Re: [ptxdist] ?==?utf-8?q? ?==?utf-8?q? [PATCH] opencv: added option to build/install python bindings

["Artur Wiebe" <artur@4wiebe.de>]

HI Michael,
 
On Tuesday, September 22, 2020 12:16 CEST, Michael Olbrich <m.olbrich@pengutronix.de> wrote: 
 
> On Wed, Sep 16, 2020 at 01:19:28PM +0200, Artur Wiebe wrote:
> > Signed-off-by: Artur Wiebe <artur@4wiebe.de>
> > ---
> >  rules/opencv.in   |  7 +++++++
> >  rules/opencv.make | 17 +++++++++++++----
> >  2 files changed, 20 insertions(+), 4 deletions(-)
> > 
> > diff --git a/rules/opencv.in b/rules/opencv.in
> > index 328786aed..bbf907b64 100644
> > --- a/rules/opencv.in
> > +++ b/rules/opencv.in
> > @@ -16,6 +16,7 @@ menuconfig OPENCV
> >  	select V4L_UTILS		if OPENCV_V4L_LIBV4L2
> >  	select V4L_UTILS_LIBV4L1	if OPENCV_V4L_LIBV4L2
> >  	select V4L_UTILS_LIBV4L2	if OPENCV_V4L_LIBV4L2
> > +	select PYTHON3_NUMPY	if OPENCV_PYTHON
> >  	help
> >  	  Open Source Computer Vision Library
> >  
> > @@ -140,6 +141,12 @@ config OPENCV_QT
> >  	help
> >  	  QT GUI Support
> >  
> > +config OPENCV_PYTHON
> > +	bool
> > +	prompt "Python bindings"
> > +	help
> > +	  Python bindings
> > +
> >  config OPENCV_EXAMPLES
> >  	bool
> >  	prompt "Build Examples"
> > diff --git a/rules/opencv.make b/rules/opencv.make
> > index 8da4beb98..3e5ac8b2b 100644
> > --- a/rules/opencv.make
> > +++ b/rules/opencv.make
> > @@ -35,7 +35,7 @@ OPENCV_BUILD_DIR := $(OPENCV_DIR)-build
> >  
> >  OPENCV_CONF_TOOL	:= cmake
> >  
> > -# Note: not configure_helper.py does not show some options that are only
> > +# Note: configure_helper.py does not show some options that are only
> >  # valid on other architectures. Run is for ARM and x86_64 and mix the results.
> >  # Variables that are not shown by configure_helper.py are added at the end.
> >  OPENCV_CONF_OPT		:= \
> > @@ -78,7 +78,8 @@ OPENCV_CONF_OPT		:= \
> >  	-DBUILD_opencv_ml=$(call ptx/onoff,PTXCONF_OPENCV_ML) \
> >  	-DBUILD_opencv_objdetect=$(call ptx/onoff,PTXCONF_OPENCV_OBJDETECT) \
> >  	-DBUILD_opencv_photo=$(call ptx/onoff,PTXCONF_OPENCV_PHOTO) \
> > -	-DBUILD_opencv_python_bindings_generator=ON \
> > +	-DBUILD_opencv_python3=$(call ptx/onoff,PTXCONF_OPENCV_PYTHON) \
> 

My configure_helper.py shows this exactly on this place (maybe only with other python options set?).

> This option should remain at the end with all other options that are not
> visible with configure_helper.py
> 
> > +	-DBUILD_opencv_python_bindings_generator=$(call ptx/onoff,PTXCONF_OPENCV_PYTHON) \
> >  	-DBUILD_opencv_python_tests=ON \
> >  	-DBUILD_opencv_stitching=$(call ptx/onoff,PTXCONF_OPENCV_STITCHING) \
> >  	-DBUILD_opencv_ts=OFF \
> > @@ -130,9 +131,11 @@ OPENCV_CONF_OPT		:= \
> >  	-DOPENCV_GENERATE_SETUPVARS=ON \
> >  	-DOPENCV_IPP_GAUSSIAN_BLUR=OFF \
> >  	-DOPENCV_MATHJAX_RELPATH=https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.0 \
> > -	-DOPENCV_PYTHON3_VERSION=OFF \
> > +	-DOPENCV_PYTHON3_VERSION=$(PYTHON3_MAJORMINOR) \
> >  	-DOPENCV_WARNINGS_ARE_ERRORS=OFF \
> >  	-DPROTOBUF_UPDATE_FILES=OFF \
> > +	-DPYTHON3_EXECUTABLE=$(PTXDIST_SYSROOT_CROSS)/bin/python$(PYTHON3_MAJORMINOR) \
> > +	-DPYTHON3_NUMPY_INCLUDE_DIRS=$(PTXDIST_SYSROOT_TARGET)$(PYTHON3_SITEPACKAGES)/numpy/core/include/ \
> >  	-DWITH_1394=OFF \
> >  	-DWITH_ADE=OFF \
> >  	-DWITH_ARAVIS=OFF \
> > @@ -203,7 +206,10 @@ OPENCV_CONF_OPT		:= \
> >  	\
> >  	-DCMAKE_SKIP_RPATH=ON \
> >  	-DBUILD_opencv_python2=OFF \
> > -	-DBUILD_opencv_python3=OFF
> > +	-DPYTHON_INCLUDE_DIR=$(PTXDIST_SYSROOT_TARGET)/usr/include/python$(PYTHON3_MAJORMINOR)m \
> > +	-DPYTHON_LIBRARY=$(PTXDIST_SYSROOT_TARGET)/bin/python$(PYTHON3_MAJORMINOR) \
> 

These variables are described here: https://docs.opencv.org/master/d7/d9f/tutorial_linux_install.html
I tried with the ones from configure_helper.py, but it does not work. During prepare configure tells to set the options above!

> Hmmm, from what I can tell, you can use PYTHON3_INCLUDE_DIR and
> PYTHON3_LIBRARY here to make it explicit. And configure_helper.py knows
> about PYTHON3_LIBRARY, so move it to the correct location.
> 
> Michael
> 
> > +	-DOPENCV_PYTHON3_INSTALL_PATH=$(PYTHON3_SITEPACKAGES) \
> > +	-DOPENCV_SKIP_PYTHON_LOADER=ON
> >  
> >  
> >  $(STATEDIR)/opencv.install:
> > @@ -243,6 +249,9 @@ $(STATEDIR)/opencv.targetinstall:
> >  		$(call install_lib, opencv, 0, 0, 0644, $(lib))$(ptx/nl))
> >  ifdef PTXCONF_OPENCV_EXAMPLES
> >  	@$(call install_tree, opencv, 0, 0, $(OPENCV_BUILD_DIR)/bin, /bin)
> > +endif
> > +ifdef PTXCONF_OPENCV_PYTHON
> > +	@$(call install_tree, opencv, 0, 0, -, $(PYTHON3_SITEPACKAGES))
> 

Actually only "/usr/lib/python3.7/site-packages/cv2.cpython-37m-x86_64-linux-gnu.so" is installed (on my platform). I didn't want to code the name from x variables...

> What's installed here? Just .py files? Or are .pyc files generated
> correctly?
> 
> Michael
> 
> >  endif
> >  	@$(call install_finish, opencv)
> >  	@$(call touch)
> > -- 
> > 2.28.0
> > 
> > 
> > _______________________________________________
> > ptxdist mailing list
> > ptxdist@pengutronix.de
> > To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de