From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: Christian Melki <christian.melki@t2data.com>
Subject: Re: [ptxdist] [APPLIED] hwdata: New package.
Date: Fri, 21 Jan 2022 08:19:34 +0100 [thread overview]
Message-ID: <20220121071934.1968495-1-m.olbrich@pengutronix.de> (raw)
In-Reply-To: <20220108184518.3774572-2-christian.melki@t2data.com>
Thanks, applied as effdc6de967ab9e86d6939fc821bd97726e038a6.
Michael
[sent from post-receive hook]
On Fri, 21 Jan 2022 08:19:34 +0100, Christian Melki <christian.melki@t2data.com> wrote:
> Introduce the hwdata package.
> It's a maintained set of the classic .ids files provided
> by several packages (usbutils, pciutils etc).
> It uses /usr/share/ for now, as a smaller changeset for
> the introduction. After this has settled, one can move
> packages collectively to /usr/share/hwdata.
>
> This means:
> * Packages need to stop providing their own
> set of these files.
>
> * Packages now select hwdata as a dependency.
>
> * Packages need to stop updating these files. It's done
> by updating the hwdata package.
>
> * Packages can't assume that other packages can read compressed
> variants of the text database.
>
> hwdata will probably be replaced by systemd-hwdb in the long run.
>
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> Message-Id: <20220108184518.3774572-2-christian.melki@t2data.com>
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
>
> diff --git a/rules/hwdata.in b/rules/hwdata.in
> new file mode 100644
> index 000000000000..c4e624b7ff90
> --- /dev/null
> +++ b/rules/hwdata.in
> @@ -0,0 +1,47 @@
> +## SECTION=shell_and_console
> +
> +menuconfig HWDATA
> + tristate
> + prompt "hwdata "
> + help
> + Hwdata package.
> + This package contains identity files for pci and usb etc.
> + Various packages that have not been ported to systemd's binary
> + hwdb may use this instead.
> +
> +if HWDATA
> +
> +config HWDATA_PCI
> + bool
> + prompt "hwdata PCI"
> + help
> + The hwdata PCI (Vendor and product id) data set.
> +
> +config HWDATA_USB
> + bool
> + prompt "hwdata USB"
> + help
> + The hwdata USB (Vendor and product id) data set.
> +
> +config HWDATA_PNP
> + bool
> + prompt "hwdata PNP"
> + help
> + The hwdata PNP (Vendor names and vendor acronyms)
> + data set.
> +
> +config HWDATA_OUI
> + bool
> + prompt "hwdata OUI"
> + help
> + The hwdata OUI (IEEE Organizationally Unique Identifier)
> + data set.
> +
> +config HWDATA_IAB
> + bool
> + prompt "hwdata IAB"
> + help
> + The hwdata IAB (IEEE Individual Address Block)
> + data set.
> +
> +endif
> diff --git a/rules/hwdata.make b/rules/hwdata.make
> new file mode 100644
> index 000000000000..5d09b6c810ca
> --- /dev/null
> +++ b/rules/hwdata.make
> @@ -0,0 +1,84 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2021 by Christian Melki
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_HWDATA) += hwdata
> +
> +#
> +# Paths and names
> +#
> +HWDATA_VERSION := 0.355
> +HWDATA_MD5 := ee30c73571b9392a7b2d77619a6842a5
> +HWDATA := hwdata-$(HWDATA_VERSION)
> +HWDATA_SUFFIX := tar.gz
> +HWDATA_URL := https://github.com/vcrhonek/hwdata/archive/refs/tags/v$(HWDATA_VERSION).$(HWDATA_SUFFIX)
> +HWDATA_SOURCE := $(SRCDIR)/$(HWDATA).$(HWDATA_SUFFIX)
> +HWDATA_DIR := $(BUILDDIR)/$(HWDATA)
> +HWDATA_LICENSE := GPL-2.0-or-later OR XFree86-1.0
> +HWDATA_LICENSE_FILES := \
> + file://LICENSE;md5=1556547711e8246992b999edd9445a57 \
> + file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +HWDATA_PATH := PATH=$(CROSS_PATH)
> +HWDATA_ENV := $(CROSS_ENV)
> +
> +# Package is not really using autoconf, so skip normal cross declaration.
> +# Only text files are processed. Just prefix setting here.
> +HWDATA_CONF_TOOL := autoconf
> +HWDATA_CONF_OPT := \
> + --prefix=/usr
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/hwdata.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, hwdata)
> + @$(call install_fixup, hwdata,PRIORITY,optional)
> + @$(call install_fixup, hwdata,SECTION,base)
> + @$(call install_fixup, hwdata,AUTHOR,"Christian Melki <christian.melki@t2data.com>")
> + @$(call install_fixup, hwdata,DESCRIPTION,missing)
> +
> +ifdef PTXCONF_HWDATA_PCI
> + @$(call install_copy, hwdata, 0, 0, 0644, \
> + $(HWDATA_PKGDIR)/usr/share/hwdata/pci.ids, /usr/share/pci.ids)
> +endif
> +
> +ifdef PTXCONF_HWDATA_USB
> + @$(call install_copy, hwdata, 0, 0, 0644, \
> + $(HWDATA_PKGDIR)/usr/share/hwdata/usb.ids, /usr/share/usb.ids)
> +endif
> +
> +ifdef PTXCONF_HWDATA_PNP
> + @$(call install_copy, hwdata, 0, 0, 0644, \
> + $(HWDATA_PKGDIR)/usr/share/hwdata/pnp.ids, /usr/share/pnp.ids)
> +endif
> +
> +ifdef PTXCONF_HWDATA_OUI
> + @$(call install_copy, hwdata, 0, 0, 0644, \
> + $(HWDATA_PKGDIR)/usr/share/hwdata/oui.txt, /usr/share/oui.txt)
> +endif
> +
> +ifdef PTXCONF_HWDATA_IAB
> + @$(call install_copy, hwdata, 0, 0, 0644, \
> + $(HWDATA_PKGDIR)/usr/share/hwdata/iab.txt, /usr/share/iab.txt)
> +endif
> +
> + @$(call install_finish, hwdata)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
next prev parent reply other threads:[~2022-01-21 7:23 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-08 18:45 [ptxdist] [PATCH 0/7] Hwdata introduction Christian Melki
2022-01-08 18:45 ` [ptxdist] [PATCH 1/7] hwdata: New package Christian Melki
2022-01-21 7:19 ` Michael Olbrich [this message]
2022-01-08 18:45 ` [ptxdist] [PATCH 2/7] usbutils: Version bump 007 -> 014 Christian Melki
2022-01-21 7:19 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-01-08 18:45 ` [ptxdist] [PATCH 3/7] pciutils: Update to accomodate for hwdata package Christian Melki
2022-01-21 7:19 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-01-08 18:45 ` [ptxdist] [PATCH 4/7] usbip: " Christian Melki
2022-01-21 7:19 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-01-08 18:45 ` [ptxdist] [PATCH 5/7] libpciaccess: " Christian Melki
2022-01-21 7:19 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-01-08 18:45 ` [ptxdist] [PATCH 6/7] lshw: Version bump. B.02.14 -> B.02.19.2 + accomodation " Christian Melki
2022-01-21 7:19 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-01-08 18:45 ` [ptxdist] [PATCH 7/7] udev: Update to accomodate " Christian Melki
2022-01-21 7:19 ` [ptxdist] [APPLIED] " Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220121071934.1968495-1-m.olbrich@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=christian.melki@t2data.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox