From: Albert Antony <albert@newtec.dk>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] Platformconfig CPU architecture for x86_64
Date: Fri, 8 Feb 2013 17:28:09 +0100 [thread overview]
Message-ID: <CAHChq8P6iJMdYJQ15=7tq6CEiJy_j5t-jV3uMPN0_5nqe5w4Tw@mail.gmail.com> (raw)
In-Reply-To: <20130207173615.GA6194@pengutronix.de>
[-- Attachment #1.1: Type: text/plain, Size: 3995 bytes --]
> I know. It's on my todo list, but I've not found the time to implement this
> yet.
> Send patches :-)
>
> Michael
>
The following patch works for me. Have only patched files for the packages
I am using. Comments and suggestions appreciated :)
Cheers,
Albert.
Index: ptxdist-2013.01.0/platforms/architecture.in
===================================================================
--- ptxdist-2013.01.0.orig/platforms/architecture.in 2013-01-08
10:40:10.000000000 +0100
+++ ptxdist-2013.01.0/platforms/architecture.in 2013-02-08
11:03:57.877905582 +0100
@@ -52,6 +52,14 @@
help
This is support for the Intel x86 architecture.
+ config ARCH_X86_64
+ bool "x86_64 "
+ select HAS_MMU
+ select HAS_PCI
+ select ARCH_SUPPORTS_ENDIAN_LITTLE
+ help
+ This is support for the Intel x86_64 architecture.
+
config ARCH_MINGW
bool "mingw "
select HAS_MMU
@@ -241,6 +249,7 @@
prompt "hardware floating point"
default y if ARCH_ALPHA
default y if ARCH_X86
+ default y if ARCH_X86_64
default y if ARCH_SPARC
default n
@@ -263,7 +272,7 @@
config SIZEOF_LONG_DOUBLE
string
default "12" if ARCH_X86
-# default "16" if ARCH_X86_64
+ default "16" if ARCH_X86_64
default "8"
# FIXME: add more values
@@ -278,6 +287,7 @@
default "alpha" if ARCH_ALPHA
default "blackfin" if ARCH_BLACKFIN
default "i386" if ARCH_X86
+ default "x86_64" if ARCH_X86_64
default "i386" if ARCH_MINGW
default "m68k" if ARCH_M68K
default "ppc" if ARCH_PPC
Index: ptxdist-2013.01.0/rules/openssl.make
===================================================================
--- ptxdist-2013.01.0.orig/rules/openssl.make 2013-01-08 10:40:10.000000000
+0100
+++ ptxdist-2013.01.0/rules/openssl.make 2013-02-08 11:11:51.237919688 +0100
@@ -40,6 +40,7 @@
OPENSSL_ARCH-$(PTXCONF_ARCH_X86_I686) += debian-i386-i686/cmov
OPENSSL_ARCH-$(PTXCONF_ARCH_X86_P2) += debian-i386-i686/cmov
OPENSSL_ARCH-$(PTXCONF_ARCH_X86_P3M) += debian-i386-i686/cmov
+OPENSSL_ARCH-$(PTXCONF_ARCH_X86_64) += debian-amd64
OPENSSL_ARCH-$(PTXCONF_ARCH_M68K) += debian-m68k
OPENSSL_ARCH-$(PTXCONF_ARCH_PPC) += debian-powerpc
OPENSSL_ARCH-$(PTXCONF_ARCH_SPARC) += debian-sparc
Index: ptxdist-2013.01.0/rules/pre/kernel.make
===================================================================
--- ptxdist-2013.01.0.orig/rules/pre/kernel.make 2013-01-08
10:40:10.000000000 +0100
+++ ptxdist-2013.01.0/rules/pre/kernel.make 2013-02-08 11:15:16.465925804
+0100
@@ -28,6 +28,9 @@
ifdef PTXCONF_ARCH_X86
GENERIC_KERNEL_ARCH := "x86"
endif
+ifdef PTXCONF_ARCH_X86_64
+GENERIC_KERNEL_ARCH := "x86_64"
+endif
ifdef PTXCONF_ARCH_PPC
GENERIC_KERNEL_ARCH := "powerpc"
endif
Index: ptxdist-2013.01.0/rules/lm_sensors.make
===================================================================
--- ptxdist-2013.01.0.orig/rules/lm_sensors.make 2013-02-08
11:30:13.601952539 +0100
+++ ptxdist-2013.01.0/rules/lm_sensors.make 2013-02-08 11:51:37.461990796
+0100
@@ -69,7 +69,7 @@
@$(call install_copy, lm_sensors, 0, 0, 0755, -, /usr/sbin/pwmconfig)
endif
-ifdef PTXCONF_ARCH_X86
+ifneq ($(call ifdef_any_of,PTXCONF_ARCH_X86 PTXCONF_ARCH_X86_64),)
ifdef PTXCONF_LM_SENSORS_ISASET
@$(call install_copy, lm_sensors, 0, 0, 0755, -, /usr/sbin/isaset)
endif
Index: ptxdist-2013.01.0/platforms/kernel.in
===================================================================
--- ptxdist-2013.01.0.orig/platforms/kernel.in 2013-01-08
10:40:10.000000000 +0100
+++ ptxdist-2013.01.0/platforms/kernel.in 2013-02-08 13:55:40.722212603
+0100
@@ -41,9 +41,10 @@
choice
prompt "kernel architecture "
- depends on ARCH_PPC || ARCH_X86
+ depends on ARCH_PPC || ARCH_X86 || ARCH_X86_64
default KERNEL_ARCH_POWERPC if ARCH_PPC
default KERNEL_ARCH_X86 if ARCH_X86
+ default KERNEL_ARCH_X86_64 if ARCH_X86_64
help
For x86 and PowerPC there are different possibilities to set the kernel
architecture:
@@ -74,7 +75,7 @@
config KERNEL_ARCH_X86_64
bool
- depends on ARCH_X86
+ depends on ARCH_X86_64
prompt "x86_64 "
endchoice
[-- Attachment #1.2: Type: text/html, Size: 10286 bytes --]
[-- Attachment #2: Type: text/plain, Size: 48 bytes --]
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2013-02-08 16:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-07 12:32 Albert Antony
2013-02-07 17:36 ` Michael Olbrich
2013-02-08 16:28 ` Albert Antony [this message]
2013-02-08 16:32 ` Albert Antony
2013-02-18 14:16 ` [ptxdist] [PATCH] " Albert Antony
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAHChq8P6iJMdYJQ15=7tq6CEiJy_j5t-jV3uMPN0_5nqe5w4Tw@mail.gmail.com' \
--to=albert@newtec.dk \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox