From: Michael Olbrich <mol@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: Denis Osterland-Heim <denis.osterland@diehl.com>
Subject: Re: [ptxdist] [v2] fixup! imx-uuc: new package
Date: Thu, 02 Apr 2020 17:03:31 +0200 [thread overview]
Message-ID: <E1jK1NT-0001Xa-2P@dude02.lab.pengutronix.de> (raw)
In-Reply-To: <20200326170225.9586-2-Denis.Osterland@diehl.com>
Thanks, applied as 8dc2c7d514233515383a5cadb990edb2be9972d1.
Michael
[sent from post-receive hook]
On Thu, 02 Apr 2020 17:03:30 +0200, Denis Osterland-Heim <denis.osterland@diehl.com> wrote:
> NXP user space util used by mfgtool.
>
> Signed-off-by: Denis Osterland-Heim <Denis.Osterland@diehl.com>
> ---
> ...001-sh-does-not-support-array-syntax.patch | 117 ++++++++++++++++++
> .../series | 4 +
> rules/imx-uuc.in | 7 ++
> rules/imx-uuc.make | 60 +++++++++
> 4 files changed, 188 insertions(+)
> create mode 100644 patches/imx-uuc-2019-11-07-gd6afb27e55d73d7ad08cd2dd51c784d8ec9694dc/0001-sh-does-not-support-array-syntax.patch
> create mode 100644 patches/imx-uuc-2019-11-07-gd6afb27e55d73d7ad08cd2dd51c784d8ec9694dc/series
> create mode 100644 rules/imx-uuc.in
> create mode 100644 rules/imx-uuc.make
>
> diff --git a/patches/imx-uuc-2019-11-07-gd6afb27e55d73d7ad08cd2dd51c784d8ec9694dc/0001-sh-does-not-support-array-syntax.patch b/patches/imx-uuc-2019-11-07-gd6afb27e55d73d7ad08cd2dd51c784d8ec9694dc/0001-sh-does-not-support-array-syntax.patch
> new file mode 100644
> index 000000000..995baea19
> --- /dev/null
> +++ b/patches/imx-uuc-2019-11-07-gd6afb27e55d73d7ad08cd2dd51c784d8ec9694dc/0001-sh-does-not-support-array-syntax.patch
> @@ -0,0 +1,117 @@
> +From: Denis Osterland-Heim <Denis.Osterland@diehl.com>
> +Date: Thu, 12 Mar 2020 17:36:22 +0100
> +Subject: [PATCH] sh does not support array syntax
> +
> +Remove NFS support, because it uses additional arrays and it is not
> +tested.
> +
> +Signed-off-by: Denis Osterland-Heim <Denis.Osterland@diehl.com>
> +---
> + linuxrc | 72 ++++++-----------------------------------------------------------
> + 1 file changed, 6 insertions(+), 66 deletions(-)
> +
> +diff --git a/linuxrc b/linuxrc
> +index 54bb8a2cbbd8..1f15e3cbdff3 100755
> +--- a/linuxrc
> ++++ b/linuxrc
> +@@ -16,20 +16,8 @@ last=0;
> +
> + UDC_DIR=/sys/class/udc
> +
> +-function launch_dhcpd() {
> +-
> +- touch -f /var/lib/misc/udhcpd.leases
> +- echo start 168.1.1.50 > /conf
> +- echo end 168.1.1.253 >> /conf
> +- echo interface usb$1 >>/conf
> +-
> +- ifconfig usb$1 168.1.1.1
> +- udhcpd /conf
> +-
> +-}
> +-
> + function contains() {
> +- for i in "${files[@]}"
> ++ for i in $files
> + do
> + if [ "$i" == "$1" ]; then
> + return 1;
> +@@ -45,7 +33,8 @@ function launch_uuc() {
> + echo 0x066F > idVendor
> +
> + if [[ ${cmdline} == *nfsroot* ]]; then
> +- echo 0x9CFF > idProduct
> ++ echo "unsupported"
> ++ exit 1
> + else
> + echo 0x9BFF > idProduct
> + fi
> +@@ -69,57 +58,8 @@ function launch_uuc() {
> + echo 0x40 > os_desc/b_vendor_code
> +
> + if [[ ${cmdline} == *nfsroot* ]]; then
> +- mkdir functions/ncm.1
> +- ln -s functions/ncm.1 configs/c.1/
> +-# mkdir functions/acm.1
> +-# ln -s functions/acm.1 configs/c.1/
> +- echo $1 > UDC
> +-
> +- echo "Start config network"
> +-
> +- ifconfig usb$2 up
> +- while [ ! -e /find_one ]
> +- do
> +- if [[ `ifconfig usb$2` == *inet6* ]]; then
> +- break;
> +- fi
> +- sleep 1
> +- done
> +-
> +- if [ -e /find_one ]; then
> +- exit 0
> +- fi
> +-
> +- touch /find_one
> +-
> +- launch_dhcpd $2
> +-
> +- remote=""
> +- while [[ "$remote" == "" ]];
> +- do
> +- sleep 2
> +- echo retry get remote ipaddress
> +- ping6 -c2 -I usb$2 ff02::1
> +-
> +- remote=`ip -6 neighbor show dev usb$2`
> +- remote=(${remote})
> +- remote=${remote[0]}
> +- done
> +-
> +- nfs=${cmdline#*nfsroot=}
> +- nfs=($nfs)
> +- nfs=${nfs[0]}
> +-
> +- nfs=${nfs##*:}
> +-
> +- echo ${remote} ${nfs}
> +-
> +- mount -t nfs [${remote}%usb$2]:${nfsroot}/${nfs} /mnt/
> +-
> +- cd /
> +-
> +- touch /exit_scan
> +-
> ++ echo "unsuppored"
> ++ exit 1
> + else
> + mkdir functions/ffs.utp$2
> + mkdir /dev/usb-utp$2
> +@@ -161,7 +101,7 @@ if test "$(ls -A "$UDC_DIR")"; then
> + for entry in *
> + do
> + if contains $entry; then
> +- files[$last]=$entry;
> ++ files="$files $entry";
> + id=$last;
> + last=`expr $last + 1`;
> + echo "Found New UDC: $entry";
> diff --git a/patches/imx-uuc-2019-11-07-gd6afb27e55d73d7ad08cd2dd51c784d8ec9694dc/series b/patches/imx-uuc-2019-11-07-gd6afb27e55d73d7ad08cd2dd51c784d8ec9694dc/series
> new file mode 100644
> index 000000000..125c531a3
> --- /dev/null
> +++ b/patches/imx-uuc-2019-11-07-gd6afb27e55d73d7ad08cd2dd51c784d8ec9694dc/series
> @@ -0,0 +1,4 @@
> +# generated by git-ptx-patches
> +#tag:base --start-number 1
> +0001-sh-does-not-support-array-syntax.patch
> +# a982c4666a0474a014b361496182bd8c - git-ptx-patches magic
> diff --git a/rules/imx-uuc.in b/rules/imx-uuc.in
> new file mode 100644
> index 000000000..ec0cbcd3a
> --- /dev/null
> +++ b/rules/imx-uuc.in
> @@ -0,0 +1,7 @@
> +## SECTION=communication
> +
> +config IMX_UUC
> + tristate
> + prompt "imx-uuc"
> + help
> + A Daemon wait for Freescale/NXP mfgtools host's command.
> diff --git a/rules/imx-uuc.make b/rules/imx-uuc.make
> new file mode 100644
> index 000000000..c708f1be2
> --- /dev/null
> +++ b/rules/imx-uuc.make
> @@ -0,0 +1,60 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2016-2020 by Denis Osterland <Denis.Osterland@diehl.com>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +PACKAGES-$(PTXCONF_IMX_UUC) += imx-uuc
> +
> +#
> +# Paths and names
> +#
> +IMX_UUC_VERSION := 2019-11-07-gd6afb27e55d73d7ad08cd2dd51c784d8ec9694dc
> +IMX_UUC_MD5 := 1a807ab59464385309b92794b43b5caa
> +IMX_UUC := imx-uuc-$(IMX_UUC_VERSION)
> +IMX_UUC_SUFFIX := tar.gz
> +IMX_UUC_URL := https://github.com/NXPmicro/imx-uuc/archive/$(IMX_UUC).$(IMX_UUC_SUFFIX)
> +IMX_UUC_SOURCE := $(SRCDIR)/$(IMX_UUC).$(IMX_UUC_SUFFIX)
> +IMX_UUC_DIR := $(BUILDDIR)/$(IMX_UUC)
> +IMX_UUC_LICENSE := GPL-2.0-or-later
> +IMX_UUC_LICENSE_FILES := \
> + file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +IMX_UUC_CONF_TOOL := NO
> +
> +# ----------------------------------------------------------------------------
> +# Compile
> +# ----------------------------------------------------------------------------
> +
> +IMX_UUC_MAKE_ENV := $(CROSS_ENV)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/imx-uuc.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, imx-uuc)
> + @$(call install_fixup, imx-uuc,PRIORITY,optional)
> + @$(call install_fixup, imx-uuc,SECTION,base)
> + @$(call install_fixup, imx-uuc,AUTHOR,"Denis Osterland <Denis.Osterland@diehl.com>")
> + @$(call install_fixup, imx-uuc,DESCRIPTION,missing)
> +
> + @$(call install_copy, imx-uuc, 0, 0, 0755, -, /usr/bin/uuc)
> + @$(call install_copy, imx-uuc, 0, 0, 0755, -, /usr/bin/ufb)
> + @$(call install_copy, imx-uuc, 0, 0, 0755, -, /usr/bin/sdimage)
> + @$(call install_alternative, imx-uuc, 0, 0, 0755, /linuxrc)
> + @$(call install_alternative, imx-uuc, 0, 0, 0644, /fat)
> +
> + @$(call install_finish, imx-uuc)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
>
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2020-04-02 15:03 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-26 17:03 [ptxdist] [PATCH v2 0/3] Freescale/NXP i.MX mfgtools 3.0 Denis Osterland-Heim
2020-03-26 17:03 ` [ptxdist] [PATCH v2 1/3] imx-uuc: new package Denis Osterland-Heim
2020-03-27 12:06 ` Michael Olbrich
2020-03-27 13:07 ` Denis Osterland-Heim
2020-03-31 5:29 ` [ptxdist] [PATCH v2] fixup! " Denis Osterland-Heim
2020-04-01 15:08 ` Michael Olbrich
2020-04-02 6:28 ` Denis Osterland-Heim
2020-04-02 6:39 ` Michael Olbrich
2020-04-02 15:03 ` Michael Olbrich [this message]
2020-04-03 5:58 ` [ptxdist] [APPLIED] [v2,1/3] " Michael Olbrich
2020-03-26 17:03 ` [ptxdist] [PATCH v2 2/3] host-libzip: " Denis Osterland-Heim
2020-04-03 5:58 ` [ptxdist] [APPLIED] [v2,2/3] " Michael Olbrich
2020-03-26 17:03 ` [ptxdist] [PATCH v2 3/3] host-mfgtools: " Denis Osterland-Heim
2020-04-02 15:03 ` [ptxdist] [v2,3/3] " Michael Olbrich
2020-03-27 12:41 ` [ptxdist] [PATCH v2 0/3] Freescale/NXP i.MX mfgtools 3.0 Michael Olbrich
2020-03-27 13:01 ` Denis Osterland-Heim
2020-03-27 13:16 ` Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1jK1NT-0001Xa-2P@dude02.lab.pengutronix.de \
--to=mol@pengutronix.de \
--cc=denis.osterland@diehl.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox