* [ptxdist] CRA and SBOM
@ 2025-04-25 13:09 Ralf Glaser
2025-04-26 10:27 ` Michael Olbrich
0 siblings, 1 reply; 3+ messages in thread
From: Ralf Glaser @ 2025-04-25 13:09 UTC (permalink / raw)
To: ptxdist
Hi @all,
will there be any support for SBOM generation in ptxdist (as we are all required by the CRA to provide this)?
Best regards,
Ralf
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ptxdist] CRA and SBOM
2025-04-25 13:09 [ptxdist] CRA and SBOM Ralf Glaser
@ 2025-04-26 10:27 ` Michael Olbrich
[not found] ` <BEZP281MB336182C51FD06106E8E2F560A5812@BEZP281MB3361.DEUP281.PROD.OUTLOOK.COM>
0 siblings, 1 reply; 3+ messages in thread
From: Michael Olbrich @ 2025-04-26 10:27 UTC (permalink / raw)
To: Ralf Glaser; +Cc: ptxdist
On Fri, Apr 25, 2025 at 01:09:52PM +0000, Ralf Glaser wrote:
> will there be any support for SBOM generation in ptxdist (as we are all
> required by the CRA to provide this)?
PTXdist has support to generate SBoMs. It's just not really documented.
Set PROJECT_DEFAULT_REPORTS to "spdx-sbom" and either enable
PROJECT_GENERATE_REPORTS to generate the SBoM when images are built or run
"ptxdist make image-reports" to generate them manually.
Michael
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ptxdist] CRA and SBOM
[not found] ` <BEZP281MB336182C51FD06106E8E2F560A5812@BEZP281MB3361.DEUP281.PROD.OUTLOOK.COM>
@ 2025-04-29 4:46 ` Thorsten Scherer
0 siblings, 0 replies; 3+ messages in thread
From: Thorsten Scherer @ 2025-04-29 4:46 UTC (permalink / raw)
To: Ralf Glaser; +Cc: ptxdist
Under 'Project Configuration' in ptxdist menuconfig. Availible since
ptxdist-2025.02.0 .
LG
Thorsten
On Mon, Apr 28, 2025 at 02:03:28PM +0000, Ralf Glaser wrote:
> That sounds great, but where do I set PROJECT_DEFAULT_REPORTS?
>
> Ralf
>
> ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
> Von: Michael Olbrich <m.olbrich@pengutronix.de>
> Gesendet: Samstag, 26. April 2025 12:27
> An: Ralf Glaser <glaser@iotmaxx.de>
> Cc: ptxdist@pengutronix.de <ptxdist@pengutronix.de>
> Betreff: Re: [ptxdist] CRA and SBOM
>
> On Fri, Apr 25, 2025 at 01:09:52PM +0000, Ralf Glaser wrote:
> > will there be any support for SBOM generation in ptxdist (as we are all
> > required by the CRA to provide this)?
>
> PTXdist has support to generate SBoMs. It's just not really documented.
>
> Set PROJECT_DEFAULT_REPORTS to "spdx-sbom" and either enable
> PROJECT_GENERATE_REPORTS to generate the SBoM when images are built or run
> "ptxdist make image-reports" to generate them manually.
>
> Michael
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-04-29 4:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-04-25 13:09 [ptxdist] CRA and SBOM Ralf Glaser
2025-04-26 10:27 ` Michael Olbrich
[not found] ` <BEZP281MB336182C51FD06106E8E2F560A5812@BEZP281MB3361.DEUP281.PROD.OUTLOOK.COM>
2025-04-29 4:46 ` Thorsten Scherer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox