From: Ladislav Michl <oss-lists@triops.cz>
To: ptxdist@pengutronix.de
Subject: [ptxdist] [PATCH v2 1/3] util-linux-ng: Sort config entries
Date: Thu, 29 Sep 2022 19:51:22 +0200 [thread overview]
Message-ID: <YzXbGm4dIjrsj/PR@lenoch> (raw)
From: Ladislav Michl <ladis@linux-mips.org>
Split menu entries into groups and sort them alphabetically.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
CHANGES:
- v2: None
rules/util-linux-ng.in | 610 +++++++++++++++++++++--------------------
1 file changed, 312 insertions(+), 298 deletions(-)
diff --git a/rules/util-linux-ng.in b/rules/util-linux-ng.in
index b317d6505..772d913ff 100644
--- a/rules/util-linux-ng.in
+++ b/rules/util-linux-ng.in
@@ -44,36 +44,7 @@ config UTIL_LINUX_NG_PARTX_TOOLS
config UTIL_LINUX_NG_SCHEDUTILS
bool
-config UTIL_LINUX_NG_AGETTY
- bool
- prompt "agetty"
- help
- A small getty.
-
-config UTIL_LINUX_NG_COLUMN
- bool
- select UTIL_LINUX_NG_LIBSMARTCOLS
- prompt "column"
- help
- Columnate lists.
-
-config UTIL_LINUX_NG_LINE
- bool
- prompt "line"
- help
- The line utility.
-
-config UTIL_LINUX_NG_GETOPT
- bool
- prompt "getopt"
- depends on !BUSYBOX_GETOPT || ALLYES
- help
- The getopt is used to break up (parse) options in command
- lines for easy parsing by shell procedures, and to check
- for valid options.
-
-comment "BusyBox' getopt is selected!"
- depends on BUSYBOX_GETOPT
+comment "disk-utils"
config UTIL_LINUX_NG_ADDPART
bool
@@ -82,46 +53,22 @@ config UTIL_LINUX_NG_ADDPART
help
The addpart utility.
-config UTIL_LINUX_NG_DELPART
+config UTIL_LINUX_NG_CFDISK
bool
- select UTIL_LINUX_NG_PARTX_TOOLS
- prompt "delpart"
+ select UTIL_LINUX_NG_LIBFDISK
+ select UTIL_LINUX_NG_LIBSMARTCOLS
+ select UTIL_LINUX_NG_FDISKS
+ select UTIL_LINUX_NG_USES_NCURSES
+ prompt "cfdisk"
help
- The delpart utility.
+ cfdisk is a curses based program for partitioning any hard disk drive.
-config UTIL_LINUX_NG_PARTX
+config UTIL_LINUX_NG_DELPART
bool
select UTIL_LINUX_NG_PARTX_TOOLS
- prompt "partx"
- help
- The partx utility.
-
-config UTIL_LINUX_NG_DMESG
- bool
- depends on !BUSYBOX_DMESG || ALLYES
- prompt "dmesg"
- help
- The dmesg utility.
-
-comment "BusyBox' dmesg is selected!"
- depends on BUSYBOX_DMESG
-
-config UTIL_LINUX_NG_NSENTER
- bool
- prompt "nsenter"
- help
- The nsenter utility
-
-config UTIL_LINUX_NG_MOUNTPOINT
- bool
- select UTIL_LINUX_NG_LIBMOUNT
- depends on !BUSYBOX_MOUNTPOINT || ALLYES
- prompt "mountpoint"
+ prompt "delpart"
help
- The mountpoint utility.
-
-comment "BusyBox' mountpoint is selected!"
- depends on BUSYBOX_MOUNTPOINT
+ The delpart utility.
config UTIL_LINUX_NG_FDISK
bool
@@ -136,25 +83,26 @@ config UTIL_LINUX_NG_FDISK
comment "BusyBox' fdisk is selected!"
depends on BUSYBOX_FDISK
-config UTIL_LINUX_NG_SFDISK
+config UTIL_LINUX_NG_FSCK
bool
- prompt "sfdisk"
- select UTIL_LINUX_NG_LIBFDISK
- select UTIL_LINUX_NG_LIBSMARTCOLS
- select UTIL_LINUX_NG_FDISKS
+ prompt "fsck"
+ select UTIL_LINUX_NG_LIBMOUNT
+ depends on !BUSYBOX_FSCK || ALLYES
help
- sfdisk - Partition table manipulator for Linux,
- scriptable for unattended partitioning
+ fsck is used to check and optionally repair one or
+ more Linux file systems. fsck is simply a front-end for
+ the various file system checkers (fsck.fstype) available
+ under Linux.
-config UTIL_LINUX_NG_CFDISK
+comment "BusyBox' fsck is selected!"
+ depends on BUSYBOX_FSCK
+
+config UTIL_LINUX_NG_MKFS
bool
- select UTIL_LINUX_NG_LIBFDISK
- select UTIL_LINUX_NG_LIBSMARTCOLS
- select UTIL_LINUX_NG_FDISKS
- select UTIL_LINUX_NG_USES_NCURSES
- prompt "cfdisk"
+ prompt "mkfs"
help
- cfdisk is a curses based program for partitioning any hard disk drive.
+ The mkfs command is a generic wrapper for fs specific
+ mkfs.* commands.
config UTIL_LINUX_NG_MKSWAP
bool
@@ -173,164 +121,134 @@ config UTIL_LINUX_NG_MKSWAP_UUID
comment "BusyBox' mkswap is selected!"
depends on BUSYBOX_MKSWAP
-config UTIL_LINUX_NG_SWAPON
+config UTIL_LINUX_NG_PARTX
bool
- prompt "swapon"
- select UTIL_LINUX_NG_LIBBLKID
- select UTIL_LINUX_NG_LIBMOUNT
- select UTIL_LINUX_NG_LIBSMARTCOLS
- depends on !BUSYBOX_SWAPON || ALLYES
+ select UTIL_LINUX_NG_PARTX_TOOLS
+ prompt "partx"
help
- Swapon is used to specify devices on which paging and swapping are to take place.
-
-comment "BusyBox' swapon is selected!"
- depends on BUSYBOX_SWAPON
+ The partx utility.
-config UTIL_LINUX_NG_LOSETUP
+config UTIL_LINUX_NG_SFDISK
bool
- prompt "losetup"
+ prompt "sfdisk"
+ select UTIL_LINUX_NG_LIBFDISK
select UTIL_LINUX_NG_LIBSMARTCOLS
- depends on !BUSYBOX_LOSETUP || ALLYES
+ select UTIL_LINUX_NG_FDISKS
help
- losetup is used to associate or detach a loop device with a regular
- file or block device, and to query the status of a loop device.
+ sfdisk - Partition table manipulator for Linux,
+ scriptable for unattended partitioning
-comment "BusyBox' losetup is selected!"
- depends on BUSYBOX_LOSETUP
+comment "login-utils"
-config UTIL_LINUX_NG_MOUNT
+config UTIL_LINUX_NG_LOGIN
bool
- prompt "mount"
- select UTIL_LINUX_NG_LIBMOUNT
- depends on !BUSYBOX_MOUNT || ALLYES
+ select UTIL_LINUX_NG_USES_PAM
+ depends on GLOBAL_PAM && ((!BUSYBOX_LOGIN && !SHADOW) || ALLYES)
+ prompt "login"
help
- The mount command serves to attach the file system
- found on some device to the big file tree.
+ The login program is used to establish a new session with
+ the system.
-comment "BusyBox' mount is selected!"
- depends on BUSYBOX_MOUNT
+comment "BusyBox' login is selected!"
+ depends on BUSYBOX_LOGIN
-config UTIL_LINUX_NG_UMOUNT
+comment "Shadow package is selected!"
+ depends on SHADOW
+
+config UTIL_LINUX_NG_SULOGIN
bool
- prompt "umount"
- select UTIL_LINUX_NG_MOUNT
- depends on !BUSYBOX_MOUNT || ALLYES
- depends on !BUSYBOX_UMOUNT || ALLYES
+ depends on !BUSYBOX_SULOGIN || ALLYES
+ prompt "sulogin"
help
- The mount(8) command serves to attach the file system
- found on some device to the big file tree.
- Conversely, the umount(8) command will detach it again.
+ sulogin is invoked by init when the system goes into
+ single-user mode.
-comment "BusyBox' umount is selected!"
- depends on BUSYBOX_UMOUNT
+comment "BusyBox' sulogin is selected!"
+ depends on BUSYBOX_SULOGIN
-config UTIL_LINUX_NG_FLOCK
+comment "misc-utils"
+
+config UTIL_LINUX_NG_BLKID
bool
- prompt "flock"
- depends on !BUSYBOX_FLOCK || ALLYES
+ select UTIL_LINUX_NG_LIBBLKID
+ depends on !BUSYBOX_BLKID || ALLYES
+ prompt "blkid"
help
- The flock utility manages flock(2) locks from within
- shell scripts or from the command line.
+ The blkid program is the command-line interface to working with libblkid
+ library. It can determine the type of content (e.g. filesystem, swap)
+ a block device holds, and also attributes (tokens, NAME=value pairs) from
+ the content meta‐data (e.g. LABEL or UUID fields).
-comment "BusyBox' flock is selected!"
- depends on BUSYBOX_FLOCK
+comment "BusyBox' blkid is selected!"
+ depends on BUSYBOX_BLKID
-config UTIL_LINUX_NG_FSCK
+config UTIL_LINUX_NG_FINDFS
bool
- prompt "fsck"
- select UTIL_LINUX_NG_LIBMOUNT
- depends on !BUSYBOX_FSCK || ALLYES
+ select UTIL_LINUX_NG_LIBBLKID
+ depends on !BUSYBOX_FINDFS || ALLYES
+ prompt "findfs"
help
- fsck is used to check and optionally repair one or
- more Linux file systems. fsck is simply a front-end for
- the various file system checkers (fsck.fstype) available
- under Linux.
+ findfs will search the disks in the system looking for a filesystem
+ which has a label matching label or a UUID equal to uuid.
-comment "BusyBox' fsck is selected!"
- depends on BUSYBOX_FSCK
+comment "BusyBox' findfs is selected!"
+ depends on BUSYBOX_FINDFS
-config UTIL_LINUX_NG_FSFREEZE
+config UTIL_LINUX_NG_GETOPT
bool
- prompt "fsfreeze"
- depends on !BUSYBOX_FSFREEZE || ALLYES
+ prompt "getopt"
+ depends on !BUSYBOX_GETOPT || ALLYES
help
- fsfreeze suspends or resumes access to a filesystem.
+ The getopt is used to break up (parse) options in command
+ lines for easy parsing by shell procedures, and to check
+ for valid options.
-comment "BusyBox' fsfreeze is selected!"
- depends on BUSYBOX_FSFREEZE
+comment "BusyBox' getopt is selected!"
+ depends on BUSYBOX_GETOPT
-config UTIL_LINUX_NG_FSTRIM
+config UTIL_LINUX_NG_LSBLK
bool
- prompt "fstrim"
- depends on !BUSYBOX_FSTRIM || ALLYES
+ select UTIL_LINUX_NG_LIBBLKID
+ select UTIL_LINUX_NG_LIBMOUNT
+ select UTIL_LINUX_NG_LIBSMARTCOLS
+ prompt "lsblk"
help
- fstrim is used on a mounted filesystem to discard (or "trim")
- blocks which are not in use by the filesystem. This is useful
- for solid-state drives (SSDs) and thinly-provisioned storage.
-
-comment "BusyBox' fstrim is selected!"
- depends on BUSYBOX_FSTRIM
+ The lsblk command lists information about all available or the
+ specified block devices.
-config UTIL_LINUX_NG_IPCS
+config UTIL_LINUX_NG_MCOOKIE
bool
- prompt "ipcs"
- depends on !BUSYBOX_IPCS || ALLYES
+ prompt "mcookie"
help
- ipcs provides information on the ipc facilities
- for which the calling process has read access.
+ mcookie generates a 128-bit random hexadecimal number for
+ use with the X authority system.
-config UTIL_LINUX_NG_IRQTOP
+config UTIL_LINUX_NG_UUIDD
bool
- select UTIL_LINUX_NG_USES_NCURSES
- prompt "irqtop"
+ select UTIL_LINUX_NG_LIBUUID
+ prompt "uuidd"
help
- irqtop is a tool to observe irqs and softirqs in
- a top like fashion.
+ The uuidd daemon is used by the UUID library to generate
+ universally unique identifiers (UUIDs), especially time-based UUIDs,
+ in a secure and guaranteed- unique fashion, even in the face of large
+ numbers of threads running on different CPUs trying to grab UUIDs.
-config UTIL_LINUX_NG_LSIRQ
+config UTIL_LINUX_NG_UUIDGEN
bool
- prompt "lsirq"
- help
- lsirq is a tool to list kernel interrupt information.
-
-comment "BusyBox' ipcs is selected!"
- depends on BUSYBOX_IPCS
-
-config UTIL_LINUX_NG_IPCRM
- bool
- prompt "ipcrm"
- depends on !BUSYBOX_IPCRM || ALLYES
+ select UTIL_LINUX_NG_LIBUUID
+ prompt "uuidgen"
help
- ipcrm removes ipc facilities for which the calling process has
- read access.
-
-comment "BusyBox' ipcrm is selected!"
- depends on BUSYBOX_IPCRM
+ uuidgen is a command-line utility to create a new UUID value.
-config UTIL_LINUX_NG_READPROFILE
+config UTIL_LINUX_NG_WIPEFS
bool
- prompt "readprofile"
- depends on !BUSYBOX_READPROFILE || ALLYES
+ select UTIL_LINUX_NG_LIBBLKID
+ prompt "wipefs"
help
- The readprofile command uses the /proc/profile information
- to print ascii data on standard output. The output is
- organized in three columns: the first is the number of
- clock ticks, the second is the name of the C function
- in the kernel where those many ticks occurred, and the
- third is the normalized `load' of the procedure, calculated
- as a ratio between the number of ticks and the length of the
- procedure. The output is filled with blanks to ease readability.
-
-comment "BusyBox' readprofile is selected!"
- depends on BUSYBOX_READPROFILE
+ The wipefs program can erase filesystem, raid or partition-table
+ signatures.
-config UTIL_LINUX_NG_SETTERM
- bool
- select UTIL_LINUX_NG_USES_NCURSES
- prompt "setterm"
- help
- setterm - set terminal attributes like terminal name, cursor
- blinking and beeper sound
+comment "schedutils"
config UTIL_LINUX_NG_CHRT
bool
@@ -343,25 +261,6 @@ config UTIL_LINUX_NG_CHRT
comment "BusyBox' chrt is selected!"
depends on BUSYBOX_CHRT
-config UTIL_LINUX_NG_HWCLOCK
- bool
- prompt "hwclock"
- depends on !BUSYBOX_HWCLOCK || ALLYES
- help
- hwclock - The hwclock utility is used to read and set the hardware
- clock on a system. This is primarily used to set the current time
- on shutdown in the hardware clock, so the hardware will keep the
- correct time when Linux is _not_ running.
-
-comment "BusyBox' hwclock is selected!"
- depends on BUSYBOX_HWCLOCK
-
-config UTIL_LINUX_NG_WDCTL
- bool
- prompt "wdctl"
- help
- wdctl - Utility to show hardware watchdog status.
-
config UTIL_LINUX_NG_IONICE
bool
prompt "ionice"
@@ -380,85 +279,131 @@ config UTIL_LINUX_NG_TASKSET
comment "BusyBox' taskset is selected!"
depends on BUSYBOX_TASKSET
-config UTIL_LINUX_NG_MCOOKIE
+comment "sys-utils"
+
+config UTIL_LINUX_NG_CHMEM
bool
- prompt "mcookie"
+ prompt "chmem"
help
- mcookie generates a 128-bit random hexadecimal number for
- use with the X authority system.
+ The chmem command sets a particular size or range of
+ memory online or offline.
-config UTIL_LINUX_NG_LDATTACH
+config UTIL_LINUX_NG_DMESG
bool
- prompt "ldattach"
+ depends on !BUSYBOX_DMESG || ALLYES
+ prompt "dmesg"
help
- attach a line discipline to a serial line
+ The dmesg utility.
-config UTIL_LINUX_NG_UUIDD
+comment "BusyBox' dmesg is selected!"
+ depends on BUSYBOX_DMESG
+
+config UTIL_LINUX_NG_FLOCK
bool
- select UTIL_LINUX_NG_LIBUUID
- prompt "uuidd"
+ prompt "flock"
+ depends on !BUSYBOX_FLOCK || ALLYES
help
- The uuidd daemon is used by the UUID library to generate
- universally unique identifiers (UUIDs), especially time-based UUIDs,
- in a secure and guaranteed- unique fashion, even in the face of large
- numbers of threads running on different CPUs trying to grab UUIDs.
+ The flock utility manages flock(2) locks from within
+ shell scripts or from the command line.
-config UTIL_LINUX_NG_UUIDGEN
+comment "BusyBox' flock is selected!"
+ depends on BUSYBOX_FLOCK
+
+config UTIL_LINUX_NG_FSFREEZE
bool
- select UTIL_LINUX_NG_LIBUUID
- prompt "uuidgen"
+ prompt "fsfreeze"
+ depends on !BUSYBOX_FSFREEZE || ALLYES
help
- uuidgen is a command-line utility to create a new UUID value.
+ fsfreeze suspends or resumes access to a filesystem.
-config UTIL_LINUX_NG_BLKID
+comment "BusyBox' fsfreeze is selected!"
+ depends on BUSYBOX_FSFREEZE
+
+config UTIL_LINUX_NG_FSTRIM
bool
- select UTIL_LINUX_NG_LIBBLKID
- depends on !BUSYBOX_BLKID || ALLYES
- prompt "blkid"
+ prompt "fstrim"
+ depends on !BUSYBOX_FSTRIM || ALLYES
help
- The blkid program is the command-line interface to working with libblkid
- library. It can determine the type of content (e.g. filesystem, swap)
- a block device holds, and also attributes (tokens, NAME=value pairs) from
- the content meta‐data (e.g. LABEL or UUID fields).
+ fstrim is used on a mounted filesystem to discard (or "trim")
+ blocks which are not in use by the filesystem. This is useful
+ for solid-state drives (SSDs) and thinly-provisioned storage.
-comment "BusyBox' blkid is selected!"
- depends on BUSYBOX_BLKID
+comment "BusyBox' fstrim is selected!"
+ depends on BUSYBOX_FSTRIM
-config UTIL_LINUX_NG_LSBLK
+config UTIL_LINUX_NG_HWCLOCK
bool
- select UTIL_LINUX_NG_LIBBLKID
- select UTIL_LINUX_NG_LIBMOUNT
- select UTIL_LINUX_NG_LIBSMARTCOLS
- prompt "lsblk"
+ prompt "hwclock"
+ depends on !BUSYBOX_HWCLOCK || ALLYES
help
- The lsblk command lists information about all available or the
- specified block devices.
+ hwclock - The hwclock utility is used to read and set the hardware
+ clock on a system. This is primarily used to set the current time
+ on shutdown in the hardware clock, so the hardware will keep the
+ correct time when Linux is _not_ running.
-config UTIL_LINUX_NG_FINDFS
+comment "BusyBox' hwclock is selected!"
+ depends on BUSYBOX_HWCLOCK
+
+config UTIL_LINUX_NG_IPCRM
bool
- select UTIL_LINUX_NG_LIBBLKID
- depends on !BUSYBOX_FINDFS || ALLYES
- prompt "findfs"
+ prompt "ipcrm"
+ depends on !BUSYBOX_IPCRM || ALLYES
help
- findfs will search the disks in the system looking for a filesystem
- which has a label matching label or a UUID equal to uuid.
+ ipcrm removes ipc facilities for which the calling process has
+ read access.
-comment "BusyBox' findfs is selected!"
- depends on BUSYBOX_FINDFS
+comment "BusyBox' ipcrm is selected!"
+ depends on BUSYBOX_IPCRM
-config UTIL_LINUX_NG_WIPEFS
+config UTIL_LINUX_NG_IPCS
bool
- select UTIL_LINUX_NG_LIBBLKID
- prompt "wipefs"
+ prompt "ipcs"
+ depends on !BUSYBOX_IPCS || ALLYES
help
- The wipefs program can erase filesystem, raid or partition-table
- signatures.
+ ipcs provides information on the ipc facilities
+ for which the calling process has read access.
-config UTIL_LINUX_NG_ZRAMCTL
+comment "BusyBox' ipcs is selected!"
+ depends on BUSYBOX_IPCS
+
+config UTIL_LINUX_NG_IRQTOP
bool
- prompt "zramctl"
+ select UTIL_LINUX_NG_USES_NCURSES
+ prompt "irqtop"
help
- The zramctl program is a tool to set up and control zram devices.
+ irqtop is a tool to observe irqs and softirqs in
+ a top like fashion.
+
+config UTIL_LINUX_NG_LDATTACH
+ bool
+ prompt "ldattach"
+ help
+ attach a line discipline to a serial line
+
+config UTIL_LINUX_NG_LOSETUP
+ bool
+ prompt "losetup"
+ select UTIL_LINUX_NG_LIBSMARTCOLS
+ depends on !BUSYBOX_LOSETUP || ALLYES
+ help
+ losetup is used to associate or detach a loop device with a regular
+ file or block device, and to query the status of a loop device.
+
+comment "BusyBox' losetup is selected!"
+ depends on BUSYBOX_LOSETUP
+
+config UTIL_LINUX_NG_LSCPU
+ bool
+ select UTIL_LINUX_NG_LIBSMARTCOLS
+ prompt "lscpu"
+ help
+ lscpu shows information about the CPU architecture
+
+config UTIL_LINUX_NG_LSIRQ
+ bool
+ prompt "lsirq"
+ help
+ lsirq is a tool to list kernel interrupt information.
config UTIL_LINUX_NG_LSMEM
bool
@@ -467,52 +412,74 @@ config UTIL_LINUX_NG_LSMEM
The lsmem command lists the ranges of available memory and
it's online status.
-config UTIL_LINUX_NG_CHMEM
+config UTIL_LINUX_NG_MOUNT
bool
- prompt "chmem"
+ prompt "mount"
+ select UTIL_LINUX_NG_LIBMOUNT
+ depends on !BUSYBOX_MOUNT || ALLYES
help
- The chmem command sets a particular size or range of
- memory online or offline.
+ The mount command serves to attach the file system
+ found on some device to the big file tree.
-config UTIL_LINUX_NG_MKFS
+comment "BusyBox' mount is selected!"
+ depends on BUSYBOX_MOUNT
+
+config UTIL_LINUX_NG_MOUNTPOINT
bool
- prompt "mkfs"
+ select UTIL_LINUX_NG_LIBMOUNT
+ depends on !BUSYBOX_MOUNTPOINT || ALLYES
+ prompt "mountpoint"
help
- The mkfs command is a generic wrapper for fs specific
- mkfs.* commands.
+ The mountpoint utility.
-config UTIL_LINUX_NG_LSCPU
+comment "BusyBox' mountpoint is selected!"
+ depends on BUSYBOX_MOUNTPOINT
+
+config UTIL_LINUX_NG_NSENTER
bool
- select UTIL_LINUX_NG_LIBSMARTCOLS
- prompt "lscpu"
+ prompt "nsenter"
help
- lscpu shows information about the CPU architecture
+ The nsenter utility
-config UTIL_LINUX_NG_LOGIN
+config UTIL_LINUX_NG_PIVOT_ROOT
bool
- select UTIL_LINUX_NG_USES_PAM
- depends on GLOBAL_PAM && ((!BUSYBOX_LOGIN && !SHADOW) || ALLYES)
- prompt "login"
+ depends on !BUSYBOX_PIVOT_ROOT
+ prompt "pivot_root"
help
- The login program is used to establish a new session with
- the system.
+ change the root filesystem.
-comment "BusyBox' login is selected!"
- depends on BUSYBOX_LOGIN
+comment "BusyBox' pivot_root is selected!"
+ depends on BUSYBOX_PIVOT_ROOT
-comment "Shadow package is selected!"
- depends on SHADOW
+config UTIL_LINUX_NG_READPROFILE
+ bool
+ prompt "readprofile"
+ depends on !BUSYBOX_READPROFILE || ALLYES
+ help
+ The readprofile command uses the /proc/profile information
+ to print ascii data on standard output. The output is
+ organized in three columns: the first is the number of
+ clock ticks, the second is the name of the C function
+ in the kernel where those many ticks occurred, and the
+ third is the normalized `load' of the procedure, calculated
+ as a ratio between the number of ticks and the length of the
+ procedure. The output is filled with blanks to ease readability.
-config UTIL_LINUX_NG_SULOGIN
+comment "BusyBox' readprofile is selected!"
+ depends on BUSYBOX_READPROFILE
+
+config UTIL_LINUX_NG_SWAPON
bool
- depends on !BUSYBOX_SULOGIN || ALLYES
- prompt "sulogin"
+ prompt "swapon"
+ select UTIL_LINUX_NG_LIBBLKID
+ select UTIL_LINUX_NG_LIBMOUNT
+ select UTIL_LINUX_NG_LIBSMARTCOLS
+ depends on !BUSYBOX_SWAPON || ALLYES
help
- sulogin is invoked by init when the system goes into
- single-user mode.
+ Swapon is used to specify devices on which paging and swapping are to take place.
-comment "BusyBox' sulogin is selected!"
- depends on BUSYBOX_SULOGIN
+comment "BusyBox' swapon is selected!"
+ depends on BUSYBOX_SWAPON
config UTIL_LINUX_NG_SWITCH_ROOT
bool
@@ -525,14 +492,61 @@ config UTIL_LINUX_NG_SWITCH_ROOT
comment "BusyBox' switch_root is selected!"
depends on BUSYBOX_SWITCH_ROOT
-config UTIL_LINUX_NG_PIVOT_ROOT
+config UTIL_LINUX_NG_UMOUNT
bool
- depends on !BUSYBOX_PIVOT_ROOT
- prompt "pivot_root"
+ prompt "umount"
+ select UTIL_LINUX_NG_MOUNT
+ depends on !BUSYBOX_MOUNT || ALLYES
+ depends on !BUSYBOX_UMOUNT || ALLYES
help
- change the root filesystem.
+ The mount(8) command serves to attach the file system
+ found on some device to the big file tree.
+ Conversely, the umount(8) command will detach it again.
-comment "BusyBox' pivot_root is selected!"
- depends on BUSYBOX_PIVOT_ROOT
+comment "BusyBox' umount is selected!"
+ depends on BUSYBOX_UMOUNT
+
+config UTIL_LINUX_NG_WDCTL
+ bool
+ prompt "wdctl"
+ help
+ wdctl - Utility to show hardware watchdog status.
+
+config UTIL_LINUX_NG_ZRAMCTL
+ bool
+ prompt "zramctl"
+ help
+ The zramctl program is a tool to set up and control zram devices.
+
+comment "term-utils"
+
+config UTIL_LINUX_NG_AGETTY
+ bool
+ prompt "agetty"
+ help
+ A small getty.
+
+config UTIL_LINUX_NG_SETTERM
+ bool
+ select UTIL_LINUX_NG_USES_NCURSES
+ prompt "setterm"
+ help
+ setterm - set terminal attributes like terminal name, cursor
+ blinking and beeper sound
+
+comment "text-utils"
+
+config UTIL_LINUX_NG_COLUMN
+ bool
+ select UTIL_LINUX_NG_LIBSMARTCOLS
+ prompt "column"
+ help
+ Columnate lists.
+
+config UTIL_LINUX_NG_LINE
+ bool
+ prompt "line"
+ help
+ The line utility.
endif
--
2.32.0
next reply other threads:[~2022-09-29 17:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-29 17:51 Ladislav Michl [this message]
2022-09-29 17:54 ` [ptxdist] [PATCH 2/3] util-linux-ng: Use for loop to install libs and tools Ladislav Michl
2022-10-19 5:41 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-09-29 17:54 ` [ptxdist] [PATCH v2 3/3] util-linux-ng: Rename to util-linux Ladislav Michl
2022-10-18 5:52 ` Ladislav Michl
2022-10-18 7:17 ` Michael Olbrich
2022-10-19 5:41 ` [ptxdist] [APPLIED] util-linux-ng: Sort config entries Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YzXbGm4dIjrsj/PR@lenoch \
--to=oss-lists@triops.cz \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox