mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
* [ptxdist] Mini2440 not mounting
@ 2012-12-21 11:28 Ruben Louw
  0 siblings, 0 replies; 4+ messages in thread
From: Ruben Louw @ 2012-12-21 11:28 UTC (permalink / raw)
  To: ptxdist


[-- Attachment #1.1: Type: text/plain, Size: 2206 bytes --]

Hi Everyone

I have, what it seems, a problem with my mini2440 in that its not mounting
to my host, I think I might be missing some settings and if anyone can
correct me I'd really appreciate it. I'm using a Mini2440 1gig nand.

I have the following:

1. Using BSP and ptxdist versions 2012.12.0.

2. my host network setup is : a) Address  - 192.168.1.7
                                           b) Netmask - 255.255.255.0
                                           c) Gateway - 192.168.1.2

3. my target network setup is : a) Address  - 192.168.1.27
                                             b) Netmask -  255.255.255.0
                                             c) Gateway -  192.168.1.2
                                             d) ethaddr -
00:04:f3:00:06:35
                                             e) Serverip -    192.168.1.7

4. I have NFS on my host, not sure if i should use NFS or TFTP and not sure
what the difference is, if any.

5. The log from my mini2440 serial output:

6. I did not run ptxdist platformconfig, because I don not fully understand
what the image has to be. Do I have to run this and select an image, if so,
what image should i use?

7. I do not know where the mini would mount to, maybe that is the main
issue. In the docs its written that the tftp server is /tftpboot, but I
dont have a directory like that anywhere.

8. I made some changes to the
"configs/platform-friendlyarm-mini2440/barebox-128m-env/config" like
changing the autoboot timeout, but when I run go 0x31000000, it boots and
uses default 3 second timeout.

9. I am not sure what the nfsroot setting should be, and when I change it,
it defaults to what it was:

        if [ -n $user]; then
                                 nfsroot =
"${eth0.serverip}:/home/${user}/nfsroot/${machine}"

        else
                  nfsroot = "/path/to/nfs/root"

10. I do not receive any errors as my bootup log shows, yet i can not copy
the barebox image from the board support package to the directory ised by
the tftp server "cp platform-mini2440/images/barebox-image
/tftpboot/barebox-mini2440" because the directory
/tftpboot/barebox-mini2440 does not exist.

thank you for any help

Regards

Ruben Louw

[-- Attachment #1.2: Type: text/html, Size: 2422 bytes --]

[-- Attachment #2: Mini2440 serial output --]
[-- Type: application/octet-stream, Size: 2972 bytes --]

##### FriendlyARM BIOS 2.0 for 2440 #####
[x] format NAND FLASH for Linux
[v] Download vivi 
[k] Download linux kernel 
[y] Download root_yaffs image 
[a] Absolute User Application
[n] Download Nboot for WinCE 
[l] Download WinCE boot-logo
[w] Download WinCE NK.bin 
[d] Download & Run 
[z] Download zImage into RAM 
[g] Boot linux from RAM 
[f] Format the nand flash 
[b] Boot the system 
[s] Set the boot parameters 
[u] Backup NAND Flash to HOST through USB(upload) 
[r] Restore NAND Flash from HOST through USB 
[q] Goto shell of vivi 
[i] Version: 1138-2K
Enter your selection: q
Supervivi> go 0x31000000
go to 0x31000000                                                                
  argument 0 = 0x00000000                                                       
  argument 1 = 0x00000000                                                       
  argument 2 = 0x00000000                                                       
  argument 3 = 0x00000000                                                       
                                                                                
                                                                                
barebox 2011.05.0-ptx-2012.12.0 (Dec 21 2012 - 08:09:20)                        
                                                                                
Board: Mini 2440                                                                
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
Bad block table found at page 524224, version 0x01                              
Bad block table found at page 524160, version 0x01                              
nand_read_bbt: Bad block at 0x394e0000                                          
dm9000 i/o: 0x20000300, id: 0x90000a46                                          
eth@eth0: got MAC address from EEPROM: 00:00:00:00:00:00                        
refclk:    12000 kHz                                                            
mpll:     405000 kHz                                                            
upll:      48000 kHz                                                            
fclk:     405000 kHz                                                            
hclk:     101250 kHz                                                            
pclk:      50625 kHz                                                            
SDRAM1:   CL4@101MHz                                                            
SDRAM2:   CL4@101MHz                                                            
Malloc space: 0x33a00000 -> 0x33e00000 (size  4 MB)                             
Stack space : 0x339f8000 -> 0x33a00000 (size 32 kB)                             
running /env/bin/init...                                                        
                                                                                
Hit any key to stop autoboot:  2                                                
mini2440:/ 


[-- Attachment #3: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2012-12-24  7:17 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <CAOP6b3j0BVJwoF7p0w079pZ@mail.gmail.com>
2012-12-22 23:02 ` [ptxdist] Mini2440 not mounting Dave Festing
2012-12-22 23:14   ` Dave Festing
2012-12-24  7:17     ` Ruben Louw
2012-12-21 11:28 Ruben Louw

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox