From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: Lucas Sinn <lucas.sinn@wolfvision.net>
Subject: Re: [ptxdist] [PATCH v2] glibmm: add new package
Date: Thu, 8 Aug 2024 16:25:33 +0200 [thread overview]
Message-ID: <ZrTVXZlD0ydqrYh5@pengutronix.de> (raw)
In-Reply-To: <20240808124615.2883320-1-lucas.sinn@wolfvision.net>
On Thu, Aug 08, 2024 at 02:46:15PM +0200, Lucas Sinn wrote:
> Signed-off-by: Lucas Sinn <lucas.sinn@wolfvision.net>
> ---
> Amending the proper licence version to GLIBMM_LICENCE variable
>
> rules/glibmm.in | 10 +++++++
> rules/glibmm.make | 71 +++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 81 insertions(+)
> create mode 100644 rules/glibmm.in
> create mode 100644 rules/glibmm.make
>
> diff --git a/rules/glibmm.in b/rules/glibmm.in
> new file mode 100644
> index 000000000..5b6e4646e
> --- /dev/null
> +++ b/rules/glibmm.in
> @@ -0,0 +1,10 @@
> +## SECTION=multimedia_gtk
> +
> +config GLIBMM
> + tristate
> + select HOST_MESON
> + select GLIB
> + select LIBSIGCPP
libsigcpp is currently in staging, because the version in ptxdist is old
and fails to build with newer compilers. This package must be updated as
well.
> + prompt "glibmm"
> + help
> + C++ wrapper for glib
> diff --git a/rules/glibmm.make b/rules/glibmm.make
> new file mode 100644
> index 000000000..90444144f
> --- /dev/null
> +++ b/rules/glibmm.make
> @@ -0,0 +1,71 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2024 by Lucas Sinn <lucas.sinn@wolfvision.net>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_GLIBMM) += glibmm
> +
> +#
> +# Paths and names
> +#
> +GLIBMM_VERSION := 2.78.1
> +GLIBMM_MD5 := 52b93bf93de45e5a6b3c321bc832cd9c
> +GLIBMM := glibmm-$(GLIBMM_VERSION)
> +GLIBMM_SUFFIX := tar.xz
> +GLIBMM_URL := $(call ptx/mirror, GNOME, glibmm/$(basename $(GLIBMM_VERSION))/$(GLIBMM).$(GLIBMM_SUFFIX))
> +GLIBMM_SOURCE := $(SRCDIR)/$(GLIBMM).$(GLIBMM_SUFFIX)
> +GLIBMM_DIR := $(BUILDDIR)/$(GLIBMM)
> +GLIBMM_LICENSE := LGPL-2.1-only AND GPL-2.0-only
> +GLIBMM_LICENSE_FILES := \
> + file://COPYING;md5=42dfffebc56fec7527aac53b7a89d1d8 \
> + file://COPYING.tools;md5=751419260aa954499f7abaabaa882bbe
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +GLIBMM_MESON_CROSS_FILE := $(call ptx/get-alternative, config/meson, glib-cross-file.meson)
Are you sure that this is needed? Non of the variables specified here seem
to be used.
Michael
> +#
> +# meson
> +#
> +GLIBMM_CONF_TOOL := meson
> +GLIBMM_CONF_OPT := \
> + $(CROSS_MESON_USR) \
> + -Dbuild-deprecated-api=false \
> + -Dbuild-documentation=false \
> + -Dbuild-examples=false \
> + -Ddebug-refcounting=false \
> + -Ddist-warnings=fatal \
> + -Dmaintainer-mode=false \
> + -Dmsvc14x-parallel-installable=false \
> + -Dwarnings=max \
> + \
> + --cross-file $(GLIB_MESON_CROSS_FILE)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/glibmm.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, glibmm)
> + @$(call install_fixup, glibmm,PRIORITY,optional)
> + @$(call install_fixup, glibmm,SECTION,base)
> + @$(call install_fixup, glibmm,AUTHOR,"Lucas Sinn <lucas.sinn@wolfvision.net>")
> + @$(call install_fixup, glibmm,DESCRIPTION,missing)
> +
> + @$(call install_lib, glibmm, 0, 0, 0644, libglibmm-2.68)
> + @$(call install_lib, glibmm, 0, 0, 0644, libgiomm-2.68)
> +
> + @$(call install_finish, glibmm)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> --
> 2.37.2
>
>
> Lucas Sinn
> R&D Engineer
>
> Wolfvision GmbH
> Oberes Ried 14 | 6833 Klaus | Austria
> Tel: +43 5523 52250 <tel:+43552352250> | Mail: lucas.sinn@wolfvision.net <mailto:lucas.sinn@wolfvision.net>
>
> Website: wolfvision.com <www.wolfvision.com>
> Firmenbuch / Commercial Register: FN283521v Feldkirch/Austria
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2024-08-08 14:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <016db821-bc16-4106-ab26-ac766a339fab.e0c24246-04d4-485f-8d5f-1cc8fbefd095.3dc9a7b9-65b1-4651-bebc-0d55527def10@emailsignatures365.codetwo.com>
2024-08-08 12:46 ` Lucas Sinn
2024-08-08 14:25 ` Michael Olbrich [this message]
2024-08-08 16:00 ` Lucas Sinn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZrTVXZlD0ydqrYh5@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=lucas.sinn@wolfvision.net \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox