Booting Linux on physical CPU 0 Initializing cgroup subsys cpu Linux version 3.7.1-ptx-2012.12.0 (pawel@devbox) (gcc version 4.7.2 (OSELAS.Toolchain-2012.12.1) ) #6 PREEMPT Thu Aug 8 23:11:13 CEST 2013 CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 CPU: VIVT data cache, VIVT instruction cache Machine: MINI2440 Memory policy: ECC disabled, Data cache writeback CPU S3C2440A (id 0x32440001) S3C24XX Clocks, Copyright 2004 Simtec Electronics S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on On node 0 totalpages: 16384 free_area_init_node: node 0, pgdat c03c5d64, node_mem_map c03e5000 Normal zone: 128 pages used for memmap Normal zone: 0 pages reserved Normal zone: 16256 pages, LIFO batch:3 pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=ttySAC0,115200 mini2440=1tb ip=none root=/dev/mtdblock3 rootfstype=jffs2 noinitrd mtdparts=nand:512k(barebox),384k(bareboxenv),2048k(kernel),-(root) PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 60944k/60944k available, 4592k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xc4800000 - 0xff000000 ( 936 MB) lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc037fb3c (3551 kB) .init : 0xc0380000 - 0xc039bf50 ( 112 kB) .data : 0xc039c000 - 0xc03c64a0 ( 170 kB) .bss : 0xc03c64c4 - 0xc03e4a38 ( 122 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:85 irq: clearing pending ext status 00000080 irq: clearing subpending status 00000002 timer tcon=00500000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57 sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms Calibrating delay loop... 201.52 BogoMIPS (lpj=503808) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok Setting up static identity map for 0x302ee398 - 0x302ee3d4 devtmpfs: initialized NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations i2c-core: driver [dummy] registered MINI2440: Option string mini2440=1tb MINI2440: LCD 0:240x320 [1:800x480] 2:1024x768 3:240x320 4:640x480 5:240x320 6:320x240 7:480x272 S3C2440: Initialising architecture S3C2440: IRQ Support S3C244X: Clock Support, DVS off S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics DMA channel 0 at c4846000, irq 33 DMA channel 1 at c4846040, irq 34 DMA channel 2 at c4846080, irq 35 DMA channel 3 at c48460c0, irq 36 s3c24xx-pwm s3c24xx-pwm.0: tin at 25312500, tdiv at 25312500, tin=divclk, base 0 S3C24XX CPU Frequency driver, s3c244x cpu support bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb s3c-i2c s3c2440-i2c: clock source c03a8890 s3c-i2c s3c2440-i2c: registers c4848000 (c3873520, c03aa898) s3c-i2c s3c2440-i2c: slave address 0x10 s3c-i2c s3c2440-i2c: pdata desired frequency 100000 s3c-i2c s3c2440-i2c: IICLC=00000006 s3c-i2c s3c2440-i2c: bus frequency set to 98 KHz s3c-i2c s3c2440-i2c: S3C2410_IICCON=0xa0 i2c i2c-0: adapter [s3c2410-i2c] registered i2c 0-0050: uevent i2c i2c-0: client [24c08] registered with bus id 0-0050 s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized cfg80211: Calling CRDA to update world regulatory domain NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. s3c-adc s3c24xx-adc: attached adc driver jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 119 io scheduler noop registered io scheduler cfq registered (default) s3c2410-lcd s3c2410-lcd: fb0: s3c2410fb frame buffer device s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440 console [ttySAC0] enabled s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440 s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440 at24 0-0050: probe i2c 0-0051: uevent dummy 0-0051: probe i2c i2c-0: client [dummy] registered with bus id 0-0051 i2c 0-0052: uevent dummy 0-0052: probe i2c i2c-0: client [dummy] registered with bus id 0-0052 i2c 0-0053: uevent dummy 0-0053: probe i2c i2c-0: client [dummy] registered with bus id 0-0053 at24 0-0050: 1024 byte 24c08 EEPROM, writable, 16 bytes/write i2c-core: driver [at24] registered s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns s3c24xx-nand s3c2440-nand: NAND hardware ECC NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit), page size: 2048, OOB size: 64 Bad block table found at page 524224, version 0x01 Bad block table found at page 524160, version 0x01 4 cmdlinepart partitions found on MTD device nand Creating 4 MTD partitions on "nand": 0x000000000000-0x000000080000 : "barebox" 0x000000080000-0x0000000e0000 : "bareboxenv" 0x0000000e0000-0x0000002e0000 : "kernel" 0x0000002e0000-0x000040000000 : "root" s3c24xx-nand s3c2440-nand: clock idle support enabled dm9000 Ethernet Driver, V1.31 eth0: dm9000e at c4978300,c497a304 IRQ 51 MAC: 00:00:00:fa:00:02 (chip) usbcore: registered new interface driver rt2800usb ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver s3c2410-ohci s3c2410-ohci: S3C24XX OHCI s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new interface driver usblp usbcore: registered new interface driver cdc_wdm Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. samsung-ts s3c2440-ts: driver attached, registering input device input: S3C24XX TouchScreen as /devices/virtual/input/input0 input: pwm-beeper as /devices/platform/s3c24xx-pwm.0/pwm-beeper/input/input1 s3c-rtc s3c2410-rtc: rtc disabled, re-enabling s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c-core: driver [smbus_alert] registered i2c /dev entries driver i2c-dev: adapter [s3c2410-i2c] registered as minor 0 s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized Bluetooth: HCILL protocol initialized Bluetooth: HCIATH3K protocol initialized Bluetooth: HCI Three-wire UART (H5) protocol initialized usbcore: registered new interface driver btusb Bluetooth: Generic Bluetooth SDIO driver ver 0.1 cpuidle: using governor ladder s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz). s3c-sdi s3c2440-sdi: powered down. s3c-sdi s3c2440-sdi: mmc0 - using pio, hw SDIO IRQ Registered led device: led1 Registered led device: led2 Registered led device: led3 Registered led device: led4 Registered led device: backlight ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered NET: Registered protocol family 17 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' input: gpio-keys as /devices/platform/gpio-keys/input/input2 s3c-rtc s3c2410-rtc: setting system clock to 2013-09-15 23:05:42 UTC (1379286342) jffs2: Empty flash at 0x05cd8f2c ends at 0x05cd9000 VFS: Mounted root (jffs2 filesystem) on device 31:3. devtmpfs: mounted Freeing init memory: 108K >udevd[400]: starting version 182 at24 0-0050: uevent dummy 0-0051: uevent dummy 0-0052: uevent dummy 0-0053: uevent at24 0-0050: uevent at24 0-0050: uevent dummy 0-0051: uevent dummy 0-0051: uevent dummy 0-0051: uevent dummy 0-0052: uevent dummy 0-0052: uevent dummy 0-0053: uevent dummy 0-0053: uevent at24 0-0050: uevent dummy 0-0052: uevent dummy 0-0053: uevent