* [ptxdist] [PATCHv3 1/1] linux-pam: this patch add Linux-PAM support to ptxdist
@ 2015-03-31 13:49 Oliver Graute
2015-03-31 16:41 ` Marc Kleine-Budde
0 siblings, 1 reply; 2+ messages in thread
From: Oliver Graute @ 2015-03-31 13:49 UTC (permalink / raw)
To: ptxdist; +Cc: Oliver Graute
this patch add Linux-PAM support to ptxdist
Signed-off-by: Oliver Graute <oliver.graute@neuhaus.de>
---
rules/linux-pam.in | 13 ++++++++++++
rules/linux-pam.make | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 69 insertions(+)
create mode 100644 rules/linux-pam.in
create mode 100644 rules/linux-pam.make
diff --git a/rules/linux-pam.in b/rules/linux-pam.in
new file mode 100644
index 0000000..d76e4db
--- /dev/null
+++ b/rules/linux-pam.in
@@ -0,0 +1,13 @@
+## SECTION=networking
+
+config LINUX_PAM
+ tristate
+ prompt "linux-pam"
+ help
+ Linux-PAM is a free implementation of the following DCE-RFC from
+ Sunsoft. PAM provides a way to develop programs that are
+ independent of authentication scheme. These programs need
+ "authentication modules" to be attatched to them at run-time
+ in order to work. Which authentication module is to be attatched
+ is dependent upon the local system setup and is at the discretion
+ of the local system administrator.
diff --git a/rules/linux-pam.make b/rules/linux-pam.make
new file mode 100644
index 0000000..59bf966
--- /dev/null
+++ b/rules/linux-pam.make
@@ -0,0 +1,56 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2015 Dr. Neuhaus Telekommunikation GmbH, Hamburg Germany, Oliver Graute <oliver.graute@neuhaus.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_LINUX_PAM) += linux-pam
+
+#
+# Paths and names
+#
+LINUX_PAM_VERSION := 1.1.8
+LINUX_PAM_MD5 := 35b6091af95981b1b2cd60d813b5e4ee
+LINUX_PAM := Linux-PAM-$(LINUX_PAM_VERSION)
+LINUX_PAM_SUFFIX := tar.bz2
+LINUX_PAM_URL := http://www.linux-pam.org/library/$(LINUX_PAM).$(LINUX_PAM_SUFFIX)
+LINUX_PAM_SOURCE := $(SRCDIR)/$(LINUX_PAM).$(LINUX_PAM_SUFFIX)
+LINUX_PAM_DIR := $(BUILDDIR)/$(LINUX_PAM)
+LINUX_PAM_LICENSE := GPL, BSD
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+#
+# autoconf
+#
+LINUX_PAM_CONF_TOOL := autoconf
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/linux-pam.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, linux-pam)
+ @$(call install_fixup, linux-pam,PRIORITY,optional)
+ @$(call install_fixup, linux-pam,SECTION,base)
+ @$(call install_fixup, linux-pam,AUTHOR,"<oliver.graute@neuhaus.de>")
+ @$(call install_fixup, linux-pam,DESCRIPTION,missing)
+
+ @$(call install_lib, linux-pam, 0, 0, 0644, libpam)
+
+ @$(call install_alternative, linux-pam, 0, 0, 0644, /conf/pam.conf)
+ @$(call install_finish, linux-pam)
+
+ @$(call touch)
+
+# vim: syntax=make
--
1.7.9.5
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [ptxdist] [PATCHv3 1/1] linux-pam: this patch add Linux-PAM support to ptxdist
2015-03-31 13:49 [ptxdist] [PATCHv3 1/1] linux-pam: this patch add Linux-PAM support to ptxdist Oliver Graute
@ 2015-03-31 16:41 ` Marc Kleine-Budde
0 siblings, 0 replies; 2+ messages in thread
From: Marc Kleine-Budde @ 2015-03-31 16:41 UTC (permalink / raw)
To: ptxdist; +Cc: Oliver Graute
[-- Attachment #1.1: Type: text/plain, Size: 3632 bytes --]
On 03/31/2015 03:49 PM, Oliver Graute wrote:
> this patch add Linux-PAM support to ptxdist
>
> Signed-off-by: Oliver Graute <oliver.graute@neuhaus.de>
> ---
> rules/linux-pam.in | 13 ++++++++++++
> rules/linux-pam.make | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 69 insertions(+)
> create mode 100644 rules/linux-pam.in
> create mode 100644 rules/linux-pam.make
>
> diff --git a/rules/linux-pam.in b/rules/linux-pam.in
> new file mode 100644
> index 0000000..d76e4db
> --- /dev/null
> +++ b/rules/linux-pam.in
> @@ -0,0 +1,13 @@
> +## SECTION=networking
> +
> +config LINUX_PAM
> + tristate
> + prompt "linux-pam"
> + help
> + Linux-PAM is a free implementation of the following DCE-RFC from
> + Sunsoft. PAM provides a way to develop programs that are
> + independent of authentication scheme. These programs need
> + "authentication modules" to be attatched to them at run-time
> + in order to work. Which authentication module is to be attatched
> + is dependent upon the local system setup and is at the discretion
> + of the local system administrator.
> diff --git a/rules/linux-pam.make b/rules/linux-pam.make
> new file mode 100644
> index 0000000..59bf966
> --- /dev/null
> +++ b/rules/linux-pam.make
> @@ -0,0 +1,56 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2015 Dr. Neuhaus Telekommunikation GmbH, Hamburg Germany, Oliver Graute <oliver.graute@neuhaus.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_LINUX_PAM) += linux-pam
> +
> +#
> +# Paths and names
> +#
> +LINUX_PAM_VERSION := 1.1.8
> +LINUX_PAM_MD5 := 35b6091af95981b1b2cd60d813b5e4ee
> +LINUX_PAM := Linux-PAM-$(LINUX_PAM_VERSION)
> +LINUX_PAM_SUFFIX := tar.bz2
> +LINUX_PAM_URL := http://www.linux-pam.org/library/$(LINUX_PAM).$(LINUX_PAM_SUFFIX)
> +LINUX_PAM_SOURCE := $(SRCDIR)/$(LINUX_PAM).$(LINUX_PAM_SUFFIX)
> +LINUX_PAM_DIR := $(BUILDDIR)/$(LINUX_PAM)
> +LINUX_PAM_LICENSE := GPL, BSD
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
Nitpick: one empty line here, pleae
> +#
> +# autoconf
> +#
> +LINUX_PAM_CONF_TOOL := autoconf
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/linux-pam.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, linux-pam)
> + @$(call install_fixup, linux-pam,PRIORITY,optional)
> + @$(call install_fixup, linux-pam,SECTION,base)
> + @$(call install_fixup, linux-pam,AUTHOR,"<oliver.graute@neuhaus.de>")
> + @$(call install_fixup, linux-pam,DESCRIPTION,missing)
> +
> + @$(call install_lib, linux-pam, 0, 0, 0644, libpam)
> +
> + @$(call install_alternative, linux-pam, 0, 0, 0644, /conf/pam.conf)
/conf is an unusual place to put config files. Why not use /etc?
> + @$(call install_finish, linux-pam)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
>
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
[-- Attachment #2: Type: text/plain, Size: 48 bytes --]
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-03-31 16:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-31 13:49 [ptxdist] [PATCHv3 1/1] linux-pam: this patch add Linux-PAM support to ptxdist Oliver Graute
2015-03-31 16:41 ` Marc Kleine-Budde
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox