From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: In-Reply-To: <20200414080249.8105-1-m.tretter@pengutronix.de> MIME-Version: 1.0 Message-Id: From: Michael Olbrich Date: Mon, 04 May 2020 13:20:45 +0200 Subject: Re: [ptxdist] [APPLIED] u-boot-tools: version bump 2019.01 -> 2020.04 List-Id: PTXdist Development Mailing List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Reply-To: ptxdist@pengutronix.de Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: ptxdist-bounces@pengutronix.de Sender: "ptxdist" To: ptxdist@pengutronix.de Cc: Michael Tretter Thanks, applied as 647d9dcf1f8656f72601be6906200bc3e25ead8d. Michael [sent from post-receive hook] On Mon, 04 May 2020 13:20:45 +0200, Michael Tretter wrote: > The new U-Boot version has a tools-only_defconfig for building the > tools. Switch from the sandbox_defconfig to the tools-only defconfig. > > The U-Boot tools do not actually build the sandbox U-Boot and therefore > SDL support (for display/keyboard) is definitely not needed. Disable SDL > to prevent the "sdl2-config: Command not found" messages when building > the tools. > > Use the documented envtools top-level command to build the target tools > instead of calling the Makefile in the tools/env directory. > > Signed-off-by: Michael Tretter > Message-Id: <20200414080249.8105-1-m.tretter@pengutronix.de> > Signed-off-by: Michael Olbrich > > diff --git a/rules/host-u-boot-tools.make b/rules/host-u-boot-tools.make > index c16f4b03fac2..3a980dd76667 100644 > --- a/rules/host-u-boot-tools.make > +++ b/rules/host-u-boot-tools.make > @@ -17,7 +17,7 @@ HOST_PACKAGES-$(PTXCONF_HOST_U_BOOT_TOOLS) += host-u-boot-tools > # ---------------------------------------------------------------------------- > > HOST_U_BOOT_TOOLS_CONF_TOOL := NO > -HOST_U_BOOT_TOOLS_MAKE_OPT := sandbox_config tools-only > +HOST_U_BOOT_TOOLS_MAKE_OPT := tools-only_defconfig tools-only NO_SDL=1 > > # ---------------------------------------------------------------------------- > # Install > diff --git a/rules/u-boot-tools.make b/rules/u-boot-tools.make > index 154040ff5510..21b17c527052 100644 > --- a/rules/u-boot-tools.make > +++ b/rules/u-boot-tools.make > @@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_U_BOOT_TOOLS) += u-boot-tools > # > # Paths and names > # > -U_BOOT_TOOLS_VERSION := 2019.01 > -U_BOOT_TOOLS_MD5 := 0adbc6c755768f0b78a2a0decf0b253a > +U_BOOT_TOOLS_VERSION := 2020.04 > +U_BOOT_TOOLS_MD5 := 51113d2288c55110e33a895c65ab9f60 > U_BOOT_TOOLS := u-boot-$(U_BOOT_TOOLS_VERSION) > U_BOOT_TOOLS_SUFFIX := tar.bz2 > U_BOOT_TOOLS_URL := https://ftp.denx.de/pub/u-boot/$(U_BOOT_TOOLS).$(U_BOOT_TOOLS_SUFFIX) > @@ -31,19 +31,12 @@ U_BOOT_TOOLS_LICENSE_FILES := \ > # Prepare > # ---------------------------------------------------------------------------- > > - > -# just pick sandbox as a dummy target config > -U_BOOT_TOOLS_CONFIG := sandbox_config > -ifdef PTXCONF_ARCH_PPC > -# the sandbox is not supported by PPC so just some random PPC config > -U_BOOT_TOOLS_CONFIG := MPC8308RDB_defconfig > -endif > - > U_BOOT_TOOLS_CONF_TOOL := NO > U_BOOT_TOOLS_MAKE_OPT := \ > CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE) \ > - $(U_BOOT_TOOLS_CONFIG) \ > - tools/env/ > + tools-only_defconfig \ > + envtools \ > + NO_SDL=1 > > # ---------------------------------------------------------------------------- > # Install _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de