From: Clemens Gruber <clemens.gruber@pqgruber.com>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] redis: new package
Date: Fri, 3 Dec 2021 16:28:39 +0100 [thread overview]
Message-ID: <Yao3p2uUNtGQ6UMQ@workstation.tuxnet> (raw)
In-Reply-To: <20211203151706.glrmlwa4yadeucwm@pengutronix.de>
On Fri, Dec 03, 2021 at 04:17:06PM +0100, Roland Hieber wrote:
> On Thu, Dec 02, 2021 at 04:09:55PM +0100, Clemens Gruber wrote:
> > Adds a new package for redis, an open source (BSD licensed), in-memory
> > data structure store, used as a database, cache, and message broker.
> >
> > Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
> > ---
> > ...ort-systemd-and-set-a-data-directory.patch | 30 ++++++
> > patches/redis-6.2.6/series | 4 +
> > projectroot/etc/group | 1 +
> > projectroot/etc/passwd | 1 +
> > .../usr/lib/systemd/system/redis.service | 23 +++++
> > projectroot/usr/lib/tmpfiles.d/redis.conf | 1 +
> > rules/redis.in | 27 ++++++
> > rules/redis.make | 96 +++++++++++++++++++
> > 8 files changed, 183 insertions(+)
> > create mode 100644 patches/redis-6.2.6/0001-Support-systemd-and-set-a-data-directory.patch
> > create mode 100644 patches/redis-6.2.6/series
> > create mode 100644 projectroot/usr/lib/systemd/system/redis.service
> > create mode 100644 projectroot/usr/lib/tmpfiles.d/redis.conf
> > create mode 100644 rules/redis.in
> > create mode 100644 rules/redis.make
> >
> > diff --git a/patches/redis-6.2.6/0001-Support-systemd-and-set-a-data-directory.patch b/patches/redis-6.2.6/0001-Support-systemd-and-set-a-data-directory.patch
> > new file mode 100644
> > index 000000000..34d8fd283
> > --- /dev/null
> > +++ b/patches/redis-6.2.6/0001-Support-systemd-and-set-a-data-directory.patch
> > @@ -0,0 +1,30 @@
> > +From: Clemens Gruber <clemens.gruber@pqgruber.com>
> > +Date: Mon, 15 Nov 2021 16:21:31 +0100
> > +Subject: [PATCH] Support systemd and set a data directory
> > +
> > +---
> > + redis.conf | 4 ++--
> > + 1 file changed, 2 insertions(+), 2 deletions(-)
> > +
> > +diff --git a/redis.conf b/redis.conf
> > +index e8eff2774981..8f76ea1c84e4 100644
> > +--- a/redis.conf
> > ++++ b/redis.conf
> > +@@ -272,7 +272,7 @@ daemonize no
> > + # The default is "no". To run under upstart/systemd, you can simply uncomment
> > + # the line below:
> > + #
> > +-# supervised auto
> > ++supervised auto
> > +
> > + # If a pid file is specified, Redis writes it where specified at startup
> > + # and removes it at exit.
> > +@@ -451,7 +451,7 @@ rdb-del-sync-files no
> > + # The Append Only File will also be created inside this directory.
> > + #
> > + # Note that you must specify a directory here, not a file name.
> > +-dir ./
> > ++dir /var/lib/redis/
> > +
> > + ################################# REPLICATION #################################
> > +
> > diff --git a/patches/redis-6.2.6/series b/patches/redis-6.2.6/series
> > new file mode 100644
> > index 000000000..1a299f8b7
> > --- /dev/null
> > +++ b/patches/redis-6.2.6/series
> > @@ -0,0 +1,4 @@
> > +# generated by git-ptx-patches
> > +#tag:base --start-number 1
> > +0001-Support-systemd-and-set-a-data-directory.patch
> > +# a122637ab2789578ffe3ff7cc6f22faf - git-ptx-patches magic
> > diff --git a/projectroot/etc/group b/projectroot/etc/group
> > index 09df73ba0..69d650510 100644
> > --- a/projectroot/etc/group
> > +++ b/projectroot/etc/group
> > @@ -33,4 +33,5 @@ render:x:209:
> > pulse:x:210:
> > chrony:x:211:
> > rauc-hawkbit:x:212:
> > +redis:x:213:
> > nogroup:x:65534:
> > diff --git a/projectroot/etc/passwd b/projectroot/etc/passwd
> > index 529f49a77..b4669abb5 100644
> > --- a/projectroot/etc/passwd
> > +++ b/projectroot/etc/passwd
> > @@ -17,5 +17,6 @@ systemd-journal-upload:x:208:208:systemd-journal-upload:/dev/null:/bin/false
> > pulse:x:209:210:pulse:/dev/null:/bin/false
> > chrony:x:210:211:chrony:/dev/null:/bin/false
> > rauc-hawkbit:x:211:212:rauc-hawkbit:/dev/null:/bin/false
> > +redis:x:212:213:redis:/dev/null:/bin/false
> > rpcuser:x:65533:65534:RPC user:/dev/null:/bin/false
> > nobody:x:65534:65534:Unprivileged Nobody:/dev/null:/bin/false
> > diff --git a/projectroot/usr/lib/systemd/system/redis.service b/projectroot/usr/lib/systemd/system/redis.service
> > new file mode 100644
> > index 000000000..715e64d69
> > --- /dev/null
> > +++ b/projectroot/usr/lib/systemd/system/redis.service
> > @@ -0,0 +1,23 @@
> > +[Unit]
> > +Description=Advanced key-value store
> > +After=network.target
> > +
> > +[Service]
> > +Type=notify
> > +User=redis
> > +Group=redis
> > +ExecStart=/usr/bin/redis-server /etc/redis.conf
> > +TimeoutStartSec=60
> > +TimeoutStopSec=60
> > +CapabilityBoundingSet=
> > +PrivateTmp=true
> > +PrivateDevices=true
> > +ProtectSystem=full
> > +ProtectHome=true
> > +NoNewPrivileges=true
> > +RuntimeDirectory=redis
> > +RuntimeDirectoryMode=755
> > +LimitNOFILE=10032
>
> Magic number? Or is this really the maximum number of file descriptors
> that redis will ever need?
By default, Redis sets its maxclients variable to 10000. Number of
required FDs is apparently maxclients + 32. That's why some distros set
the FD limit to 10032. Debian sets it to 65535 but I think 10000 client
connections should be enough for embedded Linux usecases :)
I took the whole service file from ArchLinux btw.
>
> > +
> > +[Install]
> > +WantedBy=multi-user.target
> > diff --git a/projectroot/usr/lib/tmpfiles.d/redis.conf b/projectroot/usr/lib/tmpfiles.d/redis.conf
> > new file mode 100644
> > index 000000000..d9283eab5
> > --- /dev/null
> > +++ b/projectroot/usr/lib/tmpfiles.d/redis.conf
> > @@ -0,0 +1 @@
> > +d /var/lib/redis 0700 redis redis
> > diff --git a/rules/redis.in b/rules/redis.in
> > new file mode 100644
> > index 000000000..3cf67ea89
> > --- /dev/null
> > +++ b/rules/redis.in
> > @@ -0,0 +1,27 @@
> > +## SECTION=system_libraries
> > +menuconfig REDIS
> > + tristate
> > + prompt "redis "
> > + select GCCLIBS_GCC_S
> > + select LIBC_DL
> > + select LIBC_PTHREAD
> > + select LIBC_CRYPT
> > + select SYSTEMD if REDIS_SYSTEMD
> > + help
> > + Redis is an open source (BSD licensed), in-memory data
> > + structure store, used as a database, cache, and message
> > + broker.
> > +
> > +if REDIS
> > +
> > +config REDIS_SYSTEMD
> > + bool
> > + default INITMETHOD_SYSTEMD
> > +
> > +config REDIS_SYSTEMD_UNIT
> > + bool
> > + default y
> > + depends on SYSTEMD
> > + prompt "Unit file for systemd"
> > +
> > +endif
> > diff --git a/rules/redis.make b/rules/redis.make
> > new file mode 100644
> > index 000000000..bb3bb60ff
> > --- /dev/null
> > +++ b/rules/redis.make
> > @@ -0,0 +1,96 @@
> > +# -*-makefile-*-
> > +#
> > +# Copyright (C) 2021 by Clemens Gruber <clemens.gruber@pqgruber.com>
> > +#
> > +# For further information about the PTXdist project and license conditions
> > +# see the README file.
> > +#
> > +
> > +#
> > +# We provide this package
> > +#
> > +PACKAGES-$(PTXCONF_REDIS) += redis
> > +
> > +#
> > +# Paths and names
> > +#
> > +REDIS_VERSION := 6.2.6
> > +REDIS_MD5 := f69ca96b39ca93001add922d558f9842
> > +REDIS := redis-$(REDIS_VERSION)
> > +REDIS_SUFFIX := tar.gz
> > +REDIS_URL := https://download.redis.io/releases/$(REDIS).$(REDIS_SUFFIX)
> > +REDIS_SOURCE := $(SRCDIR)/$(REDIS).$(REDIS_SUFFIX)
> > +REDIS_DIR := $(BUILDDIR)/$(REDIS)
> > +REDIS_LICENSE := BSD-3-Clause
>
> Please add at least one license snippet to REDIS_LICENSE_FILES, see
> <https://www.ptxdist.org/doc/dev_licenses.html#adding-license-files-to-ptxdist-packages>
> (as far as I can see, LICENSE should be enough.)
OK.
I will wait a bit before sending a v2, in case someone else spots
something.
Thanks,
Clemens
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
next prev parent reply other threads:[~2021-12-03 15:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-02 15:09 Clemens Gruber
2021-12-03 15:17 ` Roland Hieber
2021-12-03 15:28 ` Clemens Gruber [this message]
2021-12-03 15:40 ` Alexander Dahl
2021-12-03 15:50 ` Clemens Gruber
[not found] <20140724104658.GR25193@pengutronix.de>
2014-07-24 12:26 ` [ptxdist] [PATCH] redis : " Stéphane Massoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Yao3p2uUNtGQ6UMQ@workstation.tuxnet \
--to=clemens.gruber@pqgruber.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox