From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [ANNOUNCE] PTXdist 2024.07.0 released
Date: Fri, 5 Jul 2024 11:04:48 +0200 [thread overview]
Message-ID: <Zoe3MDPVc_-x24HJ@pengutronix.de> (raw)
In-Reply-To: <ZoecyD3t7inuWQct@pengutronix.de>
Hi,
So the openssh server is broken in this release. Connecting will fail
because /usr/sbin/sshd-session is missing. The fix for this should hit
master sometime today.
Michael
On Fri, Jul 05, 2024 at 09:12:08AM +0200, Michael Olbrich wrote:
> Hi,
>
> I'm happy to announce that I've just released ptxdist-2024.07.0.
>
> There are no big changes in this release. The removal of ftp URLs is now
> complete. They are still supported but for BSP packages but no new ftp URLs
> will be accepted in PTXdist itself.
>
> Building Python Packages with PTXdist on Fedora (and probably related
> distros) works again. There were some issues where lib64 directory names
> caused some issues.
>
> The rest are mostly version bumps and a few new packages and bugfixes.
>
> Thanks to all contributors and - as always - the shortlog below.
>
> Enjoy,
> Michael Olbrich
>
>
> Andreas Helmcke (4):
> php8: Version bump 8.3.3 -> 8.3.8
> ntpclient: version bump 2015_365 -> 2024_132; removed from staging
> lighttpd: Version bump, 1.4.74 -> 1.4.76
> openvpn: Version bump, 2.6.9 -> 2.6.11
>
> Bruno Thomsen (1):
> openssh: Version bumped 9.7p1 -> 9.8p1
>
> Christian Melki (29):
> libcurl: Version bump. 8.7.1 -> 8.8.0
> host-libcurl: Follow target libcurl, remove ntlm-wb.
> tpm2-tss: Version bump. 4.1.1 -> 4.1.3
> e2fsprogs: Version bump. 1.47.0 -> 1.47.1
> ethtool: Version bump. 6.7 -> 6.9
> openssl: Version bump. 3.2.1 -> 3.3
> ntp: Version bump. 4.2.8p17 -> 4.2.8p18
> hwdata: Version bump. 0.382 -> 0.383
> pciutils: Version bump. 3.12.0 -> 3.13.0
> libevdev: Version bump. 1.13.1 -> 1.13.2
> wayland: Version bump. 1.22.0 -> 1.23.0
> libdrm: Version bump. 2.4.120 -> 2.4.121
> openssl: Version bump. 3.3.0 -> 3.3.1
> linux-firmware: Version bump. 20240513 -> 20240610
> pcre2: Version bump. 10.43 -> 10.44
> libinput: Version bump. 1.25.0 -> 1.26.0
> nss: Version bump. 3.100 -> 3.101
> ca-certificates: Version bump. 3.100 -> 3.101
> weston: Version bump. 13.0.1 -> 13.0.3
> xkeyboard-config: Version bump. 2.41 -> 2.42
> glib: Version bump. 2.80.2 -> 2.80.3
> alsa-lib: Version bump. 1.2.11 -> 1.2.12
> alsa-utils: Version bump. 1.2.11 -> 1.2.12
> libxml2: Version bump. 2.11.7 -> 2.13.0
> sdl2: Version bump. 2.30.3 -> 2.30.4
> libxml2: Version bump. 2.13.0 -> 2.13.1
> librtlsdr: Version bump. 0.8.0 -> 0.9.0
> dump1090fa: Version bump. 8.2 -> 9.0
> libdrm: Version bump. 2.4.121 -> 2.4.122
>
> Ian Abbott (2):
> image-root-ext: add configuration option to set a volume label
> parted: Version bump. 3.3 -> 3.6
>
> Lars Pedersen (1):
> modemmanager: Version bump 1.20.6 -> 1.22.0
>
> Lucas Stach (8):
> grub: replace download URL with HTTPS
> efax: replace download URL with HTTPS
> gdb: replace download URL with HTTPS
> gdbserver: replace download URL with HTTPS
> ptxd_make_get: drop passive FTP options
> ptxd_make_world_lint: check for usage of deprecated FTP protocol
> kernel/perf: enable jevents
> nvtop: version bump 3.0.2 -> 3.1.0
>
> Michael Olbrich (58):
> pipewire: version bump 1.0.3 -> 1.0.7
> ptxd_make_world_lint_ftp: improve detection
> gstreamer1: version bump 1.24.3 -> 1.24.4
> gst-plugins-base1: version bump 1.24.3 -> 1.24.4
> gst-plugins-good1: version bump 1.24.3 -> 1.24.4
> gst-plugins-bad1: version bump 1.24.3 -> 1.24.4
> gst-plugins-ugly1: version bump 1.24.3 -> 1.24.4
> gst-plugins-rs: version bump 1.24.3 -> 1.24.4
> gst-devtools1: version bump 1.24.3 -> 1.24.4
> gst-libav1: version bump 1.24.3 -> 1.24.4
> gst-python1: version bump 1.24.3 -> 1.24.4
> gst-rtsp-server1: version bump 1.24.3 -> 1.24.4
> gstreamer-vaapi1: version bump 1.24.3 -> 1.24.4
> host-nodejs: call configure with python3 directly
> wrapper: turn includes into system includes
> figlet: add md5 for the new URL
> c-ares: fix URL
> ptxd_make_get_http: improve content sanity check
> yajl: really fix the URL
> netsniff-ng: fix download
> ptxd_make_get_http: drop text/plain check for urlcheck again
> use /proc/<pid>/fd/<fd> to write to the logfile in wrappers
> libxmlconfig: move to staging
> xmlstarlet: move to staging
> libgsf: move to staging
> libxslt: version bump 1.1.39 -> 1.1.40
> networkmanager: fix meson options
> systemd: version bump 255.4 -> 256
> gettext: version bump 0.21 -> 0.22.5
> libcaca: cleanup configure options
> ptxd_make_world_install_python: handle lib64
> liburing: version bump 2.3 -> 2.6
> tntnet: move to staging
> cxxtools: move to staging
> lrzsz: move to staging
> cairomm: move to staging
> libsigcpp: move to staging
> networkmanager: add patch to fix building without systemd
> gstreamer1: version bump 1.24.4 -> 1.24.5
> gst-plugins-base1: version bump 1.24.4 -> 1.24.5
> gst-plugins-good1: version bump 1.24.4 -> 1.24.5
> gst-plugins-bad1: version bump 1.24.4 -> 1.24.5
> gst-plugins-ugly1: version bump 1.24.4 -> 1.24.5
> gst-devtools1: version bump 1.24.4 -> 1.24.5
> gst-libav1: version bump 1.24.4 -> 1.24.5
> gst-plugins-rs: version bump 1.24.4 -> 1.24.5
> gst-python1: version bump 1.24.4 -> 1.24.5
> gst-rtsp-server1: version bump 1.24.4 -> 1.24.5
> gstreamer-vaapi1: version bump 1.24.4 -> 1.24.5
> systemd: version bump 256 -> 256.1
> libjpeg: use proper github URL
> ptxd_make_world_report_yaml_fragment: use correct name for the main package
> generate-report: spdx: don't assume that the first source-packages is the main package
> host-ua-nodeset: use proper github URL
> open62541: use proper github URL
> libusbgx: use proper github URL
> generate-report: improve regexes for github URLs
> generate-report: allow packages without md5
>
> Oleksij Rempel (1):
> networkmanager: version bump 1.44.2 -> 1.48.0
>
> Philipp Zabel (3):
> host-meson: version bump 1.3.0 -> 1.4.0
> mesalib: version bump 24.0.5 -> 24.0.9
> pipewire: version bump 1.0.7 -> 1.2.0
>
> Roland Hieber (15):
> ptxd_lib_dgen: improve error message
> qt6: allow selecting linuxfb platform
> atk: rename to at-spi2-core; version bump 2.38.0 -> 2.52.0
> nanopb: new package: tiny protobuf implementation
> paho-mqtt-cpp: version bump 1.0.1 -> 1.2.0
> python3-jinja2: pin down license files
> host-python3-markupsafe: add host package
> host-python3-jinja2: add host package
> host-python3-poetry-core: add new host package
> host-python3-dunamai: add new host package
> host-python3-tomlkit: add new host package
> host-python3-poetry-dynamic-versioning: add new host package
> python3-aiomqtt: new package
> python3-periphery: new package
> python3-protobuf: new package
>
> Sven Püschel (2):
> apitrace: remove Google Test dependency
> xwayland: conditionally depend on libepoxy
>
> Uwe Kleine-König (3):
> kernel/perf: Fix host path leakage
> libtraceevent: Fix help text
> libpwm: New package
>
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2024-07-05 9:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-05 7:12 Michael Olbrich
2024-07-05 9:04 ` Michael Olbrich [this message]
2024-07-11 7:50 ` [ptxdist] [ANNOUNCE] PTXdist 2024.07.1 released Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zoe3MDPVc_-x24HJ@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox