[ptxdist] Compilation for ARM926ej-s --> S3c2451

[ptxdist] Compilation for ARM926ej-s --> S3c2451

[Carlos Leyva Guerrero]

[-- Attachment #1.1: Type: text/plain, Size: 6308 bytes --]

Hi,

I'm currently trying to adapt mini2440 platform to mini2451(by
FriendlyARM). Leaving the topic of the bootloader a side, I currently have
something functional with Ptxdist 2014.10.0.

I am able to compile everything well using the toolchain provided by
Friendly ARM (old glibc -> no current udev support), the one provided by
CodeSourcery (Sourcery G++ Lite 2009q3-67) or OSELAS.Toolchain.2013.12.2
(armv5t).

The rootfs generated works well despite the used toolchain. Nevertheless
the generated zImage doesn't boot in the board when using the OSELAS
toolchain. Has anyone had a similar problem or can figure what its
happening here?


Thanks in advance.

P.D: Is it curious that the FriendlyARM toolchain is not even targeted to
this processor.

I include here the 3 outputs of arm....gcc -version for reference:
FriendlyArm

> Using built-in specs.
>
> Target: arm-none-linux-gnueabi
>
> Configured with:
>> /opt/FriendlyARM/mini2440/build-toolschain/working/src/gcc-4.4.3/configure
>> --build=i386-build_redhat-linux-gnu --host=i386-build_redhat-linux-gnu
>> --target=arm-none-linux-gnueabi --prefix=/opt/FriendlyARM/toolschain/4.4.3
>> --with-sysroot=/opt/FriendlyARM/toolschain/4.4.3/arm-none-linux-gnueabi//sys-root
>> --enable-languages=c,c++ --disable-multilib --with-arch=armv4t
>> --with-cpu=arm920t --with-tune=arm920t --with-float=soft
>> --with-pkgversion=ctng-1.6.1 --disable-sjlj-exceptions
>> --enable-__cxa_atexit --with-gmp=/opt/FriendlyARM/toolschain/4.4.3
>> --with-mpfr=/opt/FriendlyARM/toolschain/4.4.3
>> --with-ppl=/opt/FriendlyARM/toolschain/4.4.3
>> --with-cloog=/opt/FriendlyARM/toolschain/4.4.3
>> --with-mpc=/opt/FriendlyARM/toolschain/4.4.3
>> --with-local-prefix=/opt/FriendlyARM/toolschain/4.4.3/arm-none-linux-gnueabi//sys-root
>> --disable-nls --enable-threads=posix --enable-symvers=gnu --enable-c99
>> --enable-long-long --enable-target-optspace
>
> Thread model: posix
>
> gcc version 4.4.3 (ctng-1.6.1)
>
>
CodeSourcery

> Using built-in specs.
>
> Target: arm-none-linux-gnueabi
>
> Configured with:
>> /scratch/julian/2009q3-respin-linux-lite/src/gcc-4.4/configure
>> --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu
>> --target=arm-none-linux-gnueabi --enable-threads --disable-libmudflap
>> --disable-libssp --disable-libstdcxx-pch --enable-extra-sgxxlite-multilibs
>> --with-arch=armv5te --with-gnu-as --with-gnu-ld
>> --with-specs='%{funwind-tables|fno-unwind-tables|mabi=*|ffreestanding|nostdlib:;:-funwind-tables}
>> %{O2:%{!fno-remove-local-statics: -fremove-local-statics}}
>> %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics:
>> -fremove-local-statics}}}' --enable-languages=c,c++ --enable-shared
>> --disable-lto --enable-symvers=gnu --enable-__cxa_atexit
>> --with-pkgversion='Sourcery G++ Lite 2009q3-67' --with-bugurl=
>> https://support.codesourcery.com/GNUToolchain/ --disable-nls
>> --prefix=/opt/codesourcery
>> --with-sysroot=/opt/codesourcery/arm-none-linux-gnueabi/libc
>> --with-build-sysroot=/scratch/julian/2009q3-respin-linux-lite/install/arm-none-linux-gnueabi/libc
>> --with-gmp=/scratch/julian/2009q3-respin-linux-lite/obj/host-libs-2009q3-67-arm-none-linux-gnueabi-i686-pc-linux-gnu/usr
>> --with-mpfr=/scratch/julian/2009q3-respin-linux-lite/obj/host-libs-2009q3-67-arm-none-linux-gnueabi-i686-pc-linux-gnu/usr
>> --with-ppl=/scratch/julian/2009q3-respin-linux-lite/obj/host-libs-2009q3-67-arm-none-linux-gnueabi-i686-pc-linux-gnu/usr
>> --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm'
>> --with-cloog=/scratch/julian/2009q3-respin-linux-lite/obj/host-libs-2009q3-67-arm-none-linux-gnueabi-i686-pc-linux-gnu/usr
>> --disable-libgomp --enable-poison-system-directories
>> --with-build-time-tools=/scratch/julian/2009q3-respin-linux-lite/install/arm-none-linux-gnueabi/bin
>> --with-build-time-tools=/scratch/julian/2009q3-respin-linux-lite/install/arm-none-linux-gnueabi/bin
>
> Thread model: posix
>
> gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67)
>
>
OSELAS

> Using built-in specs.

COLLECT_GCC=arm-v5te-linux-gnueabi-gcc

COLLECT_LTO_WRAPPER=/opt/OSELAS.Toolchain-2013.12.2/arm-v5te-linux-gnueabi/gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/bin/../libexec/gcc/arm-v5te-linux-gnueabi/4.8.2/lto-wrapper

Target: arm-v5te-linux-gnueabi

Configured with:
> /home/mol/himalia/tmp/OSELAS.Toolchain-2013.12.2/platform-arm-v5te-linux-gnueabi-gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/build-cross/gcc-4.8.2/configure
> --build=i686-host-linux-gnu --host=i686-host-linux-gnu
> --target=arm-v5te-linux-gnueabi
> --with-sysroot=/home/mol/himalia/tmp/OSELAS.Toolchain-2013.12.2/inst/opt/OSELAS.Toolchain-2013.12.2/arm-v5te-linux-gnueabi/gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/sysroot-arm-v5te-linux-gnueabi
> --disable-multilib --with-float=soft --with-fpu=vfp --with-cpu=arm926ej-s
> --enable-__cxa_atexit --disable-sjlj-exceptions --disable-nls
> --disable-decimal-float --disable-fixed-point --disable-win32-registry
> --enable-symvers=gnu --with-pkgversion=OSELAS.Toolchain-2013.12.2
> --enable-threads=posix --with-system-zlib
> --with-gmp=/home/mol/himalia/tmp/OSELAS.Toolchain-2013.12.2/platform-arm-v5te-linux-gnueabi-gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/sysroot-host
> --with-mpfr=/home/mol/himalia/tmp/OSELAS.Toolchain-2013.12.2/platform-arm-v5te-linux-gnueabi-gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/sysroot-host
> --with-mpc=/home/mol/himalia/tmp/OSELAS.Toolchain-2013.12.2/platform-arm-v5te-linux-gnueabi-gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/sysroot-host
> --with-isl=/home/mol/himalia/tmp/OSELAS.Toolchain-2013.12.2/platform-arm-v5te-linux-gnueabi-gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/sysroot-host
> --with-cloog=/home/mol/himalia/tmp/OSELAS.Toolchain-2013.12.2/platform-arm-v5te-linux-gnueabi-gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/sysroot-host
> --prefix=/home/mol/himalia/tmp/OSELAS.Toolchain-2013.12.2/inst/opt/OSELAS.Toolchain-2013.12.2/arm-v5te-linux-gnueabi/gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized
> --enable-languages=c,c++ --enable-c99 --enable-long-long
> --enable-libstdcxx-debug --enable-profile --enable-shared --disable-libssp
> --enable-checking=release

Thread model: posix

gcc version 4.8.2 (OSELAS.Toolchain-2013.12.2)

[-- Attachment #1.2: Type: text/html, Size: 10766 bytes --]

[-- Attachment #2: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] Compilation for ARM926ej-s --> S3c2451

[Guillermo Rodriguez Garcia]

Buenos días Carlos,

2014-12-03 10:25 GMT+01:00 Carlos Leyva Guerrero <carlos.leyva@idener.es>:
> Hi,
>
> I'm currently trying to adapt mini2440 platform to mini2451(by FriendlyARM).
> Leaving the topic of the bootloader a side, I currently have something
> functional with Ptxdist 2014.10.0.
>
> I am able to compile everything well using the toolchain provided by
> Friendly ARM (old glibc -> no current udev support), the one provided by
> CodeSourcery (Sourcery G++ Lite 2009q3-67) or OSELAS.Toolchain.2013.12.2
> (armv5t).
>
> The rootfs generated works well despite the used toolchain. Nevertheless the
> generated zImage doesn't boot in the board when using the OSELAS toolchain.
> Has anyone had a similar problem or can figure what its happening here?

I also did some work a few weeks ago to add support for the Mini2451
in ptxdist. Had to put this in standby due to some high priority stuff
coming in but I had already done the following:

- Build a working OSELAS arm-v5te toolchain
- Build a working kernel (not using DT) with ptxdist and the above
toolchain. I adapted the mach-mini2451 file from the kernel supplied
by FriendlyARM
- Boot from SD (using FA's superboot) and install my kernel to NAND
- Boot my kernel from NAND and mount the rootfs over NFS
- First steps for a working barebox port

What is exactly the problem you are facing when trying to boot your image?

Guillermo

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] Compilation for ARM926ej-s --> S3c2451

[Carlos Leyva Guerrero]

[-- Attachment #1.1: Type: text/plain, Size: 3258 bytes --]

Buenas Guillermo,

- I used OSELAS arm-v5te pre-build toolchain (ubuntu repositories).
- I got two working kernels (one using friendly arm 4.4.3 toolchain and the
other with the CodeSourcery 2009q3).
- With those two kernels, I also got a fully working rootfs (burned into
nand using superboot) and i get the system up & ready, but:
    - with FA - I cannot compile udev, the used glibc version for such
toolchain seems lower than 2.10, so I get errors compiling udev ('accept4'
related).
    - with CS 2009q3 - everything alright but, the specific version of
binutils used for compiling the toolchain is not publicly available (I
suppose it was a custom build from CodeSourcery) so I cannot use the exact
same binutil version (not a big problem but..)
    - with the prebuild arm5vte oselas version, after burning to the board,
the kernel get extracted and then .. no output, system hang.
- I also used kernel from FA as source, but some modifications were done,
i.e (remove initramfs, removed cpio file, ...)

- I am currently testing the system with newer CodeSourcery version
(2013.11-33), but i have the same 'problem', custom binutils build.


You mentioned that you built a customized arm-v5te toolchain (well you don
exactly say so, but given I got no good results with the default
configuration, I will suppose that), Did you add/remove any specific FLAG
for the toolchain compilation (besides mtune)?

Regarding the barebox, I am pretty interested. I was planning also to try
it but I have no more available hours in the day, ;). Please keep me up
with you progress and let me know if you need anything.





On 3 December 2014 at 11:02, Guillermo Rodriguez Garcia <
guille.rodriguez@gmail.com> wrote:

> Buenos días Carlos,
>
> 2014-12-03 10:25 GMT+01:00 Carlos Leyva Guerrero <carlos.leyva@idener.es>:
> > Hi,
> >
> > I'm currently trying to adapt mini2440 platform to mini2451(by
> FriendlyARM).
> > Leaving the topic of the bootloader a side, I currently have something
> > functional with Ptxdist 2014.10.0.
> >
> > I am able to compile everything well using the toolchain provided by
> > Friendly ARM (old glibc -> no current udev support), the one provided by
> > CodeSourcery (Sourcery G++ Lite 2009q3-67) or OSELAS.Toolchain.2013.12.2
> > (armv5t).
> >
> > The rootfs generated works well despite the used toolchain. Nevertheless
> the
> > generated zImage doesn't boot in the board when using the OSELAS
> toolchain.
> > Has anyone had a similar problem or can figure what its happening here?
>
> I also did some work a few weeks ago to add support for the Mini2451
> in ptxdist. Had to put this in standby due to some high priority stuff
> coming in but I had already done the following:
>
> - Build a working OSELAS arm-v5te toolchain
> - Build a working kernel (not using DT) with ptxdist and the above
> toolchain. I adapted the mach-mini2451 file from the kernel supplied
> by FriendlyARM
> - Boot from SD (using FA's superboot) and install my kernel to NAND
> - Boot my kernel from NAND and mount the rootfs over NFS
> - First steps for a working barebox port
>
> What is exactly the problem you are facing when trying to boot your image?
>
> Guillermo
>

[-- Attachment #1.2: Type: text/html, Size: 4076 bytes --]

[-- Attachment #2: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] Compilation for ARM926ej-s --> S3c2451

[Guillermo Rodriguez Garcia]

2014-12-03 11:58 GMT+01:00 Carlos Leyva Guerrero <carlos.leyva@idener.es>:
> Buenas Guillermo,
>
> - I used OSELAS arm-v5te pre-build toolchain (ubuntu repositories).
> - I got two working kernels (one using friendly arm 4.4.3 toolchain and the
> other with the CodeSourcery 2009q3).
> - With those two kernels, I also got a fully working rootfs (burned into
> nand using superboot) and i get the system up & ready, but:

I am curious about this, superboot expects a yaffs2 image, which IIRC
requires kernel patches and is not supported out of the box by
ptxdist. Did you use yaffs2, or did you manage to get superboot to
install a jffs2 or ubi image ?

>     - with FA - I cannot compile udev, the used glibc version for such
> toolchain seems lower than 2.10, so I get errors compiling udev ('accept4'
> related).
>     - with CS 2009q3 - everything alright but, the specific version of
> binutils used for compiling the toolchain is not publicly available (I
> suppose it was a custom build from CodeSourcery) so I cannot use the exact
> same binutil version (not a big problem but..)
>     - with the prebuild arm5vte oselas version, after burning to the board,
> the kernel get extracted and then .. no output, system hang.

What is the last thing you see in the console?

> - I also used kernel from FA as source, but some modifications were done,
> i.e (remove initramfs, removed cpio file, ...)

Note that I did not use the kernel from FA. I used a standard 3.7
kernel with the ptxdist patches, and just adapted the mach-mini2451
file from FA.

>
> - I am currently testing the system with newer CodeSourcery version
> (2013.11-33), but i have the same 'problem', custom binutils build.
>
>
> You mentioned that you built a customized arm-v5te toolchain (well you don
> exactly say so, but given I got no good results with the default
> configuration, I will suppose that), Did you add/remove any specific FLAG
> for the toolchain compilation (besides mtune)?

I built my own but did not need any customizations. Started from
OSELAS.Toolchain-2012.12.1 (same as is used in the last published
mini2440 BSP), then just did:

ptxdist clean
rm selected_ptxconfig
ptxdist select ptxconfigs/arm-v5te-linux-gnueabi
ptxdist go

With the resulting toolchain I am able to build userland binaries and
also a kernel using ptxdist. For this I created a new "platformconfig"
based on platform-friendlyarm-mini2440. In my first tests I just
modified the platform name (as ptxdist places all output files in
platform-${platformname}) and selected the new Toolchain. I did not
touch any other architecture specific flags such as hardware floating
point support and so on -- I wanted to do a basic test first (which
worked fine)

>
> Regarding the barebox, I am pretty interested. I was planning also to try it
> but I have no more available hours in the day, ;). Please keep me up with
> you progress and let me know if you need anything.

I got it to the point where barebox is booting as a 2nd stage
bootloader, does low level PLL and SDRAM configuration, and has
working support for timers, serial ports, and Ethernet. Next on the
list was NAND support but then I found that when you use superboot to
run a "user binary" (with Action=Run instead of Action=Install) it
locks the NAND in a way that cannot be unlocked by software. So I need
to find a way around superboot in order to continue testing this.

Guillermo

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] Compilation for ARM926ej-s --> S3c2451

[Carlos Leyva Guerrero]

[-- Attachment #1.1: Type: text/plain, Size: 9199 bytes --]

On 3 December 2014 at 12:24, Guillermo Rodriguez Garcia <
guille.rodriguez@gmail.com> wrote:

> 2014-12-03 11:58 GMT+01:00 Carlos Leyva Guerrero <carlos.leyva@idener.es>:
> > Buenas Guillermo,
> >
> > - I used OSELAS arm-v5te pre-build toolchain (ubuntu repositories).
> > - I got two working kernels (one using friendly arm 4.4.3 toolchain and
> the
> > other with the CodeSourcery 2009q3).
> > - With those two kernels, I also got a fully working rootfs (burned into
> > nand using superboot) and i get the system up & ready, but:
>
> I am curious about this, superboot expects a yaffs2 image, which IIRC
> requires kernel patches and is not supported out of the box by
> ptxdist. Did you use yaffs2, or did you manage to get superboot to
> install a jffs2 or ubi image ?
>

I examined the modifications that FA performed to the 3.6 kernel and create
a diff patch, then started from a basic 3.6 clean kernel, add the patch
(there are some modifications on nand hadling an HW ECC, platform
definition, etc.). I also included support for yaffs2 (which is not my
goal, but while we have a working barebox allowing burning ubi fs....)


>
> >     - with FA - I cannot compile udev, the used glibc version for such
> > toolchain seems lower than 2.10, so I get errors compiling udev
> ('accept4'
> > related).
> >     - with CS 2009q3 - everything alright but, the specific version of
> > binutils used for compiling the toolchain is not publicly available (I
> > suppose it was a custom build from CodeSourcery) so I cannot use the
> exact
> > same binutil version (not a big problem but..)
> >     - with the prebuild arm5vte oselas version, after burning to the
> board,
> > the kernel get extracted and then .. no output, system hang.
>
> What is the last thing you see in the console?
>

The common (not remember exactly) "Decompressing Linux Kernel Image . . . "
(Same message appears with mmy other compilations, only difference is that
now it hangs there)


>
> > - I also used kernel from FA as source, but some modifications were done,
> > i.e (remove initramfs, removed cpio file, ...)
>
> Note that I did not use the kernel from FA. I used a standard 3.7
> kernel with the ptxdist patches, and just adapted the mach-mini2451
> file from FA.
>
>
Have you tested nand performance, HW ecc?

If I provide you the patch and config file I did for the kernel 3.6, would
you mind testing if you are able to compile and boot with it?


> >
> > - I am currently testing the system with newer CodeSourcery version
> > (2013.11-33), but i have the same 'problem', custom binutils build.
> >
> >
> > You mentioned that you built a customized arm-v5te toolchain (well you
> don
> > exactly say so, but given I got no good results with the default
> > configuration, I will suppose that), Did you add/remove any specific FLAG
> > for the toolchain compilation (besides mtune)?
>
> I built my own but did not need any customizations. Started from
> OSELAS.Toolchain-2012.12.1 (same as is used in the last published
> mini2440 BSP), then just did:
>
> ptxdist clean
> rm selected_ptxconfig
> ptxdist select ptxconfigs/arm-v5te-linux-gnueabi
> ptxdist go
>

Did that, but didn't work with my kernel, strange thing.


>
> With the resulting toolchain I am able to build userland binaries and
> also a kernel using ptxdist. For this I created a new "platformconfig"
> based on platform-friendlyarm-mini2440. In my first tests I just
> modified the platform name (as ptxdist places all output files in
> platform-${platformname}) and selected the new Toolchain. I did not
> touch any other architecture specific flags such as hardware floating
> point support and so on -- I wanted to do a basic test first (which
> worked fine)
>
> >
> > Regarding the barebox, I am pretty interested. I was planning also to
> try it
> > but I have no more available hours in the day, ;). Please keep me up with
> > you progress and let me know if you need anything.
>
> I got it to the point where barebox is booting as a 2nd stage
> bootloader, does low level PLL and SDRAM configuration, and has
> working support for timers, serial ports, and Ethernet. Next on the
> list was NAND support but then I found that when you use superboot to
> run a "user binary" (with Action=Run instead of Action=Install) it
> locks the NAND in a way that cannot be unlocked by software. So I need
> to find a way around superboot in order to continue testing this.
>
>
I think I know how you should proceed (not exactly how to implement it,
:)).

In order to solve you could have two options: first only guessing, second
the good (but hard) solutions.

- Use minitools instead of scripts, and test the two modes to operate (1,
preparing the SD card with the fused superboot.bin and an script stsatin
Usb-mode = yes, 2 boot from nand while pressing K1 button (this will
automatically activate USB mode)). This way you can launch a binary and
maybe (just maybe) the nand won't get locked.
Remember to use a good quality mini-usb cables, If you have problems
detecting the board, messages like "data not accepted by the board", it is
due to bad quality wires.

- You have to fuse the bootloader into the SD card or the nand, process
similar to the one used to get uboot working in our boards (there are
boards in china with uboot working with 2451, and there is some
documentation from samsung (I can provide it to you if you want).

If first stage bootloader lock nand in any situation, there is no other
solution than using the SD fused bootloader option.

Guillermo


Carlos



-- 



On 3 December 2014 at 12:24, Guillermo Rodriguez Garcia <
guille.rodriguez@gmail.com> wrote:

> 2014-12-03 11:58 GMT+01:00 Carlos Leyva Guerrero <carlos.leyva@idener.es>:
> > Buenas Guillermo,
> >
> > - I used OSELAS arm-v5te pre-build toolchain (ubuntu repositories).
> > - I got two working kernels (one using friendly arm 4.4.3 toolchain and
> the
> > other with the CodeSourcery 2009q3).
> > - With those two kernels, I also got a fully working rootfs (burned into
> > nand using superboot) and i get the system up & ready, but:
>
> I am curious about this, superboot expects a yaffs2 image, which IIRC
> requires kernel patches and is not supported out of the box by
> ptxdist. Did you use yaffs2, or did you manage to get superboot to
> install a jffs2 or ubi image ?
>
> >     - with FA - I cannot compile udev, the used glibc version for such
> > toolchain seems lower than 2.10, so I get errors compiling udev
> ('accept4'
> > related).
> >     - with CS 2009q3 - everything alright but, the specific version of
> > binutils used for compiling the toolchain is not publicly available (I
> > suppose it was a custom build from CodeSourcery) so I cannot use the
> exact
> > same binutil version (not a big problem but..)
> >     - with the prebuild arm5vte oselas version, after burning to the
> board,
> > the kernel get extracted and then .. no output, system hang.
>
> What is the last thing you see in the console?
>
> > - I also used kernel from FA as source, but some modifications were done,
> > i.e (remove initramfs, removed cpio file, ...)
>
> Note that I did not use the kernel from FA. I used a standard 3.7
> kernel with the ptxdist patches, and just adapted the mach-mini2451
> file from FA.
>
> >
> > - I am currently testing the system with newer CodeSourcery version
> > (2013.11-33), but i have the same 'problem', custom binutils build.
> >
> >
> > You mentioned that you built a customized arm-v5te toolchain (well you
> don
> > exactly say so, but given I got no good results with the default
> > configuration, I will suppose that), Did you add/remove any specific FLAG
> > for the toolchain compilation (besides mtune)?
>
> I built my own but did not need any customizations. Started from
> OSELAS.Toolchain-2012.12.1 (same as is used in the last published
> mini2440 BSP), then just did:
>
> ptxdist clean
> rm selected_ptxconfig
> ptxdist select ptxconfigs/arm-v5te-linux-gnueabi
> ptxdist go
>
> With the resulting toolchain I am able to build userland binaries and
> also a kernel using ptxdist. For this I created a new "platformconfig"
> based on platform-friendlyarm-mini2440. In my first tests I just
> modified the platform name (as ptxdist places all output files in
> platform-${platformname}) and selected the new Toolchain. I did not
> touch any other architecture specific flags such as hardware floating
> point support and so on -- I wanted to do a basic test first (which
> worked fine)
>
> >
> > Regarding the barebox, I am pretty interested. I was planning also to
> try it
> > but I have no more available hours in the day, ;). Please keep me up with
> > you progress and let me know if you need anything.
>
> I got it to the point where barebox is booting as a 2nd stage
> bootloader, does low level PLL and SDRAM configuration, and has
> working support for timers, serial ports, and Ethernet. Next on the
> list was NAND support but then I found that when you use superboot to
> run a "user binary" (with Action=Run instead of Action=Install) it
> locks the NAND in a way that cannot be unlocked by software. So I need
> to find a way around superboot in order to continue testing this.
>
> Guillermo
>

[-- Attachment #1.2: Type: text/html, Size: 13433 bytes --]

[-- Attachment #2: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] Compilation for ARM926ej-s --> S3c2451

[Guillermo Rodriguez Garcia]

[-- Attachment #1.1: Type: text/plain, Size: 6954 bytes --]

2014-12-03 17:01 GMT+01:00 Carlos Leyva Guerrero <carlos.leyva@idener.es>:

> On 3 December 2014 at 12:24, Guillermo Rodriguez Garcia <
> guille.rodriguez@gmail.com> wrote:
>
>> 2014-12-03 11:58 GMT+01:00 Carlos Leyva Guerrero <carlos.leyva@idener.es
>> >:
>> > Buenas Guillermo,
>> >
>> > - I used OSELAS arm-v5te pre-build toolchain (ubuntu repositories).
>> > - I got two working kernels (one using friendly arm 4.4.3 toolchain and
>> the
>> > other with the CodeSourcery 2009q3).
>> > - With those two kernels, I also got a fully working rootfs (burned into
>> > nand using superboot) and i get the system up & ready, but:
>>
>> I am curious about this, superboot expects a yaffs2 image, which IIRC
>> requires kernel patches and is not supported out of the box by
>> ptxdist. Did you use yaffs2, or did you manage to get superboot to
>> install a jffs2 or ubi image ?
>>
>
> I examined the modifications that FA performed to the 3.6 kernel and
> create a diff patch, then started from a basic 3.6 clean kernel, add the
> patch (there are some modifications on nand hadling an HW ECC, platform
> definition, etc.).
>

For what it's worth I was in contact with someone who was also using Linux
(I think it was 3.9 in this case) on a Mini2451 derivative and they
confirmed that none of the modifications in the FA kernel are actually
necessary (I explicitly asked about the ECC stuff in the NAND driver).


> I also included support for yaffs2 (which is not my goal, but while we
> have a working barebox allowing burning ubi fs....)
>
>
>>
>> >     - with FA - I cannot compile udev, the used glibc version for such
>> > toolchain seems lower than 2.10, so I get errors compiling udev
>> ('accept4'
>> > related).
>> >     - with CS 2009q3 - everything alright but, the specific version of
>> > binutils used for compiling the toolchain is not publicly available (I
>> > suppose it was a custom build from CodeSourcery) so I cannot use the
>> exact
>> > same binutil version (not a big problem but..)
>> >     - with the prebuild arm5vte oselas version, after burning to the
>> board,
>> > the kernel get extracted and then .. no output, system hang.
>>
>> What is the last thing you see in the console?
>>
>
> The common (not remember exactly) "Decompressing Linux Kernel Image . . .
> " (Same message appears with mmy other compilations, only difference is
> that now it hangs there)
>
>
>>
>> > - I also used kernel from FA as source, but some modifications were
>> done,
>> > i.e (remove initramfs, removed cpio file, ...)
>>
>> Note that I did not use the kernel from FA. I used a standard 3.7
>> kernel with the ptxdist patches, and just adapted the mach-mini2451
>> file from FA.
>>
>>
> Have you tested nand performance, HW ecc?
>

Not yet due to the issue described earlier -- I am initially mounting the
rootfs over NFS because superboot wouldn't let me flash a jffs2 image.


>
> If I provide you the patch and config file I did for the kernel 3.6, would
> you mind testing if you are able to compile and boot with it?
>

Sure, I can do that, but it will probably be 2-3 weeks before I can try it.
I have some high priority stuff to take care off before that (this is also
why I had to put my ongoing work on barebox in standby).

I can also send you my kernelconfig and platformconfig files if you think
this would be helpful.


>
>
>> >
>> > - I am currently testing the system with newer CodeSourcery version
>> > (2013.11-33), but i have the same 'problem', custom binutils build.
>> >
>> >
>> > You mentioned that you built a customized arm-v5te toolchain (well you
>> don
>> > exactly say so, but given I got no good results with the default
>> > configuration, I will suppose that), Did you add/remove any specific
>> FLAG
>> > for the toolchain compilation (besides mtune)?
>>
>> I built my own but did not need any customizations. Started from
>> OSELAS.Toolchain-2012.12.1 (same as is used in the last published
>> mini2440 BSP), then just did:
>>
>> ptxdist clean
>> rm selected_ptxconfig
>> ptxdist select ptxconfigs/arm-v5te-linux-gnueabi
>> ptxdist go
>>
>
> Did that, but didn't work with my kernel, strange thing.
>
>
>>
>> With the resulting toolchain I am able to build userland binaries and
>> also a kernel using ptxdist. For this I created a new "platformconfig"
>> based on platform-friendlyarm-mini2440. In my first tests I just
>> modified the platform name (as ptxdist places all output files in
>> platform-${platformname}) and selected the new Toolchain. I did not
>> touch any other architecture specific flags such as hardware floating
>> point support and so on -- I wanted to do a basic test first (which
>> worked fine)
>>
>> >
>> > Regarding the barebox, I am pretty interested. I was planning also to
>> try it
>> > but I have no more available hours in the day, ;). Please keep me up
>> with
>> > you progress and let me know if you need anything.
>>
>> I got it to the point where barebox is booting as a 2nd stage
>> bootloader, does low level PLL and SDRAM configuration, and has
>> working support for timers, serial ports, and Ethernet. Next on the
>> list was NAND support but then I found that when you use superboot to
>> run a "user binary" (with Action=Run instead of Action=Install) it
>> locks the NAND in a way that cannot be unlocked by software. So I need
>> to find a way around superboot in order to continue testing this.
>>
>>
> I think I know how you should proceed (not exactly how to implement it,
> :)).
>
> In order to solve you could have two options: first only guessing, second
> the good (but hard) solutions.
>
> - Use minitools instead of scripts, and test the two modes to operate (1,
> preparing the SD card with the fused superboot.bin and an script stsatin
> Usb-mode = yes, 2 boot from nand while pressing K1 button (this will
> automatically activate USB mode)). This way you can launch a binary and
> maybe (just maybe) the nand won't get locked.
>

I will try this but I dont't think this will work. The NAND locking is not
accidental -- it is done explicitly by superboot through the "tight lock"
bit in the S3C2451 NAND controller. So I expect they would also do the same
in USB mode.


> Remember to use a good quality mini-usb cables, If you have problems
> detecting the board, messages like "data not accepted by the board", it is
> due to bad quality wires.
>
> - You have to fuse the bootloader into the SD card or the nand, process
> similar to the one used to get uboot working in our boards (there are
> boards in china with uboot working with 2451, and there is some
> documentation from samsung (I can provide it to you if you want).
>
> If first stage bootloader lock nand in any situation, there is no other
> solution than using the SD fused bootloader option.
>

Yes. This one will work for sure. Actually I am waiting for some boards
with u-boot preloaded, this will help me proceed without worrying about
superboot for the time being :)

Guillermo

[-- Attachment #1.2: Type: text/html, Size: 11146 bytes --]

[-- Attachment #2: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] Compilation for ARM926ej-s --> S3c2451

[Carlos Leyva Guerrero]

[-- Attachment #1.1: Type: text/plain, Size: 8071 bytes --]

On 3 December 2014 at 17:47, Guillermo Rodriguez Garcia <
guille.rodriguez@gmail.com> wrote:

> 2014-12-03 17:01 GMT+01:00 Carlos Leyva Guerrero <carlos.leyva@idener.es>:
>
>> On 3 December 2014 at 12:24, Guillermo Rodriguez Garcia <
>> guille.rodriguez@gmail.com> wrote:
>>
>>> 2014-12-03 11:58 GMT+01:00 Carlos Leyva Guerrero <carlos.leyva@idener.es
>>> >:
>>> > Buenas Guillermo,
>>> >
>>> > - I used OSELAS arm-v5te pre-build toolchain (ubuntu repositories).
>>> > - I got two working kernels (one using friendly arm 4.4.3 toolchain
>>> and the
>>> > other with the CodeSourcery 2009q3).
>>> > - With those two kernels, I also got a fully working rootfs (burned
>>> into
>>> > nand using superboot) and i get the system up & ready, but:
>>>
>>> I am curious about this, superboot expects a yaffs2 image, which IIRC
>>> requires kernel patches and is not supported out of the box by
>>> ptxdist. Did you use yaffs2, or did you manage to get superboot to
>>> install a jffs2 or ubi image ?
>>>
>>
>> I examined the modifications that FA performed to the 3.6 kernel and
>> create a diff patch, then started from a basic 3.6 clean kernel, add the
>> patch (there are some modifications on nand hadling an HW ECC, platform
>> definition, etc.).
>>
>
> For what it's worth I was in contact with someone who was also using Linux
> (I think it was 3.9 in this case) on a Mini2451 derivative and they
> confirmed that none of the modifications in the FA kernel are actually
> necessary (I explicitly asked about the ECC stuff in the NAND driver).
>

Mmm ,interesting thing, I will try to check if everything is ok with
further kernels (i.e. 3.14) and will share the output.

>
>
>> I also included support for yaffs2 (which is not my goal, but while we
>> have a working barebox allowing burning ubi fs....)
>>
>>
>>>
>>> >     - with FA - I cannot compile udev, the used glibc version for such
>>> > toolchain seems lower than 2.10, so I get errors compiling udev
>>> ('accept4'
>>> > related).
>>> >     - with CS 2009q3 - everything alright but, the specific version of
>>> > binutils used for compiling the toolchain is not publicly available (I
>>> > suppose it was a custom build from CodeSourcery) so I cannot use the
>>> exact
>>> > same binutil version (not a big problem but..)
>>> >     - with the prebuild arm5vte oselas version, after burning to the
>>> board,
>>> > the kernel get extracted and then .. no output, system hang.
>>>
>>> What is the last thing you see in the console?
>>>
>>
>> The common (not remember exactly) "Decompressing Linux Kernel Image . . .
>> " (Same message appears with mmy other compilations, only difference is
>> that now it hangs there)
>>
>>
>>>
>>> > - I also used kernel from FA as source, but some modifications were
>>> done,
>>> > i.e (remove initramfs, removed cpio file, ...)
>>>
>>> Note that I did not use the kernel from FA. I used a standard 3.7
>>> kernel with the ptxdist patches, and just adapted the mach-mini2451
>>> file from FA.
>>>
>>>
>> Have you tested nand performance, HW ecc?
>>
>
> Not yet due to the issue described earlier -- I am initially mounting the
> rootfs over NFS because superboot wouldn't let me flash a jffs2 image.
>
>
>>
>> If I provide you the patch and config file I did for the kernel 3.6,
>> would you mind testing if you are able to compile and boot with it?
>>
>
> Sure, I can do that, but it will probably be 2-3 weeks before I can try
> it. I have some high priority stuff to take care off before that (this is
> also why I had to put my ongoing work on barebox in standby).
>
> I can also send you my kernelconfig and platformconfig files if you think
> this would be helpful.
>

Please send them so I can run some additional checks, see diferences in
kernels that could explain the non-booting issue.

>
>
>>
>>
>>> >
>>> > - I am currently testing the system with newer CodeSourcery version
>>> > (2013.11-33), but i have the same 'problem', custom binutils build.
>>> >
>>> >
>>> > You mentioned that you built a customized arm-v5te toolchain (well you
>>> don
>>> > exactly say so, but given I got no good results with the default
>>> > configuration, I will suppose that), Did you add/remove any specific
>>> FLAG
>>> > for the toolchain compilation (besides mtune)?
>>>
>>> I built my own but did not need any customizations. Started from
>>> OSELAS.Toolchain-2012.12.1 (same as is used in the last published
>>> mini2440 BSP), then just did:
>>>
>>> ptxdist clean
>>> rm selected_ptxconfig
>>> ptxdist select ptxconfigs/arm-v5te-linux-gnueabi
>>> ptxdist go
>>>
>>
>> Did that, but didn't work with my kernel, strange thing.
>>
>>
>>>
>>> With the resulting toolchain I am able to build userland binaries and
>>> also a kernel using ptxdist. For this I created a new "platformconfig"
>>> based on platform-friendlyarm-mini2440. In my first tests I just
>>> modified the platform name (as ptxdist places all output files in
>>> platform-${platformname}) and selected the new Toolchain. I did not
>>> touch any other architecture specific flags such as hardware floating
>>> point support and so on -- I wanted to do a basic test first (which
>>> worked fine)
>>>
>>> >
>>> > Regarding the barebox, I am pretty interested. I was planning also to
>>> try it
>>> > but I have no more available hours in the day, ;). Please keep me up
>>> with
>>> > you progress and let me know if you need anything.
>>>
>>> I got it to the point where barebox is booting as a 2nd stage
>>> bootloader, does low level PLL and SDRAM configuration, and has
>>> working support for timers, serial ports, and Ethernet. Next on the
>>> list was NAND support but then I found that when you use superboot to
>>> run a "user binary" (with Action=Run instead of Action=Install) it
>>> locks the NAND in a way that cannot be unlocked by software. So I need
>>> to find a way around superboot in order to continue testing this.
>>>
>>>
>> I think I know how you should proceed (not exactly how to implement it,
>> :)).
>>
>> In order to solve you could have two options: first only guessing, second
>> the good (but hard) solutions.
>>
>> - Use minitools instead of scripts, and test the two modes to operate (1,
>> preparing the SD card with the fused superboot.bin and an script stsatin
>> Usb-mode = yes, 2 boot from nand while pressing K1 button (this will
>> automatically activate USB mode)). This way you can launch a binary and
>> maybe (just maybe) the nand won't get locked.
>>
>
> I will try this but I dont't think this will work. The NAND locking is not
> accidental -- it is done explicitly by superboot through the "tight lock"
> bit in the S3C2451 NAND controller. So I expect they would also do the same
> in USB mode.
>

I am in contact with the original manufacturer of the boards, and I have
talked with them several time about uboot, I will contact them and will ask
if they in fact block the nand in all modes.


>
>
>> Remember to use a good quality mini-usb cables, If you have problems
>> detecting the board, messages like "data not accepted by the board", it is
>> due to bad quality wires.
>>
>> - You have to fuse the bootloader into the SD card or the nand, process
>> similar to the one used to get uboot working in our boards (there are
>> boards in china with uboot working with 2451, and there is some
>> documentation from samsung (I can provide it to you if you want).
>>
>> If first stage bootloader lock nand in any situation, there is no other
>> solution than using the SD fused bootloader option.
>>
>
> Yes. This one will work for sure. Actually I am waiting for some boards
> with u-boot preloaded, this will help me proceed without worrying about
> superboot for the time being :)
>

This statement is the most surprising!. Pre-loaded uboot? can I ask which
provider will serve this boards to you (you can answer by private if you
can't share it openly)? I have identify other providers with same chip
(s3c2451) but different boards and unless USA FA distributor AAH ships the
boards with uboot, I have missed a new distributor!.



> Guillermo
>

Carlos Leyva

[-- Attachment #1.2: Type: text/html, Size: 13423 bytes --]

[-- Attachment #2: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] Compilation for ARM926ej-s --> S3c2451

[Guillermo Rodriguez Garcia]

2014-12-03 18:00 GMT+01:00 Carlos Leyva Guerrero <carlos.leyva@idener.es>:
[...]
>>> If I provide you the patch and config file I did for the kernel 3.6,
>>> would you mind testing if you are able to compile and boot with it?
>>
>>
>> Sure, I can do that, but it will probably be 2-3 weeks before I can try
>> it. I have some high priority stuff to take care off before that (this is
>> also why I had to put my ongoing work on barebox in standby).
>>
>> I can also send you my kernelconfig and platformconfig files if you think
>> this would be helpful.
>
> Please send them so I can run some additional checks, see diferences in
> kernels that could explain the non-booting issue.

Let me dig these (I want to make sure to send the correct files) and I
will send them to you.

[...]
>> I will try this but I dont't think this will work. The NAND locking is not
>> accidental -- it is done explicitly by superboot through the "tight lock"
>> bit in the S3C2451 NAND controller. So I expect they would also do the same
>> in USB mode.
>
>
> I am in contact with the original manufacturer of the boards, and I have
> talked with them several time about uboot, I will contact them and will ask
> if they in fact block the nand in all modes.

Please let me know if you get any feedback on this.

>>> Remember to use a good quality mini-usb cables, If you have problems
>>> detecting the board, messages like "data not accepted by the board", it is
>>> due to bad quality wires.
>>>
>>> - You have to fuse the bootloader into the SD card or the nand, process
>>> similar to the one used to get uboot working in our boards (there are boards
>>> in china with uboot working with 2451, and there is some documentation from
>>> samsung (I can provide it to you if you want).
>>>
>>> If first stage bootloader lock nand in any situation, there is no other
>>> solution than using the SD fused bootloader option.
>>
>>
>> Yes. This one will work for sure. Actually I am waiting for some boards
>> with u-boot preloaded, this will help me proceed without worrying about
>> superboot for the time being :)
>
>
> This statement is the most surprising!. Pre-loaded uboot? can I ask which
> provider will serve this boards to you (you can answer by private if you
> can't share it openly)? I have identify other providers with same chip
> (s3c2451) but different boards and unless USA FA distributor AAH ships the
> boards with uboot, I have missed a new distributor!.

Maybe I was too fast in my reply. The boards I am getting (from
Boardcon) are not actually based on the s3c2451; they are based on the
s3c2416 instead. However these are very similar (they even use the
same chip ID) except for some extra onboard peripherals in the
S3C2451.

http://armbest.com/Tiny2451_CPU%20Compare.html

Guillermo

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] Compilation for ARM926ej-s --> S3c2451

[Guillermo Rodriguez Garcia]

[-- Attachment #1: Type: text/plain, Size: 835 bytes --]

Hi Carlos,

2014-12-04 10:02 GMT+01:00 Guillermo Rodriguez Garcia
<guille.rodriguez@gmail.com>:
>>> I can also send you my kernelconfig and platformconfig files if you think
>>> this would be helpful.
>>
>> Please send them so I can run some additional checks, see diferences in
>> kernels that could explain the non-booting issue.
>
> Let me dig these (I want to make sure to send the correct files) and I
> will send them to you.

Please find the files attached, I could not test them thoroughly but I
did not want to delay it any further.

I am attaching the platformconfig and kernelconfig files, along with a
zip with the few files I modified in the kernel's mach-s3c24xx folder.

This is all WIP but boots and works fine over here.

Let me know if this works for you.

Guillermo
--
Guillermo Rodriguez
guille.rodriguez@gmail.com

[-- Attachment #2: kernelconfig-3.7 --]
[-- Type: application/octet-stream, Size: 55834 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.7.0 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FIQ=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_NEED_MACH_GPIO_H=y
CONFIG_NEED_MACH_IO_H=y
CONFIG_PHYS_OFFSET=0x30000000
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="Mini2440"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_KTIME_SCALAR=y
CONFIG_ARCH_USES_GETTIMEOFFSET=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TINY_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_HAVE_UID16=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_GENERIC_KERNEL_THREAD=y
CONFIG_GENERIC_KERNEL_EXECVE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_FREEZER is not set

#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_MULTIPLATFORM is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM2835 is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
CONFIG_ARCH_S3C24XX=y
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VT8500 is not set
# CONFIG_ARCH_ZYNQ is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
CONFIG_PLAT_SAMSUNG=y

#
# Boot options
#
# CONFIG_S3C_BOOT_WATCHDOG is not set
# CONFIG_S3C_BOOT_ERROR_RESET is not set
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_SAMSUNG_CLOCK=y
CONFIG_SAMSUNG_CLKSRC=y
# CONFIG_S5P_CLOCK is not set
# CONFIG_S5P_IRQ is not set
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_ADC=y
CONFIG_S3C_DEV_WDT=y
CONFIG_S3C_DEV_NAND=y
CONFIG_SAMSUNG_DEV_PWM=y
CONFIG_S3C24XX_PWM=y
CONFIG_S3C_DMA=y

#
# Power management
#
CONFIG_DEBUG_S3C_UART=0
CONFIG_PLAT_S3C24XX=y
CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
CONFIG_CPU_LLSERIAL_S3C2440=y
CONFIG_S3C24XX_GPIO_EXTRA=0
CONFIG_S3C24XX_DMA=y

#
# SAMSUNG S3C24XX SoCs Support
#

#
# S3C24XX SoCs
#
# CONFIG_CPU_S3C2410 is not set
# CONFIG_CPU_S3C2412 is not set
CONFIG_CPU_S3C2416=y
# CONFIG_CPU_S3C2440 is not set
# CONFIG_CPU_S3C2442 is not set
# CONFIG_CPU_S3C2443 is not set

#
# S3C2416 Boards
#
CONFIG_MACH_MINI2451=y
# CONFIG_MACH_SMDK2416 is not set
CONFIG_S3C2443_COMMON=y
CONFIG_S3C2443_DMA=y

#
# Processor Type
#
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_USE_DOMAINS=y

#
# Processor Features
#
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_NR_BANKS=8

#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_NR_GPIO=0
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ=200
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set

#
# Boot options
#
# CONFIG_USE_OF is not set
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_AUTO_ZRELADDR is not set

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# ARM CPU frequency scaling drivers
#
# CONFIG_ARM_S3C2416_CPUFREQ is not set
# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
# CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set
# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
CONFIG_CPU_FREQ_S3C=y
CONFIG_CPU_FREQ_S3C24XX=y
# CONFIG_CPU_FREQ_S3C24XX_PLL is not set
# CONFIG_CPU_FREQ_S3C24XX_DEBUG is not set
# CONFIG_CPU_FREQ_S3C24XX_IODEBUG is not set
CONFIG_CPU_FREQ_S3C24XX_DEBUGFS=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
# CONFIG_FPE_NWFPE is not set
CONFIG_FPE_FASTFPE=y
# CONFIG_VFP is not set

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y

#
# Power management options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ARM_CPU_SUSPEND is not set
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_DMA_SHARED_BUFFER is not set
# CONFIG_CMA is not set

#
# Bus devices
#
# CONFIG_OMAP_OCP2SCP is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
CONFIG_MTD_NAND_MUSEUM_IDS=y
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
CONFIG_MTD_NAND_S3C2410_HWECC=y
CONFIG_MTD_NAND_S3C2410_CLKSTOP=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
CONFIG_MII=y
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set

#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
CONFIG_DM9000=y
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
CONFIG_TOUCHSCREEN_S3C2410=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set

#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
CONFIG_HAVE_S3C2410_I2C=y
CONFIG_I2C_S3C2410=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_S3C24XX=y
CONFIG_SPI_S3C24XX_FIQ=y
# CONFIG_SPI_S3C64XX is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_EM is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_S3C=y
CONFIG_SENSORS_S3C_RAW=y
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_HAVE_S3C2410_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_S3C2410=y
# CONFIG_FB_S3C2410_DEBUG is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_ARCH_HAS_XHCI is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_RENESAS_USBHS is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set

#
# USB Physical Layer drivers
#
# CONFIG_OMAP_USB2 is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_R8A66597 is not set
CONFIG_USB_S3C2410=m
# CONFIG_USB_S3C2410_DEBUG is not set
# CONFIG_USB_S3C_HSUDC is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FUNCTIONFS=m
# CONFIG_USB_FUNCTIONFS_ETH is not set
# CONFIG_USB_FUNCTIONFS_RNDIS is not set
CONFIG_USB_FUNCTIONFS_GENERIC=y
# CONFIG_USB_FILE_STORAGE is not set
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
CONFIG_USB_G_HID=m
# CONFIG_USB_G_DBGP is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ULPI is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_SPI is not set
CONFIG_MMC_S3C=y
CONFIG_MMC_S3C_HW_SDIO_IRQ=y
# CONFIG_MMC_S3C_PIO is not set
# CONFIG_MMC_S3C_DMA is not set
CONFIG_MMC_S3C_PIODMA=y
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_S3C24XX=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_RENESAS_TPU is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set

#
# on-CPU RTC drivers
#
CONFIG_HAVE_S3C_RTC=y
CONFIG_RTC_DRV_S3C=y
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_DW_DMAC is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y

#
# Hardware Spinlock drivers
#
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers (EXPERIMENTAL)
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_PWM=y
CONFIG_PWM_SAMSUNG=y

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_SWAP is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp850"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_PROVE_RCU_DELAY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_S3C_UART0=y
# CONFIG_DEBUG_S3C_UART1 is not set
# CONFIG_DEBUG_S3C_UART2 is not set
# CONFIG_DEBUG_LL_UART_NONE is not set
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_SEMIHOSTING is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_EARLY_PRINTK=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set

[-- Attachment #3: platformconfig --]
[-- Type: application/octet-stream, Size: 6231 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# PTXdist 2013.09.0
#
PTXCONF_PLATFORMCONFIG_VERSION="2013.09.0"
PTXCONF_RUNTIME=y
PTXCONF_BUILDTIME=y
PTXCONF__platformconfig_MAGIC__=y

#
# ------------------------------------
#

#
# Target Platform Configuration 
#

#
# ------------------------------------
#
PTXCONF_PLATFORM="mini2451"
PTXCONF_PLATFORM_VERSION="-2013.10.0"

#
# architecture                  
#
# PTXCONF_ARCH_ALPHA is not set
# PTXCONF_ARCH_AVR32 is not set
# PTXCONF_ARCH_AVR is not set
PTXCONF_ARCH_ARM=y
# PTXCONF_ARCH_BLACKFIN is not set
# PTXCONF_ARCH_X86 is not set
# PTXCONF_ARCH_MINGW is not set
# PTXCONF_ARCH_PPC is not set
# PTXCONF_ARCH_M68K is not set
# PTXCONF_ARCH_SPARC is not set
# PTXCONF_ARCH_MICROBLAZE is not set
# PTXCONF_ARCH_MIPS is not set
# PTXCONF_ARCH_CRIS is not set
# PTXCONF_ARCH_PARISC is not set
# PTXCONF_ARCH_SH is not set
PTXCONF_ARCH_SUPPORTS_ENDIAN_BIG=y
PTXCONF_ARCH_SUPPORTS_ENDIAN_LITTLE=y
# PTXCONF_ENDIAN_BIG is not set
PTXCONF_ENDIAN_LITTLE=y
# PTXCONF_ARCH_ARM_V6 is not set
# PTXCONF_ARCH_ARM_IWMMXT is not set
# PTXCONF_ARCH_ARM_NEON is not set
# PTXCONF_HAS_HARDFLOAT is not set
PTXCONF_HAS_MMU=y
PTXCONF_SIZEOF_LONG_DOUBLE="8"
PTXCONF_ARCH_STRING="arm"

#
# paths & directories           
#
PTXCONF_SYSROOT_TARGET="${PTXDIST_PLATFORMDIR}/sysroot-target"
PTXCONF_SYSROOT_HOST="${PTXDIST_PLATFORMDIR}/sysroot-host"
PTXCONF_SYSROOT_CROSS="${PTXDIST_PLATFORMDIR}/sysroot-cross"

#
# toolchain                     
#
PTXCONF_CROSSCHAIN_VENDOR="OSELAS.Toolchain-2012.12"
PTXCONF_CROSSCHAIN_CHECK="4.7.2"
PTXCONF_LIBC_GLIBC=y
# PTXCONF_LIBC_UCLIBC is not set
PTXCONF_GLIBC_VERSION="2.16.0"
PTXCONF_GNU_TARGET="arm-v5te-linux-gnueabi"
PTXCONF_COMPILER_PREFIX="${PTXCONF_GNU_TARGET}-"
PTXCONF_COMPILER_PREFIX_KERNEL="${PTXCONF_COMPILER_PREFIX}"
PTXCONF_COMPILER_PREFIX_BOOTLOADER="${PTXCONF_COMPILER_PREFIX}"

#
# hardening options             
#
# PTXCONF_TARGET_HARDEN_STACK is not set
# PTXCONF_TARGET_HARDEN_FORTIFY is not set
# PTXCONF_TARGET_HARDEN_RELRO is not set
# PTXCONF_TARGET_HARDEN_BINDNOW is not set
# PTXCONF_TARGET_HARDEN_PIE is not set

#
# extra toolchain options       
#
# PTXCONF_TARGET_LINKER_HASH_DEFAULT is not set
# PTXCONF_TARGET_LINKER_HASH_SYSV is not set
PTXCONF_TARGET_LINKER_HASH_GNU=y
# PTXCONF_TARGET_LINKER_HASH_BOTH is not set
PTXCONF_TARGET_LINKER_AS_NEEDED=y
PTXCONF_TARGET_EXTRA_CPPFLAGS=""
PTXCONF_TARGET_EXTRA_CFLAGS=""
PTXCONF_TARGET_EXTRA_CXXFLAGS=""
PTXCONF_TARGET_EXTRA_LDFLAGS=""
PTXCONF_KERNEL=y
# PTXCONF_KERNEL_INSTALL is not set
PTXCONF_KERNEL_MODULES=y
PTXCONF_KERNEL_MODULES_INSTALL=y
PTXCONF_KERNEL_MODULES_BUILD="modules"
PTXCONF_KERNEL_VERSION="3.7"
PTXCONF_KERNEL_MD5="21223369d682bcf44bcdfe1521095983"
PTXCONF_KERNEL_ARCH_STRING="arm"
# PTXCONF_KERNEL_IMAGE_BZ is not set
# PTXCONF_KERNEL_IMAGE_Z is not set
# PTXCONF_KERNEL_IMAGE_XIP is not set
PTXCONF_KERNEL_IMAGE_U=y
# PTXCONF_KERNEL_IMAGE_VM is not set
# PTXCONF_KERNEL_IMAGE_VMLINUX is not set
# PTXCONF_KERNEL_IMAGE_RAW is not set
# PTXCONF_KERNEL_IMAGE_SIMPLE is not set
PTXCONF_KERNEL_IMAGE="uImage"
# PTXCONF_KERNEL_XZ is not set
# PTXCONF_KERNEL_LZOP is not set

#
# patching & configuration      
#
PTXCONF_KERNEL_SERIES="series"
PTXCONF_KERNEL_CONFIG="kernelconfig-${PTXCONF_KERNEL_VERSION}"

#
# Development features
#
PTXCONF_KERNEL_EXTRA_MAKEVARS=""
# PTXCONF_HOST_DTC is not set
# PTXCONF_DTC is not set

#
# console options               
#
PTXCONF_CONSOLE_NAME="ttySAC0"
PTXCONF_CONSOLE_SPEED="115200"

#
# extra kernel                  
#

#
# bootloaders                   
#
# PTXCONF_AT91BOOTSTRAP is not set
# PTXCONF_AT91BOOTSTRAP2 is not set
PTXCONF_BAREBOX_ARCH_STRING="arm"
PTXCONF_BAREBOX=y
PTXCONF_BAREBOX_VERSION="2011.05.0"
PTXCONF_BAREBOX_MD5="d66774abcf9fa6c9530e13543cc707bc"
PTXCONF_BAREBOX_CONFIG="barebox.config"
# PTXCONF_BAREBOX_EXTRA_ENV is not set
# PTXCONF_BAREBOX_BAREBOXENV is not set
# PTXCONF_BAREBOX_MLO is not set
PTXCONF_BOOTLOADER=y
# PTXCONF_GRUB is not set
# PTXCONF_HOST_MXS_UTILS is not set
# PTXCONF_U_BOOT_V2 is not set
# PTXCONF_U_BOOT is not set
# PTXCONF_X_LOAD is not set

#
# flash                         
#
PTXCONF_FLASH_BLOCKSIZE="128k"

#
# image creation options        
#
# PTXCONF_IMAGE_BOOT_MLO_VFAT is not set
# PTXCONF_IMAGE_CPIO is not set
# PTXCONF_IMAGE_CPIO_GZ is not set
# PTXCONF_IMAGE_EXT2 is not set
# PTXCONF_IMAGE_HD is not set
# PTXCONF_IMAGE_VDI is not set

#
# ipkg options                  
#
# PTXCONF_IMAGE_IPKG_PUSH_TO_REPOSITORY is not set
# PTXCONF_IMAGE_INSTALL_FROM_IPKG_REPOSITORY is not set
PTXCONF_IMAGE_IPKG_INDEX=y
PTXCONF_IMAGE_IPKG_EXTRA_ARGS=""
PTXCONF_IMAGE_JFFS2=y
PTXCONF_IMAGE_JFFS2_BLOCKSIZE=0x20000

#
# *** add '-n' here for NAND flash ***
#
PTXCONF_IMAGE_JFFS2_EXTRA_ARGS="-n"
PTXCONF_IMAGE_JFFS2_SUM=y
PTXCONF_IMAGE_JFFS2_SUM_EXTRA_ARGS="-n"
PTXCONF_IMAGE_KERNEL=y
# PTXCONF_IMAGE_KERNEL_INITRAMFS is not set
PTXCONF_IMAGE_KERNEL_INSTALL_EARLY=y
# PTXCONF_IMAGE_KERNEL_LZOP is not set
# PTXCONF_IMAGE_SQUASHFS is not set
PTXCONF_IMAGE_TGZ=y
# PTXCONF_IMAGE_UBI is not set
# PTXCONF_IMAGE_UBIFS is not set
# PTXCONF_IMAGE_UIMAGE is not set

#
# new image creation options    
#
# PTXCONF_IMAGE_BOOT_MLO is not set
# PTXCONF_IMAGE_ROOT_CPIO_GZ is not set
# PTXCONF_IMAGE_ROOT_CPIO is not set
# PTXCONF_IMAGE_ROOT_EXT is not set
# PTXCONF_IMAGE_ROOT_TGZ is not set
# PTXCONF_HOST_BZIP2 is not set
# PTXCONF_HOST_CDRKIT is not set
# PTXCONF_HOST_CMAKE is not set
# PTXCONF_HOST_CRAMFS is not set
# PTXCONF_HOST_DOSFSTOOLS is not set
# PTXCONF_HOST_E2FSPROGS is not set
# PTXCONF_HOST_GENEXT2FS is not set
# PTXCONF_HOST_GENIMAGE is not set
# PTXCONF_HOST_GENPART is not set
# PTXCONF_HOST_GETTEXT is not set
# PTXCONF_HOST_LIBBLKID is not set
# PTXCONF_HOST_LIBCAP is not set
# PTXCONF_HOST_LIBCONFUSE is not set
# PTXCONF_HOST_LIBICONV is not set
PTXCONF_HOST_LIBKMOD=y
PTXCONF_HOST_LIBLZO=y
PTXCONF_HOST_LIBUUID=y
# PTXCONF_HOST_LZOP is not set
# PTXCONF_HOST_MKELFIMAGE is not set
PTXCONF_HOST_MTD_UTILS=y
# PTXCONF_HOST_MTOOLS is not set
# PTXCONF_HOST_OPENSSL is not set
# PTXCONF_HOST_SQUASHFS_TOOLS is not set
PTXCONF_HOST_U_BOOT_TOOLS=y
PTXCONF_HOST_UTIL_LINUX_NG=y
# PTXCONF_HOST_XL_TOOLS is not set
# PTXCONF_HOST_XZ is not set
PTXCONF_HOST_ZLIB=y

[-- Attachment #4: mach-s3c24xx.zip --]
[-- Type: application/zip, Size: 10218 bytes --]

[-- Attachment #5: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] Compilation for ARM926ej-s --> S3c2451

[Guillermo Rodriguez Garcia]

[-- Attachment #1.1: Type: text/plain, Size: 943 bytes --]

Hi Carlos,

2014-12-05 17:46 GMT+01:00 Guillermo Rodriguez Garcia <
guille.rodriguez@gmail.com>:
>
> Hi Carlos,
>
> 2014-12-04 10:02 GMT+01:00 Guillermo Rodriguez Garcia
> <guille.rodriguez@gmail.com>:
> >>> I can also send you my kernelconfig and platformconfig files if you
> think
> >>> this would be helpful.
> >>
> >> Please send them so I can run some additional checks, see diferences in
> >> kernels that could explain the non-booting issue.
> >
> > Let me dig these (I want to make sure to send the correct files) and I
> > will send them to you.
>
> Please find the files attached, I could not test them thoroughly but I
> did not want to delay it any further.
>
> I am attaching the platformconfig and kernelconfig files, along with a
> zip with the few files I modified in the kernel's mach-s3c24xx folder.
>
> This is all WIP but boots and works fine over here.
>
> Let me know if this works for you.
>

Did this help?

Guillermo

[-- Attachment #1.2: Type: text/html, Size: 1486 bytes --]

[-- Attachment #2: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] Compilation for ARM926ej-s --> S3c2451

[Carlos Leyva Guerrero]

[-- Attachment #1.1: Type: text/plain, Size: 1523 bytes --]

Hi Guillermo,


I had to delay this. We needed some boards at work (for a product) and much
work had to be done in other areas (application, remote update system, ...)
so I stayed with old CodeSourcery toolchain. I will go back to this for
sure after the holidays (I will try to find some time during Christmas but
it's gonna be difficult).

In any case, thanks for your contribution, I will keep you updated!.

Best regards,

Carlos



-- 



On 18 December 2014 at 19:41, Guillermo Rodriguez Garcia <
guille.rodriguez@gmail.com> wrote:
>
> Hi Carlos,
>
> 2014-12-05 17:46 GMT+01:00 Guillermo Rodriguez Garcia <
> guille.rodriguez@gmail.com>:
>>
>> Hi Carlos,
>>
>> 2014-12-04 10:02 GMT+01:00 Guillermo Rodriguez Garcia
>> <guille.rodriguez@gmail.com>:
>> >>> I can also send you my kernelconfig and platformconfig files if you
>> think
>> >>> this would be helpful.
>> >>
>> >> Please send them so I can run some additional checks, see diferences in
>> >> kernels that could explain the non-booting issue.
>> >
>> > Let me dig these (I want to make sure to send the correct files) and I
>> > will send them to you.
>>
>> Please find the files attached, I could not test them thoroughly but I
>> did not want to delay it any further.
>>
>> I am attaching the platformconfig and kernelconfig files, along with a
>> zip with the few files I modified in the kernel's mach-s3c24xx folder.
>>
>> This is all WIP but boots and works fine over here.
>>
>> Let me know if this works for you.
>>
>
> Did this help?
>
> Guillermo
>

[-- Attachment #1.2: Type: text/html, Size: 2713 bytes --]

[-- Attachment #2: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de