Re: [ptxdist] Compilation for ARM926ej-s --> S3c2451

[Carlos Leyva Guerrero <carlos.leyva@idener.es>]

[-- Attachment #1.1: Type: text/plain, Size: 1523 bytes --]

Hi Guillermo,


I had to delay this. We needed some boards at work (for a product) and much
work had to be done in other areas (application, remote update system, ...)
so I stayed with old CodeSourcery toolchain. I will go back to this for
sure after the holidays (I will try to find some time during Christmas but
it's gonna be difficult).

In any case, thanks for your contribution, I will keep you updated!.

Best regards,

Carlos



-- 



On 18 December 2014 at 19:41, Guillermo Rodriguez Garcia <
guille.rodriguez@gmail.com> wrote:
>
> Hi Carlos,
>
> 2014-12-05 17:46 GMT+01:00 Guillermo Rodriguez Garcia <
> guille.rodriguez@gmail.com>:
>>
>> Hi Carlos,
>>
>> 2014-12-04 10:02 GMT+01:00 Guillermo Rodriguez Garcia
>> <guille.rodriguez@gmail.com>:
>> >>> I can also send you my kernelconfig and platformconfig files if you
>> think
>> >>> this would be helpful.
>> >>
>> >> Please send them so I can run some additional checks, see diferences in
>> >> kernels that could explain the non-booting issue.
>> >
>> > Let me dig these (I want to make sure to send the correct files) and I
>> > will send them to you.
>>
>> Please find the files attached, I could not test them thoroughly but I
>> did not want to delay it any further.
>>
>> I am attaching the platformconfig and kernelconfig files, along with a
>> zip with the few files I modified in the kernel's mach-s3c24xx folder.
>>
>> This is all WIP but boots and works fine over here.
>>
>> Let me know if this works for you.
>>
>
> Did this help?
>
> Guillermo
>

[-- Attachment #1.2: Type: text/html, Size: 2713 bytes --]

[-- Attachment #2: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de