From: Ladislav Michl <oss-lists@triops.cz>
To: ptxdist@pengutronix.de
Subject: [ptxdist] [PATCH] util-linux-ng: Rename to util-linux
Date: Sun, 25 Sep 2022 10:10:06 +0200 [thread overview]
Message-ID: <YzAM3s9TH8Byi/75@lenoch> (raw)
From: Ladislav Michl <ladis@linux-mips.org>
The util-linux-ng project has been renamed back to util-linux as
per maintainer's annoucement dated 1 Dec 2010:
https://lkml.org/lkml/2010/12/1/464
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
This one applies on top of previous two patches. Now sure
if it is worth renaming, so consider it as an RFC :)
rules/ecryptfs-utils.in | 2 +-
rules/glib.in | 4 +-
rules/host-e2fsprogs.in | 2 +-
rules/host-libblkid.in | 6 +-
rules/host-libuuid.in | 6 +-
rules/host-systemd.in | 2 +-
rules/host-util-linux-ng.in | 7 -
rules/host-util-linux.in | 7 +
...til-linux-ng.make => host-util-linux.make} | 8 +-
rules/libblkid.in | 8 +-
rules/libuuid.in | 8 +-
rules/machine-id.in | 4 +-
rules/nfsutils.in | 4 +-
rules/owfs.in | 6 +-
rules/rauc.in | 2 +-
rules/systemd.in | 6 +-
rules/util-linux-ng.make | 273 ------------------
rules/{util-linux-ng.in => util-linux.in} | 216 +++++++-------
rules/util-linux.make | 273 ++++++++++++++++++
rules/xorg-app-xinit.in | 4 +-
scripts/migrate/migrate_ptx | 7 +
21 files changed, 431 insertions(+), 424 deletions(-)
delete mode 100644 rules/host-util-linux-ng.in
create mode 100644 rules/host-util-linux.in
rename rules/{host-util-linux-ng.make => host-util-linux.make} (88%)
delete mode 100644 rules/util-linux-ng.make
rename rules/{util-linux-ng.in => util-linux.in} (74%)
create mode 100644 rules/util-linux.make
diff --git a/rules/ecryptfs-utils.in b/rules/ecryptfs-utils.in
index 60025ae27..ee7e131ad 100644
--- a/rules/ecryptfs-utils.in
+++ b/rules/ecryptfs-utils.in
@@ -15,7 +15,7 @@ menuconfig ECRYPTFS_UTILS
select COREUTILS_STAT if ECRYPTFS_UTILS_TESTS
select COREUTILS_TR if ECRYPTFS_UTILS_TESTS
select COREUTILS_TRUNCATE if ECRYPTFS_UTILS_TESTS
- select UTIL_LINUX_NG_MKFS if ECRYPTFS_UTILS_TESTS
+ select UTIL_LINUX_MKFS if ECRYPTFS_UTILS_TESTS
help
eCryptfs is a POSIX-compliant enterprise-class stacked
cryptographic filesystem for Linux.
diff --git a/rules/glib.in b/rules/glib.in
index d4215a0df..140bf0131 100644
--- a/rules/glib.in
+++ b/rules/glib.in
@@ -10,8 +10,8 @@ menuconfig GLIB
select LIBFFI
select LIBPCRE
select LIBPCRE_ENABLE_UTF8
- select UTIL_LINUX_NG if GLIB_LIBMOUNT
- select UTIL_LINUX_NG_LIBMOUNT if GLIB_LIBMOUNT
+ select UTIL_LINUX if GLIB_LIBMOUNT
+ select UTIL_LINUX_LIBMOUNT if GLIB_LIBMOUNT
select ZLIB
help
GLib is a library containing many useful C routines for things
diff --git a/rules/host-e2fsprogs.in b/rules/host-e2fsprogs.in
index 122b0ba31..e203b2d7a 100644
--- a/rules/host-e2fsprogs.in
+++ b/rules/host-e2fsprogs.in
@@ -2,7 +2,7 @@
config HOST_E2FSPROGS
tristate
- select HOST_UTIL_LINUX_NG
+ select HOST_UTIL_LINUX
default y if ALLYES
help
Useful hosttools for management of ext2 and ext3 filesystems
diff --git a/rules/host-libblkid.in b/rules/host-libblkid.in
index 3b56df248..6a56299ef 100644
--- a/rules/host-libblkid.in
+++ b/rules/host-libblkid.in
@@ -3,12 +3,12 @@
config HOST_LIBBLKID
tristate
select VIRTUAL
- select HOST_UTIL_LINUX_NG
+ select HOST_UTIL_LINUX
default y if ALLYES
help
Helper to select the host packet containing a recent libblkid.so
library and its header.
The following packages provide libblkid:
- - e2fsprogs (older version)
- - utils-linux-ng (more recent version)
+ - e2fsprogs (older version)
+ - utils-linux (more recent version)
diff --git a/rules/host-libuuid.in b/rules/host-libuuid.in
index e1dc15120..e4509c44b 100644
--- a/rules/host-libuuid.in
+++ b/rules/host-libuuid.in
@@ -3,12 +3,12 @@
config HOST_LIBUUID
tristate
select VIRTUAL
- select HOST_UTIL_LINUX_NG
+ select HOST_UTIL_LINUX
default y if ALLYES
help
Helper to select the host packet containing a recent libuuid.so
library and its header.
The following packages provide libuuid:
- - e2fsprogs (older version)
- - utils-linux-ng (more recent version)
+ - e2fsprogs (older version)
+ - utils-linux (more recent version)
diff --git a/rules/host-systemd.in b/rules/host-systemd.in
index 7e14ac8bf..d5c0ed0b5 100644
--- a/rules/host-systemd.in
+++ b/rules/host-systemd.in
@@ -7,5 +7,5 @@ config HOST_SYSTEMD
select HOST_SYSTEM_PYTHON3_JINJA2
select HOST_MESON
select HOST_GPERF
- select HOST_UTIL_LINUX_NG
+ select HOST_UTIL_LINUX
select HOST_LIBCAP
diff --git a/rules/host-util-linux-ng.in b/rules/host-util-linux-ng.in
deleted file mode 100644
index 853a86878..000000000
--- a/rules/host-util-linux-ng.in
+++ /dev/null
@@ -1,7 +0,0 @@
-## SECTION=hosttools_noprompt
-
-config HOST_UTIL_LINUX_NG
- tristate
- default y if ALLYES
- help
- Useful hosttools and libs for linux ng utils.
diff --git a/rules/host-util-linux.in b/rules/host-util-linux.in
new file mode 100644
index 000000000..52bd59722
--- /dev/null
+++ b/rules/host-util-linux.in
@@ -0,0 +1,7 @@
+## SECTION=hosttools_noprompt
+
+config HOST_UTIL_LINUX
+ tristate
+ default y if ALLYES
+ help
+ Useful hosttools and libs for linux utils.
diff --git a/rules/host-util-linux-ng.make b/rules/host-util-linux.make
similarity index 88%
rename from rules/host-util-linux-ng.make
rename to rules/host-util-linux.make
index 3e02b22e0..c4a206868 100644
--- a/rules/host-util-linux-ng.make
+++ b/rules/host-util-linux.make
@@ -9,12 +9,12 @@
#
# We provide this package
#
-HOST_PACKAGES-$(PTXCONF_HOST_UTIL_LINUX_NG) += host-util-linux-ng
+HOST_PACKAGES-$(PTXCONF_HOST_UTIL_LINUX) += host-util-linux
#
# Paths and names
#
-HOST_UTIL_LINUX_NG_DIR = $(HOST_BUILDDIR)/$(UTIL_LINUX_NG)
+HOST_UTIL_LINUX_DIR = $(HOST_BUILDDIR)/$(UTIL_LINUX)
# ----------------------------------------------------------------------------
# Prepare
@@ -24,8 +24,8 @@ HOST_UTIL_LINUX_NG_DIR = $(HOST_BUILDDIR)/$(UTIL_LINUX_NG)
# autoconf
#
-HOST_UTIL_LINUX_NG_CONF_TOOL := autoconf
-HOST_UTIL_LINUX_NG_CONF_OPT := \
+HOST_UTIL_LINUX_CONF_TOOL := autoconf
+HOST_UTIL_LINUX_CONF_OPT := \
$(HOST_AUTOCONF) \
--disable-werror \
--disable-asan \
diff --git a/rules/libblkid.in b/rules/libblkid.in
index d6556feb0..38ebb2764 100644
--- a/rules/libblkid.in
+++ b/rules/libblkid.in
@@ -3,12 +3,12 @@
config LIBBLKID
tristate
select VIRTUAL
- select UTIL_LINUX_NG
- select UTIL_LINUX_NG_LIBBLKID
+ select UTIL_LINUX
+ select UTIL_LINUX_LIBBLKID
help
Helper to select the target packet containing a recent libblkid.so
library and its header.
The following packages provide libblkid:
- - e2fsprogs (older version)
- - utils-linux-ng (more recent version)
+ - e2fsprogs (older version)
+ - utils-linux (more recent version)
diff --git a/rules/libuuid.in b/rules/libuuid.in
index 743d5f5df..88b175520 100644
--- a/rules/libuuid.in
+++ b/rules/libuuid.in
@@ -3,12 +3,12 @@
config LIBUUID
tristate
select VIRTUAL
- select UTIL_LINUX_NG
- select UTIL_LINUX_NG_LIBUUID
+ select UTIL_LINUX
+ select UTIL_LINUX_LIBUUID
help
Helper to select the target packet containing a recent libuuid.so
library and its header.
The following packages provide libuuid:
- - e2fsprogs (older version)
- - utils-linux-ng (more recent version)
+ - e2fsprogs (older version)
+ - utils-linux (more recent version)
diff --git a/rules/machine-id.in b/rules/machine-id.in
index 4c6aa6902..8db7cd381 100644
--- a/rules/machine-id.in
+++ b/rules/machine-id.in
@@ -4,8 +4,8 @@ menuconfig MACHINE_ID
tristate
prompt "create /etc/machine-id "
select RC_ONCE if MACHINE_ID_RC_ONCE && RUNTIME
- select UTIL_LINUX_NG if MACHINE_ID_RC_ONCE && !INITMETHOD_SYSTEMD
- select UTIL_LINUX_NG_UUIDGEN if MACHINE_ID_RC_ONCE && !INITMETHOD_SYSTEMD
+ select UTIL_LINUX if MACHINE_ID_RC_ONCE && !INITMETHOD_SYSTEMD
+ select UTIL_LINUX_UUIDGEN if MACHINE_ID_RC_ONCE && !INITMETHOD_SYSTEMD
help
Enable this to make sure there is always a unique /etc/machine-id
available in the system.
diff --git a/rules/nfsutils.in b/rules/nfsutils.in
index 95f123954..f37f22506 100644
--- a/rules/nfsutils.in
+++ b/rules/nfsutils.in
@@ -6,8 +6,8 @@ menuconfig NFSUTILS
select GCCLIBS_GCC_S
select LIBBLKID
select LIBTIRPC
- select UTIL_LINUX_NG
- select UTIL_LINUX_NG_LIBMOUNT
+ select UTIL_LINUX
+ select UTIL_LINUX_LIBMOUNT
select RPCBIND if RUNTIME
select ROOTFS_PROTOCOLS if NFSUTILS_CLIENT
select PYTHON3 if NFSUTILS_PYTHON && RUNTIME
diff --git a/rules/owfs.in b/rules/owfs.in
index d08bf9a11..59ea7fbca 100644
--- a/rules/owfs.in
+++ b/rules/owfs.in
@@ -16,9 +16,9 @@ menuconfig OWFS
select FUSE_LIB if OWFS_OWFS
depends on !BUSYBOX_MOUNT || ALLYES
depends on !BUSYBOX_UMOUNT || ALLYES
- select UTIL_LINUX_NG if OWFS_OWFS
- select UTIL_LINUX_NG_MOUNT if OWFS_OWFS
- select UTIL_LINUX_NG_UMOUNT if OWFS_OWFS
+ select UTIL_LINUX if OWFS_OWFS
+ select UTIL_LINUX_MOUNT if OWFS_OWFS
+ select UTIL_LINUX_UMOUNT if OWFS_OWFS
help
OWFS is the 1-Wire file system. It is used by Dallas 1-Wire and iButton
chips with standard linux commands. Create temperature loggers. Monitor
diff --git a/rules/rauc.in b/rules/rauc.in
index fa24fa61d..db3a87485 100644
--- a/rules/rauc.in
+++ b/rules/rauc.in
@@ -15,7 +15,7 @@ menuconfig RAUC
select LIBCURL if RAUC_NETWORK
select LIBNL3 if RAUC_STREAMING
select JSON_GLIB if RAUC_JSON
- select UTIL_LINUX_NG_LIBFDISK if RAUC_GPT
+ select UTIL_LINUX_LIBFDISK if RAUC_GPT
select SQUASHFS_TOOLS if RUNTIME
select SQUASHFS_TOOLS_UNSQUASHFS if RUNTIME
select DT_UTILS if RUNTIME && RAUC_BAREBOX
diff --git a/rules/systemd.in b/rules/systemd.in
index 40a80b793..ba8301443 100644
--- a/rules/systemd.in
+++ b/rules/systemd.in
@@ -17,9 +17,9 @@ menuconfig SYSTEMD
select LIBCAP
select LIBKMOD
select LIBKMOD_TOOLS
- select UTIL_LINUX_NG
- select UTIL_LINUX_NG_LIBMOUNT
- select UTIL_LINUX_NG_LIBFDISK if SYSTEMD_REPART
+ select UTIL_LINUX
+ select UTIL_LINUX_LIBMOUNT
+ select UTIL_LINUX_LIBFDISK if SYSTEMD_REPART
select MACHINE_ID if RUNTIME
select XZ if SYSTEMD_XZ
select LZ4 if SYSTEMD_LZ4
diff --git a/rules/util-linux-ng.make b/rules/util-linux-ng.make
deleted file mode 100644
index f5e57a56f..000000000
--- a/rules/util-linux-ng.make
+++ /dev/null
@@ -1,273 +0,0 @@
-# -*-makefile-*-
-#
-# Copyright (C) 2008 by Robert Schwebel
-# 2010 by Marc Kleine-Budde <mkl@penutronix.de>
-#
-# For further information about the PTXdist project and license conditions
-# see the README file.
-#
-
-#
-# We provide this package
-#
-PACKAGES-$(PTXCONF_UTIL_LINUX_NG) += util-linux-ng
-
-#
-# Paths and names
-#
-UTIL_LINUX_NG_VERSION := 2.38.1
-UTIL_LINUX_NG_MD5 := cd11456f4ddd31f7fbfdd9488c0c0d02
-UTIL_LINUX_NG := util-linux-$(UTIL_LINUX_NG_VERSION)
-UTIL_LINUX_NG_SUFFIX := tar.xz
-UTIL_LINUX_NG_BASENAME := v$(if $(filter 2,$(basename $(UTIL_LINUX_NG_VERSION))),$(UTIL_LINUX_NG_VERSION),$(basename $(UTIL_LINUX_NG_VERSION)))
-UTIL_LINUX_NG_URL := $(call ptx/mirror, KERNEL, utils/util-linux/$(UTIL_LINUX_NG_BASENAME)/$(UTIL_LINUX_NG).$(UTIL_LINUX_NG_SUFFIX))
-UTIL_LINUX_NG_SOURCE := $(SRCDIR)/$(UTIL_LINUX_NG).$(UTIL_LINUX_NG_SUFFIX)
-UTIL_LINUX_NG_DIR := $(BUILDDIR)/$(UTIL_LINUX_NG)
-UTIL_LINUX_NG_LICENSE := GPL-2.0-only AND GPL-2.0-or-later AND LGPL-2.0-or-later AND BSD-3-Clause AND BSD-4-Clause AND public_domain
-UTIL_LINUX_NG_LICENSE_FILES := \
- file://Documentation/licenses/COPYING.GPL-2.0-or-later;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
- file://Documentation/licenses/COPYING.BSD-3-Clause;md5=58dcd8452651fc8b07d1f65ce07ca8af \
- file://Documentation/licenses/COPYING.BSD-4-Clause-UC;md5=263860f8968d8bafa5392cab74285262 \
- file://Documentation/licenses/COPYING.LGPL-2.1-or-later;md5=4fbd65380cdd255951079008b364516c
-
-# ----------------------------------------------------------------------------
-# Prepare
-# ----------------------------------------------------------------------------
-
-UTIL_LINUX_NG_CONF_ENV := \
- $(CROSS_ENV) \
- $(call ptx/ncurses, PTXCONF_UTIL_LINUX_NG_USES_NCURSES) \
- scanf_cv_type_modifier=as \
- ac_cv_path_BLKID=no \
- ac_cv_path_PERL=no \
- ac_cv_path_VOLID=no
-
-#
-# autoconf
-#
-UTIL_LINUX_NG_CONF_TOOL := autoconf
-UTIL_LINUX_NG_CONF_OPT := \
- $(CROSS_AUTOCONF_USR) \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --disable-werror \
- --disable-asan \
- --disable-ubsan \
- --disable-fuzzing-engine \
- --enable-shared \
- --disable-static \
- --enable-symvers \
- --disable-gtk-doc \
- $(GLOBAL_LARGE_FILE_OPTION) \
- --enable-assert \
- --disable-nls \
- --disable-rpath \
- --disable-static-programs \
- --enable-all-programs=undefined \
- --disable-asciidoc \
- --disable-poman \
- --enable-tls \
- --disable-widechar \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_LIBUUID)-libuuid \
- --disable-libuuid-force-uuidd \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_LIBBLKID)-libblkid \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_LIBMOUNT)-libmount \
- --disable-libmount-support-mtab \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_LIBSMARTCOLS)-libsmartcols \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_LIBFDISK)-libfdisk \
- $(call ptx/ifdef, PTXCONF_UTIL_LINUX_NG_FDISKS,,--disable-fdisks) \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_MOUNT)-mount \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_LOSETUP)-losetup \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_ZRAMCTL)-zramctl \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_FSCK)-fsck \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_PARTX_TOOLS)-partx \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_UUIDD)-uuidd \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_UUIDGEN)-uuidgen \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_BLKID)-blkid \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_WIPEFS)-wipefs \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_MOUNTPOINT)-mountpoint \
- --disable-fallocate \
- --disable-unshare \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_NSENTER)-nsenter \
- --disable-setpriv \
- --disable-hardlink \
- --disable-eject \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_AGETTY)-agetty \
- --disable-plymouth_support \
- --disable-cramfs \
- --disable-bfs \
- --disable-minix \
- --disable-fdformat \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_HWCLOCK)-hwclock \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_MKFS)-mkfs \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_FSTRIM)-fstrim \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_SWAPON)-swapon \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_LSCPU)-lscpu \
- --disable-lslogins \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_WDCTL)-wdctl \
- --disable-cal \
- --disable-logger \
- --disable-whereis \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_SWITCH_ROOT)-switch_root \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_PIVOT_ROOT)-pivot_root \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_LSMEM)-lsmem \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_CHMEM)-chmem \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_IPCRM)-ipcrm \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_IPCS)-ipcs \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_IRQTOP)-irqtop \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_LSIRQ)-lsirq \
- --disable-rfkill \
- --disable-scriptutils \
- --disable-tunelp \
- --disable-kill \
- --disable-last \
- --disable-utmpdump \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_LINE)-line \
- --disable-mesg \
- --disable-raw \
- --disable-rename \
- --disable-vipw \
- --disable-newgrp \
- --disable-chfn-chsh-password \
- --disable-chfn-chsh \
- --disable-chsh-only-listed \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_LOGIN)-login \
- --disable-login-chown-vcs \
- --disable-login-stat-mail \
- --disable-nologin \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_SULOGIN)-sulogin \
- --disable-su \
- --disable-runuser \
- --disable-ul \
- --disable-more \
- --disable-pg \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_SETTERM)-setterm \
- --$(call ptx/endis, PTXCONF_UTIL_LINUX_NG_SCHEDUTILS)-schedutils \
- --disable-wall \
- --disable-write \
- --disable-bash-completion \
- --disable-pylibmount \
- --disable-pg-bell \
- --disable-use-tty-group \
- --disable-sulogin-emergency-mount \
- --disable-usrdir-path \
- --disable-makeinstall-chown \
- --disable-makeinstall-setuid \
- --disable-colors-default \
- --without-libiconv-prefix \
- --without-libintl-prefix \
- --with-util \
- --without-selinux \
- --without-audit \
- --without-udev \
- --without-ncursesw \
- --$(call ptx/wwo, PTXCONF_UTIL_LINUX_NG_USES_NCURSES)-ncurses \
- --without-slang \
- --without-tinfo \
- --without-readline \
- --without-utempter \
- --without-cap-ng \
- --without-libz \
- --without-libmagic \
- --without-user \
- --without-btrfs \
- --without-systemd \
- --with-systemdsystemunitdir=/usr/lib/systemd/system \
- --without-smack \
- --without-econf \
- --without-python \
- --without-cryptsetup
-
-# ----------------------------------------------------------------------------
-# Target-Install
-# ----------------------------------------------------------------------------
-
-UTIL_LINUX_LIB-y :=
-UTIL_LINUX_BIN-y :=
-
-# libraries
-UTIL_LINUX_LIB-$(PTXCONF_UTIL_LINUX_NG_LIBBLKID) += blkid
-UTIL_LINUX_LIB-$(PTXCONF_UTIL_LINUX_NG_LIBUUID) += uuid
-UTIL_LINUX_LIB-$(PTXCONF_UTIL_LINUX_NG_LIBMOUNT) += mount
-UTIL_LINUX_LIB-$(PTXCONF_UTIL_LINUX_NG_LIBSMARTCOLS) += smartcols
-UTIL_LINUX_LIB-$(PTXCONF_UTIL_LINUX_NG_LIBFDISK) += fdisk
-
-# disk-utils
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_ADDPART) += sbin/addpart
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_CFDISK) += sbin/cfdisk
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_DELPART) += sbin/delpart
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_FDISK) += sbin/fdisk
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_FSCK) += sbin/fsck
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_MKFS) += sbin/mkfs
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_MKSWAP) += sbin/mkswap
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_PARTX) += sbin/partx
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_SFDISK) += sbin/sfdisk
-# login-utils
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_LOGIN) += bin/login
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_SULOGIN) += sbin/sulogin
-# misc-utils
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_BLKID) += sbin/blkid
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_FINDFS) += sbin/findfs
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_GETOPT) += bin/getopt
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_LSBLK) += bin/lsblk
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_MCOOKIE) += bin/mcookie
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_UUIDD) += sbin/uuidd
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_UUIDGEN) += bin/uuidgen
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_WIPEFS) += sbin/wipefs
-# schedutils
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_CHRT) += bin/chrt
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_IONICE) += bin/ionice
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_TASKSET) += bin/taskset
-# sys-utils
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_CHMEM) += bin/chmem
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_DMESG) += bin/dmesg
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_FLOCK) += bin/flock
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_FSFREEZE) += sbin/fsfreeze
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_FSTRIM) += sbin/fstrim
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_HWCLOCK) += sbin/hwclock
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_IPCRM) += bin/ipcrm
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_IPCS) += bin/ipcs
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_IRQTOP) += bin/irqtop
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_LDATTACH) += sbin/ldattach
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_LOSETUP) += sbin/losetup
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_LSCPU) += bin/lscpu
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_LSIRQ) += bin/lsirq
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_LSMEM) += bin/lsmem
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_MOUNT) += bin/mount
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_MOUNTPOINT) += bin/mountpoint
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_NSENTER) += bin/nsenter
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_PIVOT_ROOT) += sbin/pivot_root
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_READPROFILE) += sbin/readprofile
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_SWAPON) += sbin/swapoff sbin/swapon
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_SWITCH_ROOT) += sbin/switch_root
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_UMOUNT) += bin/umount
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_WDCTL) += bin/wdctl
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_ZRAMCTL) += sbin/zramctl
-# term-utils
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_AGETTY) += sbin/agetty
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_SETTERM) += bin/setterm
-# text-utils
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_COLUMN) += bin/column
-UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NG_LINE) += bin/line
-
-$(STATEDIR)/util-linux-ng.targetinstall:
- @$(call targetinfo)
-
- @$(call install_init, util-linux-ng)
- @$(call install_fixup, util-linux-ng,PRIORITY,optional)
- @$(call install_fixup, util-linux-ng,SECTION,base)
- @$(call install_fixup, util-linux-ng,AUTHOR,"Robert Schwebel <r.schwebel@pengutronix.de>")
- @$(call install_fixup, util-linux-ng,DESCRIPTION,missing)
-
- @$(foreach lib, $(UTIL_LINUX_LIB-y), \
- $(call install_lib, util-linux-ng, 0, 0, 0644, lib$(lib));)
-
- @$(foreach tool, $(UTIL_LINUX_BIN-y), \
- $(call install_copy, util-linux-ng, 0, 0, 0755, -, \
- /usr/$(tool));)
-
- @$(call install_finish, util-linux-ng)
-
- @$(call touch)
-
-# vim: syntax=make
diff --git a/rules/util-linux-ng.in b/rules/util-linux.in
similarity index 74%
rename from rules/util-linux-ng.in
rename to rules/util-linux.in
index 772d913ff..429473404 100644
--- a/rules/util-linux-ng.in
+++ b/rules/util-linux.in
@@ -1,81 +1,81 @@
## SECTION=shell_and_console
-menuconfig UTIL_LINUX_NG
+menuconfig UTIL_LINUX
tristate
prompt "util-linux "
select GCCLIBS_GCC_S
- select UTIL_LINUX_NG_LIBBLKID
- select UTIL_LINUX_NG_LIBUUID if UTIL_LINUX_NG_MKSWAP_UUID
- select NCURSES if UTIL_LINUX_NG_USES_NCURSES
- select PAM if UTIL_LINUX_NG_USES_PAM
+ select UTIL_LINUX_LIBBLKID
+ select UTIL_LINUX_LIBUUID if UTIL_LINUX_MKSWAP_UUID
+ select NCURSES if UTIL_LINUX_USES_NCURSES
+ select PAM if UTIL_LINUX_USES_PAM
-if UTIL_LINUX_NG
+if UTIL_LINUX
-config UTIL_LINUX_NG_LIBBLKID
+config UTIL_LINUX_LIBBLKID
bool
-config UTIL_LINUX_NG_LIBUUID
+config UTIL_LINUX_LIBUUID
bool
-config UTIL_LINUX_NG_LIBMOUNT
+config UTIL_LINUX_LIBMOUNT
bool
-config UTIL_LINUX_NG_LIBSMARTCOLS
+config UTIL_LINUX_LIBSMARTCOLS
bool
-config UTIL_LINUX_NG_LIBFDISK
- select UTIL_LINUX_NG_LIBUUID
+config UTIL_LINUX_LIBFDISK
+ select UTIL_LINUX_LIBUUID
bool
-config UTIL_LINUX_NG_FDISKS
+config UTIL_LINUX_FDISKS
bool
-config UTIL_LINUX_NG_USES_NCURSES
+config UTIL_LINUX_USES_NCURSES
bool
-config UTIL_LINUX_NG_USES_PAM
+config UTIL_LINUX_USES_PAM
bool
-config UTIL_LINUX_NG_PARTX_TOOLS
- select UTIL_LINUX_NG_LIBBLKID
- select UTIL_LINUX_NG_LIBSMARTCOLS
+config UTIL_LINUX_PARTX_TOOLS
+ select UTIL_LINUX_LIBBLKID
+ select UTIL_LINUX_LIBSMARTCOLS
bool
-config UTIL_LINUX_NG_SCHEDUTILS
+config UTIL_LINUX_SCHEDUTILS
bool
comment "disk-utils"
-config UTIL_LINUX_NG_ADDPART
+config UTIL_LINUX_ADDPART
bool
- select UTIL_LINUX_NG_PARTX_TOOLS
+ select UTIL_LINUX_PARTX_TOOLS
prompt "addpart"
help
The addpart utility.
-config UTIL_LINUX_NG_CFDISK
+config UTIL_LINUX_CFDISK
bool
- select UTIL_LINUX_NG_LIBFDISK
- select UTIL_LINUX_NG_LIBSMARTCOLS
- select UTIL_LINUX_NG_FDISKS
- select UTIL_LINUX_NG_USES_NCURSES
+ select UTIL_LINUX_LIBFDISK
+ select UTIL_LINUX_LIBSMARTCOLS
+ select UTIL_LINUX_FDISKS
+ select UTIL_LINUX_USES_NCURSES
prompt "cfdisk"
help
cfdisk is a curses based program for partitioning any hard disk drive.
-config UTIL_LINUX_NG_DELPART
+config UTIL_LINUX_DELPART
bool
- select UTIL_LINUX_NG_PARTX_TOOLS
+ select UTIL_LINUX_PARTX_TOOLS
prompt "delpart"
help
The delpart utility.
-config UTIL_LINUX_NG_FDISK
+config UTIL_LINUX_FDISK
bool
prompt "fdisk"
- select UTIL_LINUX_NG_LIBFDISK
- select UTIL_LINUX_NG_LIBSMARTCOLS
- select UTIL_LINUX_NG_FDISKS
+ select UTIL_LINUX_LIBFDISK
+ select UTIL_LINUX_LIBSMARTCOLS
+ select UTIL_LINUX_FDISKS
depends on !BUSYBOX_FDISK || ALLYES
help
fdisk - Partition table manipulator for Linux
@@ -83,10 +83,10 @@ config UTIL_LINUX_NG_FDISK
comment "BusyBox' fdisk is selected!"
depends on BUSYBOX_FDISK
-config UTIL_LINUX_NG_FSCK
+config UTIL_LINUX_FSCK
bool
prompt "fsck"
- select UTIL_LINUX_NG_LIBMOUNT
+ select UTIL_LINUX_LIBMOUNT
depends on !BUSYBOX_FSCK || ALLYES
help
fsck is used to check and optionally repair one or
@@ -97,52 +97,52 @@ config UTIL_LINUX_NG_FSCK
comment "BusyBox' fsck is selected!"
depends on BUSYBOX_FSCK
-config UTIL_LINUX_NG_MKFS
+config UTIL_LINUX_MKFS
bool
prompt "mkfs"
help
The mkfs command is a generic wrapper for fs specific
mkfs.* commands.
-config UTIL_LINUX_NG_MKSWAP
+config UTIL_LINUX_MKSWAP
bool
prompt "mkswap"
depends on !BUSYBOX_MKSWAP || ALLYES
help
mkswap sets up a Linux swap area on a device or in a file.
-config UTIL_LINUX_NG_MKSWAP_UUID
+config UTIL_LINUX_MKSWAP_UUID
bool
prompt "enable uuid support for mkswap"
- depends on UTIL_LINUX_NG_MKSWAP
+ depends on UTIL_LINUX_MKSWAP
help
enable uuid support for mkswap
comment "BusyBox' mkswap is selected!"
depends on BUSYBOX_MKSWAP
-config UTIL_LINUX_NG_PARTX
+config UTIL_LINUX_PARTX
bool
- select UTIL_LINUX_NG_PARTX_TOOLS
+ select UTIL_LINUX_PARTX_TOOLS
prompt "partx"
help
The partx utility.
-config UTIL_LINUX_NG_SFDISK
+config UTIL_LINUX_SFDISK
bool
prompt "sfdisk"
- select UTIL_LINUX_NG_LIBFDISK
- select UTIL_LINUX_NG_LIBSMARTCOLS
- select UTIL_LINUX_NG_FDISKS
+ select UTIL_LINUX_LIBFDISK
+ select UTIL_LINUX_LIBSMARTCOLS
+ select UTIL_LINUX_FDISKS
help
sfdisk - Partition table manipulator for Linux,
scriptable for unattended partitioning
comment "login-utils"
-config UTIL_LINUX_NG_LOGIN
+config UTIL_LINUX_LOGIN
bool
- select UTIL_LINUX_NG_USES_PAM
+ select UTIL_LINUX_USES_PAM
depends on GLOBAL_PAM && ((!BUSYBOX_LOGIN && !SHADOW) || ALLYES)
prompt "login"
help
@@ -155,7 +155,7 @@ comment "BusyBox' login is selected!"
comment "Shadow package is selected!"
depends on SHADOW
-config UTIL_LINUX_NG_SULOGIN
+config UTIL_LINUX_SULOGIN
bool
depends on !BUSYBOX_SULOGIN || ALLYES
prompt "sulogin"
@@ -168,9 +168,9 @@ comment "BusyBox' sulogin is selected!"
comment "misc-utils"
-config UTIL_LINUX_NG_BLKID
+config UTIL_LINUX_BLKID
bool
- select UTIL_LINUX_NG_LIBBLKID
+ select UTIL_LINUX_LIBBLKID
depends on !BUSYBOX_BLKID || ALLYES
prompt "blkid"
help
@@ -182,9 +182,9 @@ config UTIL_LINUX_NG_BLKID
comment "BusyBox' blkid is selected!"
depends on BUSYBOX_BLKID
-config UTIL_LINUX_NG_FINDFS
+config UTIL_LINUX_FINDFS
bool
- select UTIL_LINUX_NG_LIBBLKID
+ select UTIL_LINUX_LIBBLKID
depends on !BUSYBOX_FINDFS || ALLYES
prompt "findfs"
help
@@ -194,7 +194,7 @@ config UTIL_LINUX_NG_FINDFS
comment "BusyBox' findfs is selected!"
depends on BUSYBOX_FINDFS
-config UTIL_LINUX_NG_GETOPT
+config UTIL_LINUX_GETOPT
bool
prompt "getopt"
depends on !BUSYBOX_GETOPT || ALLYES
@@ -206,26 +206,26 @@ config UTIL_LINUX_NG_GETOPT
comment "BusyBox' getopt is selected!"
depends on BUSYBOX_GETOPT
-config UTIL_LINUX_NG_LSBLK
+config UTIL_LINUX_LSBLK
bool
- select UTIL_LINUX_NG_LIBBLKID
- select UTIL_LINUX_NG_LIBMOUNT
- select UTIL_LINUX_NG_LIBSMARTCOLS
+ select UTIL_LINUX_LIBBLKID
+ select UTIL_LINUX_LIBMOUNT
+ select UTIL_LINUX_LIBSMARTCOLS
prompt "lsblk"
help
The lsblk command lists information about all available or the
specified block devices.
-config UTIL_LINUX_NG_MCOOKIE
+config UTIL_LINUX_MCOOKIE
bool
prompt "mcookie"
help
mcookie generates a 128-bit random hexadecimal number for
use with the X authority system.
-config UTIL_LINUX_NG_UUIDD
+config UTIL_LINUX_UUIDD
bool
- select UTIL_LINUX_NG_LIBUUID
+ select UTIL_LINUX_LIBUUID
prompt "uuidd"
help
The uuidd daemon is used by the UUID library to generate
@@ -233,16 +233,16 @@ config UTIL_LINUX_NG_UUIDD
in a secure and guaranteed- unique fashion, even in the face of large
numbers of threads running on different CPUs trying to grab UUIDs.
-config UTIL_LINUX_NG_UUIDGEN
+config UTIL_LINUX_UUIDGEN
bool
- select UTIL_LINUX_NG_LIBUUID
+ select UTIL_LINUX_LIBUUID
prompt "uuidgen"
help
uuidgen is a command-line utility to create a new UUID value.
-config UTIL_LINUX_NG_WIPEFS
+config UTIL_LINUX_WIPEFS
bool
- select UTIL_LINUX_NG_LIBBLKID
+ select UTIL_LINUX_LIBBLKID
prompt "wipefs"
help
The wipefs program can erase filesystem, raid or partition-table
@@ -250,10 +250,10 @@ config UTIL_LINUX_NG_WIPEFS
comment "schedutils"
-config UTIL_LINUX_NG_CHRT
+config UTIL_LINUX_CHRT
bool
prompt "chrt"
- select UTIL_LINUX_NG_SCHEDUTILS
+ select UTIL_LINUX_SCHEDUTILS
depends on !BUSYBOX_CHRT || ALLYES
help
chrt manipulates the real-time attributes of a process.
@@ -261,17 +261,17 @@ config UTIL_LINUX_NG_CHRT
comment "BusyBox' chrt is selected!"
depends on BUSYBOX_CHRT
-config UTIL_LINUX_NG_IONICE
+config UTIL_LINUX_IONICE
bool
prompt "ionice"
- select UTIL_LINUX_NG_SCHEDUTILS
+ select UTIL_LINUX_SCHEDUTILS
help
ionice gets/sets the program io scheduling class and priority.
-config UTIL_LINUX_NG_TASKSET
+config UTIL_LINUX_TASKSET
bool
prompt "taskset"
- select UTIL_LINUX_NG_SCHEDUTILS
+ select UTIL_LINUX_SCHEDUTILS
depends on !BUSYBOX_TASKSET || ALLYES
help
taskset retrieves or sets a process's CPU affinity.
@@ -281,14 +281,14 @@ comment "BusyBox' taskset is selected!"
comment "sys-utils"
-config UTIL_LINUX_NG_CHMEM
+config UTIL_LINUX_CHMEM
bool
prompt "chmem"
help
The chmem command sets a particular size or range of
memory online or offline.
-config UTIL_LINUX_NG_DMESG
+config UTIL_LINUX_DMESG
bool
depends on !BUSYBOX_DMESG || ALLYES
prompt "dmesg"
@@ -298,7 +298,7 @@ config UTIL_LINUX_NG_DMESG
comment "BusyBox' dmesg is selected!"
depends on BUSYBOX_DMESG
-config UTIL_LINUX_NG_FLOCK
+config UTIL_LINUX_FLOCK
bool
prompt "flock"
depends on !BUSYBOX_FLOCK || ALLYES
@@ -309,7 +309,7 @@ config UTIL_LINUX_NG_FLOCK
comment "BusyBox' flock is selected!"
depends on BUSYBOX_FLOCK
-config UTIL_LINUX_NG_FSFREEZE
+config UTIL_LINUX_FSFREEZE
bool
prompt "fsfreeze"
depends on !BUSYBOX_FSFREEZE || ALLYES
@@ -319,7 +319,7 @@ config UTIL_LINUX_NG_FSFREEZE
comment "BusyBox' fsfreeze is selected!"
depends on BUSYBOX_FSFREEZE
-config UTIL_LINUX_NG_FSTRIM
+config UTIL_LINUX_FSTRIM
bool
prompt "fstrim"
depends on !BUSYBOX_FSTRIM || ALLYES
@@ -331,7 +331,7 @@ config UTIL_LINUX_NG_FSTRIM
comment "BusyBox' fstrim is selected!"
depends on BUSYBOX_FSTRIM
-config UTIL_LINUX_NG_HWCLOCK
+config UTIL_LINUX_HWCLOCK
bool
prompt "hwclock"
depends on !BUSYBOX_HWCLOCK || ALLYES
@@ -344,7 +344,7 @@ config UTIL_LINUX_NG_HWCLOCK
comment "BusyBox' hwclock is selected!"
depends on BUSYBOX_HWCLOCK
-config UTIL_LINUX_NG_IPCRM
+config UTIL_LINUX_IPCRM
bool
prompt "ipcrm"
depends on !BUSYBOX_IPCRM || ALLYES
@@ -355,7 +355,7 @@ config UTIL_LINUX_NG_IPCRM
comment "BusyBox' ipcrm is selected!"
depends on BUSYBOX_IPCRM
-config UTIL_LINUX_NG_IPCS
+config UTIL_LINUX_IPCS
bool
prompt "ipcs"
depends on !BUSYBOX_IPCS || ALLYES
@@ -366,24 +366,24 @@ config UTIL_LINUX_NG_IPCS
comment "BusyBox' ipcs is selected!"
depends on BUSYBOX_IPCS
-config UTIL_LINUX_NG_IRQTOP
+config UTIL_LINUX_IRQTOP
bool
- select UTIL_LINUX_NG_USES_NCURSES
+ select UTIL_LINUX_USES_NCURSES
prompt "irqtop"
help
irqtop is a tool to observe irqs and softirqs in
a top like fashion.
-config UTIL_LINUX_NG_LDATTACH
+config UTIL_LINUX_LDATTACH
bool
prompt "ldattach"
help
attach a line discipline to a serial line
-config UTIL_LINUX_NG_LOSETUP
+config UTIL_LINUX_LOSETUP
bool
prompt "losetup"
- select UTIL_LINUX_NG_LIBSMARTCOLS
+ select UTIL_LINUX_LIBSMARTCOLS
depends on !BUSYBOX_LOSETUP || ALLYES
help
losetup is used to associate or detach a loop device with a regular
@@ -392,30 +392,30 @@ config UTIL_LINUX_NG_LOSETUP
comment "BusyBox' losetup is selected!"
depends on BUSYBOX_LOSETUP
-config UTIL_LINUX_NG_LSCPU
+config UTIL_LINUX_LSCPU
bool
- select UTIL_LINUX_NG_LIBSMARTCOLS
+ select UTIL_LINUX_LIBSMARTCOLS
prompt "lscpu"
help
lscpu shows information about the CPU architecture
-config UTIL_LINUX_NG_LSIRQ
+config UTIL_LINUX_LSIRQ
bool
prompt "lsirq"
help
lsirq is a tool to list kernel interrupt information.
-config UTIL_LINUX_NG_LSMEM
+config UTIL_LINUX_LSMEM
bool
prompt "lsmem"
help
The lsmem command lists the ranges of available memory and
it's online status.
-config UTIL_LINUX_NG_MOUNT
+config UTIL_LINUX_MOUNT
bool
prompt "mount"
- select UTIL_LINUX_NG_LIBMOUNT
+ select UTIL_LINUX_LIBMOUNT
depends on !BUSYBOX_MOUNT || ALLYES
help
The mount command serves to attach the file system
@@ -424,9 +424,9 @@ config UTIL_LINUX_NG_MOUNT
comment "BusyBox' mount is selected!"
depends on BUSYBOX_MOUNT
-config UTIL_LINUX_NG_MOUNTPOINT
+config UTIL_LINUX_MOUNTPOINT
bool
- select UTIL_LINUX_NG_LIBMOUNT
+ select UTIL_LINUX_LIBMOUNT
depends on !BUSYBOX_MOUNTPOINT || ALLYES
prompt "mountpoint"
help
@@ -435,13 +435,13 @@ config UTIL_LINUX_NG_MOUNTPOINT
comment "BusyBox' mountpoint is selected!"
depends on BUSYBOX_MOUNTPOINT
-config UTIL_LINUX_NG_NSENTER
+config UTIL_LINUX_NSENTER
bool
prompt "nsenter"
help
The nsenter utility
-config UTIL_LINUX_NG_PIVOT_ROOT
+config UTIL_LINUX_PIVOT_ROOT
bool
depends on !BUSYBOX_PIVOT_ROOT
prompt "pivot_root"
@@ -451,7 +451,7 @@ config UTIL_LINUX_NG_PIVOT_ROOT
comment "BusyBox' pivot_root is selected!"
depends on BUSYBOX_PIVOT_ROOT
-config UTIL_LINUX_NG_READPROFILE
+config UTIL_LINUX_READPROFILE
bool
prompt "readprofile"
depends on !BUSYBOX_READPROFILE || ALLYES
@@ -468,12 +468,12 @@ config UTIL_LINUX_NG_READPROFILE
comment "BusyBox' readprofile is selected!"
depends on BUSYBOX_READPROFILE
-config UTIL_LINUX_NG_SWAPON
+config UTIL_LINUX_SWAPON
bool
prompt "swapon"
- select UTIL_LINUX_NG_LIBBLKID
- select UTIL_LINUX_NG_LIBMOUNT
- select UTIL_LINUX_NG_LIBSMARTCOLS
+ select UTIL_LINUX_LIBBLKID
+ select UTIL_LINUX_LIBMOUNT
+ select UTIL_LINUX_LIBSMARTCOLS
depends on !BUSYBOX_SWAPON || ALLYES
help
Swapon is used to specify devices on which paging and swapping are to take place.
@@ -481,7 +481,7 @@ config UTIL_LINUX_NG_SWAPON
comment "BusyBox' swapon is selected!"
depends on BUSYBOX_SWAPON
-config UTIL_LINUX_NG_SWITCH_ROOT
+config UTIL_LINUX_SWITCH_ROOT
bool
depends on !BUSYBOX_SWITCH_ROOT
prompt "switch_root"
@@ -492,10 +492,10 @@ config UTIL_LINUX_NG_SWITCH_ROOT
comment "BusyBox' switch_root is selected!"
depends on BUSYBOX_SWITCH_ROOT
-config UTIL_LINUX_NG_UMOUNT
+config UTIL_LINUX_UMOUNT
bool
prompt "umount"
- select UTIL_LINUX_NG_MOUNT
+ select UTIL_LINUX_MOUNT
depends on !BUSYBOX_MOUNT || ALLYES
depends on !BUSYBOX_UMOUNT || ALLYES
help
@@ -506,13 +506,13 @@ config UTIL_LINUX_NG_UMOUNT
comment "BusyBox' umount is selected!"
depends on BUSYBOX_UMOUNT
-config UTIL_LINUX_NG_WDCTL
+config UTIL_LINUX_WDCTL
bool
prompt "wdctl"
help
wdctl - Utility to show hardware watchdog status.
-config UTIL_LINUX_NG_ZRAMCTL
+config UTIL_LINUX_ZRAMCTL
bool
prompt "zramctl"
help
@@ -520,15 +520,15 @@ config UTIL_LINUX_NG_ZRAMCTL
comment "term-utils"
-config UTIL_LINUX_NG_AGETTY
+config UTIL_LINUX_AGETTY
bool
prompt "agetty"
help
A small getty.
-config UTIL_LINUX_NG_SETTERM
+config UTIL_LINUX_SETTERM
bool
- select UTIL_LINUX_NG_USES_NCURSES
+ select UTIL_LINUX_USES_NCURSES
prompt "setterm"
help
setterm - set terminal attributes like terminal name, cursor
@@ -536,14 +536,14 @@ config UTIL_LINUX_NG_SETTERM
comment "text-utils"
-config UTIL_LINUX_NG_COLUMN
+config UTIL_LINUX_COLUMN
bool
- select UTIL_LINUX_NG_LIBSMARTCOLS
+ select UTIL_LINUX_LIBSMARTCOLS
prompt "column"
help
Columnate lists.
-config UTIL_LINUX_NG_LINE
+config UTIL_LINUX_LINE
bool
prompt "line"
help
diff --git a/rules/util-linux.make b/rules/util-linux.make
new file mode 100644
index 000000000..2f2103d7a
--- /dev/null
+++ b/rules/util-linux.make
@@ -0,0 +1,273 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2008 by Robert Schwebel
+# 2010 by Marc Kleine-Budde <mkl@penutronix.de>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_UTIL_LINUX) += util-linux
+
+#
+# Paths and names
+#
+UTIL_LINUX_VERSION := 2.38.1
+UTIL_LINUX_MD5 := cd11456f4ddd31f7fbfdd9488c0c0d02
+UTIL_LINUX := util-linux-$(UTIL_LINUX_VERSION)
+UTIL_LINUX_SUFFIX := tar.xz
+UTIL_LINUX_BASENAME := v$(if $(filter 2,$(basename $(UTIL_LINUX_VERSION))),$(UTIL_LINUX_VERSION),$(basename $(UTIL_LINUX_VERSION)))
+UTIL_LINUX_URL := $(call ptx/mirror, KERNEL, utils/util-linux/$(UTIL_LINUX_BASENAME)/$(UTIL_LINUX).$(UTIL_LINUX_SUFFIX))
+UTIL_LINUX_SOURCE := $(SRCDIR)/$(UTIL_LINUX).$(UTIL_LINUX_SUFFIX)
+UTIL_LINUX_DIR := $(BUILDDIR)/$(UTIL_LINUX)
+UTIL_LINUX_LICENSE := GPL-2.0-only AND GPL-2.0-or-later AND LGPL-2.0-or-later AND BSD-3-Clause AND BSD-4-Clause AND public_domain
+UTIL_LINUX_LICENSE_FILES := \
+ file://Documentation/licenses/COPYING.GPL-2.0-or-later;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+ file://Documentation/licenses/COPYING.BSD-3-Clause;md5=58dcd8452651fc8b07d1f65ce07ca8af \
+ file://Documentation/licenses/COPYING.BSD-4-Clause-UC;md5=263860f8968d8bafa5392cab74285262 \
+ file://Documentation/licenses/COPYING.LGPL-2.1-or-later;md5=4fbd65380cdd255951079008b364516c
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+UTIL_LINUX_CONF_ENV := \
+ $(CROSS_ENV) \
+ $(call ptx/ncurses, PTXCONF_UTIL_LINUX_USES_NCURSES) \
+ scanf_cv_type_modifier=as \
+ ac_cv_path_BLKID=no \
+ ac_cv_path_PERL=no \
+ ac_cv_path_VOLID=no
+
+#
+# autoconf
+#
+UTIL_LINUX_CONF_TOOL := autoconf
+UTIL_LINUX_CONF_OPT := \
+ $(CROSS_AUTOCONF_USR) \
+ --bindir=/usr/bin \
+ --sbindir=/usr/sbin \
+ --disable-werror \
+ --disable-asan \
+ --disable-ubsan \
+ --disable-fuzzing-engine \
+ --enable-shared \
+ --disable-static \
+ --enable-symvers \
+ --disable-gtk-doc \
+ $(GLOBAL_LARGE_FILE_OPTION) \
+ --enable-assert \
+ --disable-nls \
+ --disable-rpath \
+ --disable-static-programs \
+ --enable-all-programs=undefined \
+ --disable-asciidoc \
+ --disable-poman \
+ --enable-tls \
+ --disable-widechar \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_LIBUUID)-libuuid \
+ --disable-libuuid-force-uuidd \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_LIBBLKID)-libblkid \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_LIBMOUNT)-libmount \
+ --disable-libmount-support-mtab \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_LIBSMARTCOLS)-libsmartcols \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_LIBFDISK)-libfdisk \
+ $(call ptx/ifdef, PTXCONF_UTIL_LINUX_FDISKS,,--disable-fdisks) \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_MOUNT)-mount \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_LOSETUP)-losetup \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_ZRAMCTL)-zramctl \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_FSCK)-fsck \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_PARTX_TOOLS)-partx \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_UUIDD)-uuidd \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_UUIDGEN)-uuidgen \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_BLKID)-blkid \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_WIPEFS)-wipefs \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_MOUNTPOINT)-mountpoint \
+ --disable-fallocate \
+ --disable-unshare \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_NSENTER)-nsenter \
+ --disable-setpriv \
+ --disable-hardlink \
+ --disable-eject \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_AGETTY)-agetty \
+ --disable-plymouth_support \
+ --disable-cramfs \
+ --disable-bfs \
+ --disable-minix \
+ --disable-fdformat \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_HWCLOCK)-hwclock \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_MKFS)-mkfs \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_FSTRIM)-fstrim \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_SWAPON)-swapon \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_LSCPU)-lscpu \
+ --disable-lslogins \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_WDCTL)-wdctl \
+ --disable-cal \
+ --disable-logger \
+ --disable-whereis \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_SWITCH_ROOT)-switch_root \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_PIVOT_ROOT)-pivot_root \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_LSMEM)-lsmem \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_CHMEM)-chmem \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_IPCRM)-ipcrm \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_IPCS)-ipcs \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_IRQTOP)-irqtop \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_LSIRQ)-lsirq \
+ --disable-rfkill \
+ --disable-scriptutils \
+ --disable-tunelp \
+ --disable-kill \
+ --disable-last \
+ --disable-utmpdump \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_LINE)-line \
+ --disable-mesg \
+ --disable-raw \
+ --disable-rename \
+ --disable-vipw \
+ --disable-newgrp \
+ --disable-chfn-chsh-password \
+ --disable-chfn-chsh \
+ --disable-chsh-only-listed \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_LOGIN)-login \
+ --disable-login-chown-vcs \
+ --disable-login-stat-mail \
+ --disable-nologin \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_SULOGIN)-sulogin \
+ --disable-su \
+ --disable-runuser \
+ --disable-ul \
+ --disable-more \
+ --disable-pg \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_SETTERM)-setterm \
+ --$(call ptx/endis, PTXCONF_UTIL_LINUX_SCHEDUTILS)-schedutils \
+ --disable-wall \
+ --disable-write \
+ --disable-bash-completion \
+ --disable-pylibmount \
+ --disable-pg-bell \
+ --disable-use-tty-group \
+ --disable-sulogin-emergency-mount \
+ --disable-usrdir-path \
+ --disable-makeinstall-chown \
+ --disable-makeinstall-setuid \
+ --disable-colors-default \
+ --without-libiconv-prefix \
+ --without-libintl-prefix \
+ --with-util \
+ --without-selinux \
+ --without-audit \
+ --without-udev \
+ --without-ncursesw \
+ --$(call ptx/wwo, PTXCONF_UTIL_LINUX_USES_NCURSES)-ncurses \
+ --without-slang \
+ --without-tinfo \
+ --without-readline \
+ --without-utempter \
+ --without-cap-ng \
+ --without-libz \
+ --without-libmagic \
+ --without-user \
+ --without-btrfs \
+ --without-systemd \
+ --with-systemdsystemunitdir=/usr/lib/systemd/system \
+ --without-smack \
+ --without-econf \
+ --without-python \
+ --without-cryptsetup
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+UTIL_LINUX_LIB-y :=
+UTIL_LINUX_BIN-y :=
+
+# libraries
+UTIL_LINUX_LIB-$(PTXCONF_UTIL_LINUX_LIBBLKID) += blkid
+UTIL_LINUX_LIB-$(PTXCONF_UTIL_LINUX_LIBUUID) += uuid
+UTIL_LINUX_LIB-$(PTXCONF_UTIL_LINUX_LIBMOUNT) += mount
+UTIL_LINUX_LIB-$(PTXCONF_UTIL_LINUX_LIBSMARTCOLS) += smartcols
+UTIL_LINUX_LIB-$(PTXCONF_UTIL_LINUX_LIBFDISK) += fdisk
+
+# disk-utils
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_ADDPART) += sbin/addpart
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_CFDISK) += sbin/cfdisk
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_DELPART) += sbin/delpart
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_FDISK) += sbin/fdisk
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_FSCK) += sbin/fsck
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_MKFS) += sbin/mkfs
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_MKSWAP) += sbin/mkswap
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_PARTX) += sbin/partx
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_SFDISK) += sbin/sfdisk
+# login-utils
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_LOGIN) += bin/login
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_SULOGIN) += sbin/sulogin
+# misc-utils
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_BLKID) += sbin/blkid
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_FINDFS) += sbin/findfs
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_GETOPT) += bin/getopt
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_LSBLK) += bin/lsblk
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_MCOOKIE) += bin/mcookie
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_UUIDD) += sbin/uuidd
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_UUIDGEN) += bin/uuidgen
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_WIPEFS) += sbin/wipefs
+# schedutils
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_CHRT) += bin/chrt
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_IONICE) += bin/ionice
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_TASKSET) += bin/taskset
+# sys-utils
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_CHMEM) += bin/chmem
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_DMESG) += bin/dmesg
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_FLOCK) += bin/flock
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_FSFREEZE) += sbin/fsfreeze
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_FSTRIM) += sbin/fstrim
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_HWCLOCK) += sbin/hwclock
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_IPCRM) += bin/ipcrm
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_IPCS) += bin/ipcs
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_IRQTOP) += bin/irqtop
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_LDATTACH) += sbin/ldattach
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_LOSETUP) += sbin/losetup
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_LSCPU) += bin/lscpu
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_LSIRQ) += bin/lsirq
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_LSMEM) += bin/lsmem
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_MOUNT) += bin/mount
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_MOUNTPOINT) += bin/mountpoint
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_NSENTER) += bin/nsenter
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_PIVOT_ROOT) += sbin/pivot_root
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_READPROFILE) += sbin/readprofile
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_SWAPON) += sbin/swapoff sbin/swapon
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_SWITCH_ROOT) += sbin/switch_root
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_UMOUNT) += bin/umount
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_WDCTL) += bin/wdctl
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_ZRAMCTL) += sbin/zramctl
+# term-utils
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_AGETTY) += sbin/agetty
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_SETTERM) += bin/setterm
+# text-utils
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_COLUMN) += bin/column
+UTIL_LINUX_BIN-$(PTXCONF_UTIL_LINUX_LINE) += bin/line
+
+$(STATEDIR)/util-linux.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, util-linux)
+ @$(call install_fixup, util-linux,PRIORITY,optional)
+ @$(call install_fixup, util-linux,SECTION,base)
+ @$(call install_fixup, util-linux,AUTHOR,"Robert Schwebel <r.schwebel@pengutronix.de>")
+ @$(call install_fixup, util-linux,DESCRIPTION,missing)
+
+ @$(foreach lib, $(UTIL_LINUX_LIB-y), \
+ $(call install_lib, util-linux, 0, 0, 0644, lib$(lib));)
+
+ @$(foreach tool, $(UTIL_LINUX_BIN-y), \
+ $(call install_copy, util-linux, 0, 0, 0755, -, \
+ /usr/$(tool));)
+
+ @$(call install_finish, util-linux)
+
+ @$(call touch)
+
+# vim: syntax=make
diff --git a/rules/xorg-app-xinit.in b/rules/xorg-app-xinit.in
index d82c3f5a8..e054c3ab7 100644
--- a/rules/xorg-app-xinit.in
+++ b/rules/xorg-app-xinit.in
@@ -4,8 +4,8 @@ menuconfig XORG_APP_XINIT
tristate
select XORG_LIB_X11
select XORG_APP_XAUTH if XORG_APP_XINIT_STARTX && RUNTIME
- select UTIL_LINUX_NG if XORG_APP_XINIT_STARTX && RUNTIME
- select UTIL_LINUX_NG_MCOOKIE if XORG_APP_XINIT_STARTX
+ select UTIL_LINUX if XORG_APP_XINIT_STARTX && RUNTIME
+ select UTIL_LINUX_MCOOKIE if XORG_APP_XINIT_STARTX
prompt "xorg xinit"
help
This package provides 'xinit' and 'startx', utilities for starting
diff --git a/scripts/migrate/migrate_ptx b/scripts/migrate/migrate_ptx
index caee22fdd..7779c2937 100755
--- a/scripts/migrate/migrate_ptx
+++ b/scripts/migrate/migrate_ptx
@@ -453,3 +453,10 @@ s/^\(\(# \)\?PTXCONF_LIBTHEORA_\)_/\1/
# reason : upstream lighttpd module mod_compress was replaced by mod_deflate
#
s/^\(\(# \)\?PTXCONF_LIGHTTPD_MOD_\)COMPRESS\>/\1DEFLATE/
+
+# from : ptxdist-2022.09.0
+# to : ptxdist-2022.10.0
+# symbol : UTIL_LINUX_NG* -> UTIL_LINUX*
+# reason : upstream util-linux-ng fork was renamed back to util-linux over a decade ago
+#
+s/^\(\(# \)\?PTXCONF_UTIL_LINUX\)_NG/\1/
--
2.32.0
next reply other threads:[~2022-09-25 8:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-25 8:10 Ladislav Michl [this message]
2022-09-29 14:01 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YzAM3s9TH8Byi/75@lenoch \
--to=oss-lists@triops.cz \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox