* [ptxdist] [PATCH 0/2] Fix a few typos and duplicated words
@ 2024-04-09 7:37 Markus Heidelberg
2024-04-09 7:37 ` [ptxdist] [PATCH 1/2] Fix typos "can/must be uses" -> "used" Markus Heidelberg
2024-04-09 7:37 ` [ptxdist] [PATCH 2/2] Fix duplicated "to to" in texts Markus Heidelberg
0 siblings, 2 replies; 7+ messages in thread
From: Markus Heidelberg @ 2024-04-09 7:37 UTC (permalink / raw)
To: ptxdist; +Cc: Markus Heidelberg
Markus Heidelberg (2):
Fix typos "can/must be uses" -> "used"
Fix duplicated "to to" in texts
doc/multi_image_platforms.inc | 6 +++---
doc/ref_make_variables.rst | 6 +++---
platforms/image_ipkg.in | 2 +-
rules/other/Toplevel.make | 2 +-
4 files changed, 8 insertions(+), 8 deletions(-)
--
2.34.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ptxdist] [PATCH 1/2] Fix typos "can/must be uses" -> "used"
2024-04-09 7:37 [ptxdist] [PATCH 0/2] Fix a few typos and duplicated words Markus Heidelberg
@ 2024-04-09 7:37 ` Markus Heidelberg
2024-04-09 8:45 ` Alexander Dahl
2024-04-11 15:04 ` [ptxdist] [APPLIED] " Michael Olbrich
2024-04-09 7:37 ` [ptxdist] [PATCH 2/2] Fix duplicated "to to" in texts Markus Heidelberg
1 sibling, 2 replies; 7+ messages in thread
From: Markus Heidelberg @ 2024-04-09 7:37 UTC (permalink / raw)
To: ptxdist; +Cc: Markus Heidelberg
Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
---
doc/multi_image_platforms.inc | 6 +++---
doc/ref_make_variables.rst | 6 +++---
rules/other/Toplevel.make | 2 +-
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/doc/multi_image_platforms.inc b/doc/multi_image_platforms.inc
index 2c8838f4e..726a42767 100644
--- a/doc/multi_image_platforms.inc
+++ b/doc/multi_image_platforms.inc
@@ -26,7 +26,7 @@ package rules manually. See :ref:`adding_new_packages` for more details one
how to create a new package.
.. note:: PTXdist looks in ``patches/$(<PKG>)`` for the patches. Symlinks
- can be uses to share the patch stack across multiple bootloader packages.
+ can be used to share the patch stack across multiple bootloader packages.
.. _multi_image_individual_root_filesystems:
@@ -46,7 +46,7 @@ There are two ways to mange the package list for the image:
Manually create the package list by listing package names or using **make**
macros to manipulate the default package list ``$(PTX_PACKAGES_INSTALL)``.
- To add a single custom package, extra packages can be uses. An extra package
+ To add a single custom package, extra packages can be used. An extra package
is not added to ``$(PTX_PACKAGES_INSTALL)``. It is created by modifying the
package rule like this:
@@ -93,7 +93,7 @@ The final steps are highly hardware dependent. In some cases a bootloader
image and a rootfs are all that is needed.
To boot from SD-Card a disk image including bootloader, partition table and
-rootfs is needed. The ``image-genimage`` template can be uses again to
+rootfs is needed. The ``image-genimage`` template can be used again to
create such an image for each variant.
.. note:: The genimage config files in ``config/images/`` are good examples
diff --git a/doc/ref_make_variables.rst b/doc/ref_make_variables.rst
index 31616ac6f..6bba9db5d 100644
--- a/doc/ref_make_variables.rst
+++ b/doc/ref_make_variables.rst
@@ -478,7 +478,7 @@ different.
package then this package should be selected in the menu file.
``<PKG>_PKGS``
- This is another mechanism to add files to the image. It can be uses
+ This is another mechanism to add files to the image. It can be used
instead of or in addition to ``<PKG>_FILES``. It must be set to a list of
ptxdist packages (the lowercase name of the packages). PTXdist will add
the necessary dependencies.
@@ -486,9 +486,9 @@ different.
Note that this will not ensure that the packages are enabled or that all
all package dependencies are satisfied. ``$(PTX_PACKAGES_INSTALL)`` can
be used to specify all enabled packages. Or ``$(call ptx/collection,
- $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be uses to to
+ $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be used to to
specify the packages enabled by this collection. In both cases ``=`` must
- be uses instead of ``:=`` due to the makefile include order.
+ be used instead of ``:=`` due to the makefile include order.
``<PKG>_CONFIG``
``genimage`` packages use this to specify the ``genimage`` configuration
diff --git a/rules/other/Toplevel.make b/rules/other/Toplevel.make
index f1a13d72f..ac2289431 100644
--- a/rules/other/Toplevel.make
+++ b/rules/other/Toplevel.make
@@ -203,7 +203,7 @@ endif
#
# Pattern target to allow printing variable
# $(filter ..) is used to match against all existing variables so patterns
-# containing '%' can be uses to print multiple variables.
+# containing '%' can be used to print multiple variables.
# In verbose mode, '<name>=<value>' is printed.
# Trying to print undefined variables results in an error unless '-k' is
# used. In this case an empty value is printed.
--
2.34.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ptxdist] [PATCH 2/2] Fix duplicated "to to" in texts
2024-04-09 7:37 [ptxdist] [PATCH 0/2] Fix a few typos and duplicated words Markus Heidelberg
2024-04-09 7:37 ` [ptxdist] [PATCH 1/2] Fix typos "can/must be uses" -> "used" Markus Heidelberg
@ 2024-04-09 7:37 ` Markus Heidelberg
2024-04-09 8:42 ` Alexander Dahl
2024-04-11 15:04 ` [ptxdist] [APPLIED] " Michael Olbrich
1 sibling, 2 replies; 7+ messages in thread
From: Markus Heidelberg @ 2024-04-09 7:37 UTC (permalink / raw)
To: ptxdist; +Cc: Markus Heidelberg
Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
---
doc/ref_make_variables.rst | 2 +-
platforms/image_ipkg.in | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/doc/ref_make_variables.rst b/doc/ref_make_variables.rst
index 6bba9db5d..775ff71be 100644
--- a/doc/ref_make_variables.rst
+++ b/doc/ref_make_variables.rst
@@ -486,7 +486,7 @@ different.
Note that this will not ensure that the packages are enabled or that all
all package dependencies are satisfied. ``$(PTX_PACKAGES_INSTALL)`` can
be used to specify all enabled packages. Or ``$(call ptx/collection,
- $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be used to to
+ $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be used to
specify the packages enabled by this collection. In both cases ``=`` must
be used instead of ``:=`` due to the makefile include order.
diff --git a/platforms/image_ipkg.in b/platforms/image_ipkg.in
index 106a3cb77..11ddaa9d1 100644
--- a/platforms/image_ipkg.in
+++ b/platforms/image_ipkg.in
@@ -30,7 +30,7 @@ menuconfig IMAGE_IPKG_SIGN_OPENSSL
select HOST_OPENSSL
prompt "sign ipkg-repository with openssl"
help
- Use openssl to to sign the Packages file in the package
+ Use openssl to sign the Packages file in the package
repository.
--
2.34.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ptxdist] [PATCH 2/2] Fix duplicated "to to" in texts
2024-04-09 7:37 ` [ptxdist] [PATCH 2/2] Fix duplicated "to to" in texts Markus Heidelberg
@ 2024-04-09 8:42 ` Alexander Dahl
2024-04-11 15:04 ` [ptxdist] [APPLIED] " Michael Olbrich
1 sibling, 0 replies; 7+ messages in thread
From: Alexander Dahl @ 2024-04-09 8:42 UTC (permalink / raw)
To: Markus Heidelberg; +Cc: ptxdist
Am Tue, Apr 09, 2024 at 09:37:45AM +0200 schrieb Markus Heidelberg:
> Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
> ---
> doc/ref_make_variables.rst | 2 +-
> platforms/image_ipkg.in | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/doc/ref_make_variables.rst b/doc/ref_make_variables.rst
> index 6bba9db5d..775ff71be 100644
> --- a/doc/ref_make_variables.rst
> +++ b/doc/ref_make_variables.rst
> @@ -486,7 +486,7 @@ different.
> Note that this will not ensure that the packages are enabled or that all
> all package dependencies are satisfied. ``$(PTX_PACKAGES_INSTALL)`` can
> be used to specify all enabled packages. Or ``$(call ptx/collection,
> - $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be used to to
> + $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be used to
> specify the packages enabled by this collection. In both cases ``=`` must
> be used instead of ``:=`` due to the makefile include order.
>
> diff --git a/platforms/image_ipkg.in b/platforms/image_ipkg.in
> index 106a3cb77..11ddaa9d1 100644
> --- a/platforms/image_ipkg.in
> +++ b/platforms/image_ipkg.in
> @@ -30,7 +30,7 @@ menuconfig IMAGE_IPKG_SIGN_OPENSSL
> select HOST_OPENSSL
> prompt "sign ipkg-repository with openssl"
> help
> - Use openssl to to sign the Packages file in the package
> + Use openssl to sign the Packages file in the package
> repository.
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Greets
Alex
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ptxdist] [PATCH 1/2] Fix typos "can/must be uses" -> "used"
2024-04-09 7:37 ` [ptxdist] [PATCH 1/2] Fix typos "can/must be uses" -> "used" Markus Heidelberg
@ 2024-04-09 8:45 ` Alexander Dahl
2024-04-11 15:04 ` [ptxdist] [APPLIED] " Michael Olbrich
1 sibling, 0 replies; 7+ messages in thread
From: Alexander Dahl @ 2024-04-09 8:45 UTC (permalink / raw)
To: Markus Heidelberg; +Cc: ptxdist
Hello Markus,
Am Tue, Apr 09, 2024 at 09:37:44AM +0200 schrieb Markus Heidelberg:
> Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
> ---
> doc/multi_image_platforms.inc | 6 +++---
> doc/ref_make_variables.rst | 6 +++---
> rules/other/Toplevel.make | 2 +-
> 3 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/doc/multi_image_platforms.inc b/doc/multi_image_platforms.inc
> index 2c8838f4e..726a42767 100644
> --- a/doc/multi_image_platforms.inc
> +++ b/doc/multi_image_platforms.inc
> @@ -26,7 +26,7 @@ package rules manually. See :ref:`adding_new_packages` for more details one
> how to create a new package.
>
> .. note:: PTXdist looks in ``patches/$(<PKG>)`` for the patches. Symlinks
> - can be uses to share the patch stack across multiple bootloader packages.
> + can be used to share the patch stack across multiple bootloader packages.
>
> .. _multi_image_individual_root_filesystems:
>
> @@ -46,7 +46,7 @@ There are two ways to mange the package list for the image:
> Manually create the package list by listing package names or using **make**
> macros to manipulate the default package list ``$(PTX_PACKAGES_INSTALL)``.
>
> - To add a single custom package, extra packages can be uses. An extra package
> + To add a single custom package, extra packages can be used. An extra package
> is not added to ``$(PTX_PACKAGES_INSTALL)``. It is created by modifying the
> package rule like this:
>
> @@ -93,7 +93,7 @@ The final steps are highly hardware dependent. In some cases a bootloader
> image and a rootfs are all that is needed.
>
> To boot from SD-Card a disk image including bootloader, partition table and
> -rootfs is needed. The ``image-genimage`` template can be uses again to
> +rootfs is needed. The ``image-genimage`` template can be used again to
> create such an image for each variant.
>
> .. note:: The genimage config files in ``config/images/`` are good examples
> diff --git a/doc/ref_make_variables.rst b/doc/ref_make_variables.rst
> index 31616ac6f..6bba9db5d 100644
> --- a/doc/ref_make_variables.rst
> +++ b/doc/ref_make_variables.rst
> @@ -478,7 +478,7 @@ different.
> package then this package should be selected in the menu file.
>
> ``<PKG>_PKGS``
> - This is another mechanism to add files to the image. It can be uses
> + This is another mechanism to add files to the image. It can be used
> instead of or in addition to ``<PKG>_FILES``. It must be set to a list of
> ptxdist packages (the lowercase name of the packages). PTXdist will add
> the necessary dependencies.
> @@ -486,9 +486,9 @@ different.
> Note that this will not ensure that the packages are enabled or that all
> all package dependencies are satisfied. ``$(PTX_PACKAGES_INSTALL)`` can
> be used to specify all enabled packages. Or ``$(call ptx/collection,
> - $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be uses to to
> + $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be used to to
> specify the packages enabled by this collection. In both cases ``=`` must
> - be uses instead of ``:=`` due to the makefile include order.
> + be used instead of ``:=`` due to the makefile include order.
>
> ``<PKG>_CONFIG``
> ``genimage`` packages use this to specify the ``genimage`` configuration
> diff --git a/rules/other/Toplevel.make b/rules/other/Toplevel.make
> index f1a13d72f..ac2289431 100644
> --- a/rules/other/Toplevel.make
> +++ b/rules/other/Toplevel.make
> @@ -203,7 +203,7 @@ endif
> #
> # Pattern target to allow printing variable
> # $(filter ..) is used to match against all existing variables so patterns
> -# containing '%' can be uses to print multiple variables.
> +# containing '%' can be used to print multiple variables.
> # In verbose mode, '<name>=<value>' is printed.
> # Trying to print undefined variables results in an error unless '-k' is
> # used. In this case an empty value is printed.
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Greets
Alex
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ptxdist] [APPLIED] Fix typos "can/must be uses" -> "used"
2024-04-09 7:37 ` [ptxdist] [PATCH 1/2] Fix typos "can/must be uses" -> "used" Markus Heidelberg
2024-04-09 8:45 ` Alexander Dahl
@ 2024-04-11 15:04 ` Michael Olbrich
1 sibling, 0 replies; 7+ messages in thread
From: Michael Olbrich @ 2024-04-11 15:04 UTC (permalink / raw)
To: ptxdist; +Cc: Markus Heidelberg
Thanks, applied as 4afd6a07eaae49b0cf9e8c1681140fb38eb0cabe.
Michael
[sent from post-receive hook]
On Thu, 11 Apr 2024 17:04:55 +0200, Markus Heidelberg <m.heidelberg@cab.de> wrote:
> Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
> Reviewed-by: Alexander Dahl <ada@thorsis.com>
> Message-Id: <20240409073745.1549906-2-m.heidelberg@cab.de>
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
>
> diff --git a/doc/multi_image_platforms.inc b/doc/multi_image_platforms.inc
> index 2c8838f4eca5..726a4276740c 100644
> --- a/doc/multi_image_platforms.inc
> +++ b/doc/multi_image_platforms.inc
> @@ -26,7 +26,7 @@ package rules manually. See :ref:`adding_new_packages` for more details one
> how to create a new package.
>
> .. note:: PTXdist looks in ``patches/$(<PKG>)`` for the patches. Symlinks
> - can be uses to share the patch stack across multiple bootloader packages.
> + can be used to share the patch stack across multiple bootloader packages.
>
> .. _multi_image_individual_root_filesystems:
>
> @@ -46,7 +46,7 @@ There are two ways to mange the package list for the image:
> Manually create the package list by listing package names or using **make**
> macros to manipulate the default package list ``$(PTX_PACKAGES_INSTALL)``.
>
> - To add a single custom package, extra packages can be uses. An extra package
> + To add a single custom package, extra packages can be used. An extra package
> is not added to ``$(PTX_PACKAGES_INSTALL)``. It is created by modifying the
> package rule like this:
>
> @@ -93,7 +93,7 @@ The final steps are highly hardware dependent. In some cases a bootloader
> image and a rootfs are all that is needed.
>
> To boot from SD-Card a disk image including bootloader, partition table and
> -rootfs is needed. The ``image-genimage`` template can be uses again to
> +rootfs is needed. The ``image-genimage`` template can be used again to
> create such an image for each variant.
>
> .. note:: The genimage config files in ``config/images/`` are good examples
> diff --git a/doc/ref_make_variables.rst b/doc/ref_make_variables.rst
> index 31616ac6f349..6bba9db5d773 100644
> --- a/doc/ref_make_variables.rst
> +++ b/doc/ref_make_variables.rst
> @@ -478,7 +478,7 @@ different.
> package then this package should be selected in the menu file.
>
> ``<PKG>_PKGS``
> - This is another mechanism to add files to the image. It can be uses
> + This is another mechanism to add files to the image. It can be used
> instead of or in addition to ``<PKG>_FILES``. It must be set to a list of
> ptxdist packages (the lowercase name of the packages). PTXdist will add
> the necessary dependencies.
> @@ -486,9 +486,9 @@ different.
> Note that this will not ensure that the packages are enabled or that all
> all package dependencies are satisfied. ``$(PTX_PACKAGES_INSTALL)`` can
> be used to specify all enabled packages. Or ``$(call ptx/collection,
> - $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be uses to to
> + $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be used to to
> specify the packages enabled by this collection. In both cases ``=`` must
> - be uses instead of ``:=`` due to the makefile include order.
> + be used instead of ``:=`` due to the makefile include order.
>
> ``<PKG>_CONFIG``
> ``genimage`` packages use this to specify the ``genimage`` configuration
> diff --git a/rules/other/Toplevel.make b/rules/other/Toplevel.make
> index f1a13d72f9b8..ac2289431ea9 100644
> --- a/rules/other/Toplevel.make
> +++ b/rules/other/Toplevel.make
> @@ -203,7 +203,7 @@ endif
> #
> # Pattern target to allow printing variable
> # $(filter ..) is used to match against all existing variables so patterns
> -# containing '%' can be uses to print multiple variables.
> +# containing '%' can be used to print multiple variables.
> # In verbose mode, '<name>=<value>' is printed.
> # Trying to print undefined variables results in an error unless '-k' is
> # used. In this case an empty value is printed.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ptxdist] [APPLIED] Fix duplicated "to to" in texts
2024-04-09 7:37 ` [ptxdist] [PATCH 2/2] Fix duplicated "to to" in texts Markus Heidelberg
2024-04-09 8:42 ` Alexander Dahl
@ 2024-04-11 15:04 ` Michael Olbrich
1 sibling, 0 replies; 7+ messages in thread
From: Michael Olbrich @ 2024-04-11 15:04 UTC (permalink / raw)
To: ptxdist; +Cc: Markus Heidelberg
Thanks, applied as 7b26087bb4521871942476f077598bedc17bf29e.
Michael
[sent from post-receive hook]
On Thu, 11 Apr 2024 17:04:56 +0200, Markus Heidelberg <m.heidelberg@cab.de> wrote:
> Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
> Reviewed-by: Alexander Dahl <ada@thorsis.com>
> Message-Id: <20240409073745.1549906-3-m.heidelberg@cab.de>
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
>
> diff --git a/doc/ref_make_variables.rst b/doc/ref_make_variables.rst
> index 6bba9db5d773..775ff71be64f 100644
> --- a/doc/ref_make_variables.rst
> +++ b/doc/ref_make_variables.rst
> @@ -486,7 +486,7 @@ different.
> Note that this will not ensure that the packages are enabled or that all
> all package dependencies are satisfied. ``$(PTX_PACKAGES_INSTALL)`` can
> be used to specify all enabled packages. Or ``$(call ptx/collection,
> - $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be used to to
> + $(PTXDIST_WORKSPACE)/configs/<collection-file-name>)`` can be used to
> specify the packages enabled by this collection. In both cases ``=`` must
> be used instead of ``:=`` due to the makefile include order.
>
> diff --git a/platforms/image_ipkg.in b/platforms/image_ipkg.in
> index 106a3cb77d97..11ddaa9d1e35 100644
> --- a/platforms/image_ipkg.in
> +++ b/platforms/image_ipkg.in
> @@ -30,7 +30,7 @@ menuconfig IMAGE_IPKG_SIGN_OPENSSL
> select HOST_OPENSSL
> prompt "sign ipkg-repository with openssl"
> help
> - Use openssl to to sign the Packages file in the package
> + Use openssl to sign the Packages file in the package
> repository.
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2024-04-11 15:05 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-09 7:37 [ptxdist] [PATCH 0/2] Fix a few typos and duplicated words Markus Heidelberg
2024-04-09 7:37 ` [ptxdist] [PATCH 1/2] Fix typos "can/must be uses" -> "used" Markus Heidelberg
2024-04-09 8:45 ` Alexander Dahl
2024-04-11 15:04 ` [ptxdist] [APPLIED] " Michael Olbrich
2024-04-09 7:37 ` [ptxdist] [PATCH 2/2] Fix duplicated "to to" in texts Markus Heidelberg
2024-04-09 8:42 ` Alexander Dahl
2024-04-11 15:04 ` [ptxdist] [APPLIED] " Michael Olbrich
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox