[ptxdist] [PATCH] librtlsdr: New package. Version 0.8

[ptxdist] [PATCH] librtlsdr: New package. Version 0.8

[Christian Melki]

librtlsdr is a library for using RealTek DVB-T receivers as
SDR (Software Defined Radio). This library is used by various
tools to tune into bands and decode radio data.

Signed-off-by: Christian Melki <christian.melki@t2data.com>
---
 rules/librtlsdr.in   | 29 ++++++++++++++++++++
 rules/librtlsdr.make | 64 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 rules/librtlsdr.in
 create mode 100644 rules/librtlsdr.make

diff --git a/rules/librtlsdr.in b/rules/librtlsdr.in
new file mode 100644
index 000000000..6f53ee7bb
--- /dev/null
+++ b/rules/librtlsdr.in
@@ -0,0 +1,29 @@
+## SECTION=system_libraries
+
+menuconfig LIBRTLSDR
+	tristate
+	prompt "librtlsdr		      "
+	select HOST_CMAKE
+	select LIBUSB
+	help
+	  Realtek SDR (Software Defined Radio) library.
+
+if LIBRTLSDR
+
+comment "Install options   ---"
+
+config LIBRTLSDR_TOOLS
+	bool
+	default y
+	prompt "Install tools		  "
+	help
+	  Installs rtl-sdr tools.
+
+config LIBRTLSDR_UDEV
+	bool
+	default y
+	prompt "Install udev rules	  "
+	help
+	  Installs udev rules.
+
+endif
diff --git a/rules/librtlsdr.make b/rules/librtlsdr.make
new file mode 100644
index 000000000..da17dc05a
--- /dev/null
+++ b/rules/librtlsdr.make
@@ -0,0 +1,64 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2021 by Christian Melki <christian.melki@t2data.com>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_LIBRTLSDR) += librtlsdr
+
+#
+# Paths and names
+#
+LIBRTLSDR_VERSION	:= 0.8.0
+LIBRTLSDR_MD5		:= 64f31f30f79cd91e4cd70b0a8edcff4e
+LIBRTLSDR		:= librtlsdr-$(LIBRTLSDR_VERSION)
+LIBRTLSDR_SUFFIX	:= tar.gz
+LIBRTLSDR_URL		:= https://github.com/librtlsdr/librtlsdr/archive/refs/tags/v$(LIBRTLSDR_VERSION).$(LIBRTLSDR_SUFFIX)
+LIBRTLSDR_SOURCE	:= $(SRCDIR)/$(LIBRTLSDR).$(LIBRTLSDR_SUFFIX)
+LIBRTLSDR_DIR		:= $(BUILDDIR)/$(LIBRTLSDR)
+LIBRTLSDR_LICENSE	:= GPL-2.0-only
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+LIBRTLSDR_CONF_TOOL := cmake
+LIBRTLSDR_CONF_OPT := \
+	$(CROSS_CMAKE_USR) \
+	-DCMAKE_INSTALL_LIBDIR=/usr/$(CROSS_LIB_DIR) \
+	-DLIB_INSTALL_DIR=/usr/$(CROSS_LIB_DIR) \
+	-DENABLE_SHARED=ON \
+	-DINSTALL_UDEV_RULES=ON
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/librtlsdr.targetinstall:
+	@$(call targetinfo)
+	@$(call install_init, librtlsdr)
+	@$(call install_fixup, librtlsdr,PRIORITY,optional)
+	@$(call install_fixup, librtlsdr,SECTION,base)
+	@$(call install_fixup, librtlsdr,AUTHOR,"Christian Melki <christian.melki@t2data.com>")
+	@$(call install_fixup, librtlsdr,DESCRIPTION,missing)
+	@$(call install_lib, librtlsdr, 0, 0, 0644, librtlsdr)
+
+ifdef PTXCONF_LIBRTLSDR_TOOLS
+	@$(call install_glob, librtlsdr, 0, 0, -, /usr/bin, *rtl_*,)
+endif
+
+ifdef PTXCONF_LIBRTLSDR_UDEV
+	@$(call install_copy, librtlsdr, 0, 0, 0644, \
+		$(LIBRTLSDR_PKGDIR)/etc/udev/rules.d/rtl-sdr.rules, \
+		/usr/lib/udev/rules.d/81-rtl-sdr.rules)
+endif
+
+	@$(call install_finish, librtlsdr)
+	@$(call touch)
+
+# vim: syntax=make
-- 
2.30.2


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de

[ptxdist] [PATCH] dump1090fa: New package. Version 6.1

[Christian Melki]

dump1090 from FlightAware is an ADS-B (Automatic Dependent Surveillance-Broadcast).
ADS-B is used by aircrafts to signal their presence.
Using an RTL (very cheap) based SDR, you can easily build your own ADS-B decoder.

Signed-off-by: Christian Melki <christian.melki@t2data.com>
---
 .../dump1090fa-6.1/fix_cpufeatures_arch.patch | 61 ++++++++++++++
 patches/dump1090fa-6.1/series                 |  1 +
 rules/dump1090fa.in                           |  8 ++
 rules/dump1090fa.make                         | 80 +++++++++++++++++++
 4 files changed, 150 insertions(+)
 create mode 100644 patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
 create mode 100644 patches/dump1090fa-6.1/series
 create mode 100644 rules/dump1090fa.in
 create mode 100644 rules/dump1090fa.make

diff --git a/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch b/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
new file mode 100644
index 000000000..270a35846
--- /dev/null
+++ b/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
@@ -0,0 +1,61 @@
+From 059e48b82beb4fb920cca977b02db1ceb48facb9 Mon Sep 17 00:00:00 2001
+From: Oliver Jowett <oliver.jowett@flightaware.com>
+Date: Thu, 23 Sep 2021 13:23:17 +0800
+Subject: [PATCH] Allow env vars (not only command line overrides) to set
+ CPUFEATURES_{ARCH,UNAME}. Change CPUFEATURES_{ARCH,UNAME} defaults to use
+ {ARCH,UNAME} values.
+
+Fixes #158
+---
+ Makefile             | 8 ++++++--
+ Makefile.cpufeatures | 4 ++--
+ 2 files changed, 8 insertions(+), 4 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index a85d154c5..9d81ed157 100644
+--- a/Makefile
++++ b/Makefile
+@@ -39,7 +39,11 @@ else
+   LIMESDR ?= no
+ endif
+ 
+-UNAME := $(shell uname)
++HOST_UNAME := $(shell uname)
++HOST_ARCH := $(shell uname -m)
++
++UNAME ?= $(HOST_UNAME)
++ARCH ?= $(HOST_ARCH)
+ 
+ ifeq ($(UNAME), Linux)
+   CPPFLAGS += -D_DEFAULT_SOURCE
+@@ -150,7 +154,6 @@ endif
+ ## starch (runtime DSP code selection) mix, architecture-specific
+ ##
+ 
+-ARCH ?= $(shell uname -m)
+ ifneq ($(CPUFEATURES),yes)
+   # need to be able to detect CPU features at runtime to enable any non-standard compiler flags
+   STARCH_MIX := generic
+@@ -180,6 +183,7 @@ include dsp/generated/makefile.$(STARCH_MIX)
+ showconfig:
+ 	@echo "Building with:" >&2
+ 	@echo "  Version string:  $(DUMP1090_VERSION)" >&2
++	@echo "  Architecture:    $(ARCH)" >&2
+ 	@echo "  DSP mix:         $(STARCH_MIX)" >&2
+ 	@echo "  RTLSDR support:  $(RTLSDR)" >&2
+ 	@echo "  BladeRF support: $(BLADERF)" >&2
+diff --git a/Makefile.cpufeatures b/Makefile.cpufeatures
+index 8c3b8418d..6b4289978 100644
+--- a/Makefile.cpufeatures
++++ b/Makefile.cpufeatures
+@@ -2,8 +2,8 @@
+ 
+ # cmake integration is a little tricky, so let's do this by hand for now
+ 
+-CPUFEATURES_UNAME := $(shell uname)
+-CPUFEATURES_ARCH := $(shell uname -m)
++CPUFEATURES_UNAME ?= $(UNAME)
++CPUFEATURES_ARCH ?= $(ARCH)
+ 
+ CPUFEATURES_OBJS := cpu_features/src/filesystem.o cpu_features/src/stack_line_reader.o cpu_features/src/string_view.o
+ CPUFEATURES_CFLAGS := -std=c99 -O -g -DSTACK_LINE_READER_BUFFER_SIZE=1024 -DNDEBUG
diff --git a/patches/dump1090fa-6.1/series b/patches/dump1090fa-6.1/series
new file mode 100644
index 000000000..75a7aa6dc
--- /dev/null
+++ b/patches/dump1090fa-6.1/series
@@ -0,0 +1 @@
+fix_cpufeatures_arch.patch
diff --git a/rules/dump1090fa.in b/rules/dump1090fa.in
new file mode 100644
index 000000000..5738ba17e
--- /dev/null
+++ b/rules/dump1090fa.in
@@ -0,0 +1,8 @@
+## SECTION=networking
+
+menuconfig DUMP1090FA
+	tristate
+	prompt "dump1090fa		      "
+	select LIBRTLSDR
+	help
+	  FlightAware MODE-S/ADS-B decoder.
\ No newline at end of file
diff --git a/rules/dump1090fa.make b/rules/dump1090fa.make
new file mode 100644
index 000000000..53d44791b
--- /dev/null
+++ b/rules/dump1090fa.make
@@ -0,0 +1,80 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2021 by Christian Melki <christian.melki@t2data.com>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_DUMP1090FA) += dump1090fa
+
+#
+# Paths and names
+#
+DUMP1090FA_VERSION	:= 6.1
+DUMP1090FA_MD5		:= a7cb661bc23974f8bf7650ce26b6e0be
+DUMP1090FA		:= dump1090fa-$(DUMP1090FA_VERSION)
+DUMP1090FA_SUFFIX	:= tar.gz
+DUMP1090FA_URL		:= https://github.com/flightaware/dump1090/archive/refs/tags/v$(DUMP1090FA_VERSION).$(DUMP1090FA_SUFFIX)
+DUMP1090FA_SOURCE	:= $(SRCDIR)/$(DUMP1090FA).$(DUMP1090FA_SUFFIX)
+DUMP1090FA_DIR		:= $(BUILDDIR)/$(DUMP1090FA)
+DUMP1090FA_LICENSE	:= GPL-2.0-only
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+ifdef PTXCONF_ARCH_X86
+DUMP1090FA_ARCH		:= x86
+ifdef PTXCONF_ARCH_X86_64
+DUMP1090FA_ARCH		:= x86_64
+endif
+endif
+ifdef PTXCONF_ARCH_ARM
+DUMP1090FA_ARCH		:= arm
+endif
+ifdef PTXCONF_ARCH_ARM64
+DUMP1090FA_ARCH		:= aarch64
+endif
+
+DUMP1090FA_CONF_TOOL := NO
+DUMP1090FA_MAKE_ENV := \
+	$(CROSS_ENV) \
+	BLADERF=no \
+	LIMESDR=no \
+	HACKRF=no \
+	RTLSDR=yes \
+	ARCH=$(DUMP1090FA_ARCH) \
+	CPUFEATURES_ARCH=$(DUMP1090FA_ARCH) \
+	CPUFEATURES_UNAME="Linux"
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/dump1090fa.install:
+	@$(call targetinfo)
+	@install -vD -m 755 $(DUMP1090FA_DIR)/dump1090 $(DUMP1090FA_PKGDIR)/usr/bin/dump1090-fa
+	$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/dump1090fa.targetinstall:
+	@$(call targetinfo)
+	@$(call install_init, dump1090fa)
+	@$(call install_fixup, dump1090fa,PRIORITY,optional)
+	@$(call install_fixup, dump1090fa,SECTION,base)
+	@$(call install_fixup, dump1090fa,AUTHOR,"Christian Melki <christian.melki@t2data.com>")
+	@$(call install_fixup, dump1090fa,DESCRIPTION,missing)
+	@$(call install_copy, dump1090fa, 0, 0, 0755, -, /usr/bin/dump1090-fa)
+
+	@$(call install_finish, dump1090fa)
+
+	@$(call touch)
+
+# vim: syntax=make
-- 
2.30.2


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de

Re: [ptxdist] [PATCH] dump1090fa: New package. Version 6.1

[Michael Olbrich]

On Thu, Nov 11, 2021 at 10:52:49AM +0100, Christian Melki wrote:
> dump1090 from FlightAware is an ADS-B (Automatic Dependent Surveillance-Broadcast).
> ADS-B is used by aircrafts to signal their presence.
> Using an RTL (very cheap) based SDR, you can easily build your own ADS-B decoder.
> 
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> ---
>  .../dump1090fa-6.1/fix_cpufeatures_arch.patch | 61 ++++++++++++++
>  patches/dump1090fa-6.1/series                 |  1 +
>  rules/dump1090fa.in                           |  8 ++
>  rules/dump1090fa.make                         | 80 +++++++++++++++++++
>  4 files changed, 150 insertions(+)
>  create mode 100644 patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
>  create mode 100644 patches/dump1090fa-6.1/series
>  create mode 100644 rules/dump1090fa.in
>  create mode 100644 rules/dump1090fa.make
> 
> diff --git a/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch b/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
> new file mode 100644
> index 000000000..270a35846
> --- /dev/null
> +++ b/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
> @@ -0,0 +1,61 @@
> +From 059e48b82beb4fb920cca977b02db1ceb48facb9 Mon Sep 17 00:00:00 2001
> +From: Oliver Jowett <oliver.jowett@flightaware.com>
> +Date: Thu, 23 Sep 2021 13:23:17 +0800
> +Subject: [PATCH] Allow env vars (not only command line overrides) to set
> + CPUFEATURES_{ARCH,UNAME}. Change CPUFEATURES_{ARCH,UNAME} defaults to use
> + {ARCH,UNAME} values.
> +
> +Fixes #158
> +---
> + Makefile             | 8 ++++++--
> + Makefile.cpufeatures | 4 ++--
> + 2 files changed, 8 insertions(+), 4 deletions(-)
> +
> +diff --git a/Makefile b/Makefile
> +index a85d154c5..9d81ed157 100644
> +--- a/Makefile
> ++++ b/Makefile
> +@@ -39,7 +39,11 @@ else
> +   LIMESDR ?= no
> + endif
> + 
> +-UNAME := $(shell uname)
> ++HOST_UNAME := $(shell uname)
> ++HOST_ARCH := $(shell uname -m)
> ++
> ++UNAME ?= $(HOST_UNAME)
> ++ARCH ?= $(HOST_ARCH)
> + 
> + ifeq ($(UNAME), Linux)
> +   CPPFLAGS += -D_DEFAULT_SOURCE
> +@@ -150,7 +154,6 @@ endif
> + ## starch (runtime DSP code selection) mix, architecture-specific
> + ##
> + 
> +-ARCH ?= $(shell uname -m)
> + ifneq ($(CPUFEATURES),yes)
> +   # need to be able to detect CPU features at runtime to enable any non-standard compiler flags
> +   STARCH_MIX := generic
> +@@ -180,6 +183,7 @@ include dsp/generated/makefile.$(STARCH_MIX)
> + showconfig:
> + 	@echo "Building with:" >&2
> + 	@echo "  Version string:  $(DUMP1090_VERSION)" >&2
> ++	@echo "  Architecture:    $(ARCH)" >&2
> + 	@echo "  DSP mix:         $(STARCH_MIX)" >&2
> + 	@echo "  RTLSDR support:  $(RTLSDR)" >&2
> + 	@echo "  BladeRF support: $(BLADERF)" >&2
> +diff --git a/Makefile.cpufeatures b/Makefile.cpufeatures
> +index 8c3b8418d..6b4289978 100644
> +--- a/Makefile.cpufeatures
> ++++ b/Makefile.cpufeatures
> +@@ -2,8 +2,8 @@
> + 
> + # cmake integration is a little tricky, so let's do this by hand for now
> + 
> +-CPUFEATURES_UNAME := $(shell uname)
> +-CPUFEATURES_ARCH := $(shell uname -m)
> ++CPUFEATURES_UNAME ?= $(UNAME)
> ++CPUFEATURES_ARCH ?= $(ARCH)
> + 
> + CPUFEATURES_OBJS := cpu_features/src/filesystem.o cpu_features/src/stack_line_reader.o cpu_features/src/string_view.o
> + CPUFEATURES_CFLAGS := -std=c99 -O -g -DSTACK_LINE_READER_BUFFER_SIZE=1024 -DNDEBUG
> diff --git a/patches/dump1090fa-6.1/series b/patches/dump1090fa-6.1/series
> new file mode 100644
> index 000000000..75a7aa6dc
> --- /dev/null
> +++ b/patches/dump1090fa-6.1/series
> @@ -0,0 +1 @@
> +fix_cpufeatures_arch.patch
> diff --git a/rules/dump1090fa.in b/rules/dump1090fa.in
> new file mode 100644
> index 000000000..5738ba17e
> --- /dev/null
> +++ b/rules/dump1090fa.in
> @@ -0,0 +1,8 @@
> +## SECTION=networking
> +
> +menuconfig DUMP1090FA
> +	tristate
> +	prompt "dump1090fa		      "

no tabs, just spaces to align the prompt.

> +	select LIBRTLSDR
> +	help
> +	  FlightAware MODE-S/ADS-B decoder.
> \ No newline at end of file
> diff --git a/rules/dump1090fa.make b/rules/dump1090fa.make
> new file mode 100644
> index 000000000..53d44791b
> --- /dev/null
> +++ b/rules/dump1090fa.make
> @@ -0,0 +1,80 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2021 by Christian Melki <christian.melki@t2data.com>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_DUMP1090FA) += dump1090fa
> +
> +#
> +# Paths and names
> +#
> +DUMP1090FA_VERSION	:= 6.1
> +DUMP1090FA_MD5		:= a7cb661bc23974f8bf7650ce26b6e0be
> +DUMP1090FA		:= dump1090fa-$(DUMP1090FA_VERSION)
> +DUMP1090FA_SUFFIX	:= tar.gz
> +DUMP1090FA_URL		:= https://github.com/flightaware/dump1090/archive/refs/tags/v$(DUMP1090FA_VERSION).$(DUMP1090FA_SUFFIX)
> +DUMP1090FA_SOURCE	:= $(SRCDIR)/$(DUMP1090FA).$(DUMP1090FA_SUFFIX)
> +DUMP1090FA_DIR		:= $(BUILDDIR)/$(DUMP1090FA)
> +DUMP1090FA_LICENSE	:= GPL-2.0-only
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +ifdef PTXCONF_ARCH_X86
> +DUMP1090FA_ARCH		:= x86
> +ifdef PTXCONF_ARCH_X86_64
> +DUMP1090FA_ARCH		:= x86_64
> +endif
> +endif
> +ifdef PTXCONF_ARCH_ARM
> +DUMP1090FA_ARCH		:= arm
> +endif
> +ifdef PTXCONF_ARCH_ARM64
> +DUMP1090FA_ARCH		:= aarch64
> +endif

Use PTXCONF_ARCH_STRING to start with. Take a look at what nss.make does.
You can probably just copy it. That should simplify this a bit.

> +
> +DUMP1090FA_CONF_TOOL := NO
> +DUMP1090FA_MAKE_ENV := \
> +	$(CROSS_ENV) \
> +	BLADERF=no \
> +	LIMESDR=no \
> +	HACKRF=no \
> +	RTLSDR=yes \
> +	ARCH=$(DUMP1090FA_ARCH) \
> +	CPUFEATURES_ARCH=$(DUMP1090FA_ARCH) \
> +	CPUFEATURES_UNAME="Linux"
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/dump1090fa.install:
> +	@$(call targetinfo)
> +	@install -vD -m 755 $(DUMP1090FA_DIR)/dump1090 $(DUMP1090FA_PKGDIR)/usr/bin/dump1090-fa
> +	$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/dump1090fa.targetinstall:
> +	@$(call targetinfo)
> +	@$(call install_init, dump1090fa)
> +	@$(call install_fixup, dump1090fa,PRIORITY,optional)
> +	@$(call install_fixup, dump1090fa,SECTION,base)
> +	@$(call install_fixup, dump1090fa,AUTHOR,"Christian Melki <christian.melki@t2data.com>")
> +	@$(call install_fixup, dump1090fa,DESCRIPTION,missing)

One empty line here.

Michael

> +	@$(call install_copy, dump1090fa, 0, 0, 0755, -, /usr/bin/dump1090-fa)
> +
> +	@$(call install_finish, dump1090fa)
> +
> +	@$(call touch)
> +
> +# vim: syntax=make
> -- 
> 2.30.2
> 
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de

Re: [ptxdist] [PATCH] dump1090fa: New package. Version 6.1

[Roland Hieber]

On Thu, Nov 11, 2021 at 10:52:49AM +0100, Christian Melki wrote:
> dump1090 from FlightAware is an ADS-B (Automatic Dependent Surveillance-Broadcast).
> ADS-B is used by aircrafts to signal their presence.
> Using an RTL (very cheap) based SDR, you can easily build your own ADS-B decoder.
> 
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> ---
>  .../dump1090fa-6.1/fix_cpufeatures_arch.patch | 61 ++++++++++++++
>  patches/dump1090fa-6.1/series                 |  1 +
>  rules/dump1090fa.in                           |  8 ++
>  rules/dump1090fa.make                         | 80 +++++++++++++++++++
>  4 files changed, 150 insertions(+)
>  create mode 100644 patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
>  create mode 100644 patches/dump1090fa-6.1/series
>  create mode 100644 rules/dump1090fa.in
>  create mode 100644 rules/dump1090fa.make
> 
> diff --git a/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch b/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
> new file mode 100644
> index 000000000..270a35846
> --- /dev/null
> +++ b/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
> @@ -0,0 +1,61 @@
> +From 059e48b82beb4fb920cca977b02db1ceb48facb9 Mon Sep 17 00:00:00 2001
> +From: Oliver Jowett <oliver.jowett@flightaware.com>
> +Date: Thu, 23 Sep 2021 13:23:17 +0800
> +Subject: [PATCH] Allow env vars (not only command line overrides) to set
> + CPUFEATURES_{ARCH,UNAME}. Change CPUFEATURES_{ARCH,UNAME} defaults to use
> + {ARCH,UNAME} values.
> +
> +Fixes #158
> +---
> + Makefile             | 8 ++++++--
> + Makefile.cpufeatures | 4 ++--
> + 2 files changed, 8 insertions(+), 4 deletions(-)
> +
> +diff --git a/Makefile b/Makefile
> +index a85d154c5..9d81ed157 100644
> +--- a/Makefile
> ++++ b/Makefile
> +@@ -39,7 +39,11 @@ else
> +   LIMESDR ?= no
> + endif
> + 
> +-UNAME := $(shell uname)
> ++HOST_UNAME := $(shell uname)
> ++HOST_ARCH := $(shell uname -m)
> ++
> ++UNAME ?= $(HOST_UNAME)
> ++ARCH ?= $(HOST_ARCH)
> + 
> + ifeq ($(UNAME), Linux)
> +   CPPFLAGS += -D_DEFAULT_SOURCE
> +@@ -150,7 +154,6 @@ endif
> + ## starch (runtime DSP code selection) mix, architecture-specific
> + ##
> + 
> +-ARCH ?= $(shell uname -m)
> + ifneq ($(CPUFEATURES),yes)
> +   # need to be able to detect CPU features at runtime to enable any non-standard compiler flags
> +   STARCH_MIX := generic
> +@@ -180,6 +183,7 @@ include dsp/generated/makefile.$(STARCH_MIX)
> + showconfig:
> + 	@echo "Building with:" >&2
> + 	@echo "  Version string:  $(DUMP1090_VERSION)" >&2
> ++	@echo "  Architecture:    $(ARCH)" >&2
> + 	@echo "  DSP mix:         $(STARCH_MIX)" >&2
> + 	@echo "  RTLSDR support:  $(RTLSDR)" >&2
> + 	@echo "  BladeRF support: $(BLADERF)" >&2
> +diff --git a/Makefile.cpufeatures b/Makefile.cpufeatures
> +index 8c3b8418d..6b4289978 100644
> +--- a/Makefile.cpufeatures
> ++++ b/Makefile.cpufeatures
> +@@ -2,8 +2,8 @@
> + 
> + # cmake integration is a little tricky, so let's do this by hand for now
> + 
> +-CPUFEATURES_UNAME := $(shell uname)
> +-CPUFEATURES_ARCH := $(shell uname -m)
> ++CPUFEATURES_UNAME ?= $(UNAME)
> ++CPUFEATURES_ARCH ?= $(ARCH)
> + 
> + CPUFEATURES_OBJS := cpu_features/src/filesystem.o cpu_features/src/stack_line_reader.o cpu_features/src/string_view.o
> + CPUFEATURES_CFLAGS := -std=c99 -O -g -DSTACK_LINE_READER_BUFFER_SIZE=1024 -DNDEBUG
> diff --git a/patches/dump1090fa-6.1/series b/patches/dump1090fa-6.1/series
> new file mode 100644
> index 000000000..75a7aa6dc
> --- /dev/null
> +++ b/patches/dump1090fa-6.1/series
> @@ -0,0 +1 @@
> +fix_cpufeatures_arch.patch
> diff --git a/rules/dump1090fa.in b/rules/dump1090fa.in
> new file mode 100644
> index 000000000..5738ba17e
> --- /dev/null
> +++ b/rules/dump1090fa.in
> @@ -0,0 +1,8 @@
> +## SECTION=networking
> +
> +menuconfig DUMP1090FA
> +	tristate
> +	prompt "dump1090fa		      "
> +	select LIBRTLSDR
> +	help
> +	  FlightAware MODE-S/ADS-B decoder.
> \ No newline at end of file
> diff --git a/rules/dump1090fa.make b/rules/dump1090fa.make
> new file mode 100644
> index 000000000..53d44791b
> --- /dev/null
> +++ b/rules/dump1090fa.make
> @@ -0,0 +1,80 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2021 by Christian Melki <christian.melki@t2data.com>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_DUMP1090FA) += dump1090fa
> +
> +#
> +# Paths and names
> +#
> +DUMP1090FA_VERSION	:= 6.1
> +DUMP1090FA_MD5		:= a7cb661bc23974f8bf7650ce26b6e0be
> +DUMP1090FA		:= dump1090fa-$(DUMP1090FA_VERSION)
> +DUMP1090FA_SUFFIX	:= tar.gz
> +DUMP1090FA_URL		:= https://github.com/flightaware/dump1090/archive/refs/tags/v$(DUMP1090FA_VERSION).$(DUMP1090FA_SUFFIX)
> +DUMP1090FA_SOURCE	:= $(SRCDIR)/$(DUMP1090FA).$(DUMP1090FA_SUFFIX)
> +DUMP1090FA_DIR		:= $(BUILDDIR)/$(DUMP1090FA)
> +DUMP1090FA_LICENSE	:= GPL-2.0-only

Also please add a <PKG>_LICENSE_FILES with md5 sums for both packages
please.

 -  Roland

> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +ifdef PTXCONF_ARCH_X86
> +DUMP1090FA_ARCH		:= x86
> +ifdef PTXCONF_ARCH_X86_64
> +DUMP1090FA_ARCH		:= x86_64
> +endif
> +endif
> +ifdef PTXCONF_ARCH_ARM
> +DUMP1090FA_ARCH		:= arm
> +endif
> +ifdef PTXCONF_ARCH_ARM64
> +DUMP1090FA_ARCH		:= aarch64
> +endif
> +
> +DUMP1090FA_CONF_TOOL := NO
> +DUMP1090FA_MAKE_ENV := \
> +	$(CROSS_ENV) \
> +	BLADERF=no \
> +	LIMESDR=no \
> +	HACKRF=no \
> +	RTLSDR=yes \
> +	ARCH=$(DUMP1090FA_ARCH) \
> +	CPUFEATURES_ARCH=$(DUMP1090FA_ARCH) \
> +	CPUFEATURES_UNAME="Linux"
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/dump1090fa.install:
> +	@$(call targetinfo)
> +	@install -vD -m 755 $(DUMP1090FA_DIR)/dump1090 $(DUMP1090FA_PKGDIR)/usr/bin/dump1090-fa
> +	$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/dump1090fa.targetinstall:
> +	@$(call targetinfo)
> +	@$(call install_init, dump1090fa)
> +	@$(call install_fixup, dump1090fa,PRIORITY,optional)
> +	@$(call install_fixup, dump1090fa,SECTION,base)
> +	@$(call install_fixup, dump1090fa,AUTHOR,"Christian Melki <christian.melki@t2data.com>")
> +	@$(call install_fixup, dump1090fa,DESCRIPTION,missing)
> +	@$(call install_copy, dump1090fa, 0, 0, 0755, -, /usr/bin/dump1090-fa)
> +
> +	@$(call install_finish, dump1090fa)
> +
> +	@$(call touch)
> +
> +# vim: syntax=make
> -- 
> 2.30.2
> 
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
> 

-- 
Roland Hieber, Pengutronix e.K.          | r.hieber@pengutronix.de     |
Steuerwalder Str. 21                     | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686         | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de