From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [ANNOUNCE] PTXdist 2025.11.0 released
Date: Fri, 7 Nov 2025 11:35:29 +0100 [thread overview]
Message-ID: <aQ3Lcbg5yC6CDwCv@pengutronix.de> (raw)
In-Reply-To: <aQ3LQNs9U2Yi2uxU@pengutronix.de>
On Fri, Nov 07, 2025 at 11:34:40AM +0100, Michael Olbrich wrote:
> I'm happy to announce that I've just released ptxdist-2025.10.0.
ptxdist-2025.11.0 of course as mentioned in the subject.
Michael
> It is a bigger release this time. There is one new feature: Package
> downloads from git URLs have gained optional support for git submodules.
> This can be enabled with the submodules=yes/recurse parameter to the URL.
> If it is enabled, then the generated tarball will include the sources for
> the submodules.
> And there are a few fixes to build things with gcc-15. Smaller BSPs can
> probably now be built with gcc-15 but it will be a while before all of
> PTXdist can be built with it.
>
> But what makes this release one of the bigger ones is a long list of
> version bumps.
> The rest are other small fixes and cleanups all over the place.
>
> Thanks to all contributors and - as always - the shortlog below.
>
> Enjoy,
> Michael Olbrich
>
>
> Alexander Dahl (8):
> libwebsockets: Reorder conf opts
> libwebsockets: Add conf opt to disable -Werror
> libwebsockets: Make shared library build explicit
> libwebsockets: Remove tests and examples from build
> libwebsockets: Pin down more conf opts
> libwebsockets: version bump 4.3.3 -> 4.4.1
> libwebsockets: Make roles configurable
> libwebsockets: Pin down higher level config options
>
> Artur Wiebe (1):
> python3-pymodbus: version bump 3.8.6 -> 3.11.2
>
> Christian Melki (22):
> iproute2: Version bump. 6.16.0 -> 6.17.0
> openssl: Version bump. 3.5.3 -> 3.5.4
> strace: Version bump. 6.16 -> 6.17
> libdrm: Version bump. 2.4.125 -> 2.4.126.
> openssh: Version bump. 10.0p2 -> 10.1p1
> hwdata: Version bump. 0.399 -> 0.400
> ca-certificates: Version bump. 3.113 -> 3.117
> nss: Version bump. 3.115.1 -> 3.117
> openssh: Version bump. 10.1p1 -> 10.2p1
> libxkbcommon: Version bump. 1.11.0 -> 1.12.0
> qemu: Version bump. 10.1.0 -> 10.1.1
> linux-firmware: Version bump. 20250917 -> 20251011
> crda: regdb version bump. 2024.07.04 -> 2025.10.07
> libdrm: Version bump. 2.4.126 -> 2.4.127
> libxkbcommon: Version bump. 1.12.0 -> 1.12.1
> libxml2: Version bump. 2.15.0 -> 2.15.1
> libevdev: Version bump. 1.13.4 -> 1.13.5
> glib: Version bump. 2.86.0 -> 2.86.1
> libinput: Version bump. 1.29.1 -> 1.29.2
> usbutils: Version bump. 018 -> 019
> pcre2: Version bump. 10.46 -> 10.47
> libcap: Version bump. 2.76 -> 2.77
>
> Fabian Pfitzner (2):
> openh264: new package
> gst-plugins-bad1: unbreak openh264 plugin
>
> Holger Assmann (1):
> ldd: switch to version provided by glibc
>
> Lars Alex Pedersen (2):
> sed: Version bump 4.8 -> 4.9
> htop: Version bump 3.0.1 -> 3.4.1
>
> Michael Olbrich (46):
> memtest: move to staging
> qt5: add patches to fix building with Python >= 3.12
> (host-)squashfs-tools: synchronize and fix rules
> qt5: drop old C++ standard hack
> samba: move to staging
> gobject-introspection: version bump 1.72.0 -> 1.86.0
> serdisplib: move to staging
> json-glib: version bump 1.8.0 -> 1.9.2
> libsolv: no sub-options so no menuconfig needed
> libsolv: avoid zlib dependency
> libmpeg2: fix URL
> tomoyo-tools: move to staging
> gstreamer1: version bump 1.26.6 -> 1.26.7
> gst-plugins-base1: version bump 1.26.6 -> 1.26.7
> gst-plugins-good1: version bump 1.26.6 -> 1.26.7
> gst-plugins-bad1: version bump 1.26.6 -> 1.26.7
> gst-plugins-ugly1: version bump 1.26.6 -> 1.26.7
> gst-devtools1: version bump 1.26.6 -> 1.26.7
> gst-libav1: version bump 1.26.6 -> 1.26.7
> gst-python1: version bump 1.26.6 -> 1.26.7
> gst-rtsp-server1: version bump 1.26.6 -> 1.26.7
> gstreamer-vaapi1: version bump 1.26.6 -> 1.26.7
> ptxd_make_get_git: refactor in preparation for submodule support
> ptxd_make_get_git: use --quiet when creating a new repo
> ptxd_make_get_git: add support for submodules
> ptxd_make_get_git: remove leftover 'set +x'
> ptxd_make_world_prepare_cargo_check: remove leftover 'set -x'
> scripts: use $@ and $* correctly with quotes
> ptxd_kconfig_update: fix error message
> scripts: don't use break/continue outside loops
> ptxd_make_world_parse_license_files: split license arguments properly
> ptxd_make_get: split license arguments properly
> scripts: don't escape ! in expressions
> abseil-cpp: build with -fPIC
> mosh: move to staging
> intel-gmmlib: version bump 22.7.0 -> 22.8.2
> intel-media-driver: version bump 24.4.4 -> 25.4.2
> valgrind: version bump 3.22.0 -> 3.26.0
> protobuf: fix building on ARMv5 and PPC
> host-system-python3-strenum: new package
> xkeyboard-config: add missing dependency
> ed: move to staging
> memtester: version bump 4.5.0 -> 4.7.1
> libgmp: fix building with gcc 15
> cifs-utils: fix building with gcc-15
> iftop: fix building with gcc-15
>
> Philipp Zabel (32):
> mesalib: version bump 25.2.2 -> 25.2.4
> glslang: version bump 1.4.321.0 -> 1.4.328.0
> spirv-headers: version bump 1.4.321.0 -> 1.4.328.0
> spirv-tools: version bump 1.4.321.0 -> 1.4.328.0
> vulkan-headers: version bump 1.4.321.0 -> 1.4.328.0
> vulkan-loader: version bump 1.4.321.0 -> 1.4.328.0
> vulkan-tools: version bump 1.4.321.0 -> 1.4.328.0
> vulkan-utility-libraries: version bump 1.4.321.0 -> 1.4.328.0
> vulkan-validationlayers: version bump 1.4.321.0 -> 1.4.328.0
> volk: version bump 1.4.321.0 -> 1.4.328.0
> shaderc: version bump v2025.3 -> v2025.4
> llvm: version bump 20.1.2 -> 21.1.1
> host-clang: version bump 20.1.2 -> 21.1.1
> host-libclc: version bump 20.1.2 -> 21.1.1
> host-spirv-llvm-translator: version bump 20.1.1 -> 21.1.1
> neatvnc: version bump 0.9.4 -> 0.9.5
> glslang: version bump 1.4.328.0 -> 1.4.328.1
> spirv-headers: version bump 1.4.328.0 -> 1.4.328.1
> spirv-tools: version bump 1.4.328.0 -> 1.4.328.1
> volk: version bump 1.4.328.0 -> 1.4.328.1
> vulkan-headers: version bump 1.4.328.0 -> 1.4.328.1
> vulkan-loader: version bump 1.4.328.0 -> 1.4.328.1
> vulkan-tools: version bump 1.4.328.0 -> 1.4.328.1
> vulkan-utility-libraries: version bump 1.4.328.0 -> 1.4.328.1
> vulkan-validationlayers: version bump 1.4.328.0 -> 1.4.328.1
> weston: Backport patch to support libdisplay-info 0.3.0
> mesalib: version bump 25.2.4 -> 25.2.5
> host-clang: version bump 21.1.1 -> 21.1.3
> host-libclc: version bump 21.1.1 -> 21.1.3
> llvm: version bump 21.1.1 -> 21.1.3
> libxkbcommon: version bump 1.12.1 -> 1.12.3
> mesalib: version bump 25.2.5 -> 25.2.6
>
> Roland Hieber (2):
> gdb: bump default version 13.1 -> 15.2
> gdb: depend on GMP and MPFR by default
>
> Rouven Czerwinski (1):
> v4l-utils: install required lib for v4l2-tracer
>
> Sven Püschel (110):
> i2c-tools: version bump 4.3 -> 4.4
> libogg: version bump 1.3.5 -> 1.3.6
> nano: version bump 8.0 -> 8.6
> fribidi: version bump 1.0.13 -> 1.0.16
> libgcrypt: version bump 1.11.0 -> 1.11.2
> libsoup: version bump 3.4.4 -> 3.6.5
> hostapd: version bump 2.10 -> 2.11
> wpa_supplicant: version bump 2.10 -> 2.11
> flac: version bump 1.3.3 -> 1.5.0
> less: version bump 668 -> 679
> gawk: version bump 5.2.1 -> 5.3.2
> libtiff: version bump 4.7.0 -> 4.7.1
> v4l-utils: version bump 1.28.1 -> 1.32.0
> boost: version bump 1.86.0 -> 1.89.0
> harfbuzz: version bump 8.3.0 -> 12.1.0
> libwebp: version bump 1.3.2 -> 1.6.0
> gnupg: use the stable 2.4 version line
> libxslt: version bump 1.1.42 -> 1.1.43
> wget: version bump 1.21.3 -> 1.25.0
> lz4: version bump 1.9.4 -> 1.10.0
> libsolv: New package
> opkg: version bump 0.7.0 -> 0.9.0
> stress-ng: version bump 0.14.06 -> 0.19.05
> evtest: version bump 1.35 -> 1.36
> stress: version bump 1.0.4 -> 1.0.7
> libass: don't run autogen.sh in libass.make
> sockperf: don't run autogen.sh in sockperf.make
> libbsd: version bump 0.11.7 -> 0.12.2
> libassuan: version bump 3.0.1 -> 3.0.2
> libgpg-error: version bump 1.51 -> 1.56
> smartmontools: version bump 7.2 -> 7.5
> libpsl: version bump 0.21.2 -> 0.21.5
> lua: version bump 5.4.4 -> 5.4.8
> libdisplay-info: version bump 0.2.0 -> 0.3.0
> libnghttp2: version bump 1.50.0 -> 1.67.1
> bluez: version bump 5.77 -> 5.84
> squashfs-tools: version bump 4.6.1 -> 4.7.2
> icu: version bump 74.1 -> 77.1
> pipewire: version bump 1.4.8 -> 1.4.9
> wireplumber: version bump 0.5.7 -> 0.5.12
> zbar: version bump 0.23.90 -> 0.23.93
> libsrtp: version bump 2.5.0 -> 2.7.0
> lcms: version bump 2.16 -> 2.17
> at-spi2-core: version bump 2.52.0 -> 2.58.1
> openldap: version bump 2.6.9 -> 2.6.10
> socat: version bump 1.7.3.2 -> 1.8.0.3
> cifs-utils: version bump 7.0 -> 7.4
> lvm2: version bump 2.03.22 -> 2.03.35
> readline: version bump 8.2 -> 8.3
> iperf3: version bump 3.16 -> 3.19.1
> rsync3: version bump 3.2.7 -> 3.4.1
> rpcbind: version bump 1.2.6 -> 1.2.8
> jansson: version bump 2.13.1 -> 2.14.1
> nettle: version bump 3.8.1 -> 3.10.2
> libical: version bump 3.0.17 -> 3.0.20
> pango: version bump 1.50.12 -> 1.57.0
> mpfr: version bump 4.2.1 -> 4.2.2
> npth: version bump 1.7 -> 1.8
> talloc: version bump 2.3.4 -> 2.4.3
> libusb-compat: version bump 0.1.3 -> 0.1.8
> libatomic_ops: version bump 7.8.0 -> 7.8.4
> libtasn1: version bump 4.19.0 -> 4.20.0
> libwacom: version bump 2.9.0 -> 2.16.1
> nfsutils: version bump 2.6.2 -> 2.8.4
> cryptsetup: version bump 2.7.4 -> 2.8.1
> pam: version bump 1.5.2 -> 1.7.1
> fuse3: version bump 3.16.2 -> 3.17.4
> sqlite: version bump 3.49.2 -> 3.50.4
> xorg-font-util: version bump 1.3.2 -> 1.4.1
> dav1d: version bump 1.3.0 -> 1.5.1
> xz: version bump 5.4.4 -> 5.8.1
> glib-networking: version bump 2.78.0 -> 2.80.1
> json-glib: version bump 1.9.2 -> 1.10.8
> xcb-proto: version bump 1.16.0 -> 1.17.0
> libxcb: version bump 1.16 -> 1.17.0
> xorg-lib-ice: version bump 1.0.10 -> 1.1.2
> xorg-lib-SM: version bump 1.2.3 -> 1.2.6
> xorg-lib-xau: version bump 1.0.9 -> 1.0.12
> xorg-lib-Xdamage: version bump 1.1.5 -> 1.1.6
> xorg-lib-Xext: version bump 1.3.4 -> 1.3.6
> xorg-lib-Xfixes: version bump 5.0.3 -> 6.0.2
> xorg-lib-Xi: version bump 1.7.10 -> 1.8.2
> xorg-lib-Xrandr: version bump 1.5.2 -> 1.5.4
> xorg-lib-xtrans: version bump 1.4.0 -> 1.6.0
> xorg-lib-Xxf86vm: version bump 1.1.4 -> 1.1.6
> gdk-pixbuf: version bump 2.42.10 -> 2.44.4
> vim: version bump 9.1.0061 -> 9.1.1868
> igt-gpu-tools: version bump 2.1 -> 2.2
> gtk: version bump 3.24.48 -> 3.24.51
> libtag: version bump 1.13.1 -> 2.1.1
> abseil-cpp: version bump 20230802.1 -> 20250814.1
> host-clang: version bump 21.1.3 -> 21.1.4
> host-libclc: version bump 21.1.3 -> 21.1.4
> llvm: version bump 21.1.3 -> 21.1.4
> libmxml: version bump 3.3.1 -> 4.0.4
> netcat: version bump 1.228 -> 1.234
> rtmpdump: version bump 2021-02-19-gf1b83c10d8be -> 2024-03-01-g6f6bb1353fc8
> xorg-lib-xshmfence: version bump 1.3 -> 1.3.3
> fontconfig: version bump 2.14.2 -> 2.17.1
> xkeyboard-config: version bump 2.42 -> 2.46
> xorg-font-alias: version bump 1.0.3 -> 1.0.5
> libbsd: patch sanitize disable flag
> host-abseil-cpp: new package
> protobuf: version bump 3.7.1 -> 33.0
> protobuf-c: version bump 1.4.1 -> 1.5.2
> nanopb: version bump 0.4.8 -> 0.4.9.1
> krb5: version bump 1.20 -> 1.22.1
> ffmpeg: version bump 7.1.1 -> 8.0
> nbd: version bump 3.25 -> 3.26.1
> networkmanager: version bump 1.52.0 -> 1.54.1
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2025-11-07 10:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-07 10:34 Michael Olbrich
2025-11-07 10:35 ` Michael Olbrich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aQ3Lcbg5yC6CDwCv@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox