From: Jon Ringle <jon@ringle.org>
To: "ptxdist@pengutronix.de" <ptxdist@pengutronix.de>
Subject: Re: [ptxdist] [PATCH] autossh: new package
Date: Mon, 30 Jun 2014 14:15:16 -0400 [thread overview]
Message-ID: <CAMwGMjzkFYd6vKm-nyekz7Oeuywwg=ZdvVL1Xm=Dgd7VPN+NMQ@mail.gmail.com> (raw)
In-Reply-To: <20140630090004.GG12903@pengutronix.de>
On Mon, Jun 30, 2014 at 5:00 AM, Michael Olbrich
<m.olbrich@pengutronix.de> wrote:
> On Fri, Jun 27, 2014 at 05:15:40PM -0400, jon@ringle.org wrote:
>> From: Jon Ringle <jringle@gridpoint.com>
>>
>> autossh will automatically restart SSH sessions and tunnels
>>
>> http://www.harding.motd.ca/autossh/
>>
>> Signed-off-by: Jon Ringle <jringle@gridpoint.com>
>> ---
>> ...l-rule-friendly-towards-packaging-with-DE.patch | 47 +++++++++++++++++++
>> patches/autossh-1.4c/series | 4 ++
>> rules/autossh.in | 7 +++
>> rules/autossh.make | 53 ++++++++++++++++++++++
>> 4 files changed, 111 insertions(+)
>> create mode 100644 patches/autossh-1.4c/0001-Make-install-rule-friendly-towards-packaging-with-DE.patch
>> create mode 100644 patches/autossh-1.4c/series
>> create mode 100644 rules/autossh.in
>> create mode 100644 rules/autossh.make
>>
>> diff --git a/patches/autossh-1.4c/0001-Make-install-rule-friendly-towards-packaging-with-DE.patch b/patches/autossh-1.4c/0001-Make-install-rule-friendly-towards-packaging-with-DE.patch
>> new file mode 100644
>> index 0000000..96fca56
>> --- /dev/null
>> +++ b/patches/autossh-1.4c/0001-Make-install-rule-friendly-towards-packaging-with-DE.patch
>> @@ -0,0 +1,47 @@
>> +From: Jon Ringle <jringle@gridpoint.com>
>> +Date: Fri, 27 Jun 2014 16:39:41 -0400
>> +Subject: [PATCH] Make install rule friendly towards packaging with $DESTDIR
>> +
>> +Signed-off-by: Jon Ringle <jringle@gridpoint.com>
>> +---
>> + Makefile.in | 30 +++++++++++++++---------------
>> + 1 file changed, 15 insertions(+), 15 deletions(-)
>> +
>> +diff --git a/Makefile.in b/Makefile.in
>> +index fb7cc1d..a8e7a7e 100644
>> +--- a/Makefile.in
>> ++++ b/Makefile.in
>> +@@ -45,18 +45,18 @@ distclean: allclean
>> + - /bin/rm -f Makefile
>> +
>> + install: $(TARGET)
>> +- mkdir -p -m 755 $(bindir)
>> +- mkdir -p -m 755 $(prefix)/share/doc/autossh
>> +- mkdir -p -m 755 $(datadir)/examples/autossh
>> +- mkdir -p -m 755 $(mandir)/man1
>> +- cp $(TARGET) $(bindir)
>> +- cp CHANGES README $(datadir)/doc/autossh
>> +- cp autossh.host $(datadir)/examples/autossh
>> +- cp rscreen $(datadir)/examples/autossh
>> +- cp autossh.1 $(mandir)/man1
>> +- chmod 755 $(bindir)/$(TARGET)
>> +- chmod 644 $(datadir)/doc/autossh/CHANGES
>> +- chmod 644 $(datadir)/doc/autossh/README
>> +- chmod 644 $(datadir)/examples/autossh/autossh.host
>> +- chmod 644 $(datadir)/examples/autossh/rscreen
>> +- chmod 644 $(mandir)/man1/autossh.1
>> ++ mkdir -p -m 755 $(DESTDIR)$(bindir)
>> ++ mkdir -p -m 755 $(DESTDIR)$(prefix)/share/doc/autossh
>> ++ mkdir -p -m 755 $(DESTDIR)$(datadir)/examples/autossh
>> ++ mkdir -p -m 755 $(DESTDIR)$(mandir)/man1
>> ++ cp $(TARGET) $(DESTDIR)$(bindir)
>> ++ cp CHANGES README $(DESTDIR)$(datadir)/doc/autossh
>> ++ cp autossh.host $(DESTDIR)$(datadir)/examples/autossh
>> ++ cp rscreen $(DESTDIR)$(datadir)/examples/autossh
>> ++ cp autossh.1 $(DESTDIR)$(mandir)/man1
>> ++ chmod 755 $(DESTDIR)$(bindir)/$(TARGET)
>> ++ chmod 644 $(DESTDIR)$(datadir)/doc/autossh/CHANGES
>> ++ chmod 644 $(DESTDIR)$(datadir)/doc/autossh/README
>> ++ chmod 644 $(DESTDIR)$(datadir)/examples/autossh/autossh.host
>> ++ chmod 644 $(DESTDIR)$(datadir)/examples/autossh/rscreen
>> ++ chmod 644 $(DESTDIR)$(mandir)/man1/autossh.1
>> diff --git a/patches/autossh-1.4c/series b/patches/autossh-1.4c/series
>> new file mode 100644
>> index 0000000..29f971c
>> --- /dev/null
>> +++ b/patches/autossh-1.4c/series
>> @@ -0,0 +1,4 @@
>> +# generated by git-ptx-patches
>> +#tag:base --start-number 1
>> +0001-Make-install-rule-friendly-towards-packaging-with-DE.patch
>> +# ecdd87ec5c25c56d421024daf8acf722 - git-ptx-patches magic
>> diff --git a/rules/autossh.in b/rules/autossh.in
>> new file mode 100644
>> index 0000000..71ebf91
>> --- /dev/null
>> +++ b/rules/autossh.in
>> @@ -0,0 +1,7 @@
>> +## SECTION=networking
>> +
>> +config AUTOSSH
>> + tristate
>> + prompt "autossh"
>> + help
>> + Automatically restart SSH sessions and tunnels
>> diff --git a/rules/autossh.make b/rules/autossh.make
>> new file mode 100644
>> index 0000000..38c64d3
>> --- /dev/null
>> +++ b/rules/autossh.make
>> @@ -0,0 +1,53 @@
>> +# -*-makefile-*-
>> +#
>> +# Copyright (C) 2014 by Jon Ringle <jringle@gridpoint.com>
>> +#
>> +# See CREDITS for details about who has contributed to this project.
>> +#
>> +# For further information about the PTXdist project and license conditions
>> +# see the README file.
>> +#
>> +
>> +#
>> +# We provide this package
>> +#
>> +PACKAGES-$(PTXCONF_AUTOSSH) += autossh
>> +
>> +#
>> +# Paths and names
>> +#
>> +AUTOSSH_VERSION := 1.4c
>> +AUTOSSH_MD5 := 26520eea934f296be0783dabe7fcfd28
>> +AUTOSSH := autossh-$(AUTOSSH_VERSION)
>> +AUTOSSH_SUFFIX := tgz
>> +AUTOSSH_URL := http://www.harding.motd.ca/autossh/$(AUTOSSH).$(AUTOSSH_SUFFIX)
>
> Connecting to www.harding.motd.ca (www.harding.motd.ca)|70.72.193.225|:80... failed: Connection timed out.
>
> I'll try again later to see if it's only temporary.
>
I saw it down earlier this morning as well, but it seems to be back up
again. Please try again :)
>> +AUTOSSH_SOURCE := $(SRCDIR)/$(AUTOSSH).$(AUTOSSH_SUFFIX)
>> +AUTOSSH_DIR := $(BUILDDIR)/$(AUTOSSH)
>> +AUTOSSH_LICENSE := unknown
>> +
>> +# ----------------------------------------------------------------------------
>> +# Prepare
>> +# ----------------------------------------------------------------------------
>> +
>> +AUTOSSH_CONF_TOOL := autoconf
>
> Really no relevant configure options?
It worked for me without specifying any configure options. However,
perhaps ptxdist might care about this one:
--with-ssh=ARG specify path to ssh executable
>
> Michael
>
>> +
>> +# ----------------------------------------------------------------------------
>> +# Target-Install
>> +# ----------------------------------------------------------------------------
>> +
>> +$(STATEDIR)/autossh.targetinstall:
>> + @$(call targetinfo)
>> +
>> + @$(call install_init, autossh)
>> + @$(call install_fixup, autossh,PRIORITY,optional)
>> + @$(call install_fixup, autossh,SECTION,base)
>> + @$(call install_fixup, autossh,AUTHOR,"Jon Ringle <jringle@gridpoint.com>")
>> + @$(call install_fixup, autossh,DESCRIPTION,missing)
>> +
>> + @$(call install_copy, autossh, 0, 0, 0755, -, /usr/bin/autossh)
>> +
>> + @$(call install_finish, autossh)
>> +
>> + @$(call touch)
>> +
>> +# vim: syntax=make
>> --
>> 1.8.5.4
>>
>>
>> --
>> ptxdist mailing list
>> ptxdist@pengutronix.de
>>
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2014-06-30 18:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-27 21:15 jon
2014-06-30 9:00 ` Michael Olbrich
2014-06-30 18:15 ` Jon Ringle [this message]
2014-06-30 18:22 ` Jon Ringle
2014-06-30 18:27 ` Jon Ringle
2014-07-01 11:00 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMwGMjzkFYd6vKm-nyekz7Oeuywwg=ZdvVL1Xm=Dgd7VPN+NMQ@mail.gmail.com' \
--to=jon@ringle.org \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox