From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: Roland Hieber <rhi@pengutronix.de>
Subject: Re: [ptxdist] [PATCH 1/2] bind: new package
Date: Fri, 21 May 2021 12:01:22 +0200 [thread overview]
Message-ID: <20210521100122.GB3634306@pengutronix.de> (raw)
In-Reply-To: <20210517205908.5785-1-rhi@pengutronix.de>
On Mon, May 17, 2021 at 10:59:07PM +0200, Roland Hieber wrote:
> Newer ISC DHCP versions try to build a packaged BIND library, but fail
> at it. Outsource the BIND libs into an extra recipe so we can set the
> configure options and BUILD_CC appropriately. This package only builds
> the static BIND libraries for now, which is all that is needed by the
> DHCP package.
ptxdist: error:
checksum of license file '.../platform-arm-hf/build-target/bind-9.11.31/COPYRIGHT'
changed: 8f17f64e47e83b60cd920a1e4b54419e -> b88e7ca5f21908e1b2720169f6807cf6
Michael
>
> Signed-off-by: Roland Hieber <rhi@pengutronix.de>
> ---
> rules/bind.in | 10 ++++
> rules/bind.make | 138 ++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 148 insertions(+)
> create mode 100644 rules/bind.in
> create mode 100644 rules/bind.make
>
> diff --git a/rules/bind.in b/rules/bind.in
> new file mode 100644
> index 000000000000..25df3a4793ed
> --- /dev/null
> +++ b/rules/bind.in
> @@ -0,0 +1,10 @@
> +## SECTION=project_specific
> +
> +config BIND
> + tristate
> + prompt "bind"
> + help
> + The ISC BIND nameserver
> +
> + Currently only used as a library dependency for ISC DHCP, no binaries
> + are installed to the target.
> diff --git a/rules/bind.make b/rules/bind.make
> new file mode 100644
> index 000000000000..c77e20eb1950
> --- /dev/null
> +++ b/rules/bind.make
> @@ -0,0 +1,138 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2021 by Roland Hieber, Pengutronix <rhi@pengutronix.de>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_BIND) += bind
> +
> +#
> +# Paths and names
> +#
> +BIND_VERSION := 9.11.31
> +BIND_MD5 := 40732ca6e4fcc9d022ab0f17b3e55b71
> +BIND := bind-$(BIND_VERSION)
> +BIND_SUFFIX := tar.gz
> +BIND_URL := https://ftp.isc.org/isc/bind9/$(BIND_VERSION)/$(BIND).$(BIND_SUFFIX)
> +BIND_SOURCE := $(SRCDIR)/$(BIND).$(BIND_SUFFIX)
> +BIND_DIR := $(BUILDDIR)/$(BIND)
> +BIND_LICENSE := MPL-2.0 AND ISC AND BSD-3-Clause AND BSD-2-Clause \
> + AND unknown AND JPNIC AND RSA-MD AND OpenSSL AND Apache-2.0
> +BIND_LICENSE_FILES := \
> + file://LICENSE;md5=f27a50d2e878867827842f2c60e30bfc \
> + file://COPYRIGHT;md5=8f17f64e47e83b60cd920a1e4b54419e
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +BIND_CONF_ENV := \
> + $(CROSS_ENV) \
> + BUILD_CC=$(PTXCONF_SETUP_HOST_CC)
> +
> +#
> +# autoconf
> +#
> +BIND_CONF_TOOL := autoconf
> +
> +# broken options: --disable-afl
> +BIND_CONF_OPT := \
> + $(CROSS_AUTOCONF_USR) \
> + --disable-libbind \
> + --enable-buffer-useinline \
> + --disable-warn-shadow \
> + --disable-warn-error \
> + --disable-developer \
> + --disable-seccomp \
> + --disable-kqueue \
> + --disable-epoll \
> + --disable-devpoll \
> + --disable-threads \
> + --disable-native-pkcs11 \
> + --disable-openssl-hash \
> + $(GLOBAL_LARGE_FILE_OPTION) \
> + --disable-backtrace \
> + --disable-symtable \
> + --$(call ptx/endis, PTXCONF_GLOBAL_IPV6)-ipv6 \
> + --disable-tcp-fastopen \
> + --enable-getifaddrs \
> + --disable-chroot \
> + --disable-linux-caps \
> + --enable-atomic \
> + --disable-fixed-rrset \
> + --enable-rpz-nsip \
> + --enable-rpz-nsdname \
> + --disable-filter-aaaa \
> + --disable-dnstap \
> + --disable-querytrace \
> + --enable-full-report \
> + --without-python \
> + --without-python-install-dir \
> + --without-geoip \
> + --without-geoip2 \
> + --without-gssapi \
> + --with-randomdev=/dev/zero \
> + --with-locktype=standard \
> + --without-libtool \
> + --without-openssl \
> + --without-pkcs11 \
> + --without-ecdsa \
> + --without-gost \
> + --without-eddsa \
> + --without-aes \
> + --without-lmdb \
> + --without-libxml2 \
> + --without-libjson \
> + --without-zlib \
> + --without-purify \
> + --without-gperftools-profiler \
> + --without-kame \
> + --without-readline \
> + --without-protobuf-c \
> + --without-libfstrm \
> + --without-docbook-xsl \
> + --without-idnkit \
> + --without-iconv \
> + --without-idnlib \
> + --without-libidn2 \
> + --without-cmocka \
> + --without-tuning \
> + --without-dlopen \
> + --without-dlz-postgres \
> + --without-dlz-mysql \
> + --without-dlz-bdb \
> + --without-dlz-filesystem \
> + --without-dlz-ldap \
> + --without-dlz-odbc \
> + --without-dlz-stub \
> + --without-make-clean
> +
> +# ----------------------------------------------------------------------------
> +# Compile
> +# ----------------------------------------------------------------------------
> +
> +# only build the static libraries for now
> +BIND_MAKE_OPT := -C lib
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +# only install the static libraries for now
> +BIND_INSTALL_OPT := -C lib install
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/bind.targetinstall:
> + @$(call targetinfo)
> + # empty, only static libraries are built
> + @$(call touch)
> +
> +# vim: syntax=make
> --
> 2.29.2
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
next prev parent reply other threads:[~2021-05-21 10:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-17 20:59 Roland Hieber
2021-05-17 20:59 ` [ptxdist] [PATCH 2/2] dhcp: version bump 4.1.2 -> 4.4.2 Roland Hieber
2021-05-17 21:02 ` Roland Hieber
2021-05-21 10:01 ` Michael Olbrich [this message]
2021-05-24 18:37 ` [ptxdist] [PATCH 1/2] bind: new package Roland Hieber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210521100122.GB3634306@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
--cc=rhi@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox