From: Roland Hieber <rhi@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: Roland Hieber <rhi@pengutronix.de>
Subject: [ptxdist] [PATCH 1/2] bind: new package
Date: Mon, 17 May 2021 22:59:07 +0200 [thread overview]
Message-ID: <20210517205908.5785-1-rhi@pengutronix.de> (raw)
Newer ISC DHCP versions try to build a packaged BIND library, but fail
at it. Outsource the BIND libs into an extra recipe so we can set the
configure options and BUILD_CC appropriately. This package only builds
the static BIND libraries for now, which is all that is needed by the
DHCP package.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
rules/bind.in | 10 ++++
rules/bind.make | 138 ++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 148 insertions(+)
create mode 100644 rules/bind.in
create mode 100644 rules/bind.make
diff --git a/rules/bind.in b/rules/bind.in
new file mode 100644
index 000000000000..25df3a4793ed
--- /dev/null
+++ b/rules/bind.in
@@ -0,0 +1,10 @@
+## SECTION=project_specific
+
+config BIND
+ tristate
+ prompt "bind"
+ help
+ The ISC BIND nameserver
+
+ Currently only used as a library dependency for ISC DHCP, no binaries
+ are installed to the target.
diff --git a/rules/bind.make b/rules/bind.make
new file mode 100644
index 000000000000..c77e20eb1950
--- /dev/null
+++ b/rules/bind.make
@@ -0,0 +1,138 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2021 by Roland Hieber, Pengutronix <rhi@pengutronix.de>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_BIND) += bind
+
+#
+# Paths and names
+#
+BIND_VERSION := 9.11.31
+BIND_MD5 := 40732ca6e4fcc9d022ab0f17b3e55b71
+BIND := bind-$(BIND_VERSION)
+BIND_SUFFIX := tar.gz
+BIND_URL := https://ftp.isc.org/isc/bind9/$(BIND_VERSION)/$(BIND).$(BIND_SUFFIX)
+BIND_SOURCE := $(SRCDIR)/$(BIND).$(BIND_SUFFIX)
+BIND_DIR := $(BUILDDIR)/$(BIND)
+BIND_LICENSE := MPL-2.0 AND ISC AND BSD-3-Clause AND BSD-2-Clause \
+ AND unknown AND JPNIC AND RSA-MD AND OpenSSL AND Apache-2.0
+BIND_LICENSE_FILES := \
+ file://LICENSE;md5=f27a50d2e878867827842f2c60e30bfc \
+ file://COPYRIGHT;md5=8f17f64e47e83b60cd920a1e4b54419e
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+BIND_CONF_ENV := \
+ $(CROSS_ENV) \
+ BUILD_CC=$(PTXCONF_SETUP_HOST_CC)
+
+#
+# autoconf
+#
+BIND_CONF_TOOL := autoconf
+
+# broken options: --disable-afl
+BIND_CONF_OPT := \
+ $(CROSS_AUTOCONF_USR) \
+ --disable-libbind \
+ --enable-buffer-useinline \
+ --disable-warn-shadow \
+ --disable-warn-error \
+ --disable-developer \
+ --disable-seccomp \
+ --disable-kqueue \
+ --disable-epoll \
+ --disable-devpoll \
+ --disable-threads \
+ --disable-native-pkcs11 \
+ --disable-openssl-hash \
+ $(GLOBAL_LARGE_FILE_OPTION) \
+ --disable-backtrace \
+ --disable-symtable \
+ --$(call ptx/endis, PTXCONF_GLOBAL_IPV6)-ipv6 \
+ --disable-tcp-fastopen \
+ --enable-getifaddrs \
+ --disable-chroot \
+ --disable-linux-caps \
+ --enable-atomic \
+ --disable-fixed-rrset \
+ --enable-rpz-nsip \
+ --enable-rpz-nsdname \
+ --disable-filter-aaaa \
+ --disable-dnstap \
+ --disable-querytrace \
+ --enable-full-report \
+ --without-python \
+ --without-python-install-dir \
+ --without-geoip \
+ --without-geoip2 \
+ --without-gssapi \
+ --with-randomdev=/dev/zero \
+ --with-locktype=standard \
+ --without-libtool \
+ --without-openssl \
+ --without-pkcs11 \
+ --without-ecdsa \
+ --without-gost \
+ --without-eddsa \
+ --without-aes \
+ --without-lmdb \
+ --without-libxml2 \
+ --without-libjson \
+ --without-zlib \
+ --without-purify \
+ --without-gperftools-profiler \
+ --without-kame \
+ --without-readline \
+ --without-protobuf-c \
+ --without-libfstrm \
+ --without-docbook-xsl \
+ --without-idnkit \
+ --without-iconv \
+ --without-idnlib \
+ --without-libidn2 \
+ --without-cmocka \
+ --without-tuning \
+ --without-dlopen \
+ --without-dlz-postgres \
+ --without-dlz-mysql \
+ --without-dlz-bdb \
+ --without-dlz-filesystem \
+ --without-dlz-ldap \
+ --without-dlz-odbc \
+ --without-dlz-stub \
+ --without-make-clean
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+# only build the static libraries for now
+BIND_MAKE_OPT := -C lib
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+# only install the static libraries for now
+BIND_INSTALL_OPT := -C lib install
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/bind.targetinstall:
+ @$(call targetinfo)
+ # empty, only static libraries are built
+ @$(call touch)
+
+# vim: syntax=make
--
2.29.2
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
next reply other threads:[~2021-05-17 21:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-17 20:59 Roland Hieber [this message]
2021-05-17 20:59 ` [ptxdist] [PATCH 2/2] dhcp: version bump 4.1.2 -> 4.4.2 Roland Hieber
2021-05-17 21:02 ` Roland Hieber
2021-05-21 10:01 ` [ptxdist] [PATCH 1/2] bind: new package Michael Olbrich
2021-05-24 18:37 ` Roland Hieber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210517205908.5785-1-rhi@pengutronix.de \
--to=rhi@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox