From: "Ulrich Ölmann" <u.oelmann@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH v5 1/3] mbedtls: new package
Date: Wed, 11 Mar 2020 16:36:07 +0100 [thread overview]
Message-ID: <6r4kuuq4yg.fsf@pengutronix.de> (raw)
In-Reply-To: <20200217093956.GH21732@pengutronix.de>
On Mon, Feb 17 2020 at 10:39 +0100, Michael Olbrich <m.olbrich@pengutronix.de> wrote:
> On Wed, Feb 05, 2020 at 11:42:39AM +0100, Ulrich Ölmann wrote:
>> From: Björn Esser <b.esser@pengutronix.de>
>>
>> mbed TLS (formerly known as PolarSSL) makes it trivially easy
>> for developers to include cryptographic and SSL/TLS capabilities
>> in their (embedded) products, facilitating this functionality
>> with a minimal coding footprint.
>>
>> Unfortunately the upcoming open62541 package cannot be built
>> against OpenSSL. To enable its SSL functionality mbed TLS is
>> needed.
>>
>> Signed-off-by: Björn Esser <b.esser@pengutronix.de>
>> [uol: adjusted commit message]
>> Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
>> ---
>> v2 --> v3: adjusted commit message
>
> Not your fault, but needs to be fixed:
>
> libssh2 now uses /usr/lib/libmbedcrypto.so.3 without depending on it :-/
Fixed in the next iteration of the series (to be sent in a few minutes)
by a version bump to a fixed release of libssh2.
Best regards
Ulrich
> Michael
>
>>
>> rules/mbedtls.in | 13 +++++++++
>> rules/mbedtls.make | 66 ++++++++++++++++++++++++++++++++++++++++++++++
>> 2 files changed, 79 insertions(+)
>> create mode 100644 rules/mbedtls.in
>> create mode 100644 rules/mbedtls.make
>>
>> diff --git a/rules/mbedtls.in b/rules/mbedtls.in
>> new file mode 100644
>> index 000000000000..a0d58dbd5468
>> --- /dev/null
>> +++ b/rules/mbedtls.in
>> @@ -0,0 +1,13 @@
>> +## SECTION=system_libraries
>> +
>> +config MBEDTLS
>> + tristate
>> + prompt "mbedtls"
>> + select HOST_CMAKE
>> + select LIBC_PTHREAD
>> + select ZLIB
>> + help
>> + mbed TLS (formerly known as PolarSSL) makes it trivially easy
>> + for developers to include cryptographic and SSL/TLS capabilities
>> + in their (embedded) products, facilitating this functionality
>> + with a minimal coding footprint.
>> diff --git a/rules/mbedtls.make b/rules/mbedtls.make
>> new file mode 100644
>> index 000000000000..0086492fc029
>> --- /dev/null
>> +++ b/rules/mbedtls.make
>> @@ -0,0 +1,66 @@
>> +# -*-makefile-*-
>> +#
>> +# Copyright (C) 2019 by Bjoern Esser <bes@pengutronix.de>
>> +#
>> +# For further information about the PTXdist project and license conditions
>> +# see the README file.
>> +#
>> +
>> +#
>> +# We provide this package
>> +#
>> +PACKAGES-$(PTXCONF_MBEDTLS) += mbedtls
>> +
>> +#
>> +# Paths and names
>> +#
>> +MBEDTLS_VERSION := 2.16.3
>> +MBEDTLS_MD5 := 90ce7c7a001d2514410280706b3ab1a7
>> +MBEDTLS := mbedtls-$(MBEDTLS_VERSION)
>> +MBEDTLS_SUFFIX := tgz
>> +MBEDTLS_URL := https://tls.mbed.org/download/$(MBEDTLS)-apache.$(MBEDTLS_SUFFIX)
>> +MBEDTLS_SOURCE := $(SRCDIR)/$(MBEDTLS).$(MBEDTLS_SUFFIX)
>> +MBEDTLS_DIR := $(BUILDDIR)/$(MBEDTLS)
>> +MBEDTLS_LICENSE := Apache-2.0
>> +MBEDTLS_LICENSE_FILES := file://apache-2.0.txt;md5=3b83ef96387f14655fc854ddc3c6bd57
>> +
>> +# ----------------------------------------------------------------------------
>> +# Prepare
>> +# ----------------------------------------------------------------------------
>> +
>> +#
>> +# cmake
>> +#
>> +MBEDTLS_CONF_TOOL := cmake
>> +MBEDTLS_CONF_OPT := \
>> + $(CROSS_CMAKE_USR) \
>> + -DENABLE_PROGRAMS=OFF \
>> + -DENABLE_TESTING=OFF \
>> + -DENABLE_ZLIB_SUPPORT=ON \
>> + -DINSTALL_MBEDTLS_HEADERS=ON \
>> + -DLINK_WITH_PTHREAD=ON \
>> + -DUNSAFE_BUILD=OFF \
>> + -DUSE_PKCS11_HELPER_LIBRARY=OFF \
>> + -DUSE_SHARED_MBEDTLS_LIBRARY=ON \
>> + -DUSE_STATIC_MBEDTLS_LIBRARY=OFF
>> +
>> +# ----------------------------------------------------------------------------
>> +# Target-Install
>> +# ----------------------------------------------------------------------------
>> +
>> +$(STATEDIR)/mbedtls.targetinstall:
>> + @$(call targetinfo)
>> +
>> + @$(call install_init, mbedtls)
>> + @$(call install_fixup, mbedtls,PRIORITY,optional)
>> + @$(call install_fixup, mbedtls,SECTION,base)
>> + @$(call install_fixup, mbedtls,AUTHOR,"Bjoern Esser <bes@pengutronix.de>")
>> + @$(call install_fixup, mbedtls,DESCRIPTION,missing)
>> +
>> + @$(call install_lib, mbedtls, 0, 0, 0644, libmbedcrypto)
>> + @$(call install_lib, mbedtls, 0, 0, 0644, libmbedtls)
>> + @$(call install_lib, mbedtls, 0, 0, 0644, libmbedx509)
>> +
>> + @$(call install_finish, mbedtls)
>> +
>> + @$(call touch)
>> --
>> 2.25.0
>>
>>
>> _______________________________________________
>> ptxdist mailing list
>> ptxdist@pengutronix.de
--
Pengutronix e.K. | Ulrich Ölmann |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
prev parent reply other threads:[~2020-03-11 15:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-05 10:42 Ulrich Ölmann
2020-02-05 10:42 ` [ptxdist] [PATCH v5 2/3] host-ua-nodeset: " Ulrich Ölmann
2020-02-05 10:42 ` [ptxdist] [PATCH v5 3/3] open62541: " Ulrich Ölmann
2020-02-14 12:50 ` Michael Olbrich
2020-02-17 9:50 ` Roland Hieber
2020-02-17 10:32 ` Michael Olbrich
2020-03-11 15:42 ` Ulrich Ölmann
2020-03-11 15:40 ` Ulrich Ölmann
2020-02-15 9:58 ` Michael Olbrich
2020-03-11 15:38 ` Ulrich Ölmann
2020-02-17 9:39 ` [ptxdist] [PATCH v5 1/3] mbedtls: " Michael Olbrich
2020-03-11 15:36 ` Ulrich Ölmann [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6r4kuuq4yg.fsf@pengutronix.de \
--to=u.oelmann@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox