mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Guillermo Rodriguez Garcia <guille.rodriguez@gmail.com>,
	ptxdist@pengutronix.de
Cc: Alejandro Vazquez <avazquez.dev@gmail.com>
Subject: Re: [ptxdist] [PATCH v2] tf-a: new package for ARM trusted firmware A
Date: Thu, 13 Feb 2020 14:30:57 +0100	[thread overview]
Message-ID: <c709756e-d494-b9a7-e575-199b70bdbd1c@pengutronix.de> (raw)
In-Reply-To: <CABDcavZM6cGP_pKuP5vncYR-=HiP9a2c0iCkS=3dL5WVSKVeOw@mail.gmail.com>

On 2/13/20 1:59 PM, Guillermo Rodriguez Garcia wrote:
> Hi Ahmad,
> 
> El mié., 12 feb. 2020 a las 17:40, Ahmad Fatoum
> (<a.fatoum@pengutronix.de>) escribió:
>>
>> Trusted Firmware-A (TF-A) is a reference implementation of secure world
>> software for Arm A-Profile architectures (Armv8-A and Armv7-A).
>>
>> Cc: Alejandro Vazquez <avazquez.dev@gmail.com>
>> Signed-off-by: Rouven Czerwinski <rouven@czerwinskis.de>
>> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
>> ---
>> v1 -> v2:
>>  - Made TF_A_ARCH_MAJOR configurable to support 32 bit ARMv8 (Guillermo)
>>  - Replaces stm32mp-specific TF_A_DTB with TF_A_EXTRA_ARGS to contain
>>    all board/vendor specific options
>>  - removed reference to no longer existing CREDITS file
>>  - removed TF_A_MAKE_OPT contents that are set elsewhere
>>  - reduced uses of += in favor of directly appending to the string
>>  - delete old build directory in prepare instead of compile
>>  - use default compile stage (Guillermo)
>>  - install artifacts to sysroot /usr/lib/firmware in install stage
>>  - install artifacts to IMAGEDIR in targetinstall
>>  - fix clean stage to delete proper artifacts
>> ---
>>  platforms/tf-a.in | 138 ++++++++++++++++++++++++++++++++++++++++++++++
>>  rules/tf-a.make   | 114 ++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 252 insertions(+)
>>  create mode 100644 platforms/tf-a.in
>>  create mode 100644 rules/tf-a.make
>>
>> diff --git a/platforms/tf-a.in b/platforms/tf-a.in
>> new file mode 100644
>> index 000000000000..f3971c4c2a3a
>> --- /dev/null
>> +++ b/platforms/tf-a.in
>> @@ -0,0 +1,138 @@
>> +## SECTION=bootloader
>> +
>> +menuconfig TF_A
>> +       select BOOTLOADER
>> +       prompt "ARM Trusted Firmware-A"
>> +       depends on ARCH_ARM || ARCH_ARM64
>> +       bool
>> +
>> +if TF_A
>> +
>> +config TF_A_ARCH_STRING
>> +        string
>> +        default "aarch32" if ARCH_ARM
>> +        default "aarch64" if ARCH_ARM64
>> +
>> +choice
>> +       prompt "TF-A Architecture"
>> +       default TF_A_ARM_ARCH_MAJOR_7 if ARCH_ARM
>> +       default TF_A_ARM_ARCH_MAJOR_8 if ARCH_ARM64
>> +       help
>> +         Architecture version major number
>> +
>> +       config TF_A_ARM_ARCH_MAJOR_7
>> +               depends on ARCH_ARM
>> +               prompt "ARMv7"
>> +               bool
>> +
>> +       config TF_A_ARM_ARCH_MAJOR_8_32_BIT
>> +               depends on ARCH_ARM
>> +               prompt "ARMv8 32-bit"
>> +               bool
>> +
>> +       config TF_A_ARM_ARCH_MAJOR_8
>> +               depends on ARCH_ARM64
>> +               prompt "ARMv8"
>> +               bool
>> +
>> +endchoice
>> +
>> +config TF_A_ARM_ARCH_MAJOR
>> +        int
>> +        default 7 if TF_A_ARM_ARCH_MAJOR_7
>> +        default 8 if TF_A_ARM_ARCH_MAJOR_8_32_BIT
>> +        default 8 if TF_A_ARM_ARCH_MAJOR_8
>> +
>> +config TF_A_VERSION
>> +       string
>> +       default "v2.2"
>> +       prompt "TF-A version"
>> +       help
>> +         Enter the TF-A version you want to build. Usally something like "v2.2"
>> +
>> +config TF_A_MD5
>> +       string
>> +       default "bb300e5a62c911e189c80d935d497a4b"
>> +       prompt "TF-A source md5"
>> +
>> +config TF_A_PLATFORM
>> +       string
>> +       prompt "TF-A target platform"
>> +       help
>> +         The TF-A target platform.
>> +
>> +config TF_A_ARM_ARCH_MINOR
>> +       depends on TF_A_ARM_ARCH_MAJOR_8 || TF_A_ARM_ARCH_MAJOR_8_32_BIT
>> +       int
>> +       default 0
>> +       prompt "TF-A target ARMv8.MINOR version"
>> +       help
>> +         The minor version of the ARMv8 architecture targeted. Defaults to 0.
>> +
>> +config TF_A_EXTRA_ARGS
>> +       string
>> +       prompt "TF-A extra build arguments"
>> +       help
>> +         Extra platform-specific build arguments to pass to the TF-A build
>> +         process, e.g. DTB_FILE_NAME= for the stm32mp1
>> +
>> +config TF_A_ARTIFACTS
>> +       string
>> +       prompt "TF-A artifact file names"
>> +       default "bl2.bin"
>> +       help
>> +         A space-separated list of artifacts to copy to the image directory.
>> +         All file names are relative to the appropriate TF-A platform build
>> +         directory.
>> +
>> +comment "Payloads"
>> +
>> +choice
>> +       prompt "BL32 Payload"
>> +       default TF_A_BL32_NONE
>> +       help
>> +         payload for BL32 (Secure World OS)
>> +
>> +       config TF_A_BL32_NONE
>> +               prompt "None"
>> +               bool
>> +
>> +       config TF_A_BL32_SP_MIN
>> +               depends on ARCH_ARM
>> +               prompt "sp_min"
>> +               bool
>> +
>> +       config TF_A_BL32_TSP
>> +               depends on ARCH_ARM64
>> +               prompt "Test Secure Payload"
>> +               bool
>> +
>> +endchoice
>> +
>> +if TF_A_BL32_TSP
>> +choice TF_A_BL32_TSP_RAM_LOCATION
>> +       prompt "TSP location"
>> +       default TF_A_BL32_TSP_RAM_LOCATION_TSRAM
>> +
>> +       config TF_A_BL32_TSP_RAM_LOCATION_TSRAM
>> +               prompt "Trusted SRAM"
>> +               bool
>> +
>> +       config TF_A_BL32_TSP_RAM_LOCATION_TDRAM
>> +               prompt "Trusted DRAM (if available)"
>> +               bool
>> +
>> +       config TF_A_BL32_TSP_RAM_LOCATION_DRAM
>> +               prompt "Secure DRAM region (configured by TrustZone controller)"
>> +               bool
>> +endchoice
>> +
>> +config TF_A_BL32_TSP_RAM_LOCATION_STRING
>> +        string
>> +        default "tsram" if TF_A_BL32_TSP_RAM_LOCATION_TSRAM
>> +        default "tdram" if TF_A_BL32_TSP_RAM_LOCATION_TDRAM
>> +        default "dram"  if TF_A_BL32_TSP_RAM_LOCATION_DRAM
>> +
>> +endif
>> +
>> +endif
>> diff --git a/rules/tf-a.make b/rules/tf-a.make
>> new file mode 100644
>> index 000000000000..9f895d32518d
>> --- /dev/null
>> +++ b/rules/tf-a.make
>> @@ -0,0 +1,114 @@
>> +# -*-makefile-*-
>> +#
>> +# Copyright (C) 2018 by Rouven Czerwinski <r.czerwinski@pengutronix.de>
>> +#               2019 by Ahmad Fatoum <a.fatoum@pengutronix.de>
>> +#
>> +# For further information about the PTXdist project and license conditions
>> +# see the README file.
>> +#
>> +
>> +#
>> +# We provide this package
>> +#
>> +PACKAGES-$(PTXCONF_TF_A) += tf-a
>> +
>> +#
>> +# Paths and names
>> +#
>> +TF_A_VERSION   := $(call remove_quotes,$(PTXCONF_TF_A_VERSION))
>> +TF_A_MD5       := $(call remove_quotes,$(PTXCONF_TF_A_MD5))
>> +TF_A           := tf-a-$(TF_A_VERSION)
>> +TF_A_SUFFIX    := tar.gz
>> +TF_A_URL       := https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/snapshot/$(TF_A_VERSION).$(TF_A_SUFFIX)
>> +TF_A_SOURCE    := $(SRCDIR)/$(TF_A).$(TF_A_SUFFIX)
>> +TF_A_DIR       := $(BUILDDIR)/$(TF_A)
>> +TF_A_LICENSE    := BSD-3-Clause
>> +
>> +# ----------------------------------------------------------------------------
>> +# Prepare
>> +# ----------------------------------------------------------------------------
>> +
>> +TF_A_WRAPPER_BLACKLIST := \
>> +       TARGET_HARDEN_RELRO \
>> +       TARGET_HARDEN_BINDNOW \
>> +       TARGET_HARDEN_PIE \
>> +       TARGET_DEBUG \
>> +       TARGET_BUILD_ID
>> +
>> +TF_A_PATH      := PATH=$(CROSS_PATH)
>> +TF_A_MAKE_OPT  := \
>> +       CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE) \
>> +       HOSTCC=$(HOSTCC) \
>> +       PLAT=$(PTXCONF_TF_A_PLATFORM) \
>> +       DEBUG=$(call ptx/ifdef,TF_A_DEBUG,1,0) \
>> +       ARCH=$(PTXCONF_TF_A_ARCH_STRING) \
>> +       ARM_ARCH_MAJOR=$(PTXCONF_TF_A_ARM_ARCH_MAJOR) \
>> +       $(call remove_quotes,$(PTXCONF_TF_A_EXTRA_ARGS)) \
>> +       all
>> +
>> +ifdef PTXCONF_TF_A_BL32_TSP
>> +TF_A_MAKE_OPT += ARM_TSP_RAM_LOCATION=$(PTXCONF_TF_A_BL32_TSP_RAM_LOCATION_STRING)
>> +endif
>> +ifdef PTXCONF_TF_A_ARM_ARCH_MINOR
>> +TF_A_MAKE_OPT += ARM_ARCH_MINOR=$(PTXCONF_TF_A_ARM_ARCH_MINOR)
>> +endif
>> +ifdef PTXCONF_TF_A_BL32_SP_MIN
>> +TF_A_MAKE_OPT += AARCH32_SP=sp_min
>> +endif
>> +
>> +TF_A_BUILD_OUTPUT_DIR := $(call ptx/ifdef,TF_A_DEBUG,debug,release)
>> +TF_A_ARTIFACTS_DEST := $(call remove_quotes,$(PTXCONF_TF_A_ARTIFACTS))
>> +TF_A_ARTIFACTS_SRC := $(addprefix $(TF_A_DIR)/build/$(PTXCONF_TF_A_PLATFORM)/$(TF_A_BUILD_OUTPUT_DIR)/, \
>> +               $(TF_A_ARTIFACTS_DEST))
>> +TF_A_CONF_TOOL := NO
>> +TF_A_MAKE_ENV  := $(CROSS_ENV)
>> +# TF_A_DEBUG=yes
>> +
>> +# ----------------------------------------------------------------------------
>> +# Prepare
>> +# ----------------------------------------------------------------------------
>> +$(STATEDIR)/tf-a.prepare:
>> +       @$(call targetinfo)
>> +       @rm -rf $(TF_A_DIR)/build/
>> +       @$(call touch)
>> +
>> +# ----------------------------------------------------------------------------
>> +# Install
>> +# ----------------------------------------------------------------------------
>> +
>> +$(STATEDIR)/tf-a.install:
>> +       @$(call targetinfo)
>> +ifeq ($(TF_A_ARTIFACTS_SRC),)
>> +       $(warning TF_A_ARTIFACTS is empty. nothing to install.)
>> +else
>> +       @install -m644 -D \
>> +               --target-directory=$(PTXCONF_SYSROOT_TARGET)/usr/lib/firmware \
> 
> This doesn't look right.
> Shouldn't the install stage install things to the package install
> directory only?
> And, in case you want to install something somewhere else, shouldn't
> the actual target directory at least be configurable?
> For example there is no /usr/lib/firmware in my platform.

That's only in the sysroot for use by other rules (e.g. barebox embedding TF-A
on some i.MX8). It's not installed in the target rootfs.

> 
> Guillermo
> 
>> +               $(TF_A_ARTIFACTS_SRC)
>> +endif
>> +       @$(call touch)
>> +
>> +# ----------------------------------------------------------------------------
>> +# Target-Install
>> +# ----------------------------------------------------------------------------
>> +
>> +$(STATEDIR)/tf-a.targetinstall:
>> +       @$(call targetinfo)
>> +ifeq ($(TF_A_ARTIFACTS_SRC),)
>> +       $(warning TF_A_ARTIFACTS is empty. nothing to install.)
>> +else
>> +       @install -D -m644 $(TF_A_ARTIFACTS_SRC) $(IMAGEDIR)
>> +endif
>> +       @$(call touch)
>> +
>> +# ----------------------------------------------------------------------------
>> +# Clean
>> +# ----------------------------------------------------------------------------
>> +
>> +$(STATEDIR)/tf-a.clean:
>> +       @$(call targetinfo)
>> +       @$(call clean_pkg, TF_A)
>> +       @rm -f $(addprefix $(PTXCONF_SYSROOT_TARGET)/usr/lib/firmware/, \
>> +               TF_A_ARTIFACTS_DEST)
>> +       @rm -f $(addprefix $(IMAGEDIR), TF_A_ARTIFACTS_DEST)
>> +
>> +# vim: syntax=make
>> --
>> 2.25.0
>>
>>
>> _______________________________________________
>> ptxdist mailing list
>> ptxdist@pengutronix.de
> 
> 
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

  reply	other threads:[~2020-02-13 13:30 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-12 16:40 Ahmad Fatoum
2020-02-13 12:59 ` Guillermo Rodriguez Garcia
2020-02-13 13:30   ` Ahmad Fatoum [this message]
2020-02-13 14:25     ` Guillermo Rodriguez Garcia
2020-02-13 14:28       ` Ahmad Fatoum
2020-02-13 14:32         ` Ahmad Fatoum
2020-02-13 14:35           ` Guillermo Rodriguez Garcia
2020-02-13 14:44             ` Ahmad Fatoum
2020-02-13 14:49               ` Ahmad Fatoum
2020-02-13 15:05               ` Guillermo Rodriguez Garcia
2020-02-13 15:08                 ` Ahmad Fatoum
2020-02-13 15:24                   ` Guillermo Rodriguez Garcia
2020-02-13 15:27                     ` Ahmad Fatoum
2020-02-13 15:33                       ` Guillermo Rodriguez Garcia
2020-02-14 10:57                         ` Alex Vazquez
2020-02-14 13:19 ` Michael Olbrich
2020-02-19 10:10   ` Ahmad Fatoum
2020-02-17 16:25 ` Michael Tretter
2020-02-17 16:33   ` Guillermo Rodriguez Garcia
2020-02-18  7:35     ` Michael Olbrich
2020-02-18  9:02       ` Guillermo Rodriguez Garcia
2020-02-19  7:48         ` Michael Tretter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c709756e-d494-b9a7-e575-199b70bdbd1c@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=avazquez.dev@gmail.com \
    --cc=guille.rodriguez@gmail.com \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox