[ptxdist] [PATCH] openssl: fix configuration for mips64

[ptxdist] [PATCH] openssl: fix configuration for mips64

[Ladislav Michl]

From: Ladislav Michl <ladis@triops.cz>

Signed-off-by: Ladislav Michl <ladis@triops.cz>
---
 rules/openssl.make | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/rules/openssl.make b/rules/openssl.make
index f2e985b58..2cdaf5259 100644
--- a/rules/openssl.make
+++ b/rules/openssl.make
@@ -45,11 +45,11 @@ OPENSSL_ARCH-$(PTXCONF_ARCH_ARM64)	:= debian-arm64
 
 ifdef PTXCONF_ENDIAN_LITTLE
 OPENSSL_ARCH-$(PTXCONF_ARCH_ARM)	:= debian-armel
-OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-mipsel
+OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-$(call ptx/ifdef,PTXCONF_ARCH_LP64,mips64el,mipsel)
 OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH3)	:= debian-sh3
 OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH4)	:= debian-sh4
 else
-OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-mips
+OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-$(call ptx/ifdef,PTXCONF_ARCH_LP64,mips64,mips)
 OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH3)	:= debian-sh3eb
 OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH4)	:= debian-sh4eb
 endif
-- 
2.39.5

Re: [ptxdist] [PATCH] openssl: fix configuration for mips64

[Michael Olbrich]

On Tue, May 06, 2025 at 01:20:49PM +0200, Ladislav Michl wrote:
> From: Ladislav Michl <ladis@triops.cz>
> 
> Signed-off-by: Ladislav Michl <ladis@triops.cz>
> ---
>  rules/openssl.make | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/rules/openssl.make b/rules/openssl.make
> index f2e985b58..2cdaf5259 100644
> --- a/rules/openssl.make
> +++ b/rules/openssl.make
> @@ -45,11 +45,11 @@ OPENSSL_ARCH-$(PTXCONF_ARCH_ARM64)	:= debian-arm64
>  
>  ifdef PTXCONF_ENDIAN_LITTLE
>  OPENSSL_ARCH-$(PTXCONF_ARCH_ARM)	:= debian-armel
> -OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-mipsel
> +OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-$(call ptx/ifdef,PTXCONF_ARCH_LP64,mips64el,mipsel)

PTXCONF_ARCH_MIPS in combination with PTXCONF_ARCH_LP64 is currently not
possible in PTXdist upstream. I assume you have local changes to
platforms/architecture.in. Can you send those as well?

Michael

>  OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH3)	:= debian-sh3
>  OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH4)	:= debian-sh4
>  else
> -OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-mips
> +OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-$(call ptx/ifdef,PTXCONF_ARCH_LP64,mips64,mips)
>  OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH3)	:= debian-sh3eb
>  OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH4)	:= debian-sh4eb
>  endif
> -- 
> 2.39.5
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [ptxdist] [APPLIED] openssl: fix configuration for mips64

[Michael Olbrich]

Thanks, applied as 01fa52a51e618b120ea060ee8539700ab06de770.

Michael

[sent from post-receive hook]

On Wed, 14 May 2025 08:07:44 +0200, Ladislav Michl <oss-lists@triops.cz> wrote:
> Signed-off-by: Ladislav Michl <ladis@triops.cz>
> Message-Id: <aBnwkfqsKkF4QOq9@lenoch>
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
> 
> diff --git a/rules/openssl.make b/rules/openssl.make
> index f2e985b58d28..2cdaf52594e9 100644
> --- a/rules/openssl.make
> +++ b/rules/openssl.make
> @@ -45,11 +45,11 @@ OPENSSL_ARCH-$(PTXCONF_ARCH_ARM64)	:= debian-arm64
>  
>  ifdef PTXCONF_ENDIAN_LITTLE
>  OPENSSL_ARCH-$(PTXCONF_ARCH_ARM)	:= debian-armel
> -OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-mipsel
> +OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-$(call ptx/ifdef,PTXCONF_ARCH_LP64,mips64el,mipsel)
>  OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH3)	:= debian-sh3
>  OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH4)	:= debian-sh4
>  else
> -OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-mips
> +OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-$(call ptx/ifdef,PTXCONF_ARCH_LP64,mips64,mips)
>  OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH3)	:= debian-sh3eb
>  OPENSSL_ARCH-$(PTXCONF_ARCH_SH_SH4)	:= debian-sh4eb
>  endif

Re: [ptxdist] [PATCH] openssl: fix configuration for mips64

[Ladislav Michl]

On Fri, May 09, 2025 at 10:37:49AM +0200, Michael Olbrich wrote:
> On Tue, May 06, 2025 at 01:20:49PM +0200, Ladislav Michl wrote:
> > From: Ladislav Michl <ladis@triops.cz>
> > 
> > Signed-off-by: Ladislav Michl <ladis@triops.cz>
> > ---
> >  rules/openssl.make | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/rules/openssl.make b/rules/openssl.make
> > index f2e985b58..2cdaf5259 100644
> > --- a/rules/openssl.make
> > +++ b/rules/openssl.make
> > @@ -45,11 +45,11 @@ OPENSSL_ARCH-$(PTXCONF_ARCH_ARM64)	:= debian-arm64
> >  
> >  ifdef PTXCONF_ENDIAN_LITTLE
> >  OPENSSL_ARCH-$(PTXCONF_ARCH_ARM)	:= debian-armel
> > -OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-mipsel
> > +OPENSSL_ARCH-$(PTXCONF_ARCH_MIPS)	:= debian-$(call ptx/ifdef,PTXCONF_ARCH_LP64,mips64el,mipsel)
> 
> PTXCONF_ARCH_MIPS in combination with PTXCONF_ARCH_LP64 is currently not
> possible in PTXdist upstream. I assume you have local changes to
> platforms/architecture.in. Can you send those as well?

One of BSP's files is just doing:
	select ARCH_LP64

I've tried to solve it generic way, but I'm still unhappy the with solution.

	L.