* [ptxdist] [PATCH v3] U-Boot: Add option to disable OOT builds
@ 2021-11-30 10:39 Christian Melki
2021-11-30 13:16 ` Alexander Dahl
2021-12-08 7:24 ` Michael Olbrich
0 siblings, 2 replies; 5+ messages in thread
From: Christian Melki @ 2021-11-30 10:39 UTC (permalink / raw)
To: ptxdist
This option sometimes breaks builds with various external dependencies.
Especially vendor trees that have sourcedir path references.
Signed-off-by: Christian Melki <christian.melki@t2data.com>
---
platforms/u-boot.in | 10 ++++++++++
rules/u-boot.make | 12 ++++++++++--
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/platforms/u-boot.in b/platforms/u-boot.in
index 410391fe8..0d8213f45 100644
--- a/platforms/u-boot.in
+++ b/platforms/u-boot.in
@@ -20,6 +20,16 @@ config U_BOOT_MD5
string
prompt "U-Boot source md5"
+config U_BOOT_BUILD_OOT
+ prompt "Out of tree build"
+ default y
+ bool
+ help
+ U-Boot is usually built out of tree.
+ But for some builds, f.ex. with firmware blobs, out of tree builds
+ can break because of vendors using source paths to files.
+ This is mostly a workaround for those type of builds.
+
choice
prompt "config system"
default U_BOOT_CONFIGSYSTEM_LEGACY
diff --git a/rules/u-boot.make b/rules/u-boot.make
index 38c32bf27..2c6a1ada4 100644
--- a/rules/u-boot.make
+++ b/rules/u-boot.make
@@ -23,9 +23,14 @@ U_BOOT_SUFFIX := tar.bz2
U_BOOT_URL := https://ftp.denx.de/pub/u-boot/$(U_BOOT).$(U_BOOT_SUFFIX)
U_BOOT_SOURCE := $(SRCDIR)/$(U_BOOT).$(U_BOOT_SUFFIX)
U_BOOT_DIR := $(BUILDDIR)/$(U_BOOT)
-U_BOOT_BUILD_DIR := $(U_BOOT_DIR)-build
U_BOOT_DEVPKG := NO
+ifdef PTXCONF_U_BOOT_BUILD_OOT
+U_BOOT_BUILD_DIR := $(U_BOOT_DIR)-build
U_BOOT_BUILD_OOT := KEEP
+else
+U_BOOT_BUILD_DIR := $(U_BOOT_DIR)
+U_BOOT_BUILD_OOT := NO
+endif
ifdef PTXCONF_U_BOOT_CONFIGSYSTEM_KCONFIG
U_BOOT_CONFIG := $(call ptx/in-platformconfigdir, \
@@ -54,10 +59,13 @@ U_BOOT_WRAPPER_BLACKLIST := \
U_BOOT_CONF_OPT := \
-C $(U_BOOT_DIR) \
- O=$(U_BOOT_BUILD_DIR) \
V=$(PTXDIST_VERBOSE) \
$(call remove_quotes,$(PTXCONF_U_BOOT_CUSTOM_MAKE_OPTS))
+ifdef PTXCONF_U_BOOT_BUILD_OOT
+U_BOOT_CONF_OPT += O=$(U_BOOT_BUILD_DIR)
+endif
+
U_BOOT_MAKE_ENV := \
CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE) \
HOSTCC=$(HOSTCC)
--
2.30.2
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ptxdist] [PATCH v3] U-Boot: Add option to disable OOT builds
2021-11-30 10:39 [ptxdist] [PATCH v3] U-Boot: Add option to disable OOT builds Christian Melki
@ 2021-11-30 13:16 ` Alexander Dahl
2021-12-08 7:24 ` Michael Olbrich
1 sibling, 0 replies; 5+ messages in thread
From: Alexander Dahl @ 2021-11-30 13:16 UTC (permalink / raw)
To: Christian Melki; +Cc: ptxdist
Hello Christian,
Am Tue, Nov 30, 2021 at 11:39:26AM +0100 schrieb Christian Melki:
> This option sometimes breaks builds with various external dependencies.
> Especially vendor trees that have sourcedir path references.
>
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> ---
> platforms/u-boot.in | 10 ++++++++++
> rules/u-boot.make | 12 ++++++++++--
> 2 files changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/platforms/u-boot.in b/platforms/u-boot.in
> index 410391fe8..0d8213f45 100644
> --- a/platforms/u-boot.in
> +++ b/platforms/u-boot.in
> @@ -20,6 +20,16 @@ config U_BOOT_MD5
> string
> prompt "U-Boot source md5"
>
> +config U_BOOT_BUILD_OOT
> + prompt "Out of tree build"
> + default y
> + bool
> + help
> + U-Boot is usually built out of tree.
> + But for some builds, f.ex. with firmware blobs, out of tree builds
> + can break because of vendors using source paths to files.
> + This is mostly a workaround for those type of builds.
> +
> choice
> prompt "config system"
> default U_BOOT_CONFIGSYSTEM_LEGACY
> diff --git a/rules/u-boot.make b/rules/u-boot.make
> index 38c32bf27..2c6a1ada4 100644
> --- a/rules/u-boot.make
> +++ b/rules/u-boot.make
> @@ -23,9 +23,14 @@ U_BOOT_SUFFIX := tar.bz2
> U_BOOT_URL := https://ftp.denx.de/pub/u-boot/$(U_BOOT).$(U_BOOT_SUFFIX)
> U_BOOT_SOURCE := $(SRCDIR)/$(U_BOOT).$(U_BOOT_SUFFIX)
> U_BOOT_DIR := $(BUILDDIR)/$(U_BOOT)
> -U_BOOT_BUILD_DIR := $(U_BOOT_DIR)-build
> U_BOOT_DEVPKG := NO
> +ifdef PTXCONF_U_BOOT_BUILD_OOT
> +U_BOOT_BUILD_DIR := $(U_BOOT_DIR)-build
> U_BOOT_BUILD_OOT := KEEP
> +else
> +U_BOOT_BUILD_DIR := $(U_BOOT_DIR)
> +U_BOOT_BUILD_OOT := NO
> +endif
>
> ifdef PTXCONF_U_BOOT_CONFIGSYSTEM_KCONFIG
> U_BOOT_CONFIG := $(call ptx/in-platformconfigdir, \
> @@ -54,10 +59,13 @@ U_BOOT_WRAPPER_BLACKLIST := \
>
> U_BOOT_CONF_OPT := \
> -C $(U_BOOT_DIR) \
> - O=$(U_BOOT_BUILD_DIR) \
> V=$(PTXDIST_VERBOSE) \
> $(call remove_quotes,$(PTXCONF_U_BOOT_CUSTOM_MAKE_OPTS))
>
> +ifdef PTXCONF_U_BOOT_BUILD_OOT
> +U_BOOT_CONF_OPT += O=$(U_BOOT_BUILD_DIR)
> +endif
> +
> U_BOOT_MAKE_ENV := \
> CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE) \
> HOSTCC=$(HOSTCC)
LGTM.
Tested-by: Alexander Dahl <ada@thorsis.com>
Greets
Alex
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ptxdist] [PATCH v3] U-Boot: Add option to disable OOT builds
2021-11-30 10:39 [ptxdist] [PATCH v3] U-Boot: Add option to disable OOT builds Christian Melki
2021-11-30 13:16 ` Alexander Dahl
@ 2021-12-08 7:24 ` Michael Olbrich
2021-12-08 7:32 ` Alexander Dahl
1 sibling, 1 reply; 5+ messages in thread
From: Michael Olbrich @ 2021-12-08 7:24 UTC (permalink / raw)
To: Christian Melki; +Cc: ptxdist
On Tue, Nov 30, 2021 at 11:39:26AM +0100, Christian Melki wrote:
> This option sometimes breaks builds with various external dependencies.
> Especially vendor trees that have sourcedir path references.
Hmmm, I don't really like this, but I do understand why it can be
necessary :-/.
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> ---
> platforms/u-boot.in | 10 ++++++++++
> rules/u-boot.make | 12 ++++++++++--
> 2 files changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/platforms/u-boot.in b/platforms/u-boot.in
> index 410391fe8..0d8213f45 100644
> --- a/platforms/u-boot.in
> +++ b/platforms/u-boot.in
> @@ -20,6 +20,16 @@ config U_BOOT_MD5
> string
> prompt "U-Boot source md5"
>
> +config U_BOOT_BUILD_OOT
> + prompt "Out of tree build"
> + default y
> + bool
> + help
> + U-Boot is usually built out of tree.
> + But for some builds, f.ex. with firmware blobs, out of tree builds
> + can break because of vendors using source paths to files.
> + This is mostly a workaround for those type of builds.
> +
> choice
> prompt "config system"
> default U_BOOT_CONFIGSYSTEM_LEGACY
> diff --git a/rules/u-boot.make b/rules/u-boot.make
> index 38c32bf27..2c6a1ada4 100644
> --- a/rules/u-boot.make
> +++ b/rules/u-boot.make
> @@ -23,9 +23,14 @@ U_BOOT_SUFFIX := tar.bz2
> U_BOOT_URL := https://ftp.denx.de/pub/u-boot/$(U_BOOT).$(U_BOOT_SUFFIX)
> U_BOOT_SOURCE := $(SRCDIR)/$(U_BOOT).$(U_BOOT_SUFFIX)
> U_BOOT_DIR := $(BUILDDIR)/$(U_BOOT)
> -U_BOOT_BUILD_DIR := $(U_BOOT_DIR)-build
> U_BOOT_DEVPKG := NO
> +ifdef PTXCONF_U_BOOT_BUILD_OOT
> +U_BOOT_BUILD_DIR := $(U_BOOT_DIR)-build
> U_BOOT_BUILD_OOT := KEEP
> +else
> +U_BOOT_BUILD_DIR := $(U_BOOT_DIR)
> +U_BOOT_BUILD_OOT := NO
I prefere:
U_BOOT_BUILD_DIR := $(U_BOOT_DIR)$(call ptx/ifdef, PTXCONF_U_BOOT_BUILD_OOT,-build)
U_BOOT_BUILD_OOT := $(call ptx/ifdef, PTXCONF_U_BOOT_BUILD_OOT,KEEP,NO)
to keep it more compact.
> +endif
>
> ifdef PTXCONF_U_BOOT_CONFIGSYSTEM_KCONFIG
> U_BOOT_CONFIG := $(call ptx/in-platformconfigdir, \
> @@ -54,10 +59,13 @@ U_BOOT_WRAPPER_BLACKLIST := \
>
> U_BOOT_CONF_OPT := \
> -C $(U_BOOT_DIR) \
> - O=$(U_BOOT_BUILD_DIR) \
Right. In theory it should still work if O= is used unconditionally.
Because U_BOOT_BUILD_DIR points to the source tree in the non-OOT case. But
who knowns what happens in broken vendor trees.
But wrap it with ptx/ifdef instead to keep it here.
Michael
> V=$(PTXDIST_VERBOSE) \
> $(call remove_quotes,$(PTXCONF_U_BOOT_CUSTOM_MAKE_OPTS))
>
> +ifdef PTXCONF_U_BOOT_BUILD_OOT
> +U_BOOT_CONF_OPT += O=$(U_BOOT_BUILD_DIR)
> +endif
> +
> U_BOOT_MAKE_ENV := \
> CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE) \
> HOSTCC=$(HOSTCC)
> --
> 2.30.2
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ptxdist] [PATCH v3] U-Boot: Add option to disable OOT builds
2021-12-08 7:24 ` Michael Olbrich
@ 2021-12-08 7:32 ` Alexander Dahl
2021-12-08 8:33 ` Michael Olbrich
0 siblings, 1 reply; 5+ messages in thread
From: Alexander Dahl @ 2021-12-08 7:32 UTC (permalink / raw)
To: Michael Olbrich; +Cc: Christian Melki, ptxdist
Hello Michael,
Am Wed, Dec 08, 2021 at 08:24:06AM +0100 schrieb Michael Olbrich:
> On Tue, Nov 30, 2021 at 11:39:26AM +0100, Christian Melki wrote:
> > This option sometimes breaks builds with various external dependencies.
> > Especially vendor trees that have sourcedir path references.
>
> Hmmm, I don't really like this, but I do understand why it can be
> necessary :-/.
>
> > Signed-off-by: Christian Melki <christian.melki@t2data.com>
> > ---
> > platforms/u-boot.in | 10 ++++++++++
> > rules/u-boot.make | 12 ++++++++++--
> > 2 files changed, 20 insertions(+), 2 deletions(-)
> >
> > diff --git a/platforms/u-boot.in b/platforms/u-boot.in
> > index 410391fe8..0d8213f45 100644
> > --- a/platforms/u-boot.in
> > +++ b/platforms/u-boot.in
> > @@ -20,6 +20,16 @@ config U_BOOT_MD5
> > string
> > prompt "U-Boot source md5"
> >
> > +config U_BOOT_BUILD_OOT
> > + prompt "Out of tree build"
> > + default y
> > + bool
> > + help
> > + U-Boot is usually built out of tree.
> > + But for some builds, f.ex. with firmware blobs, out of tree builds
> > + can break because of vendors using source paths to files.
> > + This is mostly a workaround for those type of builds.
> > +
> > choice
> > prompt "config system"
> > default U_BOOT_CONFIGSYSTEM_LEGACY
> > diff --git a/rules/u-boot.make b/rules/u-boot.make
> > index 38c32bf27..2c6a1ada4 100644
> > --- a/rules/u-boot.make
> > +++ b/rules/u-boot.make
> > @@ -23,9 +23,14 @@ U_BOOT_SUFFIX := tar.bz2
> > U_BOOT_URL := https://ftp.denx.de/pub/u-boot/$(U_BOOT).$(U_BOOT_SUFFIX)
> > U_BOOT_SOURCE := $(SRCDIR)/$(U_BOOT).$(U_BOOT_SUFFIX)
> > U_BOOT_DIR := $(BUILDDIR)/$(U_BOOT)
> > -U_BOOT_BUILD_DIR := $(U_BOOT_DIR)-build
> > U_BOOT_DEVPKG := NO
> > +ifdef PTXCONF_U_BOOT_BUILD_OOT
> > +U_BOOT_BUILD_DIR := $(U_BOOT_DIR)-build
> > U_BOOT_BUILD_OOT := KEEP
> > +else
> > +U_BOOT_BUILD_DIR := $(U_BOOT_DIR)
> > +U_BOOT_BUILD_OOT := NO
>
> I prefere:
>
> U_BOOT_BUILD_DIR := $(U_BOOT_DIR)$(call ptx/ifdef, PTXCONF_U_BOOT_BUILD_OOT,-build)
> U_BOOT_BUILD_OOT := $(call ptx/ifdef, PTXCONF_U_BOOT_BUILD_OOT,KEEP,NO)
>
> to keep it more compact.
>
> > +endif
> >
> > ifdef PTXCONF_U_BOOT_CONFIGSYSTEM_KCONFIG
> > U_BOOT_CONFIG := $(call ptx/in-platformconfigdir, \
> > @@ -54,10 +59,13 @@ U_BOOT_WRAPPER_BLACKLIST := \
> >
> > U_BOOT_CONF_OPT := \
> > -C $(U_BOOT_DIR) \
> > - O=$(U_BOOT_BUILD_DIR) \
>
> Right. In theory it should still work if O= is used unconditionally.
> Because U_BOOT_BUILD_DIR points to the source tree in the non-OOT case. But
> who knowns what happens in broken vendor trees.
>
> But wrap it with ptx/ifdef instead to keep it here.
This is done few lines later, slightly different …
>
> Michael
>
> > V=$(PTXDIST_VERBOSE) \
> > $(call remove_quotes,$(PTXCONF_U_BOOT_CUSTOM_MAKE_OPTS))
> >
> > +ifdef PTXCONF_U_BOOT_BUILD_OOT
> > +U_BOOT_CONF_OPT += O=$(U_BOOT_BUILD_DIR)
> > +endif
> > +
^^ Here.
Greets
Alex
> > U_BOOT_MAKE_ENV := \
> > CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE) \
> > HOSTCC=$(HOSTCC)
> > --
> > 2.30.2
> >
> >
> > _______________________________________________
> > ptxdist mailing list
> > ptxdist@pengutronix.de
> > To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
> >
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ptxdist] [PATCH v3] U-Boot: Add option to disable OOT builds
2021-12-08 7:32 ` Alexander Dahl
@ 2021-12-08 8:33 ` Michael Olbrich
0 siblings, 0 replies; 5+ messages in thread
From: Michael Olbrich @ 2021-12-08 8:33 UTC (permalink / raw)
To: Christian Melki, ptxdist
On Wed, Dec 08, 2021 at 08:32:15AM +0100, Alexander Dahl wrote:
> Hello Michael,
>
> Am Wed, Dec 08, 2021 at 08:24:06AM +0100 schrieb Michael Olbrich:
> > On Tue, Nov 30, 2021 at 11:39:26AM +0100, Christian Melki wrote:
> > > This option sometimes breaks builds with various external dependencies.
> > > Especially vendor trees that have sourcedir path references.
> >
> > Hmmm, I don't really like this, but I do understand why it can be
> > necessary :-/.
> >
> > > Signed-off-by: Christian Melki <christian.melki@t2data.com>
> > > ---
> > > platforms/u-boot.in | 10 ++++++++++
> > > rules/u-boot.make | 12 ++++++++++--
> > > 2 files changed, 20 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/platforms/u-boot.in b/platforms/u-boot.in
> > > index 410391fe8..0d8213f45 100644
> > > --- a/platforms/u-boot.in
> > > +++ b/platforms/u-boot.in
> > > @@ -20,6 +20,16 @@ config U_BOOT_MD5
> > > string
> > > prompt "U-Boot source md5"
> > >
> > > +config U_BOOT_BUILD_OOT
> > > + prompt "Out of tree build"
> > > + default y
> > > + bool
> > > + help
> > > + U-Boot is usually built out of tree.
> > > + But for some builds, f.ex. with firmware blobs, out of tree builds
> > > + can break because of vendors using source paths to files.
> > > + This is mostly a workaround for those type of builds.
> > > +
> > > choice
> > > prompt "config system"
> > > default U_BOOT_CONFIGSYSTEM_LEGACY
> > > diff --git a/rules/u-boot.make b/rules/u-boot.make
> > > index 38c32bf27..2c6a1ada4 100644
> > > --- a/rules/u-boot.make
> > > +++ b/rules/u-boot.make
> > > @@ -23,9 +23,14 @@ U_BOOT_SUFFIX := tar.bz2
> > > U_BOOT_URL := https://ftp.denx.de/pub/u-boot/$(U_BOOT).$(U_BOOT_SUFFIX)
> > > U_BOOT_SOURCE := $(SRCDIR)/$(U_BOOT).$(U_BOOT_SUFFIX)
> > > U_BOOT_DIR := $(BUILDDIR)/$(U_BOOT)
> > > -U_BOOT_BUILD_DIR := $(U_BOOT_DIR)-build
> > > U_BOOT_DEVPKG := NO
> > > +ifdef PTXCONF_U_BOOT_BUILD_OOT
> > > +U_BOOT_BUILD_DIR := $(U_BOOT_DIR)-build
> > > U_BOOT_BUILD_OOT := KEEP
> > > +else
> > > +U_BOOT_BUILD_DIR := $(U_BOOT_DIR)
> > > +U_BOOT_BUILD_OOT := NO
> >
> > I prefere:
> >
> > U_BOOT_BUILD_DIR := $(U_BOOT_DIR)$(call ptx/ifdef, PTXCONF_U_BOOT_BUILD_OOT,-build)
> > U_BOOT_BUILD_OOT := $(call ptx/ifdef, PTXCONF_U_BOOT_BUILD_OOT,KEEP,NO)
> >
> > to keep it more compact.
> >
> > > +endif
> > >
> > > ifdef PTXCONF_U_BOOT_CONFIGSYSTEM_KCONFIG
> > > U_BOOT_CONFIG := $(call ptx/in-platformconfigdir, \
> > > @@ -54,10 +59,13 @@ U_BOOT_WRAPPER_BLACKLIST := \
> > >
> > > U_BOOT_CONF_OPT := \
> > > -C $(U_BOOT_DIR) \
> > > - O=$(U_BOOT_BUILD_DIR) \
> >
> > Right. In theory it should still work if O= is used unconditionally.
> > Because U_BOOT_BUILD_DIR points to the source tree in the non-OOT case. But
> > who knowns what happens in broken vendor trees.
> >
> > But wrap it with ptx/ifdef instead to keep it here.
>
> This is done few lines later, slightly different …
I know. I meant, wrap it here instead of doing it below with the 'ifdef'.
Michael
> > > V=$(PTXDIST_VERBOSE) \
> > > $(call remove_quotes,$(PTXCONF_U_BOOT_CUSTOM_MAKE_OPTS))
> > >
> > > +ifdef PTXCONF_U_BOOT_BUILD_OOT
> > > +U_BOOT_CONF_OPT += O=$(U_BOOT_BUILD_DIR)
> > > +endif
> > > +
>
> ^^ Here.
>
> Greets
> Alex
>
> > > U_BOOT_MAKE_ENV := \
> > > CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE) \
> > > HOSTCC=$(HOSTCC)
> > > --
> > > 2.30.2
> > >
> > >
> > > _______________________________________________
> > > ptxdist mailing list
> > > ptxdist@pengutronix.de
> > > To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
> > >
> >
> > --
> > Pengutronix e.K. | |
> > Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
> >
> > _______________________________________________
> > ptxdist mailing list
> > ptxdist@pengutronix.de
> > To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-12-08 8:33 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-30 10:39 [ptxdist] [PATCH v3] U-Boot: Add option to disable OOT builds Christian Melki
2021-11-30 13:16 ` Alexander Dahl
2021-12-08 7:24 ` Michael Olbrich
2021-12-08 7:32 ` Alexander Dahl
2021-12-08 8:33 ` Michael Olbrich
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox