* [ptxdist] [PATCH v2 1/2] pipewire: version bump 0.3.40 -> 0.3.42 @ 2021-12-16 10:14 Philipp Zabel 2021-12-16 10:14 ` [ptxdist] [PATCH v2 2/2] pipewire: allow to enable RAOP module Philipp Zabel 2021-12-17 13:27 ` [ptxdist] [APPLIED] pipewire: version bump 0.3.40 -> 0.3.42 Michael Olbrich 0 siblings, 2 replies; 4+ messages in thread From: Philipp Zabel @ 2021-12-16 10:14 UTC (permalink / raw) To: ptxdist Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> --- Changes since v1: - Update to 0.3.42 instead of 0.3.41 --- rules/pipewire.make | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/rules/pipewire.make b/rules/pipewire.make index 730f79cc3c57..aaf63ece7a48 100644 --- a/rules/pipewire.make +++ b/rules/pipewire.make @@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_PIPEWIRE) += pipewire # # Paths and names # -PIPEWIRE_VERSION := 0.3.40 -PIPEWIRE_MD5 := 6a9fd25a010ed6113cb71f29ba2b1f84 +PIPEWIRE_VERSION := 0.3.42 +PIPEWIRE_MD5 := 545440bda38b596d2879f8fd8bbc703e PIPEWIRE := pipewire-$(PIPEWIRE_VERSION) PIPEWIRE_SUFFIX := tar.bz2 PIPEWIRE_URL := https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/$(PIPEWIRE_VERSION)/$(PIPEWIRE).$(PIPEWIRE_SUFFIX) @@ -70,11 +70,13 @@ PIPEWIRE_CONF_OPT := \ -Dlibpulse=disabled \ -Dlibusb=disabled \ -Dlibv4l2-path= \ + -Dlv2=disabled \ -Dman=disabled \ -Dpipewire-alsa=enabled \ -Dpipewire-jack=disabled \ -Dpipewire-v4l2=enabled \ -Dpw-cat=enabled \ + -Draop=disabled \ -Droc=disabled \ -Dsdl2=disabled \ -Dsession-managers= \ -- 2.30.2 _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
* [ptxdist] [PATCH v2 2/2] pipewire: allow to enable RAOP module 2021-12-16 10:14 [ptxdist] [PATCH v2 1/2] pipewire: version bump 0.3.40 -> 0.3.42 Philipp Zabel @ 2021-12-16 10:14 ` Philipp Zabel 2021-12-17 13:27 ` [ptxdist] [APPLIED] " Michael Olbrich 2021-12-17 13:27 ` [ptxdist] [APPLIED] pipewire: version bump 0.3.40 -> 0.3.42 Michael Olbrich 1 sibling, 1 reply; 4+ messages in thread From: Philipp Zabel @ 2021-12-16 10:14 UTC (permalink / raw) To: ptxdist Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> --- rules/pipewire.in | 5 +++++ rules/pipewire.make | 8 +++++--- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/rules/pipewire.in b/rules/pipewire.in index 6f8a75276b13..f0a94cab2476 100644 --- a/rules/pipewire.in +++ b/rules/pipewire.in @@ -15,6 +15,7 @@ menuconfig PIPEWIRE select READLINE if PIPEWIRE_PW_CTL select NCURSES if PIPEWIRE_PW_TOP select NCURSES_WIDE_CHAR if PIPEWIRE_PW_TOP + select OPENSSL if PIPEWIRE_RAOP select SYSTEMD if PIPEWIRE_SYSTEMD select UDEV select UDEV_LIBUDEV @@ -48,6 +49,10 @@ config PIPEWIRE_PULSEAUDIO bool prompt "install pulseaudio compatibility service" +config PIPEWIRE_RAOP + bool + prompt "enable Remote Audio Output Protocol module" + config PIPEWIRE_SYSTEMD_UNIT bool default y diff --git a/rules/pipewire.make b/rules/pipewire.make index aaf63ece7a48..629d065db74e 100644 --- a/rules/pipewire.make +++ b/rules/pipewire.make @@ -76,7 +76,7 @@ PIPEWIRE_CONF_OPT := \ -Dpipewire-jack=disabled \ -Dpipewire-v4l2=enabled \ -Dpw-cat=enabled \ - -Draop=disabled \ + -Draop=$(call ptx/endis,PTXCONF_PIPEWIRE_RAOP)d \ -Droc=disabled \ -Dsdl2=disabled \ -Dsession-managers= \ @@ -103,7 +103,7 @@ PIPEWIRE_CPPFLAGS = -isystem $(KERNEL_HEADERS_INCLUDE_DIR) # Target-Install # ---------------------------------------------------------------------------- -PIPEWIRE_MODULES := \ +PIPEWIRE_MODULES-y := \ access \ adapter \ client-device \ @@ -125,6 +125,8 @@ PIPEWIRE_MODULES := \ spa-node \ spa-node-factory +PIPEWIRE_MODULES-$(PTXCONF_PIPEWIRE_RAOP) += raop-sink + PIPEWIRE_SPA_MODULES := \ alsa/libspa-alsa \ audiomixer/libspa-audiomixer \ @@ -181,7 +183,7 @@ endif @$(call install_link, pipewire, pw-cat, /usr/bin/pw-play) @$(call install_link, pipewire, pw-cat, /usr/bin/pw-record) - @$(foreach module, $(PIPEWIRE_MODULES), \ + @$(foreach module, $(PIPEWIRE_MODULES-y), \ $(call install_lib, pipewire, 0, 0, 644, \ pipewire-0.3/libpipewire-module-$(module))$(ptx/nl)) -- 2.30.2 _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ptxdist] [APPLIED] pipewire: allow to enable RAOP module 2021-12-16 10:14 ` [ptxdist] [PATCH v2 2/2] pipewire: allow to enable RAOP module Philipp Zabel @ 2021-12-17 13:27 ` Michael Olbrich 0 siblings, 0 replies; 4+ messages in thread From: Michael Olbrich @ 2021-12-17 13:27 UTC (permalink / raw) To: ptxdist; +Cc: Philipp Zabel Thanks, applied as 9aaaf03e40ac99c7c1b2e06438e681dffae431d0. Michael [sent from post-receive hook] On Fri, 17 Dec 2021 14:27:08 +0100, Philipp Zabel <p.zabel@pengutronix.de> wrote: > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> > Message-Id: <20211216101442.2704994-2-p.zabel@pengutronix.de> > Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> > > diff --git a/rules/pipewire.in b/rules/pipewire.in > index 6f8a75276b13..f0a94cab2476 100644 > --- a/rules/pipewire.in > +++ b/rules/pipewire.in > @@ -15,6 +15,7 @@ menuconfig PIPEWIRE > select READLINE if PIPEWIRE_PW_CTL > select NCURSES if PIPEWIRE_PW_TOP > select NCURSES_WIDE_CHAR if PIPEWIRE_PW_TOP > + select OPENSSL if PIPEWIRE_RAOP > select SYSTEMD if PIPEWIRE_SYSTEMD > select UDEV > select UDEV_LIBUDEV > @@ -48,6 +49,10 @@ config PIPEWIRE_PULSEAUDIO > bool > prompt "install pulseaudio compatibility service" > > +config PIPEWIRE_RAOP > + bool > + prompt "enable Remote Audio Output Protocol module" > + > config PIPEWIRE_SYSTEMD_UNIT > bool > default y > diff --git a/rules/pipewire.make b/rules/pipewire.make > index aaf63ece7a48..629d065db74e 100644 > --- a/rules/pipewire.make > +++ b/rules/pipewire.make > @@ -76,7 +76,7 @@ PIPEWIRE_CONF_OPT := \ > -Dpipewire-jack=disabled \ > -Dpipewire-v4l2=enabled \ > -Dpw-cat=enabled \ > - -Draop=disabled \ > + -Draop=$(call ptx/endis,PTXCONF_PIPEWIRE_RAOP)d \ > -Droc=disabled \ > -Dsdl2=disabled \ > -Dsession-managers= \ > @@ -103,7 +103,7 @@ PIPEWIRE_CPPFLAGS = -isystem $(KERNEL_HEADERS_INCLUDE_DIR) > # Target-Install > # ---------------------------------------------------------------------------- > > -PIPEWIRE_MODULES := \ > +PIPEWIRE_MODULES-y := \ > access \ > adapter \ > client-device \ > @@ -125,6 +125,8 @@ PIPEWIRE_MODULES := \ > spa-node \ > spa-node-factory > > +PIPEWIRE_MODULES-$(PTXCONF_PIPEWIRE_RAOP) += raop-sink > + > PIPEWIRE_SPA_MODULES := \ > alsa/libspa-alsa \ > audiomixer/libspa-audiomixer \ > @@ -181,7 +183,7 @@ endif > @$(call install_link, pipewire, pw-cat, /usr/bin/pw-play) > @$(call install_link, pipewire, pw-cat, /usr/bin/pw-record) > > - @$(foreach module, $(PIPEWIRE_MODULES), \ > + @$(foreach module, $(PIPEWIRE_MODULES-y), \ > $(call install_lib, pipewire, 0, 0, 644, \ > pipewire-0.3/libpipewire-module-$(module))$(ptx/nl)) > _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ptxdist] [APPLIED] pipewire: version bump 0.3.40 -> 0.3.42 2021-12-16 10:14 [ptxdist] [PATCH v2 1/2] pipewire: version bump 0.3.40 -> 0.3.42 Philipp Zabel 2021-12-16 10:14 ` [ptxdist] [PATCH v2 2/2] pipewire: allow to enable RAOP module Philipp Zabel @ 2021-12-17 13:27 ` Michael Olbrich 1 sibling, 0 replies; 4+ messages in thread From: Michael Olbrich @ 2021-12-17 13:27 UTC (permalink / raw) To: ptxdist; +Cc: Philipp Zabel Thanks, applied as f6436850a008d547b599f333cad325bbcb174b34. Michael [sent from post-receive hook] On Fri, 17 Dec 2021 14:27:07 +0100, Philipp Zabel <p.zabel@pengutronix.de> wrote: > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> > Message-Id: <20211216101442.2704994-1-p.zabel@pengutronix.de> > Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> > > diff --git a/rules/pipewire.make b/rules/pipewire.make > index 730f79cc3c57..aaf63ece7a48 100644 > --- a/rules/pipewire.make > +++ b/rules/pipewire.make > @@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_PIPEWIRE) += pipewire > # > # Paths and names > # > -PIPEWIRE_VERSION := 0.3.40 > -PIPEWIRE_MD5 := 6a9fd25a010ed6113cb71f29ba2b1f84 > +PIPEWIRE_VERSION := 0.3.42 > +PIPEWIRE_MD5 := 545440bda38b596d2879f8fd8bbc703e > PIPEWIRE := pipewire-$(PIPEWIRE_VERSION) > PIPEWIRE_SUFFIX := tar.bz2 > PIPEWIRE_URL := https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/$(PIPEWIRE_VERSION)/$(PIPEWIRE).$(PIPEWIRE_SUFFIX) > @@ -70,11 +70,13 @@ PIPEWIRE_CONF_OPT := \ > -Dlibpulse=disabled \ > -Dlibusb=disabled \ > -Dlibv4l2-path= \ > + -Dlv2=disabled \ > -Dman=disabled \ > -Dpipewire-alsa=enabled \ > -Dpipewire-jack=disabled \ > -Dpipewire-v4l2=enabled \ > -Dpw-cat=enabled \ > + -Draop=disabled \ > -Droc=disabled \ > -Dsdl2=disabled \ > -Dsession-managers= \ _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-12-17 13:27 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-12-16 10:14 [ptxdist] [PATCH v2 1/2] pipewire: version bump 0.3.40 -> 0.3.42 Philipp Zabel 2021-12-16 10:14 ` [ptxdist] [PATCH v2 2/2] pipewire: allow to enable RAOP module Philipp Zabel 2021-12-17 13:27 ` [ptxdist] [APPLIED] " Michael Olbrich 2021-12-17 13:27 ` [ptxdist] [APPLIED] pipewire: version bump 0.3.40 -> 0.3.42 Michael Olbrich
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox