From: Jean-Claude Monnin <jc_monnin@emailplus.org>
To: ptxdist@pengutronix.de
Subject: [ptxdist] [PATCH 1/2] busybox: add generic config file for udhcpd
Date: Fri, 8 Nov 2013 11:51:24 +0100 [thread overview]
Message-ID: <B2FBF3B8-1153-425F-AB4E-481252D3AB5B@emailplus.org> (raw)
In-Reply-To: <75A20F57-1DBF-4D40-BBA2-FE8148E1E03A@emailplus.org>
Signed-off-by: Jean-Claude Monnin <jc_monnin@emailplus.org>
---
generic/etc/udhcpd.conf | 115 ++++++++++++++++++++++++++++++++++++++++++++++++
rules/busybox.make | 4 ++
2 files changed, 119 insertions(+)
create mode 100644 generic/etc/udhcpd.conf
diff --git a/generic/etc/udhcpd.conf b/generic/etc/udhcpd.conf
new file mode 100644
index 0000000..eca44c0
--- /dev/null
+++ b/generic/etc/udhcpd.conf
@@ -0,0 +1,115 @@
+# Sample udhcpd configuration file (/etc/udhcpd.conf)
+# Values shown are defaults
+
+# The start and end of the IP lease block
+start 192.168.0.20
+end 192.168.0.254
+
+# The interface that udhcpd will use
+interface eth0
+
+# The maximum number of leases (includes addresses reserved
+# by OFFER's, DECLINE's, and ARP conflicts). Will be corrected
+# if it's bigger than IP lease block, but it ok to make it
+# smaller than lease block.
+#max_leases 254
+
+# The amount of time that an IP will be reserved (leased to nobody)
+# if a DHCP decline message is received (seconds)
+#decline_time 3600
+
+# The amount of time that an IP will be reserved
+# if an ARP conflict occurs (seconds)
+#conflict_time 3600
+
+# How long an offered address is reserved (seconds)
+#offer_time 60
+
+# If client asks for lease below this value, it will be rounded up
+# to this value (seconds)
+#min_lease 60
+
+# The location of the pid file
+#pidfile /var/run/udhcpd.pid
+
+# The location of the leases file
+#lease_file /var/lib/misc/udhcpd.leases
+
+# The time period at which udhcpd will write out leases file.
+# If this is 0, udhcpd will never automatically write leases file.
+# Specified in seconds.
+#auto_time 7200
+
+# Every time udhcpd writes a leases file, the below script will be called
+#notify_file # default: no script
+#notify_file dumpleases # useful for debugging
+
+# The following are bootp specific options
+# next server to use in bootstrap
+#siaddr 192.168.0.22 # default: 0.0.0.0 (none)
+# tftp server name
+#sname zorak # default: none
+# tftp file to download (e.g. kernel image)
+#boot_file /var/nfs_root # default: none
+
+# Static leases map
+#static_lease 00:60:08:11:CE:4E 192.168.0.54
+#static_lease 00:60:08:11:CE:3E 192.168.0.44
+
+# The remainder of options are DHCP options and can be specified with the
+# keyword 'opt' or 'option'. If an option can take multiple items, such
+# as the dns option, they can be listed on the same line, or multiple
+# lines.
+# Examples:
+opt dns 192.168.10.2 192.168.10.10
+option subnet 255.255.255.0
+opt router 192.168.10.2
+opt wins 192.168.10.10
+option dns 129.219.13.81 # appended to above DNS servers for a total of 3
+option domain local
+option lease 864000 # default: 10 days
+option msstaticroutes 10.0.0.0/8 10.127.0.1 # single static route
+option staticroutes 10.0.0.0/8 10.127.0.1, 10.11.12.0/24 10.11.12.1
+# Arbitrary option in hex form:
+option 0x08 01020304 # option 8: "cookie server IP addr: 1.2.3.4"
+
+# Currently supported options (for more info, see options.c):
+#opt lease NUM
+#opt subnet IP
+#opt broadcast IP
+#opt router IP_LIST
+#opt ipttl NUM
+#opt mtu NUM
+#opt hostname STRING # client's hostname
+#opt domain STRING # client's domain suffix
+#opt search STRING_LIST # search domains
+#opt nisdomain STRING
+#opt timezone NUM # (localtime - UTC_time) in seconds. signed
+#opt tftp STRING # tftp server name
+#opt bootfile STRING # tftp file to download (e.g. kernel image)
+#opt bootsize NUM # size of that file
+#opt rootpath STRING # (NFS) path to mount as root fs
+#opt wpad STRING
+#opt serverid IP # default: server's IP
+#opt message STRING # error message (udhcpd sends it on success too)
+#opt vlanid NUM # 802.1P VLAN ID
+#opt vlanpriority NUM # 802.1Q VLAN priority
+# Options specifying server(s)
+#opt dns IP_LIST
+#opt wins IP_LIST
+#opt nissrv IP_LIST
+#opt ntpsrv IP_LIST
+#opt lprsrv IP_LIST
+#opt swapsrv IP
+# Options specifying routes
+#opt routes IP_PAIR_LIST
+#opt staticroutes STATIC_ROUTES # RFC 3442 classless static route option
+#opt msstaticroutes STATIC_ROUTES # same, using MS option number
+# Obsolete options, no longer supported
+#opt logsrv IP_LIST # 704/UDP log server (not syslog!)
+#opt namesrv IP_LIST # IEN 116 name server, obsolete (August 1979!!!)
+#opt cookiesrv IP_LIST # RFC 865 "quote of the day" server, rarely (never?) used
+#opt timesrv IP_LIST # RFC 868 time server, rarely (never?) used
+# TODO: in development
+#opt userclass STRING # RFC 3004. set of LASCII strings. "I am a printer" etc
+#opt sipserv STRING LIST # RFC 3361. flag byte, then: 0: domain names, 1: IP addrs
diff --git a/rules/busybox.make b/rules/busybox.make
index 31ef1ee..c02f594 100644
--- a/rules/busybox.make
+++ b/rules/busybox.make
@@ -222,6 +222,10 @@ ifdef PTXCONF_BUSYBOX_FEATURE_MDEV_CONF
@$(call install_alternative, busybox, 0, 0, 0644, /etc/mdev.conf)
endif
+ifdef PTXCONF_BUSYBOX_UDHCPD
+ @$(call install_alternative, busybox, 0, 0, 0644, /etc/udhcpd.conf)
+endif
+
ifdef PTXCONF_BUSYBOX_UDHCPC
@$(call install_alternative, busybox, 0, 0, 0754, /etc/udhcpc.script)
@$(call install_link, busybox, ../../../etc/udhcpc.script, /usr/share/udhcpc/default.script)
--
1.8.1.2
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2013-11-08 10:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-08 10:49 [ptxdist] udhcpd start script and config file Jean-Claude Monnin
2013-11-08 10:51 ` Jean-Claude Monnin [this message]
2013-11-08 10:52 ` [ptxdist] [PATCH 2/2] busybox: add option to install udhcpd start script Jean-Claude Monnin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B2FBF3B8-1153-425F-AB4E-481252D3AB5B@emailplus.org \
--to=jc_monnin@emailplus.org \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox