* [ptxdist] canutils problem on mainline kernel
@ 2016-04-13 13:46 Clemens Gruber
2016-04-13 13:52 ` Marc Kleine-Budde
2016-04-13 14:15 ` Marc Kleine-Budde
0 siblings, 2 replies; 7+ messages in thread
From: Clemens Gruber @ 2016-04-13 13:46 UTC (permalink / raw)
To: ptxdist; +Cc: mkl
Hi,
it looks like the canutils from ptxdist do not work anymore with the
current mainline kernel 4.6. (Working fine on 4.5)
Did you also notice this?
I can reproduce it with the flexcan driver on an i.MX6Q board. I get out
of range errors when trying to set the bitrate.
I saw that some of you created a new project "can-utils":
https://github.com/linux-can/can-utils
Is there a replacement for the canconfig utility from canutils?
Thanks,
Clemens
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ptxdist] canutils problem on mainline kernel
2016-04-13 13:46 [ptxdist] canutils problem on mainline kernel Clemens Gruber
@ 2016-04-13 13:52 ` Marc Kleine-Budde
2016-04-13 14:03 ` Marc Kleine-Budde
2016-04-13 14:16 ` Clemens Gruber
2016-04-13 14:15 ` Marc Kleine-Budde
1 sibling, 2 replies; 7+ messages in thread
From: Marc Kleine-Budde @ 2016-04-13 13:52 UTC (permalink / raw)
To: Clemens Gruber, ptxdist, linux-can
[-- Attachment #1.1.1: Type: text/plain, Size: 998 bytes --]
On 04/13/2016 03:46 PM, Clemens Gruber wrote:
> it looks like the canutils from ptxdist do not work anymore with the
> current mainline kernel 4.6. (Working fine on 4.5)
>
> Did you also notice this?
No. What's the outout of:
canconfig can0
> I can reproduce it with the flexcan driver on an i.MX6Q board. I get out
> of range errors when trying to set the bitrate.
There was a problem with the CAN clock on some imx in the kernel recently.
> I saw that some of you created a new project "can-utils":
> https://github.com/linux-can/can-utils
>
> Is there a replacement for the canconfig utility from canutils?
You can use the "ip" tool from iproute2 (not the one from busybox).
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 455 bytes --]
[-- Attachment #2: Type: text/plain, Size: 91 bytes --]
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ptxdist] canutils problem on mainline kernel
2016-04-13 13:52 ` Marc Kleine-Budde
@ 2016-04-13 14:03 ` Marc Kleine-Budde
2016-04-13 14:16 ` Clemens Gruber
1 sibling, 0 replies; 7+ messages in thread
From: Marc Kleine-Budde @ 2016-04-13 14:03 UTC (permalink / raw)
To: Clemens Gruber, ptxdist, linux-can
[-- Attachment #1.1.1: Type: text/plain, Size: 605 bytes --]
On 04/13/2016 03:52 PM, Marc Kleine-Budde wrote:
>> I can reproduce it with the flexcan driver on an i.MX6Q board. I get out
>> of range errors when trying to set the bitrate.
>
> There was a problem with the CAN clock on some imx in the kernel recently.
You probably need:
https://lkml.org/lkml/2016/3/30/299
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 455 bytes --]
[-- Attachment #2: Type: text/plain, Size: 91 bytes --]
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ptxdist] canutils problem on mainline kernel
2016-04-13 13:52 ` Marc Kleine-Budde
2016-04-13 14:03 ` Marc Kleine-Budde
@ 2016-04-13 14:16 ` Clemens Gruber
2016-04-13 14:17 ` Marc Kleine-Budde
1 sibling, 1 reply; 7+ messages in thread
From: Clemens Gruber @ 2016-04-13 14:16 UTC (permalink / raw)
To: Marc Kleine-Budde; +Cc: ptxdist
On Wed, Apr 13, 2016 at 03:52:34PM +0200, Marc Kleine-Budde wrote:
> No. What's the outout of:
>
> canconfig can0
>
The output is:
no bittiming data found
can0: failed to get bitrate
>
> There was a problem with the CAN clock on some imx in the kernel recently.
Hmm. in /sys/kernel/debug/clk/clk_summary, I see enable_cnt is 0 for
all can clocks.
Thank you Mark! With your hints, I found this bugfix on LKML:
https://lkml.org/lkml/2016/3/30/299
^ A very subtle typo!
Thanks,
Clemens
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ptxdist] canutils problem on mainline kernel
2016-04-13 14:16 ` Clemens Gruber
@ 2016-04-13 14:17 ` Marc Kleine-Budde
2016-04-13 14:18 ` Clemens Gruber
0 siblings, 1 reply; 7+ messages in thread
From: Marc Kleine-Budde @ 2016-04-13 14:17 UTC (permalink / raw)
To: Clemens Gruber; +Cc: ptxdist
[-- Attachment #1.1.1: Type: text/plain, Size: 898 bytes --]
On 04/13/2016 04:16 PM, Clemens Gruber wrote:
> On Wed, Apr 13, 2016 at 03:52:34PM +0200, Marc Kleine-Budde wrote:
>> No. What's the outout of:
>>
>> canconfig can0
>>
>
> The output is:
> no bittiming data found
> can0: failed to get bitrate
>
>>
>> There was a problem with the CAN clock on some imx in the kernel recently.
>
> Hmm. in /sys/kernel/debug/clk/clk_summary, I see enable_cnt is 0 for
> all can clocks.
>
> Thank you Mark! With your hints, I found this bugfix on LKML:
> https://lkml.org/lkml/2016/3/30/299
> ^ A very subtle typo!
V
ACK - It's Marc :D
regards
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 455 bytes --]
[-- Attachment #2: Type: text/plain, Size: 91 bytes --]
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ptxdist] canutils problem on mainline kernel
2016-04-13 13:46 [ptxdist] canutils problem on mainline kernel Clemens Gruber
2016-04-13 13:52 ` Marc Kleine-Budde
@ 2016-04-13 14:15 ` Marc Kleine-Budde
1 sibling, 0 replies; 7+ messages in thread
From: Marc Kleine-Budde @ 2016-04-13 14:15 UTC (permalink / raw)
To: Clemens Gruber, ptxdist
[-- Attachment #1.1.1: Type: text/plain, Size: 835 bytes --]
On 04/13/2016 03:46 PM, Clemens Gruber wrote:
> Hi,
>
> it looks like the canutils from ptxdist do not work anymore with the
> current mainline kernel 4.6. (Working fine on 4.5)
>
> Did you also notice this?
>
> I can reproduce it with the flexcan driver on an i.MX6Q board. I get out
> of range errors when trying to set the bitrate.
>
> I saw that some of you created a new project "can-utils":
> https://github.com/linux-can/can-utils
>
> Is there a replacement for the canconfig utility from canutils?
>
> Thanks,
> Clemens
>
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 455 bytes --]
[-- Attachment #2: Type: text/plain, Size: 91 bytes --]
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-04-13 14:18 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-13 13:46 [ptxdist] canutils problem on mainline kernel Clemens Gruber
2016-04-13 13:52 ` Marc Kleine-Budde
2016-04-13 14:03 ` Marc Kleine-Budde
2016-04-13 14:16 ` Clemens Gruber
2016-04-13 14:17 ` Marc Kleine-Budde
2016-04-13 14:18 ` Clemens Gruber
2016-04-13 14:15 ` Marc Kleine-Budde
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox