mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Michael Olbrich <m.olbrich@pengutronix.de>
To: Michael Riesch <michael.riesch@wolfvision.net>
Cc: ptxdist@pengutronix.de, m.tretter@pengutronix.de
Subject: Re: [ptxdist] [PATCH v5 2/5] add package for rockchip firmware binaries
Date: Fri, 28 Jan 2022 13:31:00 +0100	[thread overview]
Message-ID: <YfPiBEkHgyPyseMZ@pengutronix.de> (raw)
In-Reply-To: <20220124120942.557161-3-michael.riesch@wolfvision.net>

On Mon, Jan 24, 2022 at 01:09:39PM +0100, Michael Riesch wrote:
> Rockchip provides the SDRAM initialization as well as BL31/BL32
> firmware for their SoCs in binary form. Add a package that downloads
> those binaries for further use in e.g., barebox.
> 
> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> [revised and extended Kconfig]
> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
> ---
>  platforms/firmware-rockchip.in | 41 +++++++++++++++++++
>  rules/firmware-rockchip.make   | 74 ++++++++++++++++++++++++++++++++++
>  2 files changed, 115 insertions(+)
>  create mode 100644 platforms/firmware-rockchip.in
>  create mode 100644 rules/firmware-rockchip.make
> 
> diff --git a/platforms/firmware-rockchip.in b/platforms/firmware-rockchip.in
> new file mode 100644
> index 000000000..aa702416d
> --- /dev/null
> +++ b/platforms/firmware-rockchip.in
> @@ -0,0 +1,41 @@
> +## SECTION=non_free_firmware
> +
> +menuconfig FIRMWARE_ROCKCHIP
> +	bool
> +	prompt "Rockchip firmware binaries    "
> +	help
> +	  Rockchip prebuilt SDRAM initialization and TF-A binaries.
> +
> +if FIRMWARE_ROCKCHIP
> +
> +config FIRMWARE_ROCKCHIP_RK3566_SDRAM

I still don't like the sub-options here. But I'm still thinking about
whether this part should go into PTXdist itself, so no need to touch this
for now.

Michael

> +	bool
> +	prompt "RK3566 SDRAM init"
> +	help
> +	  Rockchip RK3566 SDRAM initialization binary.
> +	  Compatible with e.g., the Pine64 Quartz64 Model A board.
> +
> +config FIRMWARE_ROCKCHIP_RK3568_SDRAM
> +	bool
> +	prompt "RK3568 SDRAM init"
> +	help
> +	  Rockchip RK3568 SDRAM initialization binary.
> +	  Compatible with e.g., the Rockchip RK3568 EVB1 board.
> +
> +config FIRMWARE_ROCKCHIP_RK356x_BL31
> +	bool
> +	prompt "RK356x BL31 binary"
> +	help
> +	  Rockchip RK3566/RK3568 BL31 binary.
> +	  Compatible with e.g., the Pine64 Quartz64 Model A board
> +	  and the Rockchip RK3568 EVB1 board.
> +
> +config FIRMWARE_ROCKCHIP_RK356x_BL32
> +	bool
> +	prompt "RK356x BL32 binary"
> +	help
> +	  Rockchip RK3566/RK3568 BL32 binary.
> +	  Compatible with e.g., the Pine64 Quartz64 Model A board
> +	  and the Rockchip RK3568 EVB1 board.
> +
> +endif
> diff --git a/rules/firmware-rockchip.make b/rules/firmware-rockchip.make
> new file mode 100644
> index 000000000..dd50c865a
> --- /dev/null
> +++ b/rules/firmware-rockchip.make
> @@ -0,0 +1,74 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2021 by Michael Tretter <m.tretter@pengutronix.de>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_FIRMWARE_ROCKCHIP) += firmware-rockchip
> +
> +FIRMWARE_ROCKCHIP_VERSION	:= 2021-06-01-g7d631e0d
> +FIRMWARE_ROCKCHIP_MD5		:= 4ca62f76ca75019dc708c4cb7cc31b0a
> +FIRMWARE_ROCKCHIP		:= firmware-rockchip-$(FIRMWARE_ROCKCHIP_VERSION)
> +FIRMWARE_ROCKCHIP_SUFFIX	:= zip
> +FIRMWARE_ROCKCHIP_URL		:= https://github.com/rockchip-linux/rkbin/archive/$(FIRMWARE_ROCKCHIP_VERSION).$(FIRMWARE_ROCKCHIP_SUFFIX)
> +FIRMWARE_ROCKCHIP_SOURCE	:= $(SRCDIR)/$(FIRMWARE_ROCKCHIP).$(FIRMWARE_ROCKCHIP_SUFFIX)
> +FIRMWARE_ROCKCHIP_DIR		:= $(BUILDDIR)/$(FIRMWARE_ROCKCHIP)
> +FIRMWARE_ROCKCHIP_LICENSE	:= proprietary
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +FIRMWARE_ROCKCHIP_CONF_TOOL := NO
> +
> +# ----------------------------------------------------------------------------
> +# Compile
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/firmware-rockchip.compile:
> +	@$(call targetinfo)
> +	@$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/firmware-rockchip.install:
> +	@$(call targetinfo)
> +
> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK3566_SDRAM
> +	install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3566_ddr_1056MHz_v1.08.bin \
> +		$(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3566_ddr_1056MHz_v1.08.bin
> +endif
> +
> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK3568_SDRAM
> +	install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3568_ddr_1560MHz_v1.08.bin \
> +		$(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3568_ddr_1560MHz_v1.08.bin
> +endif
> +
> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK356x_BL31
> +	install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3568_bl31_v1.24.elf \
> +		$(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3568_bl31_v1.24.elf
> +endif
> +
> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK356x_BL32
> +	install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3568_bl32_v1.05.bin \
> +		$(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3568_bl32_v1.05.bin
> +endif
> +
> +	@$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/firmware-rockchip.targetinstall:
> +	@$(call targetinfo)
> +	@$(call touch)
> +
> +# vim: syntax=make
> -- 
> 2.30.2
> 
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de


  reply	other threads:[~2022-01-28 12:31 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-24 12:09 [ptxdist] [PATCH v5 0/5] Add support for Rockchip firmware blobs Michael Riesch
2022-01-24 12:09 ` [ptxdist] [PATCH v5 1/5] platforms: add section for non-free " Michael Riesch
2022-01-24 12:09 ` [ptxdist] [PATCH v5 2/5] add package for rockchip firmware binaries Michael Riesch
2022-01-28 12:31   ` Michael Olbrich [this message]
2022-01-28 12:46     ` Michael Riesch
2022-01-28 12:59       ` Michael Olbrich
2022-01-28 13:46         ` Michael Riesch
2022-01-24 12:09 ` [ptxdist] [PATCH v5 3/5] scripts: add helper to inject files into a source directory Michael Riesch
2022-01-28 12:27   ` Michael Olbrich
2022-01-24 12:09 ` [ptxdist] [PATCH v5 4/5] barebox: add integration of firmware blobs Michael Riesch
2022-01-28 12:28   ` Michael Olbrich
2022-01-24 12:09 ` [ptxdist] [RFC PATCH v5 5/5] barebox.rockchip: add binary firmware blobs for quartz64 and rk3568-evb1 Michael Riesch
2022-01-28 12:33   ` Michael Olbrich
2022-01-28 15:26     ` Michael Riesch
2022-01-28 16:10       ` Michael Olbrich
2022-01-28 16:48         ` Michael Riesch
2022-01-28 20:08           ` Michael Olbrich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YfPiBEkHgyPyseMZ@pengutronix.de \
    --to=m.olbrich@pengutronix.de \
    --cc=m.tretter@pengutronix.de \
    --cc=michael.riesch@wolfvision.net \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox