From: Michael Riesch <michael.riesch@wolfvision.net>
To: ptxdist@pengutronix.de, m.olbrich@pengutronix.de
Cc: m.tretter@pengutronix.de
Subject: Re: [ptxdist] [PATCH v5 2/5] add package for rockchip firmware binaries
Date: Fri, 28 Jan 2022 13:46:25 +0100 [thread overview]
Message-ID: <5d8175cf-cc4b-dbe5-28d2-d535f77e4497@wolfvision.net> (raw)
In-Reply-To: <YfPiBEkHgyPyseMZ@pengutronix.de>
Hi Michael,
On 1/28/22 13:31, Michael Olbrich wrote:
> On Mon, Jan 24, 2022 at 01:09:39PM +0100, Michael Riesch wrote:
>> Rockchip provides the SDRAM initialization as well as BL31/BL32
>> firmware for their SoCs in binary form. Add a package that downloads
>> those binaries for further use in e.g., barebox.
>>
>> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
>> [revised and extended Kconfig]
>> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
>> ---
>> platforms/firmware-rockchip.in | 41 +++++++++++++++++++
>> rules/firmware-rockchip.make | 74 ++++++++++++++++++++++++++++++++++
>> 2 files changed, 115 insertions(+)
>> create mode 100644 platforms/firmware-rockchip.in
>> create mode 100644 rules/firmware-rockchip.make
>>
>> diff --git a/platforms/firmware-rockchip.in b/platforms/firmware-rockchip.in
>> new file mode 100644
>> index 000000000..aa702416d
>> --- /dev/null
>> +++ b/platforms/firmware-rockchip.in
>> @@ -0,0 +1,41 @@
>> +## SECTION=non_free_firmware
>> +
>> +menuconfig FIRMWARE_ROCKCHIP
>> + bool
>> + prompt "Rockchip firmware binaries "
>> + help
>> + Rockchip prebuilt SDRAM initialization and TF-A binaries.
>> +
>> +if FIRMWARE_ROCKCHIP
>> +
>> +config FIRMWARE_ROCKCHIP_RK3566_SDRAM
>
> I still don't like the sub-options here. But I'm still thinking about
> whether this part should go into PTXdist itself, so no need to touch this
> for now.
Care to give us some insight in your current state of reasoning as to
whether or not this should enter ptxdist?
Best regards,
Michael
>
> Michael
>
>> + bool
>> + prompt "RK3566 SDRAM init"
>> + help
>> + Rockchip RK3566 SDRAM initialization binary.
>> + Compatible with e.g., the Pine64 Quartz64 Model A board.
>> +
>> +config FIRMWARE_ROCKCHIP_RK3568_SDRAM
>> + bool
>> + prompt "RK3568 SDRAM init"
>> + help
>> + Rockchip RK3568 SDRAM initialization binary.
>> + Compatible with e.g., the Rockchip RK3568 EVB1 board.
>> +
>> +config FIRMWARE_ROCKCHIP_RK356x_BL31
>> + bool
>> + prompt "RK356x BL31 binary"
>> + help
>> + Rockchip RK3566/RK3568 BL31 binary.
>> + Compatible with e.g., the Pine64 Quartz64 Model A board
>> + and the Rockchip RK3568 EVB1 board.
>> +
>> +config FIRMWARE_ROCKCHIP_RK356x_BL32
>> + bool
>> + prompt "RK356x BL32 binary"
>> + help
>> + Rockchip RK3566/RK3568 BL32 binary.
>> + Compatible with e.g., the Pine64 Quartz64 Model A board
>> + and the Rockchip RK3568 EVB1 board.
>> +
>> +endif
>> diff --git a/rules/firmware-rockchip.make b/rules/firmware-rockchip.make
>> new file mode 100644
>> index 000000000..dd50c865a
>> --- /dev/null
>> +++ b/rules/firmware-rockchip.make
>> @@ -0,0 +1,74 @@
>> +# -*-makefile-*-
>> +#
>> +# Copyright (C) 2021 by Michael Tretter <m.tretter@pengutronix.de>
>> +#
>> +# For further information about the PTXdist project and license conditions
>> +# see the README file.
>> +#
>> +
>> +#
>> +# We provide this package
>> +#
>> +PACKAGES-$(PTXCONF_FIRMWARE_ROCKCHIP) += firmware-rockchip
>> +
>> +FIRMWARE_ROCKCHIP_VERSION := 2021-06-01-g7d631e0d
>> +FIRMWARE_ROCKCHIP_MD5 := 4ca62f76ca75019dc708c4cb7cc31b0a
>> +FIRMWARE_ROCKCHIP := firmware-rockchip-$(FIRMWARE_ROCKCHIP_VERSION)
>> +FIRMWARE_ROCKCHIP_SUFFIX := zip
>> +FIRMWARE_ROCKCHIP_URL := https://github.com/rockchip-linux/rkbin/archive/$(FIRMWARE_ROCKCHIP_VERSION).$(FIRMWARE_ROCKCHIP_SUFFIX)
>> +FIRMWARE_ROCKCHIP_SOURCE := $(SRCDIR)/$(FIRMWARE_ROCKCHIP).$(FIRMWARE_ROCKCHIP_SUFFIX)
>> +FIRMWARE_ROCKCHIP_DIR := $(BUILDDIR)/$(FIRMWARE_ROCKCHIP)
>> +FIRMWARE_ROCKCHIP_LICENSE := proprietary
>> +
>> +# ----------------------------------------------------------------------------
>> +# Prepare
>> +# ----------------------------------------------------------------------------
>> +
>> +FIRMWARE_ROCKCHIP_CONF_TOOL := NO
>> +
>> +# ----------------------------------------------------------------------------
>> +# Compile
>> +# ----------------------------------------------------------------------------
>> +
>> +$(STATEDIR)/firmware-rockchip.compile:
>> + @$(call targetinfo)
>> + @$(call touch)
>> +
>> +# ----------------------------------------------------------------------------
>> +# Install
>> +# ----------------------------------------------------------------------------
>> +
>> +$(STATEDIR)/firmware-rockchip.install:
>> + @$(call targetinfo)
>> +
>> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK3566_SDRAM
>> + install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3566_ddr_1056MHz_v1.08.bin \
>> + $(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3566_ddr_1056MHz_v1.08.bin
>> +endif
>> +
>> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK3568_SDRAM
>> + install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3568_ddr_1560MHz_v1.08.bin \
>> + $(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3568_ddr_1560MHz_v1.08.bin
>> +endif
>> +
>> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK356x_BL31
>> + install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3568_bl31_v1.24.elf \
>> + $(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3568_bl31_v1.24.elf
>> +endif
>> +
>> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK356x_BL32
>> + install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3568_bl32_v1.05.bin \
>> + $(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3568_bl32_v1.05.bin
>> +endif
>> +
>> + @$(call touch)
>> +
>> +# ----------------------------------------------------------------------------
>> +# Target-Install
>> +# ----------------------------------------------------------------------------
>> +
>> +$(STATEDIR)/firmware-rockchip.targetinstall:
>> + @$(call targetinfo)
>> + @$(call touch)
>> +
>> +# vim: syntax=make
>> --
>> 2.30.2
>>
>>
>> _______________________________________________
>> ptxdist mailing list
>> ptxdist@pengutronix.de
>> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
>>
>
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
next prev parent reply other threads:[~2022-01-28 12:46 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-24 12:09 [ptxdist] [PATCH v5 0/5] Add support for Rockchip firmware blobs Michael Riesch
2022-01-24 12:09 ` [ptxdist] [PATCH v5 1/5] platforms: add section for non-free " Michael Riesch
2022-01-24 12:09 ` [ptxdist] [PATCH v5 2/5] add package for rockchip firmware binaries Michael Riesch
2022-01-28 12:31 ` Michael Olbrich
2022-01-28 12:46 ` Michael Riesch [this message]
2022-01-28 12:59 ` Michael Olbrich
2022-01-28 13:46 ` Michael Riesch
2022-01-24 12:09 ` [ptxdist] [PATCH v5 3/5] scripts: add helper to inject files into a source directory Michael Riesch
2022-01-28 12:27 ` Michael Olbrich
2022-01-24 12:09 ` [ptxdist] [PATCH v5 4/5] barebox: add integration of firmware blobs Michael Riesch
2022-01-28 12:28 ` Michael Olbrich
2022-01-24 12:09 ` [ptxdist] [RFC PATCH v5 5/5] barebox.rockchip: add binary firmware blobs for quartz64 and rk3568-evb1 Michael Riesch
2022-01-28 12:33 ` Michael Olbrich
2022-01-28 15:26 ` Michael Riesch
2022-01-28 16:10 ` Michael Olbrich
2022-01-28 16:48 ` Michael Riesch
2022-01-28 20:08 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5d8175cf-cc4b-dbe5-28d2-d535f77e4497@wolfvision.net \
--to=michael.riesch@wolfvision.net \
--cc=m.olbrich@pengutronix.de \
--cc=m.tretter@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox