* [ptxdist] [PATCH] sdl2: Version bump. 2.0.22 -> 2.24.1
@ 2022-10-13 11:14 Christian Melki
2022-10-13 11:14 ` [ptxdist] [PATCH] sdl2-image: Version bump. 2.0.5 -> 2.6.2 Christian Melki
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Christian Melki @ 2022-10-13 11:14 UTC (permalink / raw)
To: ptxdist
https://github.com/libsdl-org/SDL/releases
SDL2 community have changed their version numbering scheme.
So this isn't as big of a bump as the version number would indicate.
But still, quite a lot of changes.
* Removed obsoleted options. Threads can't be disabled,
xvidmode support is removed. Only Xrandr is supported.
Signed-off-by: Christian Melki <christian.melki@t2data.com>
---
rules/sdl2.make | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/rules/sdl2.make b/rules/sdl2.make
index bdd50daa1..599b3b2ae 100644
--- a/rules/sdl2.make
+++ b/rules/sdl2.make
@@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_SDL2) += sdl2
#
# Paths and names
#
-SDL2_VERSION := 2.0.22
-SDL2_MD5 := 40aedb499cb2b6f106d909d9d97f869a
+SDL2_VERSION := 2.24.1
+SDL2_MD5 := 10bad2a286f155565edc611f41345de1
SDL2 := SDL2-$(SDL2_VERSION)
SDL2_SUFFIX := tar.gz
SDL2_URL := https://www.libsdl.org/release/$(SDL2).$(SDL2_SUFFIX)
@@ -50,7 +50,6 @@ SDL2_CONF_OPT := \
--enable-sensor \
--disable-power \
--disable-filesystem \
- --enable-threads \
--enable-timers \
--enable-file \
--enable-loadso \
@@ -100,12 +99,10 @@ SDL2_CONF_OPT := \
--disable-x11-shared \
--$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-xcursor \
--disable-video-x11-xdbe \
- --disable-video-x11-xinerama \
--$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-xinput \
--$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-xrandr \
--disable-video-x11-scrnsaver \
--disable-video-x11-xshape \
- --$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-vm \
--disable-video-vivante \
--disable-video-cocoa \
--disable-video-metal \
--
2.34.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ptxdist] [PATCH] sdl2-image: Version bump. 2.0.5 -> 2.6.2
2022-10-13 11:14 [ptxdist] [PATCH] sdl2: Version bump. 2.0.22 -> 2.24.1 Christian Melki
@ 2022-10-13 11:14 ` Christian Melki
2022-10-19 5:41 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-10-13 11:14 ` [ptxdist] [PATCH] sdl2-ttf: Version bump. 2.0.18 -> 2.20.1 Christian Melki
2022-10-19 5:41 ` [ptxdist] [APPLIED] sdl2: Version bump. 2.0.22 -> 2.24.1 Michael Olbrich
2 siblings, 1 reply; 6+ messages in thread
From: Christian Melki @ 2022-10-13 11:14 UTC (permalink / raw)
To: ptxdist
https://github.com/libsdl-org/SDL_image/releases
SDL2 community have changed their version numbering scheme.
So this isn't as big of a bump as the version number would indicate.
Still they've added notable changes such as:
New backend for JPG and PNG (stb-image).
New image formats AVIF, JXL (JPEGXL) and QOI.
* Disable stb-image. Keep the default libpng and libjpg backends for now.
* Disable JXL images.
* Disable QOI images.
Signed-off-by: Christian Melki <christian.melki@t2data.com>
---
rules/sdl2-image.make | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/rules/sdl2-image.make b/rules/sdl2-image.make
index 77468ffad..a01f69daf 100644
--- a/rules/sdl2-image.make
+++ b/rules/sdl2-image.make
@@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_SDL2_IMAGE) += sdl2-image
#
# Paths and names
#
-SDL2_IMAGE_VERSION := 2.0.5
-SDL2_IMAGE_MD5 := f26f3a153360a8f09ed5220ef7b07aea
+SDL2_IMAGE_VERSION := 2.6.2
+SDL2_IMAGE_MD5 := 35da7c375b1c187b0f684c1c83b3b9c3
SDL2_IMAGE := SDL2_image-$(SDL2_IMAGE_VERSION)
SDL2_IMAGE_SUFFIX := tar.gz
SDL2_IMAGE_URL := https://www.libsdl.org/projects/SDL_image/release/$(SDL2_IMAGE).$(SDL2_IMAGE_SUFFIX)
@@ -34,6 +34,9 @@ SDL2_IMAGE_CONF_OPT := \
--disable-static \
--disable-imageio \
--disable-sdltest \
+ --disable-stb-image \
+ --disable-jxl \
+ --disable-qoi \
--$(call ptx/endis, PTXCONF_SDL2_IMAGE_BMP)-bmp \
--$(call ptx/endis, PTXCONF_SDL2_IMAGE_GIF)-gif \
--$(call ptx/endis, PTXCONF_SDL2_IMAGE_JPG)-jpg \
--
2.34.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ptxdist] [PATCH] sdl2-ttf: Version bump. 2.0.18 -> 2.20.1
2022-10-13 11:14 [ptxdist] [PATCH] sdl2: Version bump. 2.0.22 -> 2.24.1 Christian Melki
2022-10-13 11:14 ` [ptxdist] [PATCH] sdl2-image: Version bump. 2.0.5 -> 2.6.2 Christian Melki
@ 2022-10-13 11:14 ` Christian Melki
2022-10-19 5:41 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-10-19 5:41 ` [ptxdist] [APPLIED] sdl2: Version bump. 2.0.22 -> 2.24.1 Michael Olbrich
2 siblings, 1 reply; 6+ messages in thread
From: Christian Melki @ 2022-10-13 11:14 UTC (permalink / raw)
To: ptxdist
https://github.com/libsdl-org/SDL_ttf/releases
SDL2 community have changed their version numbering scheme.
So this isn't as big of a bump as the version number would indicate.
* Plugs CVE-2018-25032, CVE-2022-27470
* License file changed name and contents is reformatted.
The reformatting is to make github recognize the file
as the correct license.
* Forward patch series with some changes to make them apply cleanly.
* Add global largefile option.
* Disable sdltest.
Signed-off-by: Christian Melki <christian.melki@t2data.com>
---
...01-configure-make-opengl-support-switchable.patch | 12 ++++++------
.../{SDL2_ttf-2.0.18 => SDL2_ttf-2.20.1}/autogen.sh | 0
patches/{SDL2_ttf-2.0.18 => SDL2_ttf-2.20.1}/series | 0
rules/sdl2-ttf.make | 10 ++++++----
4 files changed, 12 insertions(+), 10 deletions(-)
rename patches/{SDL2_ttf-2.0.18 => SDL2_ttf-2.20.1}/0001-configure-make-opengl-support-switchable.patch (75%)
rename patches/{SDL2_ttf-2.0.18 => SDL2_ttf-2.20.1}/autogen.sh (100%)
rename patches/{SDL2_ttf-2.0.18 => SDL2_ttf-2.20.1}/series (100%)
diff --git a/patches/SDL2_ttf-2.0.18/0001-configure-make-opengl-support-switchable.patch b/patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch
similarity index 75%
rename from patches/SDL2_ttf-2.0.18/0001-configure-make-opengl-support-switchable.patch
rename to patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch
index 95d04c40c..95ab1d2bf 100644
--- a/patches/SDL2_ttf-2.0.18/0001-configure-make-opengl-support-switchable.patch
+++ b/patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch
@@ -8,12 +8,12 @@ Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
1 file changed, 7 insertions(+)
diff --git a/configure.ac b/configure.ac
-index cb2a65ee83b7..7123a7c564b4 100644
+index 9b1c36358d41..640a4e228706 100644
--- a/configure.ac
+++ b/configure.ac
-@@ -232,6 +232,12 @@ CheckVisibilityHidden()
- }
- CheckVisibilityHidden
+@@ -304,6 +304,12 @@ AM_CONDITIONAL(USE_BUILTIN_HARFBUZZ, test x$enable_harfbuzz_builtin = xyes)
+ dnl check for LD --no-undefined option
+ CheckNoUndef
+dnl Check to see if OpenGL support is desired
+AC_ARG_ENABLE(opengl,
@@ -24,11 +24,11 @@ index cb2a65ee83b7..7123a7c564b4 100644
dnl Check for OpenGL
case "$host" in
*-*-cygwin* | *-*-mingw*)
-@@ -282,6 +288,7 @@ else
+@@ -354,6 +360,7 @@ else
GL_LIBS=""
fi
AC_SUBST([GL_LIBS])
+fi
AC_SUBST([MATHLIB])
- AC_SUBST([WINDRES])
AC_SUBST([TTF_CFLAGS])
+ AC_SUBST([TTF_LIBS])
diff --git a/patches/SDL2_ttf-2.0.18/autogen.sh b/patches/SDL2_ttf-2.20.1/autogen.sh
similarity index 100%
rename from patches/SDL2_ttf-2.0.18/autogen.sh
rename to patches/SDL2_ttf-2.20.1/autogen.sh
diff --git a/patches/SDL2_ttf-2.0.18/series b/patches/SDL2_ttf-2.20.1/series
similarity index 100%
rename from patches/SDL2_ttf-2.0.18/series
rename to patches/SDL2_ttf-2.20.1/series
diff --git a/rules/sdl2-ttf.make b/rules/sdl2-ttf.make
index 1f649e166..beaad3992 100644
--- a/rules/sdl2-ttf.make
+++ b/rules/sdl2-ttf.make
@@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_SDL2_TTF) += sdl2-ttf
#
# Paths and names
#
-SDL2_TTF_VERSION := 2.0.18
-SDL2_TTF_MD5 := 86d3023ad3fab597203022f856cff103
+SDL2_TTF_VERSION := 2.20.1
+SDL2_TTF_MD5 := 746be429bdfb5892066dcfaf593e1644
SDL2_TTF := SDL2_ttf-$(SDL2_TTF_VERSION)
SDL2_TTF_SUFFIX := tar.gz
SDL2_TTF_URL := https://www.libsdl.org/projects/SDL_ttf/release/$(SDL2_TTF).$(SDL2_TTF_SUFFIX)
@@ -23,7 +23,7 @@ SDL2_TTF_SOURCE := $(SRCDIR)/$(SDL2_TTF).$(SDL2_TTF_SUFFIX)
SDL2_TTF_DIR := $(BUILDDIR)/$(SDL2_TTF)
SDL2_TTF_LICENSE := zlib
SDL2_TTF_LICENSE_FILES := \
- file://COPYING.txt;md5=e98cfd01ca78f683e9d035795810ce87
+ file://LICENSE.txt;md5=771dca8728b18d39b130e19b36514371
# ----------------------------------------------------------------------------
# Prepare
@@ -31,7 +31,9 @@ SDL2_TTF_LICENSE_FILES := \
SDL2_TTF_CONF_TOOL := autoconf
SDL2_TTF_CONF_OPT := \
- $(CROSS_AUTOCONF_USR)
+ $(CROSS_AUTOCONF_USR) \
+ $(GLOBAL_LARGE_FILE_OPTION) \
+ --disable-sdltest
ifdef PTXCONF_SDL2_PULSEAUDIO
SDL2_TTF_LDFLAGS := \
--
2.34.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] [APPLIED] sdl2: Version bump. 2.0.22 -> 2.24.1
2022-10-13 11:14 [ptxdist] [PATCH] sdl2: Version bump. 2.0.22 -> 2.24.1 Christian Melki
2022-10-13 11:14 ` [ptxdist] [PATCH] sdl2-image: Version bump. 2.0.5 -> 2.6.2 Christian Melki
2022-10-13 11:14 ` [ptxdist] [PATCH] sdl2-ttf: Version bump. 2.0.18 -> 2.20.1 Christian Melki
@ 2022-10-19 5:41 ` Michael Olbrich
2 siblings, 0 replies; 6+ messages in thread
From: Michael Olbrich @ 2022-10-19 5:41 UTC (permalink / raw)
To: ptxdist; +Cc: Christian Melki
Thanks, applied as 2765df4f631e54ff844a6b3cd2e54ec1482eb64a.
Michael
[sent from post-receive hook]
On Wed, 19 Oct 2022 07:41:33 +0200, Christian Melki <christian.melki@t2data.com> wrote:
> https://github.com/libsdl-org/SDL/releases
> SDL2 community have changed their version numbering scheme.
> So this isn't as big of a bump as the version number would indicate.
> But still, quite a lot of changes.
>
> * Removed obsoleted options. Threads can't be disabled,
> xvidmode support is removed. Only Xrandr is supported.
>
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> Message-Id: <20221013111452.3298415-1-christian.melki@t2data.com>
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
>
> diff --git a/rules/sdl2.make b/rules/sdl2.make
> index bdd50daa1a53..599b3b2ae7c3 100644
> --- a/rules/sdl2.make
> +++ b/rules/sdl2.make
> @@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_SDL2) += sdl2
> #
> # Paths and names
> #
> -SDL2_VERSION := 2.0.22
> -SDL2_MD5 := 40aedb499cb2b6f106d909d9d97f869a
> +SDL2_VERSION := 2.24.1
> +SDL2_MD5 := 10bad2a286f155565edc611f41345de1
> SDL2 := SDL2-$(SDL2_VERSION)
> SDL2_SUFFIX := tar.gz
> SDL2_URL := https://www.libsdl.org/release/$(SDL2).$(SDL2_SUFFIX)
> @@ -50,7 +50,6 @@ SDL2_CONF_OPT := \
> --enable-sensor \
> --disable-power \
> --disable-filesystem \
> - --enable-threads \
> --enable-timers \
> --enable-file \
> --enable-loadso \
> @@ -100,12 +99,10 @@ SDL2_CONF_OPT := \
> --disable-x11-shared \
> --$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-xcursor \
> --disable-video-x11-xdbe \
> - --disable-video-x11-xinerama \
> --$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-xinput \
> --$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-xrandr \
> --disable-video-x11-scrnsaver \
> --disable-video-x11-xshape \
> - --$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-vm \
> --disable-video-vivante \
> --disable-video-cocoa \
> --disable-video-metal \
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] [APPLIED] sdl2-image: Version bump. 2.0.5 -> 2.6.2
2022-10-13 11:14 ` [ptxdist] [PATCH] sdl2-image: Version bump. 2.0.5 -> 2.6.2 Christian Melki
@ 2022-10-19 5:41 ` Michael Olbrich
0 siblings, 0 replies; 6+ messages in thread
From: Michael Olbrich @ 2022-10-19 5:41 UTC (permalink / raw)
To: ptxdist; +Cc: Christian Melki
Thanks, applied as dd1760573234500f35d8884d950230c8e50df759.
Michael
[sent from post-receive hook]
On Wed, 19 Oct 2022 07:41:34 +0200, Christian Melki <christian.melki@t2data.com> wrote:
> https://github.com/libsdl-org/SDL_image/releases
> SDL2 community have changed their version numbering scheme.
> So this isn't as big of a bump as the version number would indicate.
> Still they've added notable changes such as:
>
> New backend for JPG and PNG (stb-image).
> New image formats AVIF, JXL (JPEGXL) and QOI.
>
> * Disable stb-image. Keep the default libpng and libjpg backends for now.
> * Disable JXL images.
> * Disable QOI images.
>
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> Message-Id: <20221013111452.3298415-2-christian.melki@t2data.com>
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
>
> diff --git a/rules/sdl2-image.make b/rules/sdl2-image.make
> index 77468ffad96e..a01f69daff61 100644
> --- a/rules/sdl2-image.make
> +++ b/rules/sdl2-image.make
> @@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_SDL2_IMAGE) += sdl2-image
> #
> # Paths and names
> #
> -SDL2_IMAGE_VERSION := 2.0.5
> -SDL2_IMAGE_MD5 := f26f3a153360a8f09ed5220ef7b07aea
> +SDL2_IMAGE_VERSION := 2.6.2
> +SDL2_IMAGE_MD5 := 35da7c375b1c187b0f684c1c83b3b9c3
> SDL2_IMAGE := SDL2_image-$(SDL2_IMAGE_VERSION)
> SDL2_IMAGE_SUFFIX := tar.gz
> SDL2_IMAGE_URL := https://www.libsdl.org/projects/SDL_image/release/$(SDL2_IMAGE).$(SDL2_IMAGE_SUFFIX)
> @@ -34,6 +34,9 @@ SDL2_IMAGE_CONF_OPT := \
> --disable-static \
> --disable-imageio \
> --disable-sdltest \
> + --disable-stb-image \
> + --disable-jxl \
> + --disable-qoi \
> --$(call ptx/endis, PTXCONF_SDL2_IMAGE_BMP)-bmp \
> --$(call ptx/endis, PTXCONF_SDL2_IMAGE_GIF)-gif \
> --$(call ptx/endis, PTXCONF_SDL2_IMAGE_JPG)-jpg \
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] [APPLIED] sdl2-ttf: Version bump. 2.0.18 -> 2.20.1
2022-10-13 11:14 ` [ptxdist] [PATCH] sdl2-ttf: Version bump. 2.0.18 -> 2.20.1 Christian Melki
@ 2022-10-19 5:41 ` Michael Olbrich
0 siblings, 0 replies; 6+ messages in thread
From: Michael Olbrich @ 2022-10-19 5:41 UTC (permalink / raw)
To: ptxdist; +Cc: Christian Melki
Thanks, applied as ce36bb22ad61ca1795e4c43c9419d62d605dfd99.
Michael
[sent from post-receive hook]
On Wed, 19 Oct 2022 07:41:35 +0200, Christian Melki <christian.melki@t2data.com> wrote:
> https://github.com/libsdl-org/SDL_ttf/releases
> SDL2 community have changed their version numbering scheme.
> So this isn't as big of a bump as the version number would indicate.
>
> * Plugs CVE-2018-25032, CVE-2022-27470
> * License file changed name and contents is reformatted.
> The reformatting is to make github recognize the file
> as the correct license.
> * Forward patch series with some changes to make them apply cleanly.
> * Add global largefile option.
> * Disable sdltest.
>
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> Message-Id: <20221013111452.3298415-3-christian.melki@t2data.com>
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
>
> diff --git a/patches/SDL2_ttf-2.0.18/0001-configure-make-opengl-support-switchable.patch b/patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch
> similarity index 75%
> rename from patches/SDL2_ttf-2.0.18/0001-configure-make-opengl-support-switchable.patch
> rename to patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch
> index 95d04c40c595..95ab1d2bfcb0 100644
> --- a/patches/SDL2_ttf-2.0.18/0001-configure-make-opengl-support-switchable.patch
> +++ b/patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch
> @@ -8,12 +8,12 @@ Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> 1 file changed, 7 insertions(+)
>
> diff --git a/configure.ac b/configure.ac
> -index cb2a65ee83b7..7123a7c564b4 100644
> +index 9b1c36358d41..640a4e228706 100644
> --- a/configure.ac
> +++ b/configure.ac
> -@@ -232,6 +232,12 @@ CheckVisibilityHidden()
> - }
> - CheckVisibilityHidden
> +@@ -304,6 +304,12 @@ AM_CONDITIONAL(USE_BUILTIN_HARFBUZZ, test x$enable_harfbuzz_builtin = xyes)
> + dnl check for LD --no-undefined option
> + CheckNoUndef
>
> +dnl Check to see if OpenGL support is desired
> +AC_ARG_ENABLE(opengl,
> @@ -24,11 +24,11 @@ index cb2a65ee83b7..7123a7c564b4 100644
> dnl Check for OpenGL
> case "$host" in
> *-*-cygwin* | *-*-mingw*)
> -@@ -282,6 +288,7 @@ else
> +@@ -354,6 +360,7 @@ else
> GL_LIBS=""
> fi
> AC_SUBST([GL_LIBS])
> +fi
> AC_SUBST([MATHLIB])
> - AC_SUBST([WINDRES])
> AC_SUBST([TTF_CFLAGS])
> + AC_SUBST([TTF_LIBS])
> diff --git a/patches/SDL2_ttf-2.0.18/autogen.sh b/patches/SDL2_ttf-2.20.1/autogen.sh
> similarity index 100%
> rename from patches/SDL2_ttf-2.0.18/autogen.sh
> rename to patches/SDL2_ttf-2.20.1/autogen.sh
> diff --git a/patches/SDL2_ttf-2.0.18/series b/patches/SDL2_ttf-2.20.1/series
> similarity index 100%
> rename from patches/SDL2_ttf-2.0.18/series
> rename to patches/SDL2_ttf-2.20.1/series
> diff --git a/rules/sdl2-ttf.make b/rules/sdl2-ttf.make
> index 1f649e166b3d..beaad399285a 100644
> --- a/rules/sdl2-ttf.make
> +++ b/rules/sdl2-ttf.make
> @@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_SDL2_TTF) += sdl2-ttf
> #
> # Paths and names
> #
> -SDL2_TTF_VERSION := 2.0.18
> -SDL2_TTF_MD5 := 86d3023ad3fab597203022f856cff103
> +SDL2_TTF_VERSION := 2.20.1
> +SDL2_TTF_MD5 := 746be429bdfb5892066dcfaf593e1644
> SDL2_TTF := SDL2_ttf-$(SDL2_TTF_VERSION)
> SDL2_TTF_SUFFIX := tar.gz
> SDL2_TTF_URL := https://www.libsdl.org/projects/SDL_ttf/release/$(SDL2_TTF).$(SDL2_TTF_SUFFIX)
> @@ -23,7 +23,7 @@ SDL2_TTF_SOURCE := $(SRCDIR)/$(SDL2_TTF).$(SDL2_TTF_SUFFIX)
> SDL2_TTF_DIR := $(BUILDDIR)/$(SDL2_TTF)
> SDL2_TTF_LICENSE := zlib
> SDL2_TTF_LICENSE_FILES := \
> - file://COPYING.txt;md5=e98cfd01ca78f683e9d035795810ce87
> + file://LICENSE.txt;md5=771dca8728b18d39b130e19b36514371
>
> # ----------------------------------------------------------------------------
> # Prepare
> @@ -31,7 +31,9 @@ SDL2_TTF_LICENSE_FILES := \
>
> SDL2_TTF_CONF_TOOL := autoconf
> SDL2_TTF_CONF_OPT := \
> - $(CROSS_AUTOCONF_USR)
> + $(CROSS_AUTOCONF_USR) \
> + $(GLOBAL_LARGE_FILE_OPTION) \
> + --disable-sdltest
>
> ifdef PTXCONF_SDL2_PULSEAUDIO
> SDL2_TTF_LDFLAGS := \
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-10-19 5:42 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-13 11:14 [ptxdist] [PATCH] sdl2: Version bump. 2.0.22 -> 2.24.1 Christian Melki
2022-10-13 11:14 ` [ptxdist] [PATCH] sdl2-image: Version bump. 2.0.5 -> 2.6.2 Christian Melki
2022-10-19 5:41 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-10-13 11:14 ` [ptxdist] [PATCH] sdl2-ttf: Version bump. 2.0.18 -> 2.20.1 Christian Melki
2022-10-19 5:41 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-10-19 5:41 ` [ptxdist] [APPLIED] sdl2: Version bump. 2.0.22 -> 2.24.1 Michael Olbrich
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox