Re: [ptxdist] [PATCH] u-boot: Add support for SPL for non-OMAP CPUs

[Guillermo Rodriguez Garcia <guille.rodriguez@gmail.com>]

Hello,

Any comments?

Thank you,

Guillermo
El mar., 23 oct. 2018 a las 16:32, Guillermo Rodríguez
(<guille.rodriguez@gmail.com>) escribió:
>
> Add support for installing the SPL binary for non-OMAP CPUs.
>
> Also properly remove any files installed in the platform image
> directory in the clean stage.
>
> Signed-off-by: Guillermo Rodriguez <guille.rodriguez@gmail.com>
> ---
>  platforms/u-boot.in | 14 +++++++++++---
>  rules/u-boot.make   |  4 ++++
>  2 files changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/platforms/u-boot.in b/platforms/u-boot.in
> index 38684a0..602de46 100644
> --- a/platforms/u-boot.in
> +++ b/platforms/u-boot.in
> @@ -49,6 +49,13 @@ config U_BOOT_INSTALL_ELF
>         help
>           Installing the U-Boot ELF binary into platform image directory.
>
> +config U_BOOT_INSTALL_SPL
> +       prompt "install SPL"
> +       bool
> +       help
> +         Installing the U-Boot SPL (Secondary Program Loader) binary into
> +         platform image directory.
> +
>  config U_BOOT_INSTALL_MLO
>         prompt "install MLO"
>         bool
> @@ -57,14 +64,14 @@ config U_BOOT_INSTALL_MLO
>           Installing the U-Boot SPL ("MLO") binary needed for OMAP CPUs into platform
>           image directory.
>
> -if U_BOOT_INSTALL_MLO
> +if U_BOOT_INSTALL_MLO || U_BOOT_INSTALL_SPL
>
>  config U_BOOT_INSTALL_U_BOOT_IMG
>         prompt "install u-boot.img"
>         bool
>         help
>           Installing the u-boot image with header ("u-boot.img") which is executed
> -         by u-boot SPL ("MLO") into platform image directory.
> +         by u-boot SPL into platform image directory.
>
>  endif
>
> @@ -73,7 +80,8 @@ config U_BOOT_INSTALL_U_BOOT_IMX
>         bool
>         help
>           Installing the U-Boot image with imx header (u-boot.imx) into platform
> -         image directory. Say yes if you are building for freescale i.MX SOC
> +         image directory. Say yes if you are building for freescale i.MX SOCs
> +         and are not using SPL.
>
>  endif
>
> diff --git a/rules/u-boot.make b/rules/u-boot.make
> index 94aa774..9f69f9d 100644
> --- a/rules/u-boot.make
> +++ b/rules/u-boot.make
> @@ -69,6 +69,9 @@ endif
>  ifdef PTXCONF_U_BOOT_INSTALL_ELF
>         @install -D -m644 $(U_BOOT_DIR)/u-boot $(IMAGEDIR)/u-boot.elf
>  endif
> +ifdef PTXCONF_U_BOOT_INSTALL_SPL
> +       @install -D -m644 $(U_BOOT_DIR)/SPL $(IMAGEDIR)/SPL
> +endif
>  ifdef PTXCONF_U_BOOT_INSTALL_MLO
>         @install -D -m644 $(U_BOOT_DIR)/MLO $(IMAGEDIR)/MLO
>  endif
> @@ -88,6 +91,7 @@ $(STATEDIR)/u-boot.clean:
>         @$(call targetinfo)
>         @$(call clean_pkg, U_BOOT)
>         @rm -f $(IMAGEDIR)/u-boot.bin $(IMAGEDIR)/u-boot.srec $(IMAGEDIR)/u-boot.elf
> +       @rm -f $(IMAGEDIR)/u-boot.img $(IMAGEDIR)/SPL $(IMAGEDIR)/MLO
>         @rm -f $(IMAGEDIR)/u-boot.imx
>
>  # vim: syntax=make
> --
> 1.9.1
>


-- 
Guillermo Rodriguez Garcia
guille.rodriguez@gmail.com

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de