[ptxdist] imx6 device tree file changes (pinctrl)

[ptxdist] imx6 device tree file changes (pinctrl)

[Sophie CARAYOL]

Hello,

This question concerns the imx6qdl-tqma6x.dtsi file written by Sascha Hauer,
Pengutronix, but I don't know if he can answer. 

Nevertheless, it could be a more general question : I want to know if the
32-bit words programmed in the following lines concern the
IOMUXC_SW_PAD_CTL_PAD registers that is to say IOMUXC_SW_PAD_CTL_PAD_GPIO5
and IOMUXC_SW_PAD_CTL_PAD_GPIO6 registers (Cf. theIMX6SDL Reference Manuel). 

Because in the Reference Manuel bits 31-17 are reserved and always 0. Why is
there a '4' in these bits ? Or is it another register ?

-----------------------------------------------------------------------

i2c3 {
		pinctrl_i2c3_2: i2c3grp-2 {
			fsl,pins = <
				MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
				MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
			>;
		};
	};

-----------------------------------------------------------------------

Best regards,
Sophie CARAYOL


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] imx6 device tree file changes (pinctrl)

[Juergen Borleis]

Hi Sopie,

On Tuesday 20 May 2014 10:02:29 Sophie CARAYOL wrote:
> This question concerns the imx6qdl-tqma6x.dtsi file written by Sascha
> Hauer, Pengutronix, but I don't know if he can answer.

It's offtopic here. This list is a PTXdist related developer's list and not 
hardware specific.
We offer the free OSELAS.Community [1] mailing list for this kind of questions 
or commercial support as well.

Regards,
Juergen

[1] http://www.pengutronix.de/mailinglists/index_en.html, "Community Mailing 
Lists for generic Board Support Packages"

-- 
Pengutronix e.K.                              | Juergen Borleis             |
Linux Solutions for Science and Industry      | http://www.pengutronix.de/  |

-- 
ptxdist mailing list
ptxdist@pengutronix.de

[ptxdist] last packages compiled

[jerome gaudichon]

[-- Attachment #1.1: Type: text/plain, Size: 146 bytes --]

Hello girls and guys,

It is a possibility to know easily last packages compiled with my last 
/"ptxdist go"/ command ?

thanks

jérôme


[-- Attachment #1.2: Type: text/html, Size: 391 bytes --]

[-- Attachment #2: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] last packages compiled

[Guillermo Rodriguez Garcia]

Hi Jérôme,

You can get a list with the following command:

ptxdist print PTX_PACKAGES_SELECTED

Best,

Guillermo Rodriguez


2014-05-21 16:29 GMT+02:00 jerome gaudichon <j.gaudichon@robotikdose.com>:
> Hello girls and guys,
>
> It is a possibility to know easily last packages compiled with my last
> "ptxdist go" command ?
>
> thanks
>
> jérôme
>
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>



-- 
Guillermo Rodriguez Garcia
guille.rodriguez@gmail.com

-- 
ptxdist mailing list
ptxdist@pengutronix.de