From: Jon Ringle <jon@ringle.org>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCHv4] ptxdist getdev: Download dev packages from ${PTXCONF_PROJECT_DEVMIRROR}
Date: Fri, 24 Jan 2014 13:09:13 -0500 [thread overview]
Message-ID: <CAMwGMjzaqiF7OaObYj-dWZ04YbpxOb=z6PFER1itbqDtEB=-PA@mail.gmail.com> (raw)
In-Reply-To: <1390586381-19896-1-git-send-email-jon@ringle.org>
On Fri, Jan 24, 2014 at 12:59 PM, <jon@ringle.org> wrote:
> From: Jon Ringle <jringle@gridpoint.com>
>
> This patch allows you to setup a dev package mirror to hold *-dev.tar.gz
> packages.
>
> Upload your *-dev.tar.gz packages to your mirror, then you can avoid
> rebuilding all your packages by doing:
>
> ptxdist getdev
>
> Signed-off-by: Jon Ringle <jringle@gridpoint.com>
> ---
> bin/ptxdist | 5 +++++
> rules/post/ptxd_make_world_get.make | 9 +++++++++
> rules/project-name.in | 9 +++++++++
> scripts/lib/ptxd_lib_dgen.awk | 7 +++++++
> scripts/lib/ptxd_make_get.sh | 15 ++++++++-------
> 5 files changed, 38 insertions(+), 7 deletions(-)
>
> diff --git a/bin/ptxdist b/bin/ptxdist
> index f9cbdec..663c41e 100755
> --- a/bin/ptxdist
> +++ b/bin/ptxdist
> @@ -1789,6 +1789,11 @@ EOF
> fi
> exit
> ;;
> + getdev)
> + check_premake &&
> + ptxd_make_log getdev
> + exit
> + ;;
> go|images)
> do_${cmd}
> exit
> diff --git a/rules/post/ptxd_make_world_get.make b/rules/post/ptxd_make_world_get.make
> index 152674c..b99102f 100644
> --- a/rules/post/ptxd_make_world_get.make
> +++ b/rules/post/ptxd_make_world_get.make
> @@ -26,6 +26,11 @@ $(SRCDIR)/%:
> @$(call targetinfo)
> @$(call get, $($@))
>
> +ifneq ($(call remove_quotes, $(PTXCONF_PROJECT_DEVPKGDIR)),)
> +$(call remove_quotes, $(PTXCONF_PROJECT_DEVPKGDIR))/%-dev.tar.gz:
> + @$(call targetinfo)
> + @$(call getdev, $@)
> +endif
>
> $(STATEDIR)/%.get:
> @$(call targetinfo)
> @@ -59,4 +64,8 @@ get = \
> check_src = \
> ptxd_make_check_src "$($(strip $(1))_SOURCE)" "$($(strip $(1))_MD5)"
>
> +getdev = \
> + ptxd_make_get_nofail=y \
> + ptxd_make_get "$(strip $(1))" "$(call remove_quotes, $(PTXCONF_PROJECT_DEVMIRROR))/$(notdir $(1))"
> +
> # vim: syntax=make
> diff --git a/rules/project-name.in b/rules/project-name.in
> index f546458..d1cd09a 100644
> --- a/rules/project-name.in
> +++ b/rules/project-name.in
> @@ -180,4 +180,13 @@ config PROJECT_DEVPKGDIR
> depends on PROJECT_USE_DEVPKGS
> default "/opt/OSELAS.BSP/${PTXCONF_PROJECT_VENDOR}/OSELAS.BSP-${PTXCONF_PROJECT_VENDOR}-${PTXCONF_PROJECT}${PTXCONF_PROJECT_VERSION}"
>
> +config PROJECT_DEVMIRROR
> + string
> + prompt "Mirror for pre-build archives"
> + depends on PROJECT_USE_DEVPKGS
> + help
> + Enter a URL where *-dev.tar.gz packages can be downloaded
> + Use: ptxdist getdev
> +
> +
> endmenu
> diff --git a/scripts/lib/ptxd_lib_dgen.awk b/scripts/lib/ptxd_lib_dgen.awk
> index 7f790c9..6cd60e2 100644
> --- a/scripts/lib/ptxd_lib_dgen.awk
> +++ b/scripts/lib/ptxd_lib_dgen.awk
> @@ -241,6 +241,13 @@ function write_deps_pkg_all(this_PKG, this_pkg) {
> # .get rule
> #
> print "$(STATEDIR)/" this_pkg ".get: $(" this_PKG "_SOURCES)" > DGEN_DEPS_POST;
> + print "ifneq ($(call remove_quotes, $(PTXCONF_PROJECT_DEVMIRROR)),)" > DGEN_DEPS_POST;
> + print "ifneq ($($(" this_PKG "_DEVPKG)),NO)" > DGEN_DEPS_POST;
> + print "ifneq ($(" this_PKG "_CFGHASH),)" > DGEN_DEPS_POST;
> + print "getdev: $(call remove_quotes, $(PTXCONF_PROJECT_DEVPKGDIR))/$(" this_PKG "_DEVPKG)" > DGEN_DEPS_POST;
> + print "endif" > DGEN_DEPS_POST;
> + print "endif" > DGEN_DEPS_POST;
> + print "endif" > DGEN_DEPS_POST;
> }
>
> function write_deps_pkg_active(this_PKG, this_pkg, prefix) {
> diff --git a/scripts/lib/ptxd_make_get.sh b/scripts/lib/ptxd_make_get.sh
> index f4d7922..1ce913f 100644
> --- a/scripts/lib/ptxd_make_get.sh
> +++ b/scripts/lib/ptxd_make_get.sh
> @@ -285,7 +285,7 @@ ptxd_make_get() {
> argv[${#argv[@]}]="${url}"
> mrd=true
> ;;
> - ${PTXCONF_SETUP_PTXMIRROR}/*)
> + ${PTXCONF_SETUP_PTXMIRROR}/*|${PTXCONF_PROJECT_DEVMIRROR}/*)
I moved this to where you asked me to, but now since mrd is
conditionally set, it is always replacing PTXCONF_SETUP_PTXMIRROR for
the DEVMIRROR. When I had it on the previous case in the switch, it
would not do that. This brings me back to the other issue I'm having
http://article.gmane.org/gmane.comp.embedded.ptxdist.devel/10980
> # if mirror is given us to download, add it, but only once
> if ! ${mrd}; then
> argv[${#argv[@]}]="${url}"
> @@ -397,11 +397,12 @@ ptxd_make_get() {
> esac
> done
>
> - echo
> - echo "Could not download package"
> - echo "URL: ${orig_argv[@]}"
> - echo
> - exit 1
> + if [ "${ptxd_make_get_nofail}" != "y" ]; then
> + echo
> + echo "Could not download package"
> + echo "URL: ${orig_argv[@]}"
> + echo
> + exit 1
> + fi
> }
> -
> export -f ptxd_make_get
> --
> 1.7.10.4
>
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2014-01-24 18:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-24 17:59 jon
2014-01-24 18:09 ` Jon Ringle [this message]
2014-01-29 14:27 ` Michael Olbrich
2014-02-01 20:37 ` Jon Ringle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMwGMjzaqiF7OaObYj-dWZ04YbpxOb=z6PFER1itbqDtEB=-PA@mail.gmail.com' \
--to=jon@ringle.org \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox