From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: MIME-Version: 1.0 In-Reply-To: <201301040913.35970.jbe@pengutronix.de> References: <201301031538.30637.jbe@pengutronix.de> <201301040913.35970.jbe@pengutronix.de> Date: Fri, 4 Jan 2013 10:19:38 +0200 Message-ID: From: Ruben Louw Subject: Re: [ptxdist] Ptxdist menu config -> GDBServer Reply-To: ptxdist@pengutronix.de List-Id: PTXdist Development Mailing List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: multipart/mixed; boundary="===============1126358374==" Sender: ptxdist-bounces@pengutronix.de Errors-To: ptxdist-bounces@pengutronix.de To: Juergen Beisert Cc: ptxdist@pengutronix.de --===============1126358374== Content-Type: multipart/alternative; boundary=f46d043bdfe6f6c0c104d272237a --f46d043bdfe6f6c0c104d272237a Content-Type: text/plain; charset=ISO-8859-1 Sorry bout that, gmail doesnt add the cc i hvw to do it myself. I also enabled the gdbserver, and rebuilding. Do you have any tips on how to debug with qt creator and setting up the compiler for the mini2440? You BSP will definitely help, havent had time to read the ptxdist guru doc, but i will, as soon as i get this going. Thanks Ruben On Fri, Jan 4, 2013 at 10:13 AM, Juergen Beisert wrote: > Hi Ruben, > > Ruben Louw wrote: > > Thanks for the solution, > > \o/ > > > appologies for the CC wil make sure I reply all. > > You still didn't :)) > > > It worked, thank you. > > Hope my BSP helps you with your tasks. > > Regards, > Juergen > > -- > Pengutronix e.K. | Juergen Beisert > | > Linux Solutions for Science and Industry | http://www.pengutronix.de/ | > --f46d043bdfe6f6c0c104d272237a Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Sorry bout that, gmail doesnt add the cc i hvw to do it myself. I also enab= led the gdbserver, and rebuilding. Do you have any tips on how to debug wit= h qt creator and setting up the compiler for the mini2440?

You BSP w= ill definitely help, havent had time to read the ptxdist guru doc, but i wi= ll, as soon as i get this going.

Thanks

Ruben=A0

On Fri, Jan 4= , 2013 at 10:13 AM, Juergen Beisert <jbe@pengutronix.de> wr= ote:
Hi Ruben,

Ruben Louw wrote:
> Thanks for the solution,

\o/

> appologies for the CC wil make sure I reply all.

You still didn't :))

> It worked, thank you.

Hope my BSP helps you with your tasks.

Regards,
Juergen

--
Pengutronix e.K. =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0| Juergen Beisert =A0 =A0 =A0 =A0 =A0 =A0 |
Linux Solutions for Science and Industry =A0 =A0 =A0| http://www.pengutronix.de/ =A0|

--f46d043bdfe6f6c0c104d272237a-- --===============1126358374== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline -- ptxdist mailing list ptxdist@pengutronix.de --===============1126358374==-- From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-vb0-f51.google.com ([209.85.212.51]) by metis.ext.pengutronix.de with esmtp (Exim 4.72) (envelope-from ) id 1TqjHX-0003Xx-5c for ptxdist@pengutronix.de; Thu, 03 Jan 2013 12:48:19 +0100 Received: by mail-vb0-f51.google.com with SMTP id fq11so15021697vbb.38 for ; Thu, 03 Jan 2013 03:48:12 -0800 (PST) MIME-Version: 1.0 Date: Thu, 3 Jan 2013 13:48:12 +0200 Message-ID: From: Ruben Louw Subject: [ptxdist] Ptxdist menu config -> GDBServer Reply-To: ptxdist@pengutronix.de List-Id: PTXdist Development Mailing List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: multipart/mixed; boundary="===============0192599975==" Sender: ptxdist-bounces@pengutronix.de Errors-To: ptxdist-bounces@pengutronix.de To: ptxdist@pengutronix.de --===============0192599975== Content-Type: multipart/alternative; boundary=f46d042f9d480d2f7b04d260f0c7 --f46d042f9d480d2f7b04d260f0c7 Content-Type: text/plain; charset=ISO-8859-1 Hi everyone Got a question. I followed the quickstart doc for the newest bsp 2012.12.0 and built everything, ptxdist, toolchain and the rootfilesystem. everything works great, boot via nfs etc... now i want to start developing some neat apps using qt creator. It seeems i missed something, I have no gdbserver on my mini2440. Playing around with ptxdist menuconfig, i saw there is a gdbserver option, i suppose this is where i enable it. the only thing thats bugging my is, do i have to re build everything now and reinstall ptxdist, or is there some short cut i can take? Thank you in advanced Regards Ruben Louw --f46d042f9d480d2f7b04d260f0c7 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hi everyone

Got a question. I followed the quickstart doc for the ne= west bsp 2012.12.0 and built everything, ptxdist, toolchain and the rootfil= esystem. everything works great, boot via nfs etc...

now i want to s= tart developing some neat apps using qt creator. It seeems i missed somethi= ng, I have no gdbserver on my mini2440. Playing around with ptxdist menucon= fig, i saw there is a gdbserver option, i suppose this is where i enable it= . the only thing thats bugging my is, do i have to re build everything now = and reinstall ptxdist, or is there some short cut i can take?

Thank you in advanced

Regards
Ruben Louw
--f46d042f9d480d2f7b04d260f0c7-- --===============0192599975== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline -- ptxdist mailing list ptxdist@pengutronix.de --===============0192599975==-- From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: From: Juergen Beisert Date: Thu, 3 Jan 2013 15:38:30 +0100 References: In-Reply-To: MIME-Version: 1.0 Content-Disposition: inline Message-Id: <201301031538.30637.jbe@pengutronix.de> Subject: Re: [ptxdist] Ptxdist menu config -> GDBServer Reply-To: ptxdist@pengutronix.de List-Id: PTXdist Development Mailing List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: ptxdist-bounces@pengutronix.de Errors-To: ptxdist-bounces@pengutronix.de To: Ruben Louw , ptxdist@pengutronix.de Hi Ruben, please keep the mailing list at least on CC. Ruben Louw wrote: > I executed ptxdist go but I received an error, I attatched the terminal log > file. I copied from more or less where i could see the first error occured. > Not sure what its complaining about, looks like somthing in gdb itself. Same here, when I enable the gdbserver. The default setting of gdb-7.2 is too old for Linux 3.7. Use a more recent one. With the OSELAS.Toolchain-2012.12 comes the gdb-7.5 at the host side. So, run 1) ptxdist clean gdbserver 2) ptxdist menuconfig and change: Debug Tools ---> gdb ---> (7.5) gdb version (24a6779a9fe0260667710de1b082ef61) gdb source md5sum 3) ptxdist go Should work now. Regards, Juergen -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | http://www.pengutronix.de/ | -- ptxdist mailing list ptxdist@pengutronix.de From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: From: Juergen Beisert Date: Fri, 4 Jan 2013 09:28:43 +0100 References: <201301040913.35970.jbe@pengutronix.de> In-Reply-To: MIME-Version: 1.0 Content-Disposition: inline Message-Id: <201301040928.43624.jbe@pengutronix.de> Subject: Re: [ptxdist] Ptxdist menu config -> GDBServer Reply-To: ptxdist@pengutronix.de List-Id: PTXdist Development Mailing List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: ptxdist-bounces@pengutronix.de Errors-To: ptxdist-bounces@pengutronix.de To: Ruben Louw Cc: ptxdist@pengutronix.de Ruben Louw wrote: > Sorry bout that, gmail doesnt add the cc i hvw to do it myself. I also > enabled the gdbserver, and rebuilding. Do you have any tips on how to debug > with qt creator and setting up the compiler for the mini2440? Hmm, I think you should develop your Qt4 application on your host first. You have access to all little helpers you need in this case. And when the application does its job perfectly, just cross compile it again with PTXdist for the Mini2440. But sorry, I'm a kernel hacker, not a Qt expert. Regads, Juergen -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | http://www.pengutronix.de/ | -- ptxdist mailing list ptxdist@pengutronix.de From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: From: Juergen Beisert Date: Thu, 3 Jan 2013 13:04:30 +0100 References: In-Reply-To: MIME-Version: 1.0 Content-Disposition: inline Message-Id: <201301031304.30859.jbe@pengutronix.de> Subject: Re: [ptxdist] Ptxdist menu config -> GDBServer Reply-To: ptxdist@pengutronix.de List-Id: PTXdist Development Mailing List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: ptxdist-bounces@pengutronix.de Errors-To: ptxdist-bounces@pengutronix.de To: ptxdist@pengutronix.de Cc: Ruben Louw Hi Ruben, Ruben Louw wrote: > Got a question. I followed the quickstart doc for the newest bsp 2012.12.0 > and built everything, ptxdist, toolchain and the rootfilesystem. everything > works great, boot via nfs etc... \o/ > now i want to start developing some neat apps using qt creator. It seeems i > missed something, I have no gdbserver on my mini2440. Playing around with > ptxdist menuconfig, i saw there is a gdbserver option, i suppose this is > where i enable it. the only thing thats bugging my is, do i have to re > build everything now and reinstall ptxdist, or is there some short cut i > can take? This option is project centric. Just enabled the GDB option in the menu of this project and run the "ptxdist go" in the BSP directory again. After that everything is in place. Now it depends on your usecase how to proceed. If you are using NFS root and you have exported the "platform-mini2440/root" directory you are done. If you are using your Mini2440's NAND you need the additional "ptxdist images" step and to store the updated jffs2-image into the NAND again to get gdbserver into your Mini2440. Regards, Juergen -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | http://www.pengutronix.de/ | -- ptxdist mailing list ptxdist@pengutronix.de From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from www.weihenstephan.org ([80.190.177.12]) by metis.ext.pengutronix.de with esmtp (Exim 4.72) (envelope-from ) id 1Tr2n6-0004EY-Qv for ptxdist@pengutronix.de; Fri, 04 Jan 2013 09:38:31 +0100 Received: from isonoe.hi.pengutronix.de (port-212-202-120-50.static.qsc.de [212.202.120.50]) by www.weihenstephan.org (Postfix) with ESMTPSA id 256DF481383 for ; Fri, 4 Jan 2013 09:36:08 +0100 (CET) Resent-To: ptxdist@pengutronix.de Resent-Message-ID: <201301040937.33323.lfxciii@gmail.com> MIME-Version: 1.0 In-Reply-To: <201301040928.43624.jbe@pengutronix.de> References: <201301040913.35970.jbe@pengutronix.de> <201301040928.43624.jbe@pengutronix.de> Date: Fri, 4 Jan 2013 10:36:44 +0200 Message-ID: From: Ruben Louw Subject: Re: [ptxdist] Ptxdist menu config -> GDBServer Reply-To: ptxdist@pengutronix.de List-Id: PTXdist Development Mailing List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: multipart/mixed; boundary="===============0938089785==" Sender: ptxdist-bounces@pengutronix.de Errors-To: ptxdist-bounces@pengutronix.de To: Juergen Beisert --===============0938089785== Content-Type: multipart/alternative; boundary=20cf30780ca421bf1804d272615b --20cf30780ca421bf1804d272615b Content-Type: text/plain; charset=ISO-8859-1 Thanks, I'll investigate. regards Ruben On Fri, Jan 4, 2013 at 10:28 AM, Juergen Beisert wrote: > Ruben Louw wrote: > > Sorry bout that, gmail doesnt add the cc i hvw to do it myself. I also > > enabled the gdbserver, and rebuilding. Do you have any tips on how to > debug > > with qt creator and setting up the compiler for the mini2440? > > Hmm, I think you should develop your Qt4 application on your host first. > You > have access to all little helpers you need in this case. > > And when the application does its job perfectly, just cross compile it > again > with PTXdist for the Mini2440. > > But sorry, I'm a kernel hacker, not a Qt expert. > > Regads, > Juergen > > -- > Pengutronix e.K. | Juergen Beisert > | > Linux Solutions for Science and Industry | http://www.pengutronix.de/ | > --20cf30780ca421bf1804d272615b Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Thanks, I'll investigate.

regards
Ruben

On Fri, Jan 4, 2013 at 10:28 AM, Juergen Beisert <jbe@pengut= ronix.de> wrote:
Ruben Louw wrote:
> Sorry bout that, gmail doesnt add the cc i hvw to do it myself. I also=
> enabled the gdbserver, and rebuilding. Do you have any tips on how to = debug
> with qt creator and setting up the compiler for the mini2440?

Hmm, I think you should develop your Qt4 application on your host fir= st. You
have access to all little helpers you need in this case.

And when the application does its job perfectly, just cross compile it agai= n
with PTXdist for the Mini2440.

But sorry, I'm a kernel hacker, not a Qt expert.

Regads,
Juergen

--
Pengutronix e.K. =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0| Juergen Beisert =A0 =A0 =A0 =A0 =A0 =A0 |
Linux Solutions for Science and Industry =A0 =A0 =A0| http://www.pengutronix.de/ =A0|

--20cf30780ca421bf1804d272615b-- --===============0938089785== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline -- ptxdist mailing list ptxdist@pengutronix.de --===============0938089785==-- From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from www.weihenstephan.org ([80.190.177.12]) by metis.ext.pengutronix.de with esmtp (Exim 4.72) (envelope-from ) id 1Tqlwz-0002SK-S2 for ptxdist@pengutronix.de; Thu, 03 Jan 2013 15:39:19 +0100 Received: from isonoe.hi.pengutronix.de (port-212-202-120-50.static.qsc.de [212.202.120.50]) by www.weihenstephan.org (Postfix) with ESMTPSA id 23B14481D80 for ; Thu, 3 Jan 2013 15:37:14 +0100 (CET) Resent-To: ptxdist@pengutronix.de Resent-Message-ID: <201301031538.48288.lfxciii@gmail.com> MIME-Version: 1.0 In-Reply-To: References: <201301031304.30859.jbe@pengutronix.de> Date: Thu, 3 Jan 2013 16:00:31 +0200 Message-ID: From: Ruben Louw Content-Type: multipart/mixed; boundary=20cf30780ca435cda004d262c9dc Subject: Re: [ptxdist] Ptxdist menu config -> GDBServer Reply-To: ptxdist@pengutronix.de List-Id: PTXdist Development Mailing List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: ptxdist-bounces@pengutronix.de Errors-To: ptxdist-bounces@pengutronix.de To: Juergen Beisert --20cf30780ca435cda004d262c9dc Content-Type: multipart/alternative; boundary=20cf30780ca435cd9804d262c9da --20cf30780ca435cd9804d262c9da Content-Type: text/plain; charset=ISO-8859-1 Hi Juergen I executed ptxdist go but I received an error, I attatched the terminal log file. I copied from more or less where i could see the first error occured. Not sure what its complaining about, looks like somthing in gdb itself. any advice is appreciated, thank you. Regrads Ruben Louw On Thu, Jan 3, 2013 at 2:18 PM, Ruben Louw wrote: > Hi Juergen > > you are the man! I will try it and report back. > > Thanks ALOT for your help. > > Ruben Louw > > > On Thu, Jan 3, 2013 at 2:04 PM, Juergen Beisert wrote: > >> Hi Ruben, >> >> Ruben Louw wrote: >> > Got a question. I followed the quickstart doc for the newest bsp >> 2012.12.0 >> > and built everything, ptxdist, toolchain and the rootfilesystem. >> everything >> > works great, boot via nfs etc... >> >> \o/ >> >> > now i want to start developing some neat apps using qt creator. It >> seeems i >> > missed something, I have no gdbserver on my mini2440. Playing around >> with >> > ptxdist menuconfig, i saw there is a gdbserver option, i suppose this is >> > where i enable it. the only thing thats bugging my is, do i have to re >> > build everything now and reinstall ptxdist, or is there some short cut i >> > can take? >> >> This option is project centric. Just enabled the GDB option in the menu of >> this project and run the "ptxdist go" in the BSP directory again. After >> that >> everything is in place. Now it depends on your usecase how to proceed. If >> you >> are using NFS root and you have exported the "platform-mini2440/root" >> directory you are done. If you are using your Mini2440's NAND you need the >> additional "ptxdist images" step and to store the updated jffs2-image into >> the NAND again to get gdbserver into your Mini2440. >> >> Regards, >> Juergen >> >> -- >> Pengutronix e.K. | Juergen Beisert >> | >> Linux Solutions for Science and Industry | >> http://www.pengutronix.de/ | >> > > --20cf30780ca435cd9804d262c9da Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hi Juergen

I executed ptxdist go but I received an error, I attatche= d the terminal log file. I copied from more or less where i could see the f= irst error occured. Not sure what its complaining about, looks like somthin= g in gdb itself.

any advice is appreciated, thank you.

Regrads
Ruben Louw
<= br>
On Thu, Jan 3, 2013 at 2:18 PM, Ruben Louw <= lfxciii@gmail.com> wrote:
Hi Juergen

you are the man! I will tr= y it and report back.

Thanks ALOT for your help.

Ruben Louw

On Thu, Jan 3, 2013 at 2:04 PM, Juergen Beisert= <jbe@pengutronix.de> wrote:
Hi Ruben,

Ruben Louw wrote:
> Got a question. I followed the quickstart doc for the newest bsp 2012.= 12.0
> and built everything, ptxdist, toolchain and the rootfilesystem. every= thing
> works great, boot via nfs etc...

\o/

> now i want to start developing some neat apps using qt creator. It see= ems i
> missed something, I have no gdbserver on my mini2440. Playing around w= ith
> ptxdist menuconfig, i saw there is a gdbserver option, i suppose this = is
> where i enable it. the only thing thats bugging my is, do i have to re=
> build everything now and reinstall ptxdist, or is there some short cut= i
> can take?

This option is project centric. Just enabled the GDB option in the me= nu of
this project and run the "ptxdist go" in the BSP directory again.= After that
everything is in place. Now it depends on your usecase how to proceed. If y= ou
are using NFS root and you have exported the "platform-mini2440/root&q= uot;
directory you are done. If you are using your Mini2440's NAND you need = the
additional "ptxdist images" step and to store the updated jffs2-i= mage into
the NAND again to get gdbserver into your Mini2440.

Regards,
Juergen

--
Pengutronix e.K. =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0| Juergen Beisert =A0 =A0 =A0 =A0 =A0 =A0 |
Linux Solutions for Science and Industry =A0 =A0 =A0| http://www.pengutronix.de/ =A0|


--20cf30780ca435cd9804d262c9da-- --20cf30780ca435cda004d262c9dc Content-Type: application/octet-stream; name=Terminal Log for GDB Content-Disposition: attachment; filename=Terminal Log for GDB Content-Transfer-Encoding: base64 X-Attachment-Id: f_hbhynde70 L2hvbWUvb3JiaXQvT1NFTEFTLkJTUC1QZW5ndXRyb25peC1NaW5pMjQ0MC0yMDEyLjEyLjAvcGxh dGZvcm0tbWluaTI0NDAvYnVpbGQtdGFyZ2V0L2dkYi03LjIvZ2RiL2xpbnV4LW5hdC5oOjYzOjE4 OiBlcnJvcjogZmllbGQgJ3NpZ2luZm8nIGhhcyBpbmNvbXBsZXRlIHR5cGVJbiBmaWxlIGluY2x1 ZGVkIGZyb20gL2hvbWUvb3JiaXQvT1NFTEFTLkJTUC1QZW5ndXRyb25peC1NaW5pMjQ0MC0yMDEy LjEyLjAvcGxhdGZvcm0tbWluaTI0NDAvYnVpbGQtdGFyZ2V0L2dkYi03LjIvZ2RiL2xpbnV4LW5h dC5jOjMyOjA6Ci9ob21lL29yYml0L09TRUxBUy5CU1AtUGVuZ3V0cm9uaXgtTWluaTI0NDAtMjAx Mi4xMi4wL3BsYXRmb3JtLW1pbmkyNDQwL2J1aWxkLXRhcmdldC9nZGItNy4yL2dkYi9saW51eC1u YXQuaDo2MzoxODogZXJyb3I6IGZpZWxkICdzaWdpbmZvJyBoYXMgaW5jb21wbGV0ZSB0eXBlCklu IGZpbGUgaW5jbHVkZWQgZnJvbSAvaG9tZS9vcmJpdC9PU0VMQVMuQlNQLVBlbmd1dHJvbml4LU1p bmkyNDQwLTIwMTIuMTIuMC9wbGF0Zm9ybS1taW5pMjQ0MC9idWlsZC10YXJnZXQvZ2RiLTcuMi9n ZGIvbGludXgtdGhyZWFkLWRiLmM6NDI6MDoKL2hvbWUvb3JiaXQvT1NFTEFTLkJTUC1QZW5ndXRy b25peC1NaW5pMjQ0MC0yMDEyLjEyLjAvcGxhdGZvcm0tbWluaTI0NDAvYnVpbGQtdGFyZ2V0L2dk Yi03LjIvZ2RiL2xpbnV4LW5hdC5oOjYzOjE4OiBlcnJvcjogZmllbGQgJ3NpZ2luZm8nIGhhcyBp bmNvbXBsZXRlIHR5cGUKCkluIGZpbGUgaW5jbHVkZWQgZnJvbSAvaG9tZS9vcmJpdC9PU0VMQVMu QlNQLVBlbmd1dHJvbml4LU1pbmkyNDQwLTIwMTIuMTIuMC9wbGF0Zm9ybS1taW5pMjQ0MC9idWls ZC10YXJnZXQvZ2RiLTcuMi9nZGIvbGludXgtZm9yay5jOjMxOjA6Ci9ob21lL29yYml0L09TRUxB Uy5CU1AtUGVuZ3V0cm9uaXgtTWluaTI0NDAtMjAxMi4xMi4wL3BsYXRmb3JtLW1pbmkyNDQwL2J1 aWxkLXRhcmdldC9nZGItNy4yL2dkYi9saW51eC1uYXQuaDo2MzoxODogZXJyb3I6IGZpZWxkICdz aWdpbmZvJyBoYXMgaW5jb21wbGV0ZSB0eXBlCm1ha2VbM106ICoqKiBbYXJtLWxpbnV4LW5hdC5v XSBFcnJvciAxCm1ha2VbM106ICoqKiBXYWl0aW5nIGZvciB1bmZpbmlzaGVkIGpvYnMuLi4uCm1h a2VbM106ICoqKiBbbGludXgtZm9yay5vXSBFcnJvciAxCm1ha2VbM106ICoqKiBbbGludXgtdGhy ZWFkLWRiLm9dIEVycm9yIDEKL2hvbWUvb3JiaXQvT1NFTEFTLkJTUC1QZW5ndXRyb25peC1NaW5p MjQ0MC0yMDEyLjEyLjAvcGxhdGZvcm0tbWluaTI0NDAvYnVpbGQtdGFyZ2V0L2dkYi03LjIvZ2Ri L2xpbnV4LW5hdC5jOiBJbiBmdW5jdGlvbiAnc2lnaW5mb19maXh1cCc6Ci9ob21lL29yYml0L09T RUxBUy5CU1AtUGVuZ3V0cm9uaXgtTWluaTI0NDAtMjAxMi4xMi4wL3BsYXRmb3JtLW1pbmkyNDQw L2J1aWxkLXRhcmdldC9nZGItNy4yL2dkYi9saW51eC1uYXQuYzozODY0OjQwOiBlcnJvcjogaW52 YWxpZCBhcHBsaWNhdGlvbiBvZiAnc2l6ZW9mJyB0byBpbmNvbXBsZXRlIHR5cGUgJ3N0cnVjdCBz aWdpbmZvJwovaG9tZS9vcmJpdC9PU0VMQVMuQlNQLVBlbmd1dHJvbml4LU1pbmkyNDQwLTIwMTIu MTIuMC9wbGF0Zm9ybS1taW5pMjQ0MC9idWlsZC10YXJnZXQvZ2RiLTcuMi9nZGIvbGludXgtbmF0 LmM6Mzg2Njo0MDogZXJyb3I6IGludmFsaWQgYXBwbGljYXRpb24gb2YgJ3NpemVvZicgdG8gaW5j b21wbGV0ZSB0eXBlICdzdHJ1Y3Qgc2lnaW5mbycKL2hvbWUvb3JiaXQvT1NFTEFTLkJTUC1QZW5n dXRyb25peC1NaW5pMjQ0MC0yMDEyLjEyLjAvcGxhdGZvcm0tbWluaTI0NDAvYnVpbGQtdGFyZ2V0 L2dkYi03LjIvZ2RiL2xpbnV4LW5hdC5jOiBJbiBmdW5jdGlvbiAnbGludXhfeGZlcl9zaWdpbmZv JzoKL2hvbWUvb3JiaXQvT1NFTEFTLkJTUC1QZW5ndXRyb25peC1NaW5pMjQ0MC0yMDEyLjEyLjAv cGxhdGZvcm0tbWluaTI0NDAvYnVpbGQtdGFyZ2V0L2dkYi03LjIvZ2RiL2xpbnV4LW5hdC5jOjM4 NzY6MTg6IGVycm9yOiBzdG9yYWdlIHNpemUgb2YgJ3NpZ2luZm8nIGlzbid0IGtub3duCi9ob21l L29yYml0L09TRUxBUy5CU1AtUGVuZ3V0cm9uaXgtTWluaTI0NDAtMjAxMi4xMi4wL3BsYXRmb3Jt LW1pbmkyNDQwL2J1aWxkLXRhcmdldC9nZGItNy4yL2dkYi9saW51eC1uYXQuYzozODc3OjMyOiBl cnJvcjogaW52YWxpZCBhcHBsaWNhdGlvbiBvZiAnc2l6ZW9mJyB0byBpbmNvbXBsZXRlIHR5cGUg J3N0cnVjdCBzaWdpbmZvJwovaG9tZS9vcmJpdC9PU0VMQVMuQlNQLVBlbmd1dHJvbml4LU1pbmky NDQwLTIwMTIuMTIuMC9wbGF0Zm9ybS1taW5pMjQ0MC9idWlsZC10YXJnZXQvZ2RiLTcuMi9nZGIv bGludXgtbmF0LmM6IEluIGZ1bmN0aW9uICdsaW51eF9uYXRfZ2V0X3NpZ2luZm8nOgovaG9tZS9v cmJpdC9PU0VMQVMuQlNQLVBlbmd1dHJvbml4LU1pbmkyNDQwLTIwMTIuMTIuMC9wbGF0Zm9ybS1t aW5pMjQ0MC9idWlsZC10YXJnZXQvZ2RiLTcuMi9nZGIvbGludXgtbmF0LmM6NTY2NzoxOiB3YXJu aW5nOiBjb250cm9sIHJlYWNoZXMgZW5kIG9mIG5vbi12b2lkIGZ1bmN0aW9uIFstV3JldHVybi10 eXBlXQptYWtlWzNdOiAqKiogW2xpbnV4LW5hdC5vXSBFcnJvciAxCm1ha2VbM106IExlYXZpbmcg ZGlyZWN0b3J5IGAvaG9tZS9vcmJpdC9PU0VMQVMuQlNQLVBlbmd1dHJvbml4LU1pbmkyNDQwLTIw MTIuMTIuMC9wbGF0Zm9ybS1taW5pMjQ0MC9idWlsZC10YXJnZXQvZ2RiLTcuMi1idWlsZC9nZGIn Cm1ha2VbMl06ICoqKiBbYWxsLWdkYl0gRXJyb3IgMgptYWtlWzJdOiBMZWF2aW5nIGRpcmVjdG9y eSBgL2hvbWUvb3JiaXQvT1NFTEFTLkJTUC1QZW5ndXRyb25peC1NaW5pMjQ0MC0yMDEyLjEyLjAv cGxhdGZvcm0tbWluaTI0NDAvYnVpbGQtdGFyZ2V0L2dkYi03LjItYnVpbGQnCm1ha2VbMV06ICoq KiBbYWxsXSBFcnJvciAyCm1ha2VbMV06IExlYXZpbmcgZGlyZWN0b3J5IGAvaG9tZS9vcmJpdC9P U0VMQVMuQlNQLVBlbmd1dHJvbml4LU1pbmkyNDQwLTIwMTIuMTIuMC9wbGF0Zm9ybS1taW5pMjQ0 MC9idWlsZC10YXJnZXQvZ2RiLTcuMi1idWlsZCcKbWFrZTogKioqIFsvaG9tZS9vcmJpdC9PU0VM QVMuQlNQLVBlbmd1dHJvbml4LU1pbmkyNDQwLTIwMTIuMTIuMC9wbGF0Zm9ybS1taW5pMjQ0MC9z dGF0ZS9nZGIuY29tcGlsZV0gRXJyb3IgMgoK --20cf30780ca435cda004d262c9dc Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline -- ptxdist mailing list ptxdist@pengutronix.de --20cf30780ca435cda004d262c9dc--