mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
* [ptxdist] [PATCH v2 1/3] util-linux-ng: Sort config entries
@ 2022-09-29 17:51 Ladislav Michl
  2022-09-29 17:54 ` [ptxdist] [PATCH 2/3] util-linux-ng: Use for loop to install libs and tools Ladislav Michl
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Ladislav Michl @ 2022-09-29 17:51 UTC (permalink / raw)
  To: ptxdist

From: Ladislav Michl <ladis@linux-mips.org>

Split menu entries into groups and sort them alphabetically.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
 CHANGES:
 - v2: None

 rules/util-linux-ng.in | 610 +++++++++++++++++++++--------------------
 1 file changed, 312 insertions(+), 298 deletions(-)

diff --git a/rules/util-linux-ng.in b/rules/util-linux-ng.in
index b317d6505..772d913ff 100644
--- a/rules/util-linux-ng.in
+++ b/rules/util-linux-ng.in
@@ -44,36 +44,7 @@ config UTIL_LINUX_NG_PARTX_TOOLS
 config UTIL_LINUX_NG_SCHEDUTILS
 	bool
 
-config UTIL_LINUX_NG_AGETTY
-	bool
-	prompt "agetty"
-	help
-	  A small getty.
-
-config UTIL_LINUX_NG_COLUMN
-	bool
-	select UTIL_LINUX_NG_LIBSMARTCOLS
-	prompt "column"
-	help
-	  Columnate lists.
-
-config UTIL_LINUX_NG_LINE
-	bool
-	prompt "line"
-	help
-	  The line utility.
-
-config UTIL_LINUX_NG_GETOPT
-	bool
-	prompt "getopt"
-	depends on !BUSYBOX_GETOPT || ALLYES
-	help
-	  The getopt is used to break up (parse) options in command
-	  lines for easy parsing by shell procedures, and to check
-	  for valid options.
-
-comment "BusyBox' getopt is selected!"
-	depends on BUSYBOX_GETOPT
+comment "disk-utils"
 
 config UTIL_LINUX_NG_ADDPART
 	bool
@@ -82,46 +53,22 @@ config UTIL_LINUX_NG_ADDPART
 	help
 	  The addpart utility.
 
-config UTIL_LINUX_NG_DELPART
+config UTIL_LINUX_NG_CFDISK
 	bool
-	select UTIL_LINUX_NG_PARTX_TOOLS
-	prompt "delpart"
+	select UTIL_LINUX_NG_LIBFDISK
+	select UTIL_LINUX_NG_LIBSMARTCOLS
+	select UTIL_LINUX_NG_FDISKS
+	select UTIL_LINUX_NG_USES_NCURSES
+	prompt "cfdisk"
 	help
-	  The delpart utility.
+	  cfdisk is a curses based program for partitioning any hard disk drive.
 
-config UTIL_LINUX_NG_PARTX
+config UTIL_LINUX_NG_DELPART
 	bool
 	select UTIL_LINUX_NG_PARTX_TOOLS
-	prompt "partx"
-	help
-	  The partx utility.
-
-config UTIL_LINUX_NG_DMESG
-	bool
-	depends on !BUSYBOX_DMESG || ALLYES
-	prompt "dmesg"
-	help
-	  The dmesg utility.
-
-comment "BusyBox' dmesg is selected!"
-	depends on BUSYBOX_DMESG
-
-config UTIL_LINUX_NG_NSENTER
-	bool
-	prompt "nsenter"
-	help
-	  The nsenter utility
-
-config UTIL_LINUX_NG_MOUNTPOINT
-	bool
-	select UTIL_LINUX_NG_LIBMOUNT
-	depends on !BUSYBOX_MOUNTPOINT || ALLYES
-	prompt "mountpoint"
+	prompt "delpart"
 	help
-	  The mountpoint utility.
-
-comment "BusyBox' mountpoint is selected!"
-	depends on BUSYBOX_MOUNTPOINT
+	  The delpart utility.
 
 config UTIL_LINUX_NG_FDISK
 	bool
@@ -136,25 +83,26 @@ config UTIL_LINUX_NG_FDISK
 comment "BusyBox' fdisk is selected!"
 	depends on BUSYBOX_FDISK
 
-config UTIL_LINUX_NG_SFDISK
+config UTIL_LINUX_NG_FSCK
 	bool
-	prompt "sfdisk"
-	select UTIL_LINUX_NG_LIBFDISK
-	select UTIL_LINUX_NG_LIBSMARTCOLS
-	select UTIL_LINUX_NG_FDISKS
+	prompt "fsck"
+	select UTIL_LINUX_NG_LIBMOUNT
+	depends on !BUSYBOX_FSCK || ALLYES
 	help
-	  sfdisk - Partition table manipulator for Linux,
-	  scriptable for unattended partitioning
+	  fsck  is  used  to  check and optionally repair one or
+	  more Linux file systems. fsck is simply a front-end for
+	  the various file system checkers (fsck.fstype) available
+	  under Linux.
 
-config UTIL_LINUX_NG_CFDISK
+comment "BusyBox' fsck is selected!"
+	depends on BUSYBOX_FSCK
+
+config UTIL_LINUX_NG_MKFS
 	bool
-	select UTIL_LINUX_NG_LIBFDISK
-	select UTIL_LINUX_NG_LIBSMARTCOLS
-	select UTIL_LINUX_NG_FDISKS
-	select UTIL_LINUX_NG_USES_NCURSES
-	prompt "cfdisk"
+	prompt "mkfs"
 	help
-	  cfdisk is a curses based program for partitioning any hard disk drive.
+	  The mkfs command is a generic wrapper for fs specific
+	  mkfs.* commands.
 
 config UTIL_LINUX_NG_MKSWAP
 	bool
@@ -173,164 +121,134 @@ config UTIL_LINUX_NG_MKSWAP_UUID
 comment "BusyBox' mkswap is selected!"
 	depends on BUSYBOX_MKSWAP
 
-config UTIL_LINUX_NG_SWAPON
+config UTIL_LINUX_NG_PARTX
 	bool
-	prompt "swapon"
-	select UTIL_LINUX_NG_LIBBLKID
-	select UTIL_LINUX_NG_LIBMOUNT
-	select UTIL_LINUX_NG_LIBSMARTCOLS
-	depends on !BUSYBOX_SWAPON || ALLYES
+	select UTIL_LINUX_NG_PARTX_TOOLS
+	prompt "partx"
 	help
-	  Swapon is used to specify devices on which paging and swapping are to take place.
-
-comment "BusyBox' swapon is selected!"
-	depends on BUSYBOX_SWAPON
+	  The partx utility.
 
-config UTIL_LINUX_NG_LOSETUP
+config UTIL_LINUX_NG_SFDISK
 	bool
-	prompt "losetup"
+	prompt "sfdisk"
+	select UTIL_LINUX_NG_LIBFDISK
 	select UTIL_LINUX_NG_LIBSMARTCOLS
-	depends on !BUSYBOX_LOSETUP || ALLYES
+	select UTIL_LINUX_NG_FDISKS
 	help
-	  losetup is used to associate or detach a loop device with a regular
-	  file or block device, and to query the status of a loop device.
+	  sfdisk - Partition table manipulator for Linux,
+	  scriptable for unattended partitioning
 
-comment "BusyBox' losetup is selected!"
-	depends on BUSYBOX_LOSETUP
+comment "login-utils"
 
-config UTIL_LINUX_NG_MOUNT
+config UTIL_LINUX_NG_LOGIN
 	bool
-	prompt "mount"
-	select UTIL_LINUX_NG_LIBMOUNT
-	depends on !BUSYBOX_MOUNT || ALLYES
+	select UTIL_LINUX_NG_USES_PAM
+	depends on GLOBAL_PAM && ((!BUSYBOX_LOGIN && !SHADOW) || ALLYES)
+	prompt "login"
 	help
-	  The mount command serves to attach the file system
-	  found on some device to the big file tree.
+	  The login program is used to establish a new session with
+	  the system.
 
-comment "BusyBox' mount is selected!"
-	depends on BUSYBOX_MOUNT
+comment "BusyBox' login is selected!"
+	depends on BUSYBOX_LOGIN
 
-config UTIL_LINUX_NG_UMOUNT
+comment "Shadow package is selected!"
+	depends on SHADOW
+
+config UTIL_LINUX_NG_SULOGIN
 	bool
-	prompt "umount"
-	select UTIL_LINUX_NG_MOUNT
-	depends on !BUSYBOX_MOUNT || ALLYES
-	depends on !BUSYBOX_UMOUNT || ALLYES
+	depends on !BUSYBOX_SULOGIN || ALLYES
+	prompt "sulogin"
 	help
-	  The mount(8) command serves to attach the file system
-	  found on some device to the big file tree.
-	  Conversely, the umount(8) command will detach it again.
+	  sulogin is invoked by init when the system goes into
+	  single-user mode.
 
-comment "BusyBox' umount is selected!"
-	depends on BUSYBOX_UMOUNT
+comment "BusyBox' sulogin is selected!"
+	depends on BUSYBOX_SULOGIN
 
-config UTIL_LINUX_NG_FLOCK
+comment "misc-utils"
+
+config UTIL_LINUX_NG_BLKID
 	bool
-	prompt "flock"
-	depends on !BUSYBOX_FLOCK || ALLYES
+	select UTIL_LINUX_NG_LIBBLKID
+	depends on !BUSYBOX_BLKID || ALLYES
+	prompt "blkid"
 	help
-	  The flock utility manages flock(2) locks from within
-	  shell scripts or from the command line.
+	  The  blkid  program is the command-line interface to working with libblkid
+	  library.  It can determine the type of content (e.g. filesystem, swap)
+	  a block device holds, and also attributes (tokens, NAME=value pairs) from
+	  the content meta‐data (e.g. LABEL or UUID fields).
 
-comment "BusyBox' flock is selected!"
-	depends on BUSYBOX_FLOCK
+comment "BusyBox' blkid is selected!"
+	depends on BUSYBOX_BLKID
 
-config UTIL_LINUX_NG_FSCK
+config UTIL_LINUX_NG_FINDFS
 	bool
-	prompt "fsck"
-	select UTIL_LINUX_NG_LIBMOUNT
-	depends on !BUSYBOX_FSCK || ALLYES
+	select UTIL_LINUX_NG_LIBBLKID
+	depends on !BUSYBOX_FINDFS || ALLYES
+	prompt "findfs"
 	help
-	  fsck  is  used  to  check and optionally repair one or
-	  more Linux file systems. fsck is simply a front-end for
-	  the various file system checkers (fsck.fstype) available
-	  under Linux.
+	  findfs will search the disks in the system looking for a filesystem
+	  which has a label matching label or a UUID equal to uuid.
 
-comment "BusyBox' fsck is selected!"
-	depends on BUSYBOX_FSCK
+comment "BusyBox' findfs is selected!"
+	depends on BUSYBOX_FINDFS
 
-config UTIL_LINUX_NG_FSFREEZE
+config UTIL_LINUX_NG_GETOPT
 	bool
-	prompt "fsfreeze"
-	depends on !BUSYBOX_FSFREEZE || ALLYES
+	prompt "getopt"
+	depends on !BUSYBOX_GETOPT || ALLYES
 	help
-	  fsfreeze suspends or resumes access to a filesystem.
+	  The getopt is used to break up (parse) options in command
+	  lines for easy parsing by shell procedures, and to check
+	  for valid options.
 
-comment "BusyBox' fsfreeze is selected!"
-	depends on BUSYBOX_FSFREEZE
+comment "BusyBox' getopt is selected!"
+	depends on BUSYBOX_GETOPT
 
-config UTIL_LINUX_NG_FSTRIM
+config UTIL_LINUX_NG_LSBLK
 	bool
-	prompt "fstrim"
-	depends on !BUSYBOX_FSTRIM || ALLYES
+	select UTIL_LINUX_NG_LIBBLKID
+	select UTIL_LINUX_NG_LIBMOUNT
+	select UTIL_LINUX_NG_LIBSMARTCOLS
+	prompt "lsblk"
 	help
-	  fstrim is used on a mounted filesystem to discard (or "trim")
-	  blocks which are not in use by the filesystem. This is useful
-	  for solid-state drives (SSDs) and thinly-provisioned storage.
-
-comment "BusyBox' fstrim is selected!"
-	depends on BUSYBOX_FSTRIM
+	  The lsblk command lists information about all available or the
+	  specified block devices.
 
-config UTIL_LINUX_NG_IPCS
+config UTIL_LINUX_NG_MCOOKIE
 	bool
-	prompt "ipcs"
-	depends on !BUSYBOX_IPCS || ALLYES
+	prompt "mcookie"
 	help
-	  ipcs provides information on the ipc facilities
-	  for which the calling process has read access.
+	  mcookie generates a 128-bit random hexadecimal number for
+	  use with the X authority system.
 
-config UTIL_LINUX_NG_IRQTOP
+config UTIL_LINUX_NG_UUIDD
 	bool
-	select UTIL_LINUX_NG_USES_NCURSES
-	prompt "irqtop"
+	select UTIL_LINUX_NG_LIBUUID
+	prompt "uuidd"
 	help
-	  irqtop is a tool to observe irqs and softirqs in
-	  a top like fashion.
+	  The  uuidd  daemon  is  used by the UUID library to generate
+	  universally unique identifiers (UUIDs), especially time-based UUIDs,
+	  in a secure and guaranteed- unique fashion, even in the face of large
+	  numbers of threads running on different CPUs trying to grab UUIDs.
 
-config UTIL_LINUX_NG_LSIRQ
+config UTIL_LINUX_NG_UUIDGEN
 	bool
-	prompt "lsirq"
-	help
-	  lsirq is a tool to list kernel interrupt information.
-
-comment "BusyBox' ipcs is selected!"
-	depends on BUSYBOX_IPCS
-
-config UTIL_LINUX_NG_IPCRM
-	bool
-	prompt "ipcrm"
-	depends on !BUSYBOX_IPCRM || ALLYES
+	select UTIL_LINUX_NG_LIBUUID
+	prompt "uuidgen"
 	help
-	  ipcrm removes ipc facilities for which the calling process has
-	  read access.
-
-comment "BusyBox' ipcrm is selected!"
-	depends on BUSYBOX_IPCRM
+	  uuidgen is a command-line utility to create a new UUID value.
 
-config UTIL_LINUX_NG_READPROFILE
+config UTIL_LINUX_NG_WIPEFS
 	bool
-	prompt "readprofile"
-	depends on !BUSYBOX_READPROFILE || ALLYES
+	select UTIL_LINUX_NG_LIBBLKID
+	prompt "wipefs"
 	help
-	  The readprofile command uses the /proc/profile information
-	  to print ascii data on standard output.  The output is
-	  organized in three columns: the first is the number of
-	  clock ticks, the second is the name of the C function
-	  in the kernel where those many ticks occurred, and the
-	  third is the normalized  `load' of the procedure, calculated
-	  as a ratio between the number of ticks and the length of the
-	  procedure. The output is filled with blanks to ease readability.
-
-comment "BusyBox' readprofile is selected!"
-	depends on BUSYBOX_READPROFILE
+	  The wipefs program can erase filesystem, raid or partition-table
+	  signatures.
 
-config UTIL_LINUX_NG_SETTERM
-	bool
-	select UTIL_LINUX_NG_USES_NCURSES
-	prompt "setterm"
-	help
-	  setterm - set terminal attributes like terminal name, cursor
-	  blinking and beeper sound
+comment "schedutils"
 
 config UTIL_LINUX_NG_CHRT
 	bool
@@ -343,25 +261,6 @@ config UTIL_LINUX_NG_CHRT
 comment "BusyBox' chrt is selected!"
 	depends on BUSYBOX_CHRT
 
-config UTIL_LINUX_NG_HWCLOCK
-	bool
-	prompt "hwclock"
-	depends on !BUSYBOX_HWCLOCK || ALLYES
-	help
-	  hwclock - The hwclock utility is used to read and set the hardware
-	  clock on a system.  This is primarily used to set the current time
-	  on shutdown in the hardware clock, so the hardware will keep the
-	  correct time when Linux is _not_ running.
-
-comment "BusyBox' hwclock is selected!"
-	depends on BUSYBOX_HWCLOCK
-
-config UTIL_LINUX_NG_WDCTL
-	bool
-	prompt "wdctl"
-	help
-	  wdctl - Utility to show hardware watchdog status.
-
 config UTIL_LINUX_NG_IONICE
 	bool
 	prompt "ionice"
@@ -380,85 +279,131 @@ config UTIL_LINUX_NG_TASKSET
 comment "BusyBox' taskset is selected!"
 	depends on BUSYBOX_TASKSET
 
-config UTIL_LINUX_NG_MCOOKIE
+comment "sys-utils"
+
+config UTIL_LINUX_NG_CHMEM
 	bool
-	prompt "mcookie"
+	prompt "chmem"
 	help
-	  mcookie generates a 128-bit random hexadecimal number for
-	  use with the X authority system.
+	  The chmem command sets a particular size or range of
+	  memory online or offline.
 
-config UTIL_LINUX_NG_LDATTACH
+config UTIL_LINUX_NG_DMESG
 	bool
-	prompt "ldattach"
+	depends on !BUSYBOX_DMESG || ALLYES
+	prompt "dmesg"
 	help
-	  attach a line discipline to a serial line
+	  The dmesg utility.
 
-config UTIL_LINUX_NG_UUIDD
+comment "BusyBox' dmesg is selected!"
+	depends on BUSYBOX_DMESG
+
+config UTIL_LINUX_NG_FLOCK
 	bool
-	select UTIL_LINUX_NG_LIBUUID
-	prompt "uuidd"
+	prompt "flock"
+	depends on !BUSYBOX_FLOCK || ALLYES
 	help
-	  The  uuidd  daemon  is  used by the UUID library to generate
-	  universally unique identifiers (UUIDs), especially time-based UUIDs,
-	  in a secure and guaranteed- unique fashion, even in the face of large
-	  numbers of threads running on different CPUs trying to grab UUIDs.
+	  The flock utility manages flock(2) locks from within
+	  shell scripts or from the command line.
 
-config UTIL_LINUX_NG_UUIDGEN
+comment "BusyBox' flock is selected!"
+	depends on BUSYBOX_FLOCK
+
+config UTIL_LINUX_NG_FSFREEZE
 	bool
-	select UTIL_LINUX_NG_LIBUUID
-	prompt "uuidgen"
+	prompt "fsfreeze"
+	depends on !BUSYBOX_FSFREEZE || ALLYES
 	help
-	  uuidgen is a command-line utility to create a new UUID value.
+	  fsfreeze suspends or resumes access to a filesystem.
 
-config UTIL_LINUX_NG_BLKID
+comment "BusyBox' fsfreeze is selected!"
+	depends on BUSYBOX_FSFREEZE
+
+config UTIL_LINUX_NG_FSTRIM
 	bool
-	select UTIL_LINUX_NG_LIBBLKID
-	depends on !BUSYBOX_BLKID || ALLYES
-	prompt "blkid"
+	prompt "fstrim"
+	depends on !BUSYBOX_FSTRIM || ALLYES
 	help
-	  The  blkid  program is the command-line interface to working with libblkid
-	  library.  It can determine the type of content (e.g. filesystem, swap)
-	  a block device holds, and also attributes (tokens, NAME=value pairs) from
-	  the content meta‐data (e.g. LABEL or UUID fields).
+	  fstrim is used on a mounted filesystem to discard (or "trim")
+	  blocks which are not in use by the filesystem. This is useful
+	  for solid-state drives (SSDs) and thinly-provisioned storage.
 
-comment "BusyBox' blkid is selected!"
-	depends on BUSYBOX_BLKID
+comment "BusyBox' fstrim is selected!"
+	depends on BUSYBOX_FSTRIM
 
-config UTIL_LINUX_NG_LSBLK
+config UTIL_LINUX_NG_HWCLOCK
 	bool
-	select UTIL_LINUX_NG_LIBBLKID
-	select UTIL_LINUX_NG_LIBMOUNT
-	select UTIL_LINUX_NG_LIBSMARTCOLS
-	prompt "lsblk"
+	prompt "hwclock"
+	depends on !BUSYBOX_HWCLOCK || ALLYES
 	help
-	  The lsblk command lists information about all available or the
-	  specified block devices.
+	  hwclock - The hwclock utility is used to read and set the hardware
+	  clock on a system.  This is primarily used to set the current time
+	  on shutdown in the hardware clock, so the hardware will keep the
+	  correct time when Linux is _not_ running.
 
-config UTIL_LINUX_NG_FINDFS
+comment "BusyBox' hwclock is selected!"
+	depends on BUSYBOX_HWCLOCK
+
+config UTIL_LINUX_NG_IPCRM
 	bool
-	select UTIL_LINUX_NG_LIBBLKID
-	depends on !BUSYBOX_FINDFS || ALLYES
-	prompt "findfs"
+	prompt "ipcrm"
+	depends on !BUSYBOX_IPCRM || ALLYES
 	help
-	  findfs will search the disks in the system looking for a filesystem
-	  which has a label matching label or a UUID equal to uuid.
+	  ipcrm removes ipc facilities for which the calling process has
+	  read access.
 
-comment "BusyBox' findfs is selected!"
-	depends on BUSYBOX_FINDFS
+comment "BusyBox' ipcrm is selected!"
+	depends on BUSYBOX_IPCRM
 
-config UTIL_LINUX_NG_WIPEFS
+config UTIL_LINUX_NG_IPCS
 	bool
-	select UTIL_LINUX_NG_LIBBLKID
-	prompt "wipefs"
+	prompt "ipcs"
+	depends on !BUSYBOX_IPCS || ALLYES
 	help
-	  The wipefs program can erase filesystem, raid or partition-table
-	  signatures.
+	  ipcs provides information on the ipc facilities
+	  for which the calling process has read access.
 
-config UTIL_LINUX_NG_ZRAMCTL
+comment "BusyBox' ipcs is selected!"
+	depends on BUSYBOX_IPCS
+
+config UTIL_LINUX_NG_IRQTOP
 	bool
-	prompt "zramctl"
+	select UTIL_LINUX_NG_USES_NCURSES
+	prompt "irqtop"
 	help
-	  The zramctl program is a tool to set up and control zram devices.
+	  irqtop is a tool to observe irqs and softirqs in
+	  a top like fashion.
+
+config UTIL_LINUX_NG_LDATTACH
+	bool
+	prompt "ldattach"
+	help
+	  attach a line discipline to a serial line
+
+config UTIL_LINUX_NG_LOSETUP
+	bool
+	prompt "losetup"
+	select UTIL_LINUX_NG_LIBSMARTCOLS
+	depends on !BUSYBOX_LOSETUP || ALLYES
+	help
+	  losetup is used to associate or detach a loop device with a regular
+	  file or block device, and to query the status of a loop device.
+
+comment "BusyBox' losetup is selected!"
+	depends on BUSYBOX_LOSETUP
+
+config UTIL_LINUX_NG_LSCPU
+	bool
+	select UTIL_LINUX_NG_LIBSMARTCOLS
+	prompt "lscpu"
+	help
+	  lscpu shows information about the CPU architecture
+
+config UTIL_LINUX_NG_LSIRQ
+	bool
+	prompt "lsirq"
+	help
+	  lsirq is a tool to list kernel interrupt information.
 
 config UTIL_LINUX_NG_LSMEM
 	bool
@@ -467,52 +412,74 @@ config UTIL_LINUX_NG_LSMEM
 	  The lsmem command lists the ranges of available memory and
 	  it's online status.
 
-config UTIL_LINUX_NG_CHMEM
+config UTIL_LINUX_NG_MOUNT
 	bool
-	prompt "chmem"
+	prompt "mount"
+	select UTIL_LINUX_NG_LIBMOUNT
+	depends on !BUSYBOX_MOUNT || ALLYES
 	help
-	  The chmem command sets a particular size or range of
-	  memory online or offline.
+	  The mount command serves to attach the file system
+	  found on some device to the big file tree.
 
-config UTIL_LINUX_NG_MKFS
+comment "BusyBox' mount is selected!"
+	depends on BUSYBOX_MOUNT
+
+config UTIL_LINUX_NG_MOUNTPOINT
 	bool
-	prompt "mkfs"
+	select UTIL_LINUX_NG_LIBMOUNT
+	depends on !BUSYBOX_MOUNTPOINT || ALLYES
+	prompt "mountpoint"
 	help
-	  The mkfs command is a generic wrapper for fs specific
-	  mkfs.* commands.
+	  The mountpoint utility.
 
-config UTIL_LINUX_NG_LSCPU
+comment "BusyBox' mountpoint is selected!"
+	depends on BUSYBOX_MOUNTPOINT
+
+config UTIL_LINUX_NG_NSENTER
 	bool
-	select UTIL_LINUX_NG_LIBSMARTCOLS
-	prompt "lscpu"
+	prompt "nsenter"
 	help
-	  lscpu shows information about the CPU architecture
+	  The nsenter utility
 
-config UTIL_LINUX_NG_LOGIN
+config UTIL_LINUX_NG_PIVOT_ROOT
 	bool
-	select UTIL_LINUX_NG_USES_PAM
-	depends on GLOBAL_PAM && ((!BUSYBOX_LOGIN && !SHADOW) || ALLYES)
-	prompt "login"
+	depends on !BUSYBOX_PIVOT_ROOT
+	prompt "pivot_root"
 	help
-	  The login program is used to establish a new session with
-	  the system.
+	  change the root filesystem.
 
-comment "BusyBox' login is selected!"
-	depends on BUSYBOX_LOGIN
+comment "BusyBox' pivot_root is selected!"
+	depends on BUSYBOX_PIVOT_ROOT
 
-comment "Shadow package is selected!"
-	depends on SHADOW
+config UTIL_LINUX_NG_READPROFILE
+	bool
+	prompt "readprofile"
+	depends on !BUSYBOX_READPROFILE || ALLYES
+	help
+	  The readprofile command uses the /proc/profile information
+	  to print ascii data on standard output.  The output is
+	  organized in three columns: the first is the number of
+	  clock ticks, the second is the name of the C function
+	  in the kernel where those many ticks occurred, and the
+	  third is the normalized  `load' of the procedure, calculated
+	  as a ratio between the number of ticks and the length of the
+	  procedure. The output is filled with blanks to ease readability.
 
-config UTIL_LINUX_NG_SULOGIN
+comment "BusyBox' readprofile is selected!"
+	depends on BUSYBOX_READPROFILE
+
+config UTIL_LINUX_NG_SWAPON
 	bool
-	depends on !BUSYBOX_SULOGIN || ALLYES
-	prompt "sulogin"
+	prompt "swapon"
+	select UTIL_LINUX_NG_LIBBLKID
+	select UTIL_LINUX_NG_LIBMOUNT
+	select UTIL_LINUX_NG_LIBSMARTCOLS
+	depends on !BUSYBOX_SWAPON || ALLYES
 	help
-	  sulogin is invoked by init when the system goes into
-	  single-user mode.
+	  Swapon is used to specify devices on which paging and swapping are to take place.
 
-comment "BusyBox' sulogin is selected!"
-	depends on BUSYBOX_SULOGIN
+comment "BusyBox' swapon is selected!"
+	depends on BUSYBOX_SWAPON
 
 config UTIL_LINUX_NG_SWITCH_ROOT
 	bool
@@ -525,14 +492,61 @@ config UTIL_LINUX_NG_SWITCH_ROOT
 comment "BusyBox' switch_root is selected!"
 	depends on BUSYBOX_SWITCH_ROOT
 
-config UTIL_LINUX_NG_PIVOT_ROOT
+config UTIL_LINUX_NG_UMOUNT
 	bool
-	depends on !BUSYBOX_PIVOT_ROOT
-	prompt "pivot_root"
+	prompt "umount"
+	select UTIL_LINUX_NG_MOUNT
+	depends on !BUSYBOX_MOUNT || ALLYES
+	depends on !BUSYBOX_UMOUNT || ALLYES
 	help
-	  change the root filesystem.
+	  The mount(8) command serves to attach the file system
+	  found on some device to the big file tree.
+	  Conversely, the umount(8) command will detach it again.
 
-comment "BusyBox' pivot_root is selected!"
-	depends on BUSYBOX_PIVOT_ROOT
+comment "BusyBox' umount is selected!"
+	depends on BUSYBOX_UMOUNT
+
+config UTIL_LINUX_NG_WDCTL
+	bool
+	prompt "wdctl"
+	help
+	  wdctl - Utility to show hardware watchdog status.
+
+config UTIL_LINUX_NG_ZRAMCTL
+	bool
+	prompt "zramctl"
+	help
+	  The zramctl program is a tool to set up and control zram devices.
+
+comment "term-utils"
+
+config UTIL_LINUX_NG_AGETTY
+	bool
+	prompt "agetty"
+	help
+	  A small getty.
+
+config UTIL_LINUX_NG_SETTERM
+	bool
+	select UTIL_LINUX_NG_USES_NCURSES
+	prompt "setterm"
+	help
+	  setterm - set terminal attributes like terminal name, cursor
+	  blinking and beeper sound
+
+comment "text-utils"
+
+config UTIL_LINUX_NG_COLUMN
+	bool
+	select UTIL_LINUX_NG_LIBSMARTCOLS
+	prompt "column"
+	help
+	  Columnate lists.
+
+config UTIL_LINUX_NG_LINE
+	bool
+	prompt "line"
+	help
+	  The line utility.
 
 endif
-- 
2.32.0




^ permalink raw reply	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-10-19  5:41 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-29 17:51 [ptxdist] [PATCH v2 1/3] util-linux-ng: Sort config entries Ladislav Michl
2022-09-29 17:54 ` [ptxdist] [PATCH 2/3] util-linux-ng: Use for loop to install libs and tools Ladislav Michl
2022-10-19  5:41   ` [ptxdist] [APPLIED] " Michael Olbrich
2022-09-29 17:54 ` [ptxdist] [PATCH v2 3/3] util-linux-ng: Rename to util-linux Ladislav Michl
2022-10-18  5:52   ` Ladislav Michl
2022-10-18  7:17     ` Michael Olbrich
2022-10-19  5:41 ` [ptxdist] [APPLIED] util-linux-ng: Sort config entries Michael Olbrich

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox