Hi!
Thanks you.
Now work almost every examples, but some fails e.g. df_palette
   ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.3 |~~~~~~~~~~~~~~~~~~~~~~~~~~
        (c) 2001-2009  The world wide DirectFB Open Source Community
        (c) 2000-2004  Convergence (integrated media) GmbH
      ----------------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2015-04-17 07:43) [ DEBUG ][
TRACE ]
(*) Direct/Memcpy: Using armasm_memcpy()
(*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0]
<8388608>...
(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/FBDev: Found 's3c2410fb' (ID 0) with frame buffer at
0x33980000, 150k (MMIO 0x00000000, 0k)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: S3C24XX TouchScreen (1) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: pwm-beeper (2) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: gpio-keys (3) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: Dell Dell USB Mouse (4) 0.1 (directfb.org)
(*) Direct/Thread: Started 'tslib Input' (-1) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: tslib touchscreen 0 0.1 (tslib)
(*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
(!) DirectFB/DirectFBCreate: Setting desktop resolution to 0x0 failed!
     -> Using default resolution.
(!) DirectFB/DirectFBCreate: Setting desktop format failed!
     -> Using default format.
(!) DirectFB/DirectFBCreate: Setting desktop buffer mode failed!
     -> No virtual resolution support or not enough memory?
        Falling back to system back buffer.
df_palette.c <140>:
        (#) DirectFBError [dfb->CreateSurface( dfb, &sdsc, &primary )]: Not
supported!
 (!!!)  *** WARNING [Application exited without deinitialization of
DirectFB!] *** [core.c:862 in dfb_core_deinit_check()]
 (!!!)  *** WARNING [still objects in 'Layer Region Pool'] ***
[object.c:241 in fusion_object_pool_destroy()]
 (!!!)  *** WARNING [still objects in 'Layer Context Pool'] ***
[object.c:241 in fusion_object_pool_destroy()]
 (!!!)  *** WARNING [still objects in 'Surface Pool'] *** [object.c:241 in
fusion_object_pool_destroy()]
Interface instances remaining (2):
  - 'IDirectFB' at 0x1dfdd8 (dfb) allocated in DirectFBCreate (directfb.c:
197)
  - 'IDirectFBEventBuffer' at 0x1e1a00 (iface) allocated in
IDirectFB_CreateInputEventBuffer (idirectfb.c: 1097)

Do I have to configure something else?

Thanks!
Regards, Alex.

2015-04-16 14:45 GMT+02:00 Juergen Borleis <jbe@pengutronix.de>:

> On Thursday 16 April 2015 13:28:34 Alejandro Vázquez wrote:
> > Hi, I'm trying to use directfb in mini2440, but when I try to launch
> > dfbinfo gives me an error:
> >
> >
> >    ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.3 |~~~~~~~~~~~~~~~~~~~~~~~~~~
> >         (c) 2001-2009  The world wide DirectFB Open Source Community
> >         (c) 2000-2004  Convergence (integrated media) GmbH
> >       ----------------------------------------------------------------
> >
> > (*) DirectFB/Core: Single Application Core. (2015-04-16 11:05) [ DEBUG
> ][TRACE]
> > (*) Direct/Memcpy: Using armasm_memcpy()
> > (!) DirectFB/core/vt: Couldn't open neither `/dev/tty0' nor `/dev/vc/0'!
> >     --> No such file or directory
> > [...]
>
> Enable TTY and "virtual terminal" support in the kernel for this target.
>
> Regards,
> Juergen
>
> --
> Pengutronix e.K.                              | Juergen Borleis
>   |
> Industrial Linux Solutions                    | http://www.pengutronix.de/
> |
>