* [ptxdist] Fwd: How to apply patch using ptxdist
[not found] <CAPv2-QUwntMi96-M6+fQJB97RVX1-BEbDqG32paVf7QnEY6m+g@mail.gmail.com>
@ 2015-10-22 2:48 ` Prabhakara Rao Kolusu (WMSC-HW)
2015-10-23 8:17 ` Juergen Borleis
0 siblings, 1 reply; 6+ messages in thread
From: Prabhakara Rao Kolusu (WMSC-HW) @ 2015-10-22 2:48 UTC (permalink / raw)
To: ptxdist
[-- Attachment #1.1: Type: text/plain, Size: 450 bytes --]
---------- Forwarded message ----------
From: Prabhakara Rao Kolusu (WMSC-HW) <prabhak@willowglen.asia>
Date: Thu, Oct 22, 2015 at 10:23 AM
Subject: How to apply patch using ptxdist
To: ptxdist@pengutronix.de
Hi ,
I would like to know how to apply a patch to a already extracted package.
I do not want to remove the source directory of package and re extract it.
Could you please help me if there is an easy method.
Thanks & Regards,
Prabhakar.
[-- Attachment #1.2: Type: text/html, Size: 816 bytes --]
[-- Attachment #2: Type: text/plain, Size: 48 bytes --]
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] Fwd: How to apply patch using ptxdist
2015-10-22 2:48 ` [ptxdist] Fwd: How to apply patch using ptxdist Prabhakara Rao Kolusu (WMSC-HW)
@ 2015-10-23 8:17 ` Juergen Borleis
2015-10-23 9:29 ` Prabhakara Rao Kolusu (WMSC-HW)
0 siblings, 1 reply; 6+ messages in thread
From: Juergen Borleis @ 2015-10-23 8:17 UTC (permalink / raw)
To: ptxdist; +Cc: Prabhakara Rao Kolusu (WMSC-HW)
Hi Prabhakar,
On Thursday 22 October 2015 04:48:48 Prabhakara Rao Kolusu (WMSC-HW) wrote:
> I would like to know how to apply a patch to a already extracted package.
> I do not want to remove the source directory of package and re extract it.
>
> Could you please help me if there is an easy method.
Do you mean you want to add your patch in a persistent manner or just add it
and test something?
You could refer the PTXdist manual[1], section 4.2.5 for example.
Regards,
Juergen
[1]
http://www.pengutronix.de/software/ptxdist/appnotes/OSELAS.BSP-Pengutronix-Generic-arm-Quickstart.pdf
--
Pengutronix e.K. | Juergen Borleis |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] Fwd: How to apply patch using ptxdist
2015-10-23 8:17 ` Juergen Borleis
@ 2015-10-23 9:29 ` Prabhakara Rao Kolusu (WMSC-HW)
[not found] ` <CC2A85E271C1FB479D9C17305347F69A06C4AA54@WOLFSERVER19.wolfvision-at.intra>
0 siblings, 1 reply; 6+ messages in thread
From: Prabhakara Rao Kolusu (WMSC-HW) @ 2015-10-23 9:29 UTC (permalink / raw)
To: Juergen Borleis; +Cc: ptxdist
[-- Attachment #1.1: Type: text/plain, Size: 1365 bytes --]
Hi Juergen,
Thank you for prompt response.
I want to apply the patch to the existing package without extracting it
from archive file.
So that I can avoid building package from start.
For example take kernel, if I change something and want to add this to
final build, it has to be compiled from start if it needs extract to apply
the patch.
I have referred section 4.2.5, but unfortunately I did not get what I am
looking for.
Please help me in this regard.
Thanks & Regards.
Prabhakar.
On Fri, Oct 23, 2015 at 4:17 PM, Juergen Borleis <jbe@pengutronix.de> wrote:
> Hi Prabhakar,
>
> On Thursday 22 October 2015 04:48:48 Prabhakara Rao Kolusu (WMSC-HW) wrote:
> > I would like to know how to apply a patch to a already extracted package.
> > I do not want to remove the source directory of package and re extract
> it.
> >
> > Could you please help me if there is an easy method.
>
> Do you mean you want to add your patch in a persistent manner or just add
> it
> and test something?
>
> You could refer the PTXdist manual[1], section 4.2.5 for example.
>
> Regards,
> Juergen
>
> [1]
>
> http://www.pengutronix.de/software/ptxdist/appnotes/OSELAS.BSP-Pengutronix-Generic-arm-Quickstart.pdf
>
> --
> Pengutronix e.K. | Juergen Borleis
> |
> Industrial Linux Solutions | http://www.pengutronix.de/
> |
>
[-- Attachment #1.2: Type: text/html, Size: 2282 bytes --]
[-- Attachment #2: Type: text/plain, Size: 48 bytes --]
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] Fwd: How to apply patch using ptxdist
[not found] ` <CC2A85E271C1FB479D9C17305347F69A06C4AA54@WOLFSERVER19.wolfvision-at.intra>
@ 2015-10-23 9:43 ` Matthias Fend
2015-10-27 2:31 ` Prabhakara Rao Kolusu (WMSC-HW)
0 siblings, 1 reply; 6+ messages in thread
From: Matthias Fend @ 2015-10-23 9:43 UTC (permalink / raw)
To: ptxdist
Hi Prabhakara,
> Von: ptxdist [mailto:ptxdist-bounces@pengutronix.de] Im Auftrag von
> Prabhakara Rao Kolusu (WMSC-HW)
> Gesendet: Freitag, 23. Oktober 2015 11:30
> An: Juergen Borleis
> Cc: ptxdist@pengutronix.de
> Betreff: Re: [ptxdist] Fwd: How to apply patch using ptxdist
>
> Hi Juergen,
>
> Thank you for prompt response.
>
> I want to apply the patch to the existing package without extracting it from
> archive file.
> So that I can avoid building package from start.
>
> For example take kernel, if I change something and want to add this to final
> build, it has to be compiled from start if it needs extract to apply the patch.
>
> I have referred section 4.2.5, but unfortunately I did not get what I am
> looking for.
Maybe this is what you are looking for:
1. Change some source files of the Kernel (in platform-x/build-target/linux-x.x.x/...)
2. ptxdist drop kernel.compile
3. ptxdist go
4. ptxdist images
Good luck,
~Matthias
>
> Please help me in this regard.
>
> Thanks & Regards.
> Prabhakar.
>
>
>
>
> On Fri, Oct 23, 2015 at 4:17 PM, Juergen Borleis <jbe@pengutronix.de>
> wrote:
> Hi Prabhakar,
>
> On Thursday 22 October 2015 04:48:48 Prabhakara Rao Kolusu (WMSC-HW)
> wrote:
> > I would like to know how to apply a patch to a already extracted package.
> > I do not want to remove the source directory of package and re extract it.
> >
> > Could you please help me if there is an easy method.
>
> Do you mean you want to add your patch in a persistent manner or just add it
> and test something?
>
> You could refer the PTXdist manual[1], section 4.2.5 for example.
>
> Regards,
> Juergen
>
> [1]
> http://www.pengutronix.de/software/ptxdist/appnotes/OSELAS.BSP-
> Pengutronix-Generic-arm-Quickstart.pdf
>
> --
> Pengutronix e.K. | Juergen Borleis | Industrial Linux
> Solutions | http://www.pengutronix.de/ |
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] Fwd: How to apply patch using ptxdist
2015-10-23 9:43 ` Matthias Fend
@ 2015-10-27 2:31 ` Prabhakara Rao Kolusu (WMSC-HW)
2015-10-27 8:21 ` Juergen Borleis
0 siblings, 1 reply; 6+ messages in thread
From: Prabhakara Rao Kolusu (WMSC-HW) @ 2015-10-27 2:31 UTC (permalink / raw)
To: ptxdist
[-- Attachment #1.1: Type: text/plain, Size: 2495 bytes --]
Hi Matthias,
Thank you for your info,
I do follow the same procedure normally when I want to modify source and
compile it,
but, my requirement is applying a patch to the existing source package
without extracting it again.
Hope my requirement is clear and meaningful.
Thanks,
Prabhakar.
Thanks,
Prabhakar
On Fri, Oct 23, 2015 at 5:43 PM, Matthias Fend <Matthias.Fend@wolfvision.net
> wrote:
> Hi Prabhakara,
>
> > Von: ptxdist [mailto:ptxdist-bounces@pengutronix.de] Im Auftrag von
> > Prabhakara Rao Kolusu (WMSC-HW)
> > Gesendet: Freitag, 23. Oktober 2015 11:30
> > An: Juergen Borleis
> > Cc: ptxdist@pengutronix.de
> > Betreff: Re: [ptxdist] Fwd: How to apply patch using ptxdist
> >
> > Hi Juergen,
> >
> > Thank you for prompt response.
> >
> > I want to apply the patch to the existing package without extracting it
> from
> > archive file.
> > So that I can avoid building package from start.
> >
> > For example take kernel, if I change something and want to add this to
> final
> > build, it has to be compiled from start if it needs extract to apply the
> patch.
> >
> > I have referred section 4.2.5, but unfortunately I did not get what I am
> > looking for.
>
> Maybe this is what you are looking for:
>
> 1. Change some source files of the Kernel (in
> platform-x/build-target/linux-x.x.x/...)
> 2. ptxdist drop kernel.compile
> 3. ptxdist go
> 4. ptxdist images
>
> Good luck,
> ~Matthias
>
> >
> > Please help me in this regard.
> >
> > Thanks & Regards.
> > Prabhakar.
> >
> >
> >
> >
> > On Fri, Oct 23, 2015 at 4:17 PM, Juergen Borleis <jbe@pengutronix.de>
> > wrote:
> > Hi Prabhakar,
> >
> > On Thursday 22 October 2015 04:48:48 Prabhakara Rao Kolusu (WMSC-HW)
> > wrote:
> > > I would like to know how to apply a patch to a already extracted
> package.
> > > I do not want to remove the source directory of package and re extract
> it.
> > >
> > > Could you please help me if there is an easy method.
> >
> > Do you mean you want to add your patch in a persistent manner or just
> add it
> > and test something?
> >
> > You could refer the PTXdist manual[1], section 4.2.5 for example.
> >
> > Regards,
> > Juergen
> >
> > [1]
> > http://www.pengutronix.de/software/ptxdist/appnotes/OSELAS.BSP-
> > Pengutronix-Generic-arm-Quickstart.pdf
> >
> > --
> > Pengutronix e.K. | Juergen Borleis
> | Industrial Linux
> > Solutions | http://www.pengutronix.de/ |
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>
[-- Attachment #1.2: Type: text/html, Size: 3873 bytes --]
[-- Attachment #2: Type: text/plain, Size: 48 bytes --]
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] Fwd: How to apply patch using ptxdist
2015-10-27 2:31 ` Prabhakara Rao Kolusu (WMSC-HW)
@ 2015-10-27 8:21 ` Juergen Borleis
0 siblings, 0 replies; 6+ messages in thread
From: Juergen Borleis @ 2015-10-27 8:21 UTC (permalink / raw)
To: ptxdist; +Cc: Prabhakara Rao Kolusu (WMSC-HW)
Hi Prabhakar,
On Tuesday 27 October 2015 03:31:10 Prabhakara Rao Kolusu (WMSC-HW) wrote:
> I do follow the same procedure normally when I want to modify source and
> compile it, but, my requirement is applying a patch to the existing source
> package without extracting it again.
>
> Hope my requirement is clear and meaningful.
No. Its not clear and not yet meaningful. What exactly is the problem you need
to solve?
What is the problem by adding a patch to the list of patches and instructing
PTXdist to extract the archive again and apply the new list of patches? That
is where PTXdist is made for: it keeps everything you made and need to make
your target work for the future.
Regards,
Juergen
--
Pengutronix e.K. | Juergen Borleis |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-10-27 8:21 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CAPv2-QUwntMi96-M6+fQJB97RVX1-BEbDqG32paVf7QnEY6m+g@mail.gmail.com>
2015-10-22 2:48 ` [ptxdist] Fwd: How to apply patch using ptxdist Prabhakara Rao Kolusu (WMSC-HW)
2015-10-23 8:17 ` Juergen Borleis
2015-10-23 9:29 ` Prabhakara Rao Kolusu (WMSC-HW)
[not found] ` <CC2A85E271C1FB479D9C17305347F69A06C4AA54@WOLFSERVER19.wolfvision-at.intra>
2015-10-23 9:43 ` Matthias Fend
2015-10-27 2:31 ` Prabhakara Rao Kolusu (WMSC-HW)
2015-10-27 8:21 ` Juergen Borleis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox