (4.4 kb)"
 	default y
 	help
 	lsusb is a utility for displaying information about USB buses in the
@@ -387,7 +388,7 @@ config BUSYBOX_LSUSB
 
 	This version uses sysfs (/sys/bus/usb/devices) only.
 config BUSYBOX_MDEV
-	bool "mdev (17 kb)"
+	bool "mdev (20 kb)"
 	default y
 	help
 	mdev is a mini-udev implementation for dynamically creating device
@@ -454,7 +455,7 @@ config BUSYBOX_FEATURE_MDEV_DAEMON
 	resources than registering mdev as hotplug helper or using the
 	uevent applet.
 config BUSYBOX_MESG
-	bool "mesg (1.4 kb)"
+	bool "mesg (1.8 kb)"
 	default y
 	help
 	Mesg controls access to your terminal by others. It is typically
@@ -505,18 +506,18 @@ config BUSYBOX_MKFS_REISER
 	Utility to create ReiserFS filesystems.
 	Note: this applet needs a lot of testing and polishing.
 config BUSYBOX_MKDOSFS
-	bool "mkdosfs (7.2 kb)"
+	bool "mkdosfs (7.6 kb)"
 	default y
 	help
 	Utility to create FAT32 filesystems.
 
 config BUSYBOX_MKFS_VFAT
-	bool "mkfs.vfat (7.2 kb)"
+	bool "mkfs.vfat (7.6 kb)"
 	default y
 	help
 	Alias to "mkdosfs".
 config BUSYBOX_MKSWAP
-	bool "mkswap (6.3 kb)"
+	bool "mkswap (6.6 kb)"
 	default y
 	help
 	The mkswap utility is used to configure a file or disk partition as
@@ -535,7 +536,7 @@ config BUSYBOX_FEATURE_MKSWAP_UUID
 	help
 	Generate swap spaces with universally unique identifiers.
 config BUSYBOX_MORE
-	bool "more (7 kb)"
+	bool "more (7.2 kb)"
 	default y
 	help
 	more is a simple utility which allows you to read text one screen
@@ -544,7 +545,7 @@ config BUSYBOX_MORE
 	you will probably find this utility very helpful. If you don't have
 	any need to reading text files, you can leave this disabled.
 config BUSYBOX_MOUNT
-	bool "mount (23 kb)"
+	bool "mount (24 kb)"
 	default y
 	help
 	All files and filesystems in Unix are arranged into one big directory
@@ -634,7 +635,7 @@ config BUSYBOX_FEATURE_MOUNT_OTHERTAB
 	help
 	Support mount -T (specifying an alternate fstab)
 config BUSYBOX_MOUNTPOINT
-	bool "mountpoint (4.9 kb)"
+	bool "mountpoint (5.1 kb)"
 	default y
 	help
 	mountpoint checks if the directory is a mountpoint.
@@ -659,12 +660,12 @@ config BUSYBOX_NOLOGIN_DEPENDENCIES
 	If you know these will be available externally you can
 	disable this option.
 config BUSYBOX_NSENTER
-	bool "nsenter (6.5 kb)"
+	bool "nsenter (6.8 kb)"
 	default y
 	help
 	Run program with namespaces of other processes.
 config BUSYBOX_PIVOT_ROOT
-	bool "pivot_root (1.1 kb)"
+	bool "pivot_root (1.4 kb)"
 	default y
 	help
 	The pivot_root utility swaps the mount points for the root filesystem
@@ -675,7 +676,7 @@ config BUSYBOX_PIVOT_ROOT
 	Note: This is for initrd in linux 2.4. Under initramfs (introduced
 	in linux 2.6) use switch_root instead.
 config BUSYBOX_RDATE
-	bool "rdate (5.6 kb)"
+	bool "rdate (5.9 kb)"
 	default y
 	help
 	The rdate utility allows you to synchronize the date and time of your
@@ -683,44 +684,44 @@ config BUSYBOX_RDATE
 	the RFC868 protocol, which is built into the inetd daemon on most
 	systems.
 config BUSYBOX_RDEV
-	bool "rdev (1.8 kb)"
+	bool "rdev (2.1 kb)"
 	default y
 	help
 	Print the device node associated with the filesystem mounted at '/'.
 config BUSYBOX_READPROFILE
-	bool "readprofile (7.1 kb)"
+	bool "readprofile (7.5 kb)"
 	default y
 	help
 	This allows you to parse /proc/profile for basic profiling.
 config BUSYBOX_RENICE
-	bool "renice (4.2 kb)"
+	bool "renice (4.4 kb)"
 	default y
 	help
 	Renice alters the scheduling priority of one or more running
 	processes.
 config BUSYBOX_REV
-	bool "rev (4.4 kb)"
+	bool "rev (4.6 kb)"
 	default y
 	help
 	Reverse lines of a file or files.
 config BUSYBOX_RTCWAKE
-	bool "rtcwake (6.8 kb)"
+	bool "rtcwake (7.5 kb)"
 	default y
 	help
 	Enter a system sleep state until specified wakeup time.
 config BUSYBOX_SCRIPT
-	bool "script (8.6 kb)"
+	bool "script (8.8 kb)"
 	default y
 	help
 	The script makes typescript of terminal session.
 config BUSYBOX_SCRIPTREPLAY
-	bool "scriptreplay (2.4 kb)"
+	bool "scriptreplay (2.6 kb)"
 	default y
 	help
 	This program replays a typescript, using timing information
 	given by script -t.
 config BUSYBOX_SETARCH
-	bool "setarch (3.6 kb)"
+	bool "setarch (3.8 kb)"
 	default y
 	help
 	The linux32 utility is used to create a 32bit environment for the
@@ -729,18 +730,18 @@ config BUSYBOX_SETARCH
 	(like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
 
 config BUSYBOX_LINUX32
-	bool "linux32 (3.3 kb)"
+	bool "linux32 (3.6 kb)"
 	default y
 	help
 	Alias to "setarch linux32".
 
 config BUSYBOX_LINUX64
-	bool "linux64 (3.3 kb)"
+	bool "linux64 (3.5 kb)"
 	default y
 	help
 	Alias to "setarch linux64".
 config BUSYBOX_SETPRIV
-	bool "setpriv (6.6 kb)"
+	bool "setpriv (6.9 kb)"
 	default y
 	select BUSYBOX_LONG_OPTS
 	help
@@ -775,7 +776,7 @@ config BUSYBOX_FEATURE_SETPRIV_CAPABILITY_NAMES
 	this option allows using the human-readable names in addition to
 	the index-based names.
 config BUSYBOX_SETSID
-	bool "setsid (3.6 kb)"
+	bool "setsid (3.8 kb)"
 	default y
 	help
 	setsid runs a program in a new session
@@ -818,7 +819,7 @@ config BUSYBOX_FEATURE_SWAPONOFF_LABEL
 	This allows for specifying a device by label or uuid, rather than by
 	name. This feature utilizes the same functionality as blkid/findfs.
 config BUSYBOX_SWITCH_ROOT
-	bool "switch_root (5.5 kb)"
+	bool "switch_root (5.7 kb)"
 	default y
 	help
 	The switch_root utility is used from initramfs to select a new
@@ -837,7 +838,7 @@ config BUSYBOX_SWITCH_ROOT
 	list of active mount points. That's why.
 
 config BUSYBOX_TASKSET
-	bool "taskset (4.2 kb)"
+	bool "taskset (5.6 kb)"
 	default y
 	help
 	Retrieve or set a processes's CPU affinity.
@@ -860,7 +861,7 @@ config BUSYBOX_FEATURE_TASKSET_CPULIST
 	Add support for taking/printing affinity as CPU list when '-c'
 	option is used. For example, it prints '0-3,7' instead of mask '8f'.
 config BUSYBOX_UEVENT
-	bool "uevent (3.1 kb)"
+	bool "uevent (3.5 kb)"
 	default y
 	help
 	uevent is a netlink listener for kernel uevent notifications
@@ -881,14 +882,14 @@ config BUSYBOX_FEATURE_UMOUNT_ALL
 	help
 	Support -a option to unmount all currently mounted filesystems.
 config BUSYBOX_UNSHARE
-	bool "unshare (7.2 kb)"
+	bool "unshare (7.3 kb)"
 	default y
 	depends on !BUSYBOX_NOMMU
 	select BUSYBOX_LONG_OPTS
 	help
 	Run program with some namespaces unshared from parent.
 config BUSYBOX_WALL
-	bool "wall (2.6 kb)"
+	bool "wall (2.9 kb)"
 	default y
 	depends on BUSYBOX_FEATURE_UTMP
 	help
diff --git a/patches/busybox-1.36.1/0200-reactivate-check-for-tty.patch b/patches/busybox-1.37.0/0200-reactivate-check-for-tty.patch
similarity index 100%
rename from patches/busybox-1.36.1/0200-reactivate-check-for-tty.patch
rename to patches/busybox-1.37.0/0200-reactivate-check-for-tty.patch
diff --git a/patches/busybox-1.36.1/0201-build-system-only-pass-real-libs-to-SELINUX_LIBS.patch b/patches/busybox-1.37.0/0201-build-system-only-pass-real-libs-to-SELINUX_LIBS.patch
similarity index 100%
rename from patches/busybox-1.36.1/0201-build-system-only-pass-real-libs-to-SELINUX_LIBS.patch
rename to patches/busybox-1.37.0/0201-build-system-only-pass-real-libs-to-SELINUX_LIBS.patch
diff --git a/patches/busybox-1.36.1/0202-scripts-trylink-honour-SKIP_STRIP-and-don-t-strip-if.patch b/patches/busybox-1.37.0/0202-scripts-trylink-honour-SKIP_STRIP-and-don-t-strip-if.patch
similarity index 100%
rename from patches/busybox-1.36.1/0202-scripts-trylink-honour-SKIP_STRIP-and-don-t-strip-if.patch
rename to patches/busybox-1.37.0/0202-scripts-trylink-honour-SKIP_STRIP-and-don-t-strip-if.patch
diff --git a/patches/busybox-1.36.1/0203-tc-Fix-compilation-with-Linux-v6.8-rc1.patch b/patches/busybox-1.37.0/0203-tc-Fix-compilation-with-Linux-v6.8-rc1.patch
similarity index 100%
rename from patches/busybox-1.36.1/0203-tc-Fix-compilation-with-Linux-v6.8-rc1.patch
rename to patches/busybox-1.37.0/0203-tc-Fix-compilation-with-Linux-v6.8-rc1.patch
diff --git a/patches/busybox-1.36.1/series b/patches/busybox-1.37.0/series
similarity index 100%
rename from patches/busybox-1.36.1/series
rename to patches/busybox-1.37.0/series
diff --git a/rules/busybox.make b/rules/busybox.make
index 929f721c7..695c77eac 100644
--- a/rules/busybox.make
+++ b/rules/busybox.make
@@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_BUSYBOX) += busybox
 #
 # Paths and names
 #
-BUSYBOX_VERSION	:= 1.36.1
-BUSYBOX_MD5	:= 0fc591bc9f4e365dfd9ade0014f32561
+BUSYBOX_VERSION	:= 1.37.0
+BUSYBOX_MD5	:= 865b68ab41b923d9cdbebf3f2c8b04ec
 BUSYBOX		:= busybox-$(BUSYBOX_VERSION)
 BUSYBOX_SUFFIX	:= tar.bz2
 BUSYBOX_URL	:= https://www.busybox.net/downloads/$(BUSYBOX).$(BUSYBOX_SUFFIX)
-- 
2.34.1




^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-10-11 10:25 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-09-30 20:01 [ptxdist] [PATCH] busybox: Version bump. 1.36.1 -> 1.37.0 Christian Melki
2024-10-11 10:24 ` [ptxdist] [APPLIED] " Michael Olbrich

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox