On 09/29/2014 07:12 PM, Andreas Pretzsch wrote: > Signed-off-by: Andreas Pretzsch > --- > ...c-correct-test-for-USB_BLASTER_DRIVER-AM-.patch | 33 ++++ > ...e-correct-test-for-USB_BLASTER_DRIVER-AM-.patch | 20 +++ > patches/openocd-0.8.0/series | 4 + > rules/host-openocd.in | 199 +++++++++++++++++++++ > rules/host-openocd.make | 76 ++++++++ > rules/openocd.in | 199 +++++++++++++++++++++ > rules/openocd.make | 96 ++++++++++ > 7 files changed, 627 insertions(+) > create mode 100644 patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch > create mode 100644 patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch > create mode 100644 patches/openocd-0.8.0/series > create mode 100644 rules/host-openocd.in > create mode 100644 rules/host-openocd.make > create mode 100644 rules/openocd.in > create mode 100644 rules/openocd.make > [...] > --- /dev/null > +++ b/patches/openocd-0.8.0/series > @@ -0,0 +1,4 @@ > +# keep 0001 disabled, as changing configure.ac will trigger autotools > +# invocation. The changes from 0001 are done by 0002 in "configure". > +# 0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch > +0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch Please drop patch 2, activate patch 1 and create a link to ../autgen.sh in patches/openocd-0.8.0 regards, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |