[ptxdist] [PATCH 1/2] Add host-parted

[ptxdist] [PATCH 1/2] Add host-parted

[Bernhard Walle]

Signed-off-by: Bernhard Walle <walle@corscience.de>
---
 platforms/hosttools.in |    1 +
 rules/host-parted.in   |    8 ++++++++
 rules/host-parted.make |   38 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 47 insertions(+)
 create mode 100644 rules/host-parted.in
 create mode 100644 rules/host-parted.make

diff --git a/platforms/hosttools.in b/platforms/hosttools.in
index e9ce0fc..10d05e8 100644
--- a/platforms/hosttools.in
+++ b/platforms/hosttools.in
@@ -18,6 +18,7 @@ source "rules/host-mkelfImage.in"
 source "rules/host-mtd-utils.in"
 source "rules/host-mtools.in"
 source "rules/host-openssl.in"
+source "rules/host-parted.in"
 source "rules/host-squashfs-tools.in"
 source "rules/host-u-boot-tools.in"
 source "rules/host-util-linux-ng.in"
diff --git a/rules/host-parted.in b/rules/host-parted.in
new file mode 100644
index 0000000..d150ffd
--- /dev/null
+++ b/rules/host-parted.in
@@ -0,0 +1,8 @@
+## SECTION=hosttools_noprompt
+
+config HOST_PARTED
+	bool
+	default ALLYES
+	help
+	  The well-known parted program
+
diff --git a/rules/host-parted.make b/rules/host-parted.make
new file mode 100644
index 0000000..9655f5d
--- /dev/null
+++ b/rules/host-parted.make
@@ -0,0 +1,38 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2006 by Robert Schwebel
+#               2009 by Marc Kleine-Budde <mkl@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_PARTED) += host-parted
+
+#
+# Paths and names
+#
+HOST_PARTED		= $(PARTED)
+HOST_PARTED_DIR		= $(HOST_BUILDDIR)/$(HOST_PARTED)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+HOST_PARTED_ENV 	:= $(HOST_ENV)
+
+#
+# autoconf
+#
+HOST_PARTED_AUTOCONF := $(HOST_AUTOCONF) \
+	--disable-device-mapper \
+	--disable-Werror
+
+HOST_PARTED_INSTALL_OPT := install
+
+# vim: syntax=make
-- 
1.7.9.4


-- 
ptxdist mailing list
ptxdist@pengutronix.de

[ptxdist] [PATCH 2/2] Allow creation of bootable SD card for OMAP CPUs

[Bernhard Walle]

With the new option IMAGE_OMAPSD it's possible to create an image for
OMAP-bootable SD cards. Tested with a devkit8000 and a virtual beagle
board (qemu).

See the comment in platforms/image_omapsd.in for more information.

Signed-off-by: Bernhard Walle <walle@corscience.de>
---
 platforms/image_omapsd.in    |   48 +++++++++++++
 rules/post/image_omapsd.make |   32 +++++++++
 scripts/genomapsdimg         |  160 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 240 insertions(+)
 create mode 100644 platforms/image_omapsd.in
 create mode 100644 rules/post/image_omapsd.make
 create mode 100755 scripts/genomapsdimg

diff --git a/platforms/image_omapsd.in b/platforms/image_omapsd.in
new file mode 100644
index 0000000..ef6c5e4
--- /dev/null
+++ b/platforms/image_omapsd.in
@@ -0,0 +1,48 @@
+## SECTION=image
+
+menuconfig IMAGE_OMAPSD
+	bool
+	select IMAGE_VFAT_TOOLS
+	select HOST_PARTED
+	select IMAGE_EXT2
+	depends on ARCH_ARM
+	prompt "Generate OMAP bootable SD card"
+	help
+	  Creates an bootable SD card for OMAP CPUs, for example for the beagle board.
+	  The resulting image is called "omap_sd.img". You can copy it with "dd"
+	  on a raw SD card, without partitioning.
+
+	  The SD card contains two file systems:
+	    1) A FAT file system that contains MLO, a bootloader and a Linux kernel
+	       (plus additional files like an initramfs).
+	    2) The root file system as ext3 file system.
+
+	  OMAP has special requirements regarding the geometry of partition table,
+	  and the location of MLO, that's why a fixed image makes more sense here
+	  than copying the files manually.
+
+if IMAGE_OMAPSD
+
+config IMAGE_OMAPSD_BOOTLOADER
+	string
+	default "u-boot.img"
+	prompt "Bootloader file"
+	help
+	  The name of the bootloader that should be copied to the SD card. If you use
+	  u-boot SPL, then "u-boot.img" is the right choice here. If you still use
+	  x-loader, then "u-boot.bin" should be copied. Also barebox can be used
+	  with its MLO. The file must reside in the images directory of the platform.
+
+config IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES
+	string
+	default ""
+	prompt "Additional files for the boot partition"
+	help
+	  A (whitespace separated) list of additional files can be specified here.
+	  The files get copied in the boot partition (1st FAT partition). They must
+	  be in the images/ directory of the platform that is built. One example is
+	  a uRamdisk that gets loaded by the bootloader.
+
+endif
+
+# vim: set sw=8 ts=8 noet ft=kconfig:
diff --git a/rules/post/image_omapsd.make b/rules/post/image_omapsd.make
new file mode 100644
index 0000000..3741106
--- /dev/null
+++ b/rules/post/image_omapsd.make
@@ -0,0 +1,32 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2012 by the ptxdist project <ptxdist@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+SEL_ROOTFS-$(PTXCONF_IMAGE_OMAPSD)		+= $(IMAGEDIR)/omap_sd.img
+
+# preprend the $(IMAGEDIR) if PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES is not
+# empty
+ifneq ($(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES),"")
+PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES_FULL := \
+	$(addprefix $(IMAGEDIR)/, $(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES))
+endif
+
+$(IMAGEDIR)/omap_sd.img: $(IMAGEDIR)/root.ext2
+	@ln -sf $(IMAGEDIR)/linuximage $(IMAGEDIR)/uImage
+	@echo "Creating bootable SD card for OMAP";					\
+	PATH=$(PTXCONF_SYSROOT_HOST)/bin:$$PATH $(PTXDIST_TOPDIR)/scripts/genomapsdimg	\
+		 -m $(IMAGEDIR)/MLO							\
+		 -b $(IMAGEDIR)/u-boot.img						\
+		 -k $(IMAGEDIR)/uImage							\
+		 -f $(IMAGEDIR)/root.ext2						\
+		 -a "$(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES_FULL)"		\
+		 -o $@
+	@echo "done."
+
+# vim: syntax=make
diff --git a/scripts/genomapsdimg b/scripts/genomapsdimg
new file mode 100755
index 0000000..9c87e45
--- /dev/null
+++ b/scripts/genomapsdimg
@@ -0,0 +1,160 @@
+#!/bin/bash
+
+# Creates a OMAP bootable SD card.
+# The image has a PC-style partition table with two partitions:
+#
+#   1) a FAT partition with MLO, bootloader and a Linux kernel
+#   2) a ext3 partition with the root file system.
+#
+# That's a bit tricky because the OMAP needs a special partition table
+# (therefore, genpart cannot be used).
+#
+# Parts of the script have been copied from 'debian-cd' (post-boot-armel).
+
+# exit on error
+set -e
+
+usage() {
+cat <<-EOF
+
+Usage: `basename "$0"` OPTIONS
+
+    -h              this help
+    -m <mlo>        path to the MLO file (SPL)
+    -b <bootloader> path to the bootloader
+    -k <kernel>     path to the linux kernel
+    -a <file>       additional file that should be included in the FAT partition
+                    (e.g. a FTD or an initramfs). Multiple files can be specified
+                    using whitespace separation. Don't forget to quote.
+    -f <filesystem> the (ext3) file system image for the second partition
+    -o <output>     the output file that should be written
+
+EOF
+}
+
+file_length()
+{
+	stat -c %s "$1"
+}
+
+create_partitions()
+{
+	local boot_size="$((72 * 1024 * 1024))" # 72 MB for the partition
+	local image_size="$(file_length "${FILESYSTEM}")"
+	local img_size_blocks="$(((${boot_size} + ${image_size} + 512 - 1) / 512))"
+
+	dd if=/dev/zero of="${OUTPUT}" bs=512 count=0 seek="${img_size_blocks}" >/dev/null 2>&1
+
+	local trg_size="$(file_length "${OUTPUT}")"
+	local cylinders=$(echo ${trg_size}/255/63/512 | bc)
+
+	{
+		echo ,9,0x0C,*
+		echo ,,,-
+	} | sfdisk -D -H 255 -S 63 -C ${cylinders} "${OUTPUT}" >/dev/null 2>&1
+}
+
+check_input()
+{
+	if ! [ -r "${MLO}" ] ; then
+		echo "MLO '${MLO}' does not exist."
+		usage
+		exit 1
+	fi
+
+	if ! [ -r "${BOOTLOADER}" ] ; then
+		echo "Bootloader '${BOOTLOADER}' does not exist."
+		usage
+		exit 1
+	fi
+
+	if ! [ -r "${KERNEL}" ] ; then
+		echo "Kernel '${KERNEL}' does not exist."
+		usage
+		exit 1
+	fi
+
+	if ! [ -r "${FILESYSTEM}" ] ; then
+		echo "File system image '${FILESYSTEM}' does not exist."
+		usage
+		exit 1
+	fi
+}
+
+create_filesystem()
+{
+	local vatstart=$(parted "${OUTPUT}" unit B print 2>/dev/null|grep "^ 1"|awk '{print $2}')
+	local vatsize=$(LANG=C fdisk -l "${OUTPUT}" 2>/dev/null|grep W95 |awk '{print $5}')
+
+	mkdosfs -F 32 -C "${OUTPUT_FAT}" "${vatsize}" >/dev/null 2>&1
+}
+
+copy_files()
+{
+	export MTOOLS_SKIP_CHECK=1
+
+	# it's important to copy the MLO first
+	mcopy -i "${OUTPUT_FAT}" "${MLO}" ::MLO
+	mcopy -i "${OUTPUT_FAT}" "${BOOTLOADER}" "::$(basename "${BOOTLOADER}")"
+	mcopy -i "${OUTPUT_FAT}" "${KERNEL}" "::$(basename "${KERNEL}")"
+
+	# copy additional files (like FTD or an initramfs)
+	if [ -n "$ADDITIONAL_FILES" ] ; then
+		for file in ${ADDITIONAL_FILES} ; do
+			local targetname=$(basename "${file}")
+			mcopy -i "${OUTPUT_FAT}" "${file}" "::${targetname}"
+		done
+	fi
+}
+
+create_image()
+{
+	# now put the whole vfat into the first partition
+	local vatstart=$(parted "${OUTPUT}" unit B print 2>/dev/null | grep "^ 1" | awk '{print $2}')
+
+	dd conv=notrunc bs="${vatstart%B}" if="${OUTPUT_FAT}" of="${OUTPUT}" seek=1 >/dev/null 2>&1
+	rm "${OUTPUT_FAT}"
+
+	# put ext3 content into the second partition
+	local ext3start=$(parted "${OUTPUT}" unit B print 2>/dev/null | grep "^ 2" | awk '{print $2}')
+	dd conv=notrunc bs="${ext3start%B}" if="${FILESYSTEM}" of="${OUTPUT}" seek=1 >/dev/null 2>&1
+}
+
+
+# command line parsing
+
+while getopts hm:b:k:a:f:o: name ; do
+	case $name in
+		m)  MLO="${OPTARG}"
+			;;
+		b)  BOOTLOADER="${OPTARG}"
+			;;
+		k)  KERNEL="${OPTARG}"
+			;;
+		a)  ADDITIONAL_FILES="${OPTARG}"
+			;;
+		f)  FILESYSTEM="${OPTARG}"
+			;;
+		o)  OUTPUT="${OPTARG}"
+			;;
+		h)  usage
+			exit 0
+			;;
+		*)  usage
+			exit 1
+			;;
+	esac
+done
+
+OUTPUT_FAT="${OUTPUT}.vfat"
+[ -r "${OUTPUT_FAT}" ] && rm "${OUTPUT_FAT}"
+
+check_input
+create_partitions
+create_filesystem
+copy_files
+create_image
+
+echo "${OUTPUT} ready"
+
+# vim: set sw=4 ts=4 noet:
-- 
1.7.9.4


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH 2/2] Allow creation of bootable SD card for OMAP CPUs

[Andreas Bießmann]

On 26.03.2012 14:01, Bernhard Walle wrote:
> With the new option IMAGE_OMAPSD it's possible to create an image for
> OMAP-bootable SD cards. Tested with a devkit8000 and a virtual beagle
> board (qemu).
> 
> See the comment in platforms/image_omapsd.in for more information.
> 
> Signed-off-by: Bernhard Walle <walle@corscience.de>
> ---
>  platforms/image_omapsd.in    |   48 +++++++++++++
>  rules/post/image_omapsd.make |   32 +++++++++
>  scripts/genomapsdimg         |  160 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 240 insertions(+)
>  create mode 100644 platforms/image_omapsd.in
>  create mode 100644 rules/post/image_omapsd.make
>  create mode 100755 scripts/genomapsdimg
> 
> diff --git a/platforms/image_omapsd.in b/platforms/image_omapsd.in
> new file mode 100644
> index 0000000..ef6c5e4
> --- /dev/null
> +++ b/platforms/image_omapsd.in
> @@ -0,0 +1,48 @@
> +## SECTION=image
> +
> +menuconfig IMAGE_OMAPSD
> +	bool
> +	select IMAGE_VFAT_TOOLS
> +	select HOST_PARTED
> +	select IMAGE_EXT2
> +	depends on ARCH_ARM
> +	prompt "Generate OMAP bootable SD card"
> +	help
> +	  Creates an bootable SD card for OMAP CPUs, for example for the beagle board.
> +	  The resulting image is called "omap_sd.img". You can copy it with "dd"
> +	  on a raw SD card, without partitioning.
> +
> +	  The SD card contains two file systems:
> +	    1) A FAT file system that contains MLO, a bootloader and a Linux kernel
> +	       (plus additional files like an initramfs).
> +	    2) The root file system as ext3 file system.

can we make the second ext3 filesystem optional?
Anyway, it could be done in a second step. Would be great to get this
tool into 2012.05!

> +
> +	  OMAP has special requirements regarding the geometry of partition table,
> +	  and the location of MLO, that's why a fixed image makes more sense here
> +	  than copying the files manually.
> +
> +if IMAGE_OMAPSD
> +
> +config IMAGE_OMAPSD_BOOTLOADER
> +	string
> +	default "u-boot.img"
> +	prompt "Bootloader file"
> +	help
> +	  The name of the bootloader that should be copied to the SD card. If you use
> +	  u-boot SPL, then "u-boot.img" is the right choice here. If you still use
> +	  x-loader, then "u-boot.bin" should be copied. Also barebox can be used
> +	  with its MLO. The file must reside in the images directory of the platform.
> +
> +config IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES
> +	string
> +	default ""
> +	prompt "Additional files for the boot partition"
> +	help
> +	  A (whitespace separated) list of additional files can be specified here.
> +	  The files get copied in the boot partition (1st FAT partition). They must
> +	  be in the images/ directory of the platform that is built. One example is
> +	  a uRamdisk that gets loaded by the bootloader.
> +
> +endif
> +
> +# vim: set sw=8 ts=8 noet ft=kconfig:
> diff --git a/rules/post/image_omapsd.make b/rules/post/image_omapsd.make
> new file mode 100644
> index 0000000..3741106
> --- /dev/null
> +++ b/rules/post/image_omapsd.make
> @@ -0,0 +1,32 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2012 by the ptxdist project <ptxdist@pengutronix.de>

your copyright?

> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +SEL_ROOTFS-$(PTXCONF_IMAGE_OMAPSD)		+= $(IMAGEDIR)/omap_sd.img
> +
> +# preprend the $(IMAGEDIR) if PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES is not
> +# empty
> +ifneq ($(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES),"")
> +PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES_FULL := \
> +	$(addprefix $(IMAGEDIR)/, $(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES))
> +endif
> +
> +$(IMAGEDIR)/omap_sd.img: $(IMAGEDIR)/root.ext2
> +	@ln -sf $(IMAGEDIR)/linuximage $(IMAGEDIR)/uImage

alternatively provide a Kconfig option for renaming $(IMAGEDIR)/linuximage?

> +	@echo "Creating bootable SD card for OMAP";					\
> +	PATH=$(PTXCONF_SYSROOT_HOST)/bin:$$PATH $(PTXDIST_TOPDIR)/scripts/genomapsdimg	\
> +		 -m $(IMAGEDIR)/MLO							\
> +		 -b $(IMAGEDIR)/u-boot.img						\

use IMAGE_OMAPSD_BOOTLOADER variable here!

> +		 -k $(IMAGEDIR)/uImage							\
> +		 -f $(IMAGEDIR)/root.ext2						\
> +		 -a "$(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES_FULL)"		\
> +		 -o $@

cleanup $(IMAGEDIR)/uImage?

> +	@echo "done."
> +
> +# vim: syntax=make
> diff --git a/scripts/genomapsdimg b/scripts/genomapsdimg
> new file mode 100755
> index 0000000..9c87e45
> --- /dev/null
> +++ b/scripts/genomapsdimg
> @@ -0,0 +1,160 @@
> +#!/bin/bash

copyright?

> +
> +# Creates a OMAP bootable SD card.
> +# The image has a PC-style partition table with two partitions:
> +#
> +#   1) a FAT partition with MLO, bootloader and a Linux kernel
> +#   2) a ext3 partition with the root file system.
> +#
> +# That's a bit tricky because the OMAP needs a special partition table
> +# (therefore, genpart cannot be used).
> +#
> +# Parts of the script have been copied from 'debian-cd' (post-boot-armel).
> +
> +# exit on error
> +set -e
> +
> +usage() {
> +cat <<-EOF
> +
> +Usage: `basename "$0"` OPTIONS
> +
> +    -h              this help
> +    -m <mlo>        path to the MLO file (SPL)
> +    -b <bootloader> path to the bootloader
> +    -k <kernel>     path to the linux kernel
> +    -a <file>       additional file that should be included in the FAT partition
> +                    (e.g. a FTD or an initramfs). Multiple files can be specified
> +                    using whitespace separation. Don't forget to quote.
> +    -f <filesystem> the (ext3) file system image for the second partition
> +    -o <output>     the output file that should be written
> +
> +EOF
> +}
> +
> +file_length()
> +{
> +	stat -c %s "$1"
> +}
> +
> +create_partitions()
> +{
> +	local boot_size="$((72 * 1024 * 1024))" # 72 MB for the partition
> +	local image_size="$(file_length "${FILESYSTEM}")"
> +	local img_size_blocks="$(((${boot_size} + ${image_size} + 512 - 1) / 512))"
> +
> +	dd if=/dev/zero of="${OUTPUT}" bs=512 count=0 seek="${img_size_blocks}" >/dev/null 2>&1
> +
> +	local trg_size="$(file_length "${OUTPUT}")"
> +	local cylinders=$(echo ${trg_size}/255/63/512 | bc)
> +
> +	{
> +		echo ,9,0x0C,*
> +		echo ,,,-
> +	} | sfdisk -D -H 255 -S 63 -C ${cylinders} "${OUTPUT}" >/dev/null 2>&1

catch possible error (in some tests I didn't had sfdisk in $PATH; took
some time to find this out ;).

> +}
> +
> +check_input()
> +{
> +	if ! [ -r "${MLO}" ] ; then
> +		echo "MLO '${MLO}' does not exist."
> +		usage
> +		exit 1
> +	fi
> +
> +	if ! [ -r "${BOOTLOADER}" ] ; then
> +		echo "Bootloader '${BOOTLOADER}' does not exist."
> +		usage
> +		exit 1
> +	fi
> +
> +	if ! [ -r "${KERNEL}" ] ; then
> +		echo "Kernel '${KERNEL}' does not exist."
> +		usage
> +		exit 1
> +	fi
> +
> +	if ! [ -r "${FILESYSTEM}" ] ; then
> +		echo "File system image '${FILESYSTEM}' does not exist."
> +		usage
> +		exit 1
> +	fi
> +}
> +
> +create_filesystem()
> +{
> +	local vatstart=$(parted "${OUTPUT}" unit B print 2>/dev/null|grep "^ 1"|awk '{print $2}')
> +	local vatsize=$(LANG=C fdisk -l "${OUTPUT}" 2>/dev/null|grep W95 |awk '{print $5}')
> +
> +	mkdosfs -F 32 -C "${OUTPUT_FAT}" "${vatsize}" >/dev/null 2>&1

catch error on tool missing?

> +}
> +
> +copy_files()
> +{
> +	export MTOOLS_SKIP_CHECK=1
> +
> +	# it's important to copy the MLO first
> +	mcopy -i "${OUTPUT_FAT}" "${MLO}" ::MLO
> +	mcopy -i "${OUTPUT_FAT}" "${BOOTLOADER}" "::$(basename "${BOOTLOADER}")"
> +	mcopy -i "${OUTPUT_FAT}" "${KERNEL}" "::$(basename "${KERNEL}")"
> +
> +	# copy additional files (like FTD or an initramfs)
> +	if [ -n "$ADDITIONAL_FILES" ] ; then
> +		for file in ${ADDITIONAL_FILES} ; do
> +			local targetname=$(basename "${file}")
> +			mcopy -i "${OUTPUT_FAT}" "${file}" "::${targetname}"
> +		done
> +	fi
> +}
> +
> +create_image()
> +{
> +	# now put the whole vfat into the first partition
> +	local vatstart=$(parted "${OUTPUT}" unit B print 2>/dev/null | grep "^ 1" | awk '{print $2}')
> +
> +	dd conv=notrunc bs="${vatstart%B}" if="${OUTPUT_FAT}" of="${OUTPUT}" seek=1 >/dev/null 2>&1
> +	rm "${OUTPUT_FAT}"
> +
> +	# put ext3 content into the second partition
> +	local ext3start=$(parted "${OUTPUT}" unit B print 2>/dev/null | grep "^ 2" | awk '{print $2}')
> +	dd conv=notrunc bs="${ext3start%B}" if="${FILESYSTEM}" of="${OUTPUT}" seek=1 >/dev/null 2>&1
> +}
> +
> +
> +# command line parsing
> +
> +while getopts hm:b:k:a:f:o: name ; do
> +	case $name in
> +		m)  MLO="${OPTARG}"
> +			;;
> +		b)  BOOTLOADER="${OPTARG}"
> +			;;
> +		k)  KERNEL="${OPTARG}"
> +			;;
> +		a)  ADDITIONAL_FILES="${OPTARG}"
> +			;;
> +		f)  FILESYSTEM="${OPTARG}"
> +			;;
> +		o)  OUTPUT="${OPTARG}"
> +			;;
> +		h)  usage
> +			exit 0
> +			;;
> +		*)  usage
> +			exit 1
> +			;;
> +	esac
> +done
> +
> +OUTPUT_FAT="${OUTPUT}.vfat"
> +[ -r "${OUTPUT_FAT}" ] && rm "${OUTPUT_FAT}"
> +
> +check_input
> +create_partitions
> +create_filesystem
> +copy_files
> +create_image
> +
> +echo "${OUTPUT} ready"
> +
> +# vim: set sw=4 ts=4 noet:

best regards

Andreas Bießmann

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH 2/2] Allow creation of bootable SD card for OMAP CPUs

[Bernhard Walle]

Hi,

* Andreas Bießmann <biessmann@corscience.de> [2012-04-10 13:32]:
> 
> can we make the second ext3 filesystem optional?
> Anyway, it could be done in a second step. Would be great to get this
> tool into 2012.05!

I would like to get that mainline first and add additional features, if
needed, later.

> > +# -*-makefile-*-
> > +#
> > +# Copyright (C) 2012 by the ptxdist project <ptxdist@pengutronix.de>
> 
> your copyright?

Honestly, I don't care. But I changed it now to be consistent.

> > +#
> > +# See CREDITS for details about who has contributed to this project.
> > +#
> > +# For further information about the PTXdist project and license conditions
> > +# see the README file.
> > +#
> > +
> > +SEL_ROOTFS-$(PTXCONF_IMAGE_OMAPSD)		+= $(IMAGEDIR)/omap_sd.img
> > +
> > +# preprend the $(IMAGEDIR) if PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES is not
> > +# empty
> > +ifneq ($(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES),"")
> > +PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES_FULL := \
> > +	$(addprefix $(IMAGEDIR)/, $(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES))
> > +endif
> > +
> > +$(IMAGEDIR)/omap_sd.img: $(IMAGEDIR)/root.ext2
> > +	@ln -sf $(IMAGEDIR)/linuximage $(IMAGEDIR)/uImage
> 
> alternatively provide a Kconfig option for renaming $(IMAGEDIR)/linuximage?

I fear that breaks too much. 

> > +	@echo "Creating bootable SD card for OMAP";					\
> > +	PATH=$(PTXCONF_SYSROOT_HOST)/bin:$$PATH $(PTXDIST_TOPDIR)/scripts/genomapsdimg	\
> > +		 -m $(IMAGEDIR)/MLO							\
> > +		 -b $(IMAGEDIR)/u-boot.img						\
> 
> use IMAGE_OMAPSD_BOOTLOADER variable here!

Indeed.

> > +		 -k $(IMAGEDIR)/uImage							\
> > +		 -f $(IMAGEDIR)/root.ext2						\
> > +		 -a "$(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES_FULL)"		\
> > +		 -o $@
> 
> cleanup $(IMAGEDIR)/uImage?

Done.

> > index 0000000..9c87e45
> > --- /dev/null
> > +++ b/scripts/genomapsdimg
> > @@ -0,0 +1,160 @@
> > +#!/bin/bash
> 
> copyright?

Added.

> catch possible error (in some tests I didn't had sfdisk in $PATH; took
> some time to find this out ;).

The script was not designed to get executed standalone. But well, I
removed the 'set -e' and added some error messages. Please check.

> > +create_filesystem()
> > +{
> > +	local vatstart=$(parted "${OUTPUT}" unit B print 2>/dev/null|grep "^ 1"|awk '{print $2}')
> > +	local vatsize=$(LANG=C fdisk -l "${OUTPUT}" 2>/dev/null|grep W95 |awk '{print $5}')
> > +
> > +	mkdosfs -F 32 -C "${OUTPUT_FAT}" "${vatsize}" >/dev/null 2>&1
> 
> catch error on tool missing?

It is not missing, it would have no effect because I added 'set -e'. The
script aborts and has no chance to output an error.

But as I mentioned above, I removed 'set -e' and added an error message
here and at some more places.


Regards,
Bernhard


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH 2/2] Allow creation of bootable SD card for OMAP CPUs

[Andreas Bießmann]

Hi,

On 26.03.2012 14:01, Bernhard Walle wrote:
> With the new option IMAGE_OMAPSD it's possible to create an image for
> OMAP-bootable SD cards. Tested with a devkit8000 and a virtual beagle
> board (qemu).
> 
> See the comment in platforms/image_omapsd.in for more information.
> 
> Signed-off-by: Bernhard Walle <walle@corscience.de>
> ---
>  platforms/image_omapsd.in    |   48 +++++++++++++
>  rules/post/image_omapsd.make |   32 +++++++++
>  scripts/genomapsdimg         |  160 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 240 insertions(+)
>  create mode 100644 platforms/image_omapsd.in
>  create mode 100644 rules/post/image_omapsd.make
>  create mode 100755 scripts/genomapsdimg
> 

<snip>

> diff --git a/scripts/genomapsdimg b/scripts/genomapsdimg
> new file mode 100755
> index 0000000..9c87e45
> --- /dev/null
> +++ b/scripts/genomapsdimg
> @@ -0,0 +1,160 @@
> +#!/bin/bash
> +
> +# Creates a OMAP bootable SD card.
> +# The image has a PC-style partition table with two partitions:
> +#
> +#   1) a FAT partition with MLO, bootloader and a Linux kernel
> +#   2) a ext3 partition with the root file system.
> +#
> +# That's a bit tricky because the OMAP needs a special partition table
> +# (therefore, genpart cannot be used).
> +#
> +# Parts of the script have been copied from 'debian-cd' (post-boot-armel).
> +
> +# exit on error
> +set -e
> +
> +usage() {
> +cat <<-EOF
> +
> +Usage: `basename "$0"` OPTIONS
> +
> +    -h              this help
> +    -m <mlo>        path to the MLO file (SPL)
> +    -b <bootloader> path to the bootloader
> +    -k <kernel>     path to the linux kernel
> +    -a <file>       additional file that should be included in the FAT partition
> +                    (e.g. a FTD or an initramfs). Multiple files can be specified
> +                    using whitespace separation. Don't forget to quote.
> +    -f <filesystem> the (ext3) file system image for the second partition
> +    -o <output>     the output file that should be written
> +
> +EOF
> +}
> +
> +file_length()
> +{
> +	stat -c %s "$1"
> +}
> +
> +create_partitions()
> +{
> +	local boot_size="$((72 * 1024 * 1024))" # 72 MB for the partition
> +	local image_size="$(file_length "${FILESYSTEM}")"
> +	local img_size_blocks="$(((${boot_size} + ${image_size} + 512 - 1) / 512))"
> +
> +	dd if=/dev/zero of="${OUTPUT}" bs=512 count=0 seek="${img_size_blocks}" >/dev/null 2>&1
> +
> +	local trg_size="$(file_length "${OUTPUT}")"
> +	local cylinders=$(echo ${trg_size}/255/63/512 | bc)

avoid bc here, drop trg_size:

local cylinders=$(( $(file_length "${OUTPUT}")/255/63/512 ))

rest looks good to me beside already mentioned error handling for used
tools (provide proper messages).

best regards

Andreas Bießmann

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH 2/2] Allow creation of bootable SD card for OMAP CPUs

[Bernhard Walle]

* Andreas Bießmann <biessmann@corscience.de> [2012-04-10 14:01]:
> > +
> > +	dd if=/dev/zero of="${OUTPUT}" bs=512 count=0 seek="${img_size_blocks}" >/dev/null 2>&1
> > +
> > +	local trg_size="$(file_length "${OUTPUT}")"
> > +	local cylinders=$(echo ${trg_size}/255/63/512 | bc)
> 
> avoid bc here, drop trg_size:
> 
> local cylinders=$(( $(file_length "${OUTPUT}")/255/63/512 ))

Using builtin $(()) instead of bc is good but I like to keep trg_size.


Regards,
Bernhard

-- 
ptxdist mailing list
ptxdist@pengutronix.de

[ptxdist] [PATCH v2 1/2] Add host-parted

[Bernhard Walle]

Signed-off-by: Bernhard Walle <walle@corscience.de>
---
 platforms/hosttools.in |    1 +
 rules/host-parted.in   |    8 ++++++++
 rules/host-parted.make |   38 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 47 insertions(+)
 create mode 100644 rules/host-parted.in
 create mode 100644 rules/host-parted.make

diff --git a/platforms/hosttools.in b/platforms/hosttools.in
index e9ce0fc..10d05e8 100644
--- a/platforms/hosttools.in
+++ b/platforms/hosttools.in
@@ -18,6 +18,7 @@ source "rules/host-mkelfImage.in"
 source "rules/host-mtd-utils.in"
 source "rules/host-mtools.in"
 source "rules/host-openssl.in"
+source "rules/host-parted.in"
 source "rules/host-squashfs-tools.in"
 source "rules/host-u-boot-tools.in"
 source "rules/host-util-linux-ng.in"
diff --git a/rules/host-parted.in b/rules/host-parted.in
new file mode 100644
index 0000000..d150ffd
--- /dev/null
+++ b/rules/host-parted.in
@@ -0,0 +1,8 @@
+## SECTION=hosttools_noprompt
+
+config HOST_PARTED
+	bool
+	default ALLYES
+	help
+	  The well-known parted program
+
diff --git a/rules/host-parted.make b/rules/host-parted.make
new file mode 100644
index 0000000..9655f5d
--- /dev/null
+++ b/rules/host-parted.make
@@ -0,0 +1,38 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2006 by Robert Schwebel
+#               2009 by Marc Kleine-Budde <mkl@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_PARTED) += host-parted
+
+#
+# Paths and names
+#
+HOST_PARTED		= $(PARTED)
+HOST_PARTED_DIR		= $(HOST_BUILDDIR)/$(HOST_PARTED)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+HOST_PARTED_ENV 	:= $(HOST_ENV)
+
+#
+# autoconf
+#
+HOST_PARTED_AUTOCONF := $(HOST_AUTOCONF) \
+	--disable-device-mapper \
+	--disable-Werror
+
+HOST_PARTED_INSTALL_OPT := install
+
+# vim: syntax=make
-- 
1.7.10


-- 
ptxdist mailing list
ptxdist@pengutronix.de

[ptxdist] [PATCH v2 2/2] Allow creation of bootable SD card for OMAP CPUs

[Bernhard Walle]

With the new option IMAGE_OMAPSD it's possible to create an image for
OMAP-bootable SD cards. Tested with a devkit8000 and a virtual beagle
board (qemu).

See the comment in platforms/image_omapsd.in for more information.

Signed-off-by: Bernhard Walle <walle@corscience.de>
---
 platforms/image_omapsd.in    |   48 +++++++++++
 rules/host-parted.in         |    3 -
 rules/host-parted.make       |   20 +----
 rules/post/image_omapsd.make |   33 ++++++++
 scripts/genomapsdimg         |  188 ++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 272 insertions(+), 20 deletions(-)
 create mode 100644 platforms/image_omapsd.in
 create mode 100644 rules/post/image_omapsd.make
 create mode 100755 scripts/genomapsdimg

diff --git a/platforms/image_omapsd.in b/platforms/image_omapsd.in
new file mode 100644
index 0000000..ef6c5e4
--- /dev/null
+++ b/platforms/image_omapsd.in
@@ -0,0 +1,48 @@
+## SECTION=image
+
+menuconfig IMAGE_OMAPSD
+	bool
+	select IMAGE_VFAT_TOOLS
+	select HOST_PARTED
+	select IMAGE_EXT2
+	depends on ARCH_ARM
+	prompt "Generate OMAP bootable SD card"
+	help
+	  Creates an bootable SD card for OMAP CPUs, for example for the beagle board.
+	  The resulting image is called "omap_sd.img". You can copy it with "dd"
+	  on a raw SD card, without partitioning.
+
+	  The SD card contains two file systems:
+	    1) A FAT file system that contains MLO, a bootloader and a Linux kernel
+	       (plus additional files like an initramfs).
+	    2) The root file system as ext3 file system.
+
+	  OMAP has special requirements regarding the geometry of partition table,
+	  and the location of MLO, that's why a fixed image makes more sense here
+	  than copying the files manually.
+
+if IMAGE_OMAPSD
+
+config IMAGE_OMAPSD_BOOTLOADER
+	string
+	default "u-boot.img"
+	prompt "Bootloader file"
+	help
+	  The name of the bootloader that should be copied to the SD card. If you use
+	  u-boot SPL, then "u-boot.img" is the right choice here. If you still use
+	  x-loader, then "u-boot.bin" should be copied. Also barebox can be used
+	  with its MLO. The file must reside in the images directory of the platform.
+
+config IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES
+	string
+	default ""
+	prompt "Additional files for the boot partition"
+	help
+	  A (whitespace separated) list of additional files can be specified here.
+	  The files get copied in the boot partition (1st FAT partition). They must
+	  be in the images/ directory of the platform that is built. One example is
+	  a uRamdisk that gets loaded by the bootloader.
+
+endif
+
+# vim: set sw=8 ts=8 noet ft=kconfig:
diff --git a/rules/host-parted.in b/rules/host-parted.in
index d150ffd..0702dea 100644
--- a/rules/host-parted.in
+++ b/rules/host-parted.in
@@ -3,6 +3,3 @@
 config HOST_PARTED
 	bool
 	default ALLYES
-	help
-	  The well-known parted program
-
diff --git a/rules/host-parted.make b/rules/host-parted.make
index 9655f5d..a73c6a5 100644
--- a/rules/host-parted.make
+++ b/rules/host-parted.make
@@ -1,7 +1,6 @@
 # -*-makefile-*-
 #
-# Copyright (C) 2006 by Robert Schwebel
-#               2009 by Marc Kleine-Budde <mkl@pengutronix.de>
+# Copyright (C) 2012 by Bernhard Walle <walle@corscience.de>
 #
 # See CREDITS for details about who has contributed to this project.
 #
@@ -15,24 +14,11 @@
 HOST_PACKAGES-$(PTXCONF_HOST_PARTED) += host-parted
 
 #
-# Paths and names
-#
-HOST_PARTED		= $(PARTED)
-HOST_PARTED_DIR		= $(HOST_BUILDDIR)/$(HOST_PARTED)
-
-# ----------------------------------------------------------------------------
-# Prepare
-# ----------------------------------------------------------------------------
-
-HOST_PARTED_ENV 	:= $(HOST_ENV)
-
-#
 # autoconf
 #
-HOST_PARTED_AUTOCONF := $(HOST_AUTOCONF) \
+HOST_PARTED_CONF_TOOL	:= autoconf
+HOST_PARTED_CONF_OPT	:= $(HOST_AUTOCONF) \
 	--disable-device-mapper \
 	--disable-Werror
 
-HOST_PARTED_INSTALL_OPT := install
-
 # vim: syntax=make
diff --git a/rules/post/image_omapsd.make b/rules/post/image_omapsd.make
new file mode 100644
index 0000000..5131b40
--- /dev/null
+++ b/rules/post/image_omapsd.make
@@ -0,0 +1,33 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2012 by Bernhard Walle <walle@corscience.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+SEL_ROOTFS-$(PTXCONF_IMAGE_OMAPSD)		+= $(IMAGEDIR)/omap_sd.img
+
+# preprend the $(IMAGEDIR) if PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES is not
+# empty
+ifneq ($(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES),"")
+PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES_FULL := \
+	$(addprefix $(IMAGEDIR)/, $(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES))
+endif
+
+$(IMAGEDIR)/omap_sd.img: $(IMAGEDIR)/root.ext2
+	@ln -sf $(IMAGEDIR)/linuximage $(IMAGEDIR)/uImage
+	@echo "Creating bootable SD card for OMAP";					\
+	PATH=$(PTXCONF_SYSROOT_HOST)/bin:$$PATH $(PTXDIST_TOPDIR)/scripts/genomapsdimg	\
+		 -m $(IMAGEDIR)/MLO							\
+		 -b $(IMAGEDIR)/$(PTXCONF_IMAGE_OMAPSD_BOOTLOADER)			\
+		 -k $(IMAGEDIR)/uImage							\
+		 -f $(IMAGEDIR)/root.ext2						\
+		 -a "$(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES_FULL)"		\
+		 -o $@
+	@echo "done."
+	@rm -f $(IMAGEDIR)/uImage
+
+# vim: syntax=make
diff --git a/scripts/genomapsdimg b/scripts/genomapsdimg
new file mode 100755
index 0000000..cd48fd5
--- /dev/null
+++ b/scripts/genomapsdimg
@@ -0,0 +1,188 @@
+#!/bin/bash
+#
+# Copyright (C) 2011 by Bernhard Walle <walle@corscience.de>
+#
+# Creates a OMAP bootable SD card.
+# The image has a PC-style partition table with two partitions:
+#
+#   1) a FAT partition with MLO, bootloader and a Linux kernel
+#   2) a ext3 partition with the root file system.
+#
+# That's a bit tricky because the OMAP needs a special partition table
+# (therefore, genpart cannot be used).
+#
+# Parts of the script have been copied from 'debian-cd' (post-boot-armel).
+
+usage() {
+cat <<-EOF
+
+Usage: `basename "$0"` OPTIONS
+
+    -h              this help
+    -m <mlo>        path to the MLO file (SPL)
+    -b <bootloader> path to the bootloader
+    -k <kernel>     path to the linux kernel
+    -a <file>       additional file that should be included in the FAT partition
+                    (e.g. a FTD or an initramfs). Multiple files can be specified
+                    using whitespace separation. Don't forget to quote.
+    -f <filesystem> the (ext3) file system image for the second partition
+    -o <output>     the output file that should be written
+
+EOF
+}
+
+error()
+{
+	echo >&2 "$@"
+	exit 1
+}
+
+file_length()
+{
+	stat -c %s "$1"
+}
+
+create_partitions()
+{
+	local boot_size="$((72 * 1024 * 1024))" # 72 MB for the partition
+	local image_size="$(file_length "${FILESYSTEM}")"
+	local img_size_blocks="$(((${boot_size} + ${image_size} + 512 - 1) / 512))"
+
+	dd if=/dev/zero of="${OUTPUT}" bs=512 count=0 seek="${img_size_blocks}" >/dev/null 2>&1
+	if [ $? -ne 0 ] ; then
+		error "Unable to create '${OUTPUT}' with 'dd'"
+	fi
+
+	local trg_size="$(file_length "${OUTPUT}")"
+	local cylinders=$(( ${trg_size}/255/63/512 ))
+
+	{
+		echo ,9,0x0C,*
+		echo ,,,-
+	} | sfdisk -D -H 255 -S 63 -C ${cylinders} "${OUTPUT}" >/dev/null 2>&1
+
+	if [ $? -ne 0 ] ; then
+		error "Unable to execute sfdisk"
+	fi
+}
+
+check_input()
+{
+	if ! [ -r "${MLO}" ] ; then
+		echo "MLO '${MLO}' does not exist."
+		usage
+		exit 1
+	fi
+
+	if ! [ -r "${BOOTLOADER}" ] ; then
+		echo "Bootloader '${BOOTLOADER}' does not exist."
+		usage
+		exit 1
+	fi
+
+	if ! [ -r "${KERNEL}" ] ; then
+		echo "Kernel '${KERNEL}' does not exist."
+		usage
+		exit 1
+	fi
+
+	if ! [ -r "${FILESYSTEM}" ] ; then
+		echo "File system image '${FILESYSTEM}' does not exist."
+		usage
+		exit 1
+	fi
+
+	if [ -z "${OUTPUT}" ] ; then
+		echo "You have to specify an output file with -o."
+		usage
+		exit 1
+	fi
+}
+
+create_filesystem()
+{
+	local vatstart=$(parted "${OUTPUT}" unit B print 2>/dev/null|grep "^ 1"|awk '{print $2}')
+	local vatsize=$(LANG=C fdisk -l "${OUTPUT}" 2>/dev/null|grep W95 |awk '{print $5}')
+
+	if ! mkdosfs -F 32 -C "${OUTPUT_FAT}" "${vatsize}" >/dev/null 2>&1 ; then
+		error "Unable to create '${OUTPUT_FAT}' via 'mkdosfs'"
+	fi
+}
+
+copy_files()
+{
+	export MTOOLS_SKIP_CHECK=1
+
+	# it's important to copy the MLO first
+	mcopy -i "${OUTPUT_FAT}" "${MLO}" ::MLO
+	mcopy -i "${OUTPUT_FAT}" "${BOOTLOADER}" "::$(basename "${BOOTLOADER}")"
+	mcopy -i "${OUTPUT_FAT}" "${KERNEL}" "::$(basename "${KERNEL}")"
+
+	# copy additional files (like FTD or an initramfs)
+	if [ -n "$ADDITIONAL_FILES" ] ; then
+		for file in ${ADDITIONAL_FILES} ; do
+			local targetname=$(basename "${file}")
+			if ! mcopy -i "${OUTPUT_FAT}" "${file}" "::${targetname}" ; then
+				error "Unable to copy '${file}' to '${OUTPUT_FAT}'"
+			fi
+		done
+	fi
+}
+
+create_image()
+{
+	# now put the whole vfat into the first partition
+	local vatstart=$(parted "${OUTPUT}" unit B print 2>/dev/null | grep "^ 1" | awk '{print $2}')
+
+	dd conv=notrunc bs="${vatstart%B}" if="${OUTPUT_FAT}" of="${OUTPUT}" seek=1 >/dev/null 2>&1
+	if [ $? -ne 0 ] ; then
+		error "Unable to append '${OUTPUT_FAT}' to '${OUTPUT}'"
+	fi
+	rm "${OUTPUT_FAT}"
+
+	# put ext3 content into the second partition
+	local ext3start=$(parted "${OUTPUT}" unit B print 2>/dev/null | grep "^ 2" | awk '{print $2}')
+	dd conv=notrunc bs="${ext3start%B}" if="${FILESYSTEM}" of="${OUTPUT}" seek=1 >/dev/null 2>&1
+	if [ $? -ne 0 ] ; then
+		error "Unable to append '${FILESYSTEM}' to '${OUTPUT}'"
+	fi
+}
+
+
+# command line parsing
+
+while getopts hm:b:k:a:f:o: name ; do
+	case $name in
+		m)  MLO="${OPTARG}"
+			;;
+		b)  BOOTLOADER="${OPTARG}"
+			;;
+		k)  KERNEL="${OPTARG}"
+			;;
+		a)  ADDITIONAL_FILES="${OPTARG}"
+			;;
+		f)  FILESYSTEM="${OPTARG}"
+			;;
+		o)  OUTPUT="${OPTARG}"
+			;;
+		h)  usage
+			exit 0
+			;;
+		*)  usage
+			exit 1
+			;;
+	esac
+done
+
+OUTPUT_FAT="${OUTPUT}.vfat"
+[ -r "${OUTPUT_FAT}" ] && rm "${OUTPUT_FAT}"
+
+check_input
+create_partitions
+create_filesystem
+copy_files
+create_image
+
+echo "${OUTPUT} ready"
+
+# vim: set sw=4 ts=4 noet:
-- 
1.7.10


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH v2 2/2] Allow creation of bootable SD card for OMAP CPUs

[Bernhard Walle]

* Bernhard Walle <bernhard@bwalle.de> [2012-04-10 17:03]:
> @@ -3,6 +3,3 @@
>  config HOST_PARTED
>  	bool
>  	default ALLYES
> -	help
> -	  The well-known parted program
> -
> diff --git a/rules/host-parted.make b/rules/host-parted.make
> index 9655f5d..a73c6a5 100644
> --- a/rules/host-parted.make
> +++ b/rules/host-parted.make
> @@ -1,7 +1,6 @@
>  # -*-makefile-*-
>  #
> -# Copyright (C) 2006 by Robert Schwebel
> -#               2009 by Marc Kleine-Budde <mkl@pengutronix.de>
> +# Copyright (C) 2012 by Bernhard Walle <walle@corscience.de>
>  #

That's not what I wanted. Wait for v3.


Regards,
Bernhard

-- 
ptxdist mailing list
ptxdist@pengutronix.de

[ptxdist] [PATCH v3 1/2] Add host-parted

[Bernhard Walle]

Signed-off-by: Bernhard Walle <walle@corscience.de>
---
 platforms/hosttools.in |    1 +
 rules/host-parted.in   |    5 +++++
 rules/host-parted.make |   24 ++++++++++++++++++++++++
 3 files changed, 30 insertions(+)
 create mode 100644 rules/host-parted.in
 create mode 100644 rules/host-parted.make

diff --git a/platforms/hosttools.in b/platforms/hosttools.in
index e9ce0fc..10d05e8 100644
--- a/platforms/hosttools.in
+++ b/platforms/hosttools.in
@@ -18,6 +18,7 @@ source "rules/host-mkelfImage.in"
 source "rules/host-mtd-utils.in"
 source "rules/host-mtools.in"
 source "rules/host-openssl.in"
+source "rules/host-parted.in"
 source "rules/host-squashfs-tools.in"
 source "rules/host-u-boot-tools.in"
 source "rules/host-util-linux-ng.in"
diff --git a/rules/host-parted.in b/rules/host-parted.in
new file mode 100644
index 0000000..0702dea
--- /dev/null
+++ b/rules/host-parted.in
@@ -0,0 +1,5 @@
+## SECTION=hosttools_noprompt
+
+config HOST_PARTED
+	bool
+	default ALLYES
diff --git a/rules/host-parted.make b/rules/host-parted.make
new file mode 100644
index 0000000..a73c6a5
--- /dev/null
+++ b/rules/host-parted.make
@@ -0,0 +1,24 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2012 by Bernhard Walle <walle@corscience.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_PARTED) += host-parted
+
+#
+# autoconf
+#
+HOST_PARTED_CONF_TOOL	:= autoconf
+HOST_PARTED_CONF_OPT	:= $(HOST_AUTOCONF) \
+	--disable-device-mapper \
+	--disable-Werror
+
+# vim: syntax=make
-- 
1.7.10


-- 
ptxdist mailing list
ptxdist@pengutronix.de

[ptxdist] [PATCH v3 2/2] Allow creation of bootable SD card for OMAP CPUs

[Bernhard Walle]

With the new option IMAGE_OMAPSD it's possible to create an image for
OMAP-bootable SD cards. Tested with a devkit8000 and a virtual beagle
board (qemu).

See the comment in platforms/image_omapsd.in for more information.

Signed-off-by: Bernhard Walle <walle@corscience.de>
---
 platforms/image_omapsd.in    |   48 +++++++++++
 rules/post/image_omapsd.make |   33 ++++++++
 scripts/genomapsdimg         |  188 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 269 insertions(+)
 create mode 100644 platforms/image_omapsd.in
 create mode 100644 rules/post/image_omapsd.make
 create mode 100755 scripts/genomapsdimg

diff --git a/platforms/image_omapsd.in b/platforms/image_omapsd.in
new file mode 100644
index 0000000..ef6c5e4
--- /dev/null
+++ b/platforms/image_omapsd.in
@@ -0,0 +1,48 @@
+## SECTION=image
+
+menuconfig IMAGE_OMAPSD
+	bool
+	select IMAGE_VFAT_TOOLS
+	select HOST_PARTED
+	select IMAGE_EXT2
+	depends on ARCH_ARM
+	prompt "Generate OMAP bootable SD card"
+	help
+	  Creates an bootable SD card for OMAP CPUs, for example for the beagle board.
+	  The resulting image is called "omap_sd.img". You can copy it with "dd"
+	  on a raw SD card, without partitioning.
+
+	  The SD card contains two file systems:
+	    1) A FAT file system that contains MLO, a bootloader and a Linux kernel
+	       (plus additional files like an initramfs).
+	    2) The root file system as ext3 file system.
+
+	  OMAP has special requirements regarding the geometry of partition table,
+	  and the location of MLO, that's why a fixed image makes more sense here
+	  than copying the files manually.
+
+if IMAGE_OMAPSD
+
+config IMAGE_OMAPSD_BOOTLOADER
+	string
+	default "u-boot.img"
+	prompt "Bootloader file"
+	help
+	  The name of the bootloader that should be copied to the SD card. If you use
+	  u-boot SPL, then "u-boot.img" is the right choice here. If you still use
+	  x-loader, then "u-boot.bin" should be copied. Also barebox can be used
+	  with its MLO. The file must reside in the images directory of the platform.
+
+config IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES
+	string
+	default ""
+	prompt "Additional files for the boot partition"
+	help
+	  A (whitespace separated) list of additional files can be specified here.
+	  The files get copied in the boot partition (1st FAT partition). They must
+	  be in the images/ directory of the platform that is built. One example is
+	  a uRamdisk that gets loaded by the bootloader.
+
+endif
+
+# vim: set sw=8 ts=8 noet ft=kconfig:
diff --git a/rules/post/image_omapsd.make b/rules/post/image_omapsd.make
new file mode 100644
index 0000000..5131b40
--- /dev/null
+++ b/rules/post/image_omapsd.make
@@ -0,0 +1,33 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2012 by Bernhard Walle <walle@corscience.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+SEL_ROOTFS-$(PTXCONF_IMAGE_OMAPSD)		+= $(IMAGEDIR)/omap_sd.img
+
+# preprend the $(IMAGEDIR) if PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES is not
+# empty
+ifneq ($(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES),"")
+PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES_FULL := \
+	$(addprefix $(IMAGEDIR)/, $(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES))
+endif
+
+$(IMAGEDIR)/omap_sd.img: $(IMAGEDIR)/root.ext2
+	@ln -sf $(IMAGEDIR)/linuximage $(IMAGEDIR)/uImage
+	@echo "Creating bootable SD card for OMAP";					\
+	PATH=$(PTXCONF_SYSROOT_HOST)/bin:$$PATH $(PTXDIST_TOPDIR)/scripts/genomapsdimg	\
+		 -m $(IMAGEDIR)/MLO							\
+		 -b $(IMAGEDIR)/$(PTXCONF_IMAGE_OMAPSD_BOOTLOADER)			\
+		 -k $(IMAGEDIR)/uImage							\
+		 -f $(IMAGEDIR)/root.ext2						\
+		 -a "$(PTXCONF_IMAGE_OMAPSD_ADDITIONAL_BOOT_FILES_FULL)"		\
+		 -o $@
+	@echo "done."
+	@rm -f $(IMAGEDIR)/uImage
+
+# vim: syntax=make
diff --git a/scripts/genomapsdimg b/scripts/genomapsdimg
new file mode 100755
index 0000000..cd48fd5
--- /dev/null
+++ b/scripts/genomapsdimg
@@ -0,0 +1,188 @@
+#!/bin/bash
+#
+# Copyright (C) 2011 by Bernhard Walle <walle@corscience.de>
+#
+# Creates a OMAP bootable SD card.
+# The image has a PC-style partition table with two partitions:
+#
+#   1) a FAT partition with MLO, bootloader and a Linux kernel
+#   2) a ext3 partition with the root file system.
+#
+# That's a bit tricky because the OMAP needs a special partition table
+# (therefore, genpart cannot be used).
+#
+# Parts of the script have been copied from 'debian-cd' (post-boot-armel).
+
+usage() {
+cat <<-EOF
+
+Usage: `basename "$0"` OPTIONS
+
+    -h              this help
+    -m <mlo>        path to the MLO file (SPL)
+    -b <bootloader> path to the bootloader
+    -k <kernel>     path to the linux kernel
+    -a <file>       additional file that should be included in the FAT partition
+                    (e.g. a FTD or an initramfs). Multiple files can be specified
+                    using whitespace separation. Don't forget to quote.
+    -f <filesystem> the (ext3) file system image for the second partition
+    -o <output>     the output file that should be written
+
+EOF
+}
+
+error()
+{
+	echo >&2 "$@"
+	exit 1
+}
+
+file_length()
+{
+	stat -c %s "$1"
+}
+
+create_partitions()
+{
+	local boot_size="$((72 * 1024 * 1024))" # 72 MB for the partition
+	local image_size="$(file_length "${FILESYSTEM}")"
+	local img_size_blocks="$(((${boot_size} + ${image_size} + 512 - 1) / 512))"
+
+	dd if=/dev/zero of="${OUTPUT}" bs=512 count=0 seek="${img_size_blocks}" >/dev/null 2>&1
+	if [ $? -ne 0 ] ; then
+		error "Unable to create '${OUTPUT}' with 'dd'"
+	fi
+
+	local trg_size="$(file_length "${OUTPUT}")"
+	local cylinders=$(( ${trg_size}/255/63/512 ))
+
+	{
+		echo ,9,0x0C,*
+		echo ,,,-
+	} | sfdisk -D -H 255 -S 63 -C ${cylinders} "${OUTPUT}" >/dev/null 2>&1
+
+	if [ $? -ne 0 ] ; then
+		error "Unable to execute sfdisk"
+	fi
+}
+
+check_input()
+{
+	if ! [ -r "${MLO}" ] ; then
+		echo "MLO '${MLO}' does not exist."
+		usage
+		exit 1
+	fi
+
+	if ! [ -r "${BOOTLOADER}" ] ; then
+		echo "Bootloader '${BOOTLOADER}' does not exist."
+		usage
+		exit 1
+	fi
+
+	if ! [ -r "${KERNEL}" ] ; then
+		echo "Kernel '${KERNEL}' does not exist."
+		usage
+		exit 1
+	fi
+
+	if ! [ -r "${FILESYSTEM}" ] ; then
+		echo "File system image '${FILESYSTEM}' does not exist."
+		usage
+		exit 1
+	fi
+
+	if [ -z "${OUTPUT}" ] ; then
+		echo "You have to specify an output file with -o."
+		usage
+		exit 1
+	fi
+}
+
+create_filesystem()
+{
+	local vatstart=$(parted "${OUTPUT}" unit B print 2>/dev/null|grep "^ 1"|awk '{print $2}')
+	local vatsize=$(LANG=C fdisk -l "${OUTPUT}" 2>/dev/null|grep W95 |awk '{print $5}')
+
+	if ! mkdosfs -F 32 -C "${OUTPUT_FAT}" "${vatsize}" >/dev/null 2>&1 ; then
+		error "Unable to create '${OUTPUT_FAT}' via 'mkdosfs'"
+	fi
+}
+
+copy_files()
+{
+	export MTOOLS_SKIP_CHECK=1
+
+	# it's important to copy the MLO first
+	mcopy -i "${OUTPUT_FAT}" "${MLO}" ::MLO
+	mcopy -i "${OUTPUT_FAT}" "${BOOTLOADER}" "::$(basename "${BOOTLOADER}")"
+	mcopy -i "${OUTPUT_FAT}" "${KERNEL}" "::$(basename "${KERNEL}")"
+
+	# copy additional files (like FTD or an initramfs)
+	if [ -n "$ADDITIONAL_FILES" ] ; then
+		for file in ${ADDITIONAL_FILES} ; do
+			local targetname=$(basename "${file}")
+			if ! mcopy -i "${OUTPUT_FAT}" "${file}" "::${targetname}" ; then
+				error "Unable to copy '${file}' to '${OUTPUT_FAT}'"
+			fi
+		done
+	fi
+}
+
+create_image()
+{
+	# now put the whole vfat into the first partition
+	local vatstart=$(parted "${OUTPUT}" unit B print 2>/dev/null | grep "^ 1" | awk '{print $2}')
+
+	dd conv=notrunc bs="${vatstart%B}" if="${OUTPUT_FAT}" of="${OUTPUT}" seek=1 >/dev/null 2>&1
+	if [ $? -ne 0 ] ; then
+		error "Unable to append '${OUTPUT_FAT}' to '${OUTPUT}'"
+	fi
+	rm "${OUTPUT_FAT}"
+
+	# put ext3 content into the second partition
+	local ext3start=$(parted "${OUTPUT}" unit B print 2>/dev/null | grep "^ 2" | awk '{print $2}')
+	dd conv=notrunc bs="${ext3start%B}" if="${FILESYSTEM}" of="${OUTPUT}" seek=1 >/dev/null 2>&1
+	if [ $? -ne 0 ] ; then
+		error "Unable to append '${FILESYSTEM}' to '${OUTPUT}'"
+	fi
+}
+
+
+# command line parsing
+
+while getopts hm:b:k:a:f:o: name ; do
+	case $name in
+		m)  MLO="${OPTARG}"
+			;;
+		b)  BOOTLOADER="${OPTARG}"
+			;;
+		k)  KERNEL="${OPTARG}"
+			;;
+		a)  ADDITIONAL_FILES="${OPTARG}"
+			;;
+		f)  FILESYSTEM="${OPTARG}"
+			;;
+		o)  OUTPUT="${OPTARG}"
+			;;
+		h)  usage
+			exit 0
+			;;
+		*)  usage
+			exit 1
+			;;
+	esac
+done
+
+OUTPUT_FAT="${OUTPUT}.vfat"
+[ -r "${OUTPUT_FAT}" ] && rm "${OUTPUT_FAT}"
+
+check_input
+create_partitions
+create_filesystem
+copy_files
+create_image
+
+echo "${OUTPUT} ready"
+
+# vim: set sw=4 ts=4 noet:
-- 
1.7.10


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH 1/2] Add host-parted

[Michael Olbrich]

On Mon, Mar 26, 2012 at 02:01:13PM +0200, Bernhard Walle wrote:
> Signed-off-by: Bernhard Walle <walle@corscience.de>
> ---
>  platforms/hosttools.in |    1 +
>  rules/host-parted.in   |    8 ++++++++
>  rules/host-parted.make |   38 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 47 insertions(+)
>  create mode 100644 rules/host-parted.in
>  create mode 100644 rules/host-parted.make
> 
> diff --git a/platforms/hosttools.in b/platforms/hosttools.in
> index e9ce0fc..10d05e8 100644
> --- a/platforms/hosttools.in
> +++ b/platforms/hosttools.in
> @@ -18,6 +18,7 @@ source "rules/host-mkelfImage.in"
>  source "rules/host-mtd-utils.in"
>  source "rules/host-mtools.in"
>  source "rules/host-openssl.in"
> +source "rules/host-parted.in"
>  source "rules/host-squashfs-tools.in"
>  source "rules/host-u-boot-tools.in"
>  source "rules/host-util-linux-ng.in"
> diff --git a/rules/host-parted.in b/rules/host-parted.in
> new file mode 100644
> index 0000000..d150ffd
> --- /dev/null
> +++ b/rules/host-parted.in
> @@ -0,0 +1,8 @@
> +## SECTION=hosttools_noprompt
> +
> +config HOST_PARTED
> +	bool
> +	default ALLYES
> +	help
> +	  The well-known parted program

no need for help in noprompt options

> +
> diff --git a/rules/host-parted.make b/rules/host-parted.make
> new file mode 100644
> index 0000000..9655f5d
> --- /dev/null
> +++ b/rules/host-parted.make
> @@ -0,0 +1,38 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2006 by Robert Schwebel
> +#               2009 by Marc Kleine-Budde <mkl@pengutronix.de>

Shouldn't this be your copyright?

> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +HOST_PACKAGES-$(PTXCONF_HOST_PARTED) += host-parted
> +


> +#
> +# Paths and names
> +#
> +HOST_PARTED		= $(PARTED)
> +HOST_PARTED_DIR		= $(HOST_BUILDDIR)/$(HOST_PARTED)

remove

> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +HOST_PARTED_ENV 	:= $(HOST_ENV)

remove

> +
> +#
> +# autoconf
> +#
> +HOST_PARTED_AUTOCONF := $(HOST_AUTOCONF) \
> +	--disable-device-mapper \
> +	--disable-Werror

I'd like to see CONF_TOOL/CONF_OPT in new packages.

Take a look at e.g. rules/host-ncurses.make to see what's necessary.

> +
> +HOST_PARTED_INSTALL_OPT := install

Isn't that the default anyways?

> +
> +# vim: syntax=make
> -- 
> 1.7.9.4
> 
> 
> -- 
> ptxdist mailing list
> ptxdist@pengutronix.de
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de